August 2013 - macports-tickets - lists.macosforge.org

[MacPorts] #40078: py27-sympy build fails
by MacPorts 14 Aug '13

14 Aug '13

#40078: py27-sympy build fails -----------------------+-------------------------------- Reporter: istlota@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: py27-sympy -----------------------+-------------------------------- Today, weeks after the last time I ran code which imports sympy, I ran it again and the code failed with a runtime error indicating some problem while importing sympy. This is code that worked fine a few weeks ago when python27 was specifically v2.7.3 . This is the first time I have done anything with sympy since I upgraded python27 to v2.7.5 . I port uninstalled py27-sympy and attempted to reinstall it. That now fails during building with an error in the main.log which I have zipped and attached. -- Ticket URL: <https://trac.macports.org/ticket/40078> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #40092: gcc47 hangs on build
by MacPorts 14 Aug '13

14 Aug '13

#40092: gcc47 hangs on build --------------------------+-------------------------------- Reporter: phildobbin@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: gcc47 | Port: gcc47 --------------------------+-------------------------------- I had a problem with libgcc which hung when trying to install but I finally got it installed. Now gcc47 hangs interminably. I just tried for two hours to install & cpp was working (taking up 93% of the CPU) but it seemed stuck. Surely this can't be right. How long is the usual install time? Also, I never installed either of these ports so I'm mystified as to why they're there in the first place. -- Ticket URL: <https://trac.macports.org/ticket/40092> MacPorts <http://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #40094: pgAdmin3 uses --with-arch-x86_64
by MacPorts 13 Aug '13

13 Aug '13

#40094: pgAdmin3 uses --with-arch-x86_64 --------------------------+---------------------- Reporter: ryandesign@… | Owner: jwa@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: pgAdmin3 --------------------------+---------------------- The pgAdmin3 port uses the configure arg "--with-arch-x86_64". This presumably won't work on ppc, ppc64 or i386 Macs. If really only x86_64 will work for this port, then that should be indicated by setting "supported_archs x86_64". But I do see these flags in output from "./configure --help": {{{ --with-arch-i386 include an i386 image in an OS X Universal build --with-arch-x86_64 include an x86_64 image in an OS X Universal build --with-arch-ppc include a PPC image in an OS X Universal build --with-arch-ppc64 include a PPC64 image in an OS X Universal build }}} This suggests any Mac arch should work. What does the --with-arch-x86_64 flag do that MacPorts' default inclusion of -arch flags doesn't do? Maybe the flag could simply be removed. Maybe the universal variant could be enabled. -- Ticket URL: <https://trac.macports.org/ticket/40094> MacPorts <http://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #40089: libgcc45 @4.5.4_8 still broken after rebuilding 3 times
by MacPorts 13 Aug '13

13 Aug '13

#40089: libgcc45 @4.5.4_8 still broken after rebuilding 3 times -----------------------------------+-------------------------------- Reporter: schnitzenhymerstine@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: libgcc45 -----------------------------------+-------------------------------- I'm on OSX 10.8.4 with Xcode 4.6.3. When installing ports it keeps finding "1 broken file(s), matching files to ports" related to libgcc45. It says Error: Port libgcc45 is still broken after rebuilding it more than 3 times. Error: Please run port -d -y rev-upgrade and use the output to report a bug. and I didn't see another ticket for this. I'll attach the result from running sudo port -d -y rev-upgrade. -- Ticket URL: <https://trac.macports.org/ticket/40089> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #40091: Updated swi-prolog-devel portfile for version 6.5.1
by MacPorts 13 Aug '13

13 Aug '13

#40091: Updated swi-prolog-devel portfile for version 6.5.1 ---------------------------------+-------------------------------- Reporter: pmoura@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: haspatch maintainer | Port: swi-prolog-devel ---------------------------------+-------------------------------- Updated swi-prolog-devel portfile for version 6.5.1. -- Ticket URL: <https://trac.macports.org/ticket/40091> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #40086: dblatex @0.3.4 - compile failure in Poppler
by MacPorts 13 Aug '13

13 Aug '13

#40086: dblatex @0.3.4 - compile failure in Poppler ------------------------------+-------------------------------- Reporter: duboisj@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: dblatex, poppler | Port: dblatex ------------------------------+-------------------------------- I am trying to install dblatex on OS X 10.8.4 with the following command: {{{ sudo port -v install dblatex +no_x11 }}} I have the command-line tools from XCode 4.6.3 installed. I get the following error trying to install Poppler (seemingly a dependency): {{{ libtool: link: ( cd ".libs" && rm -f "libpoppler-glib.la" && ln -s "../libpoppler-glib.la" "libpoppler-glib.la" ) /opt/local/bin/g-ir-scanner --add-include-path=. --warn-all --namespace=Poppler --nsversion=0.18 --libtool="/bin/sh ../libtool" --include=GObject-2.0 --include=Gio-2.0 --include=cairo-1.0 --pkg-export =poppler-glib --library=libpoppler-glib.la --c-include poppler.h --cflags-begin -DG_LOG_DOMAIN=\"Poppler\" -I.. -I../poppler -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng15 -I/opt/local/include/freetype2 -I/opt/local/include -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -I.. --cflags-end poppler-enums.c poppler-enums.h poppler-action.cc poppler-date.cc poppler-document.cc poppler-page.cc poppler-attachment.cc poppler-form-field.cc poppler-annot.cc poppler-layer.cc poppler-media.cc poppler-movie.cc poppler-cached-file-loader.cc poppler-cached-file- loader.h poppler-input-stream.cc poppler.cc poppler-action.h poppler- date.h poppler-document.h poppler-page.h poppler-attachment.h poppler- form-field.h poppler-annot.h poppler-layer.h poppler-media.h poppler- movie.h poppler.h poppler-features.h libpoppler-glib.la --output Poppler-0.18.gir Traceback (most recent call last): File "/opt/local/bin/g-ir-scanner", line 44, in <module> from giscanner.scannermain import scanner_main File "/opt/local/lib/gobject-introspection/giscanner/scannermain.py", line 34, in <module> from giscanner.dumper import compile_introspection_binary File "/opt/local/lib/gobject-introspection/giscanner/dumper.py", line 28, in <module> from .gdumpparser import IntrospectionBinary File "/opt/local/lib/gobject-introspection/giscanner/gdumpparser.py", line 31, in <module> from .transformer import TransformerException File "/opt/local/lib/gobject-introspection/giscanner/transformer.py", line 27, in <module> from .girparser import GIRParser File "/opt/local/lib/gobject-introspection/giscanner/girparser.py", line 26, in <module> from .girwriter import COMPATIBLE_GIR_VERSION File "/opt/local/lib/gobject-introspection/giscanner/girwriter.py", line 25, in <module> from .xmlwriter import XMLWriter File "/opt/local/lib/gobject-introspection/giscanner/xmlwriter.py", line 93, in <module> from giscanner._giscanner import collect_attributes ImportError: dlopen(/opt/local/lib/gobject- introspection/giscanner/_giscanner.so, 2): Library not loaded: /opt/local/lib/libgio-2.0.0.dylib Referenced from: /opt/local/lib/gobject- introspection/giscanner/_giscanner.so Reason: Incompatible library version: _giscanner.so requires version 3601.0.0 or later, but libgio-2.0.0.dylib provides version 3201.0.0 make[4]: *** [Poppler-0.18.gir] Error 1 make[4]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.24.0/glib' make[3]: *** [all-recursive] Error 1 make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.24.0/glib' make[2]: *** [all] Error 2 make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.24.0/glib' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.24.0' make: *** [all] Error 2 make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.24.0' Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/work/poppler-0.24.0" && /usr/bin/make -j5 -w all CC="/usr/bin/clang -arch x86_64" Exit code: 2 Error: org.macports.build for port poppler returned: command execution failed Warning: targets not executed for poppler: org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Failed to install poppler Please see the log file for port poppler for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_poppler/poppler/main.log Error: The following dependencies were not installed: texlive-latex-extra texlive-bin poppler t1lib texlive-common texlive-latex-recommended pgf texlive-basic texlive-latex texlive-pictures texlive-math-extra texlive- fonts-recommended To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port dblatex failed }}} -- Ticket URL: <https://trac.macports.org/ticket/40086> MacPorts <http://www.macports.org/> Ports system for OS X

1 8

[MacPorts] #40052: unison 2.40.102 won't build
by MacPorts 13 Aug '13

13 Aug '13

#40052: unison 2.40.102 won't build -----------------------+-------------------------------- Reporter: neukomp@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: unison -----------------------+-------------------------------- Using sudo port install unison +aqua, the build fails with following error. {{{ build error: There is no SDK with the name or path '/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.5.sdk' }}} I'm on OSX 10.8 and typically only build for 10.8. (Sometime for 10.7 & 10.6) but this port won't build because I don't have 10.5 sdk installed. -- Ticket URL: <https://trac.macports.org/ticket/40052> MacPorts <http://www.macports.org/> Ports system for OS X

1 10

[MacPorts] #37839: webkit-gtk: ld: scattered reloc r_address too large
by MacPorts 13 Aug '13

13 Aug '13

#37839: webkit-gtk: ld: scattered reloc r_address too large --------------------------+------------------------ Reporter: ryandesign@… | Owner: jeremyhu@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: powerpc | Port: webkit-gtk --------------------------+------------------------ After patching it to remove the assertion that triggered #35989, webkit- gtk fails to build on PowerPC G4 on Leopard with this message: {{{ ld: scattered reloc r_address too large }}} I see that GHCi had this problem, and fixed it by using the .a files: http://hackage.haskell.org/trac/ghc/ticket/3260 In case it matters, ld64 @97.17_2+llvm31 is installed and active. It builds fine on Leopard i386. -- Ticket URL: <https://trac.macports.org/ticket/37839> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 20

[MacPorts] #40068: subversion: change dependency on curl-ca-bundle to support certsync
by MacPorts 13 Aug '13

13 Aug '13

#40068: subversion: change dependency on curl-ca-bundle to support certsync -------------------------+------------------------ Reporter: cal@… | Owner: blair@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: subversion -------------------------+------------------------ Please modify the dependency on curl-ca-bundle in subversion to support the new certsync port (see #35474 for discussion). I'm attaching a patch to do this. -- Ticket URL: <https://trac.macports.org/ticket/40068> MacPorts <http://www.macports.org/> Ports system for OS X

1 13

[MacPorts] #40064: py27-wxpython-devel@2.9.4.0_0 build failure
by MacPorts 13 Aug '13

13 Aug '13

#40064: py27-wxpython-devel(a)2.9.4.0_0 build failure ----------------------------+--------------------------------- Reporter: yves_fleming@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: py27-wxpython-devel ----------------------------+--------------------------------- When compiling py-wxpython-devel on my mac, it does not complete successfully. I use MacOs X 10.7 with XCode 4.6.3... -- Ticket URL: <https://trac.macports.org/ticket/40064> MacPorts <http://www.macports.org/> Ports system for OS X

1 2