March 2014 - macports-tickets - lists.macosforge.org

[MacPorts] #24001: curl-7.20 +universal destroot fail
by MacPorts 30 Mar '14

30 Mar '14

#24001: curl-7.20 +universal destroot fail ------------------------------+--------------------------------------------- Reporter: ToePeu@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: curl destroot | Port: curl ------------------------------+--------------------------------------------- it raise error because ppc and intel has different curl-config file its difference is occured by --configure options: echo " '--prefix=/opt/local' '--enable-ipv6' '--without-gnutls' '--without-gssapi' '--without-libssh2' '--without-spnego' '--disable-ares' '--disable-ldap' '--disable-ldaps' '--with-libidn' '--with- zlib=/opt/local' '--disable-dependency-tracking' '--with-ssl' '--with-ca- bundle=/opt/local/share/curl/curl-ca-bundle.crt' 'CC=/usr/bin/gcc-4.2' 'CFLAGS=-O2 ' 'LDFLAGS=-L/opt/local/lib ' 'CPPFLAGS=-I/opt/local/include'" is for intel, but for ppc, it has more ppc-related options it raise merge failure in destroot path since i removed difference of both curl-config as fake, problem resolved. i think there should not be check curl-config here. ps. when i failed to destroot, and tried -d to make report, destroot failed for everything because it could not recover its state before destroot. it was terrible and i should remove some output of destroot manually. -- Ticket URL: <http://trac.macports.org/ticket/24001> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 16

[MacPorts] #39384: ikiwiki port installs perllocal.pod
by MacPorts 30 Mar '14

30 Mar '14

#39384: ikiwiki port installs perllocal.pod ---------------------------+-------------------------------- Reporter: allbery.b@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: perllocal.pod | Port: ikiwiki ---------------------------+-------------------------------- I am under the impression that Perl ports are not supposed to try to create e.g. /opt/local/lib/perl5/5.12.4/darwin-thread-multi- 2level/perllocal.pod? The ikiwiki port just gave me {{{ Error: org.macports.activate for port ikiwiki returned: Image error: /opt/local/lib/perl5/5.12.4/darwin-thread-multi-2level/perllocal.pod already exists and does not belong to a registered port. Unable to activate port ikiwiki. Use 'port -f activate ikiwiki' to force the activation. }}} (that having been created by a local CPAN install of extension modules for re.pl). -- Ticket URL: <https://trac.macports.org/ticket/39384> MacPorts <http://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #43060: qgis and pyqt4-devel
by MacPorts 30 Mar '14

30 Mar '14

#43060: qgis and pyqt4-devel -------------------------------+-------------------------------- Reporter: barry.j.mcinnes@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: qgis pyqt4 | Port: qgis -------------------------------+-------------------------------- qgis fails as it depends on py27-pyqt4-devel, which is replaced by py27-pyqt4 port info qgis qgis @2.2.0 (gis) Variants: debug, grass, postgis, [+]postgis2, postgresql91, [+]postgresql92, postgresql93, python26, [+]python27, universal Description: QGIS is a GIS. It can visualize, inject data into PostGres/PostGIS, or serve as a Qt front-end to Grass. Extended with Python plugins, it can become a quite powerful GIS on its own. Homepage: http://www.qgis.org/ Build Dependencies: cmake, pkgconfig, bison, ld64, py27-sip Library Dependencies: qt4-mac, libiconv, expat, openssl, proj, geos, gdal, sqlite3, gsl, qwt52, fcgi, spatialindex, py27-pyqt4-devel, py27-qscintilla, postgresql92, postgis2 Runtime Dependencies: py27-psycopg2, py27-spatialite Platforms: darwin License: GPL Maintainers: vince(a)macports.org port install qgis -py27-pyqt4-devel ---> Computing dependencies for qgis ---> Dependencies to be installed: py27-pyqt4-devel ---> Applying patches to py27-pyqt4-devel Error: org.macports.patch for port py27-pyqt4-devel returned: command execution failed Error: Failed to install py27-pyqt4-devel Please see the log file for port py27-pyqt4-devel for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_python_py-pyqt4/py27-pyqt4-devel/main.log Error: The following dependencies were not installed: py27-pyqt4-devel To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port qgis failed -- Ticket URL: <https://trac.macports.org/ticket/43060> MacPorts <http://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #43112: cyrus-imapd fails on build
by MacPorts 30 Mar '14

30 Mar '14

#43112: cyrus-imapd fails on build ---------------------------+-------------------------------- Reporter: horst.simon@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: cyrus-imapd ---------------------------+-------------------------------- Looks like the included Perl XS module is not compatible with perl 5.16, possibly due to incorrect/incomplete includes; it's complaining about expansion of various XS macros referring to named like sv_undef, sv_yes, sv_no which are part of the Perl core. I have the main.log file attached -- Ticket URL: <https://trac.macports.org/ticket/43112> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #43120: abinit 7.4.3: update to revision 1
by MacPorts 30 Mar '14

30 Mar '14

#43120: abinit 7.4.3: update to revision 1 ------------------------+-------------------------------- Reporter: cram5431@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: abinit ------------------------+-------------------------------- Abinit 7.4.3: update to revision 1: - use of compilers and mpi portgroups - automatic detection of selected mpi - addition of fftw3-single dependency - addition of no_mpi variant Ticket for revision 0: #42017 -- Ticket URL: <https://trac.macports.org/ticket/43120> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #24507: Ports that need special attention get lost in long outputs
by MacPorts 29 Mar '14

29 Mar '14

#24507: Ports that need special attention get lost in long outputs ---------------------------------+------------------------------------------ Reporter: keybounce@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: ---------------------------------+------------------------------------------ Installing some ports (such as 'gimp2') result in installing many, many dependencies. Some of these have special steps that you need to take. These are displayed on the screen, and scroll way up, and can be lost. Nothing calls attention to them at the end, and they are not stored anywhere in the MacPorts system for later review. -- Ticket URL: <http://trac.macports.org/ticket/24507> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 7

[MacPorts] #43113: clang-3.1 @3.1_7 fails checking out libcxx from trunk on a 10.5.8. PPC
by MacPorts 29 Mar '14

29 Mar '14

#43113: clang-3.1 @3.1_7 fails checking out libcxx from trunk on a 10.5.8. PPC ------------------------+-------------------------------- Reporter: braumann@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: leopard | Port: clang-3.1 ------------------------+-------------------------------- While trying to install clang-3.1 (to me this appears to be the last clang version capable to work for PPC) I got some trouble during the extraction phase: {{{ :debug:extract Executing proc-post-org.macports.extract-extract-0 :info:extract sh: line 1: 61751 Bus error svn co -r 156798 http://llvm.org/svn/llvm-project/libcxx/trunk libcxx :info:extract Command failed: cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_llvm-3.1/clang-3.1/work/llvm-3.1.src/projects && svn co -r 156798 http://llvm.org/svn/llvm-project/libcxx/trunk libcxx :info:extract Exit code: 138 :error:extract org.macports.extract for port clang-3.1 returned: command execution failed }}} Please see the main.log -- Ticket URL: <https://trac.macports.org/ticket/43113> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #43118: FrEe Meath vs Down live GAA Online Hd Tv Channel
by MacPorts 29 Mar '14

29 Mar '14

#43118: FrEe Meath vs Down live GAA Online Hd Tv Channel -------------------------------------------------+------------------------- Reporter: mdajom57@… | Owner: macports- Type: defect | tickets@… Priority: Normal | Status: new Component: ports | Milestone: Keywords: Meath vs Down Live Stream Free, | Version: 2.2.1 Meath vs Down live super rugby Online Stream | Port: 2014, GAA kick off Meath vs Down free | streaming, | -------------------------------------------------+------------------------- FrEe Meath vs Down live GAA Online Hd Tv Channel,Allianz Meath vs Down live stream & TV GAA Football 2014 March 29th . Meath vs Down TV Schedule, Channels, Radio Stations, Start Time . Watch Allianz GAA Football 2014 games online ! Viewing options vary by country. Find your region below to find out how you can stream GAA Football games online . GAA Football live Here – http://w.atch.me/qkA4PY Meath vs Down Live Stream Free, Meath vs Down live super rugby Online Stream 2014, GAA kick off Meath vs Down free streaming, Watch Meath vs Down GAA Online, How to Watch Meath vs Down : Super XV Rugby Online on SKY TV ?, Meath vs Down Live Stream Rugby 2014, Stream online Reds v Stormers live on TV, Watch Meath vs Down GAA Games Online -- Ticket URL: <https://trac.macports.org/ticket/43118> MacPorts <http://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #43054: The new portfile for pt-graph-tool stuck at building stage
by MacPorts 29 Mar '14

29 Mar '14

#43054: The new portfile for pt-graph-tool stuck at building stage ---------------------------+-------------------------------- Reporter: absima@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: py-graph-tool | Port: ---------------------------+-------------------------------- I have 2 upgraded macs (from lion to mnt lion + from leopard to lion). Last time I have graph-tool configuration issues on both of them as reported in [https://trac.macports.org/ticket/40072 Ticket #40072]. Editing the Portfile then as suggested in [https://trac.macports.org/changeset/109300 r109300] solved the issue. Recently, I have updated the port using {{{sudo port -v selfupdate }}}. Then as I {{{upgrade outdated }}}, the process got stuck for a couple of hours at {{{---> building py27-graph-tool}}} I then tried replacing the portfile by removing the following line, like the suggestion in [https://trac.macports.org/changeset/109300 r109300] {{{PYTHON_LDFLAGS="-L${python.libdir}/.. -lpython${python.branch}" }}} so that it uses the following instead {{{PYTHON_EXTRA_LDFLAGS="-L${python.libdir}/.. -lpython${python.branch}"}}} This didn't solve the issue. Still stuck at building process. I hope the issue might be known since these are the same laptops I reported about in the aforementioned ticket. Please, let me know if I could provide the log/main files like last time so that I could get it work again. Thanks -- Ticket URL: <https://trac.macports.org/ticket/43054> MacPorts <http://www.macports.org/> Ports system for OS X

1 8

[MacPorts] #38951: rdesktop +smartcard errors on 10.6.8 64bit
by MacPorts 29 Mar '14

29 Mar '14

#38951: rdesktop +smartcard errors on 10.6.8 64bit --------------------------+-------------------------------- Reporter: ian.cheong@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: --------------------------+-------------------------------- Trying to build rdesktop +smartcard on Snow Leopard. Only two errors. 1. trying to look for lib64, which apparently does not exist on MacOS fudged past that one by making a symlink /opt/local/lib64->/opt/local/lib 2. missing symbols ??from pcsc-lite :info:build Undefined symbols: :info:build "_SCARD_CTL_CODE", referenced from: :info:build _TS_SCardControl in scard.o :info:build _TS_SCardControl in scard.o :info:build ld: symbol(s) not found I had been playing around with various fixes including some suggestions found that rdesktop 1.6.x worked and grafting in some code from scard.c from 1.6 https://discussions.apple.com/message/15301873#15301873 Previous to try rdesktop, I had been trying FreeRDP without success. So I did manage to get rdesktop +smartcard to build... $ sudo port install rdesktop +smartcard Password: ---> Computing dependencies for rdesktop ---> Building rdesktop ---> Staging rdesktop into destroot ---> Installing rdesktop @1.7.1_0+smartcard ---> Activating rdesktop @1.7.1_0+smartcard ---> Cleaning rdesktop ---> Updating database of binaries: 100.0% ---> Scanning binaries for linking errors: 100.0% ---> No broken files found. And I could talk to RDP server with smartcard showing up. In trying to document what the fix was, I cleaned out the macports install and tried to replicate the necessary parts and can't get it to work again yet : ( -- Ticket URL: <https://trac.macports.org/ticket/38951> MacPorts <http://www.macports.org/> Ports system for OS X

1 6