April 2014 - macports-tickets - lists.macosforge.org

[MacPorts] #41257: py33-astropy fails install
by MacPorts 17 Oct '14

17 Oct '14

#41257: py33-astropy fails install ------------------------------+-------------------------------- Reporter: david.w.watson@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: py33-astropy ------------------------------+-------------------------------- See log. -- Ticket URL: <https://trac.macports.org/ticket/41257> MacPorts <http://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #42069: py-libxml2 @2.9.1: add python32 and python33 subports
by MacPorts 17 Oct '14

17 Oct '14

#42069: py-libxml2 @2.9.1: add python32 and python33 subports ------------------------+-------------------------------- Reporter: zpeeters@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: haspatch | Port: py-libxml2 ------------------------+-------------------------------- Since version 2.9.1 libxml2 supports Python 3.X. I have tested python 3.2 and 3.3 (and 2.7). Python 3.1 and 3.4 may also work. All tests in ${worksrcpath}/tests return "OK". libxml2mod imports without error (i.e. I cannot reproduce ticket [https://trac.macports.org/ticket/39579 #39579]). In addition, changed url for master_sites and livecheck.url. -- Ticket URL: <https://trac.macports.org/ticket/42069> MacPorts <http://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #41508: relax3d @1.0.4: change gcc variants, use gcc48 as default compiler
by MacPorts 17 Oct '14

17 Oct '14

#41508: relax3d @1.0.4: change gcc variants, use gcc48 as default compiler -----------------------------+-------------------------------- Reporter: Peter.Danecek@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: relax3d -----------------------------+-------------------------------- I wonder if these `require_active_variants fftw-3-single gcc4.` lines are needed. The compilers should use a common libgcc (or compatible), right? So a dependency on the this should be sufficient. I would also like to propose to use the `+gcc48` as default, and maybe the use of the "Fortran Recipe" if appropriate here. {{{ relax3d @1.0.4 (science, gis) Variants: gcc45, gcc46, [+]gcc47, gcc48 }}} Last thing, the `INSTALL` states "Proj 4.7.1 or greater", so why not using `proj @4.8.0 (gis)` instead? -- Ticket URL: <https://trac.macports.org/ticket/41508> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #40368: vtk6 @6.0.0
by MacPorts 17 Oct '14

17 Oct '14

#40368: vtk6 @6.0.0 ------------------------+-------------------------------- Reporter: c.herbig@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: | Port: vtk6 ------------------------+-------------------------------- Port does not currently build, but I require it for another portfile I am working on. Simply copy/pasting the updates into vtk5 did not work for me, but I don't know anything about this port. I hope that someone who does will be able to work this out. -- Ticket URL: <https://trac.macports.org/ticket/40368> MacPorts <http://www.macports.org/> Ports system for OS X

1 8

[MacPorts] #39984: pcal @4.9.1 - fails to build
by MacPorts 17 Oct '14

17 Oct '14

#39984: pcal @4.9.1 - fails to build -------------------------------+-------------------------------- Reporter: havier25099amph@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.0 Keywords: pcal | Port: -------------------------------+-------------------------------- pcal fails to build and gives the following error {{{ 08/03/2013 04:40:32 PM user@host:~$ sudo port install pcal Password: ---> Fetching archive for pcal ---> Attempting to fetch pcal-4.9.1_0.darwin_12.x86_64.tbz2 from http://packages.macports.org/pcal ---> Attempting to fetch pcal-4.9.1_0.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/pcal ---> Attempting to fetch pcal-4.9.1_0.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/pcal ---> Fetching distfiles for pcal ---> Attempting to fetch pcal-4.9.1.tgz from http://superb- dca3.dl.sourceforge.net/pcal ---> Verifying checksums for pcal ---> Extracting pcal ---> Configuring pcal ---> Building pcal Error: org.macports.build for port pcal returned: command execution failed Please see the log file for port pcal for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_pcal/pcal/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port pcal failed }}} Full error log is attached. Thanks! -- Ticket URL: <https://trac.macports.org/ticket/39984> MacPorts <http://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #43193: perl PortGroup: add support for multiple Perl versions
by MacPorts 17 Oct '14

17 Oct '14

#43193: perl PortGroup: add support for multiple Perl versions -------------------------+-------------------------------- Reporter: mojca@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: perl5 -------------------------+-------------------------------- Perl recently switched to `+perl5_16`. Now there's a lot of ports with hardcoded dependencies on Perl 5.12. It would be nice to remove those and use variants instead (similar to what is done for python, even though the situation is a tiny bit different there). Related tickets: * #43004 * #43191 * #43191 From [http://trac.macports.org/browser/trunk/dports/textproc/intltool/Portfile intltool]: {{{ # TODO: This perlver cruft should be done in the perl5 PortGroup if {[variant_isset perl5_8]} { set perlver 5.8 } elseif {[variant_isset perl5_10]} { set perlver 5.10 } elseif {[variant_isset perl5_12]} { set perlver 5.12 } elseif {[variant_isset perl5_14]} { set perlver 5.14 } elseif {[variant_isset perl5_18]} { set perlver 5.18 } else { set perlver 5.16 default_variants +perl5_16 } variant perl5_8 conflicts perl5_10 perl5_12 perl5_14 perl5_16 perl5_18 description {use perl 5.8} {} variant perl5_10 conflicts perl5_8 perl5_12 perl5_14 perl5_16 perl5_18 description {use perl 5.10} {} variant perl5_12 conflicts perl5_8 perl5_10 perl5_14 perl5_16 perl5_18 description {use perl 5.12} {} variant perl5_14 conflicts perl5_8 perl5_10 perl5_12 perl5_16 perl5_18 description {use perl 5.14} {} variant perl5_16 conflicts perl5_8 perl5_10 perl5_12 perl5_14 perl5_18 description {use perl 5.16} {} variant perl5_18 conflicts perl5_8 perl5_10 perl5_12 perl5_14 perl5_16 description {use perl 5.18} {} }}} -- Ticket URL: <https://trac.macports.org/ticket/43193> MacPorts <http://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #34953: py25-libmemcached: update to 0.40-r1
by MacPorts 17 Oct '14

17 Oct '14

#34953: py25-libmemcached: update to 0.40-r1 -------------------------------------+-------------------------------------- Reporter: ryandesign@… | Owner: akitada@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: py25-libmemcached -------------------------------------+-------------------------------------- [http://code.google.com/p/python-libmemcached/downloads/list python- libmemcached 0.40-r1 is available] -- Ticket URL: <https://trac.macports.org/ticket/34953> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 3

[MacPorts] #42504: py-pyinterval
by MacPorts 17 Oct '14

17 Oct '14

#42504: py-pyinterval ---------------------------+-------------------------------- Reporter: macosx12345@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: ---------------------------+-------------------------------- A Python package for interval arithmetic. -- Ticket URL: <https://trac.macports.org/ticket/42504> MacPorts <http://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #39018: dpkg @1.14.29: update to 1.16.10
by MacPorts 17 Oct '14

17 Oct '14

#39018: dpkg @1.14.29: update to 1.16.10 ---------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: dpkg ---------------------+-------------------------------- {{{ gl00b05046:opencflite-476.19.0 egall$ port livecheck dpkg dpkg seems to have been updated (port version: 1.14.29, new version: 1.16.10) }}} -- Ticket URL: <https://trac.macports.org/ticket/39018> MacPorts <http://www.macports.org/> Ports system for OS X

1 27

[MacPorts] #39708: py26-tvdb: update to 1.8.2
by MacPorts 17 Oct '14

17 Oct '14

#39708: py26-tvdb: update to 1.8.2 --------------------+------------------------- Reporter: jmr@… | Owner: jameskyle@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: py26-tvdb --------------------+------------------------- https://github.com/dbr/tvdb_api/releases Also, it would be good to: * move to the unified python portgroup * use the github portgroup in order to fetch a distfile rather than using git * review whether setuptools is used at runtime and change it to depends_build if not. -- Ticket URL: <https://trac.macports.org/ticket/39708> MacPorts <http://www.macports.org/> Ports system for OS X

1 6