May 2014 - macports-tickets - lists.macosforge.org

[MacPorts] #41401: root @5.34.11 (science) no libX11 found for configuration
by MacPorts 13 May '14

13 May '14

#41401: root @5.34.11 (science) no libX11 found for configuration ------------------------------+-------------------------------- Reporter: donald_y_smith@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: configure failed | Port: root ------------------------------+-------------------------------- In fact there are two problems. 1. one is the libX11 not found, so port couldn't be compiled. I googled it and found for gnuplot had the same problem and they fixed it on Nov 2. 2. I set my gcc as llvm-gcc42. But the configuration didn't use it. It always use the one with Xcode, and the same time the port gfortran will be used. I attached the log file. You can find the lines. Thanks a lot. -- Ticket URL: <https://trac.macports.org/ticket/41401> MacPorts <http://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #42875: Failure upgrading Geant4
by MacPorts 13 May '14

13 May '14

#42875: Failure upgrading Geant4 -------------------------------+-------------------------------- Reporter: graziosi.angelo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: geant4 -------------------------------+-------------------------------- Today: {{{ $ sudo port selfupdate [...] $ sudo port outdated The following installed ports are outdated: clhep 2.1.3.1_0 < 2.1.4.1_0 geant4.9.6 4.9.6.p02_0 < 4.9.6.p02_1 sqlite3 3.8.3.1_0 < 3.8.4.1_0 $ sudo port upgrade outdated ---> Computing dependencies for clhep ---> Fetching archive for clhep ---> Attempting to fetch clhep-2.1.4.1_0.darwin_13.x86_64.tbz2 from http://nue.de.packages.macports.org/macports/packages/clhep ---> Attempting to fetch clhep-2.1.4.1_0.darwin_13.x86_64.tbz2 from http://lil.fr.packages.macports.org/clhep ---> Attempting to fetch clhep-2.1.4.1_0.darwin_13.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/clhep ---> Fetching distfiles for clhep ---> Verifying checksums for clhep ---> Extracting clhep ---> Configuring clhep ---> Building clhep ---> Staging clhep into destroot ---> Installing clhep @2.1.4.1_0 ---> Cleaning clhep ---> Deactivating clhep @2.1.3.1_0 ---> Cleaning clhep ---> Activating clhep @2.1.4.1_0 ---> Cleaning clhep ---> Computing dependencies for sqlite3 ---> Fetching archive for sqlite3 ---> Attempting to fetch sqlite3-3.8.4.1_0.darwin_13.x86_64.tbz2 from http://nue.de.packages.macports.org/macports/packages/sqlite3 ---> Attempting to fetch sqlite3-3.8.4.1_0.darwin_13.x86_64.tbz2 from http://lil.fr.packages.macports.org/sqlite3 ---> Attempting to fetch sqlite3-3.8.4.1_0.darwin_13.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/sqlite3 ---> Fetching distfiles for sqlite3 ---> Attempting to fetch sqlite-autoconf-3080401.tar.gz from http://fco.it.distfiles.macports.org/mirrors/macports-distfiles/sqlite3 ---> Verifying checksums for sqlite3 ---> Extracting sqlite3 ---> Applying patches to sqlite3 ---> Configuring sqlite3 ---> Building sqlite3 ---> Staging sqlite3 into destroot ---> Installing sqlite3 @3.8.4.1_0 ---> Cleaning sqlite3 ---> Computing dependencies for sqlite3 ---> Deactivating sqlite3 @3.8.3.1_0 ---> Cleaning sqlite3 ---> Activating sqlite3 @3.8.4.1_0 ---> Cleaning sqlite3 ---> Computing dependencies for geant4.9.6 ---> Fetching archive for geant4.9.6 ---> Attempting to fetch geant4.9.6-4.9.6.p02_1+gdml+qt.darwin_13.x86_64.tbz2 from http://nue.de.packages.macports.org/macports/packages/geant4.9.6 ---> Attempting to fetch geant4.9.6-4.9.6.p02_1+gdml+qt.darwin_13.x86_64.tbz2 from http://lil.fr.packages.macports.org/geant4.9.6 ---> Attempting to fetch geant4.9.6-4.9.6.p02_1+gdml+qt.darwin_13.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/geant4.9.6 ---> Fetching distfiles for geant4.9.6 ---> Verifying checksums for geant4.9.6 ---> Extracting geant4.9.6 ---> Applying patches to geant4.9.6 ---> Configuring geant4.9.6 ---> Building geant4.9.6 Error: org.macports.build for port geant4.9.6 returned: command execution failed Please see the log file for port geant4.9.6 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_science_geant4/geant4.9.6/main.log Error: Unable to upgrade port: 1 To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets }}} So, clhep and sqlite were upgrade successfully but geant4 failed. Here is on {{{ OS X 10.9.2 Xcode 5.1 (5B130a) Command Line Tools 5.1 $ clang -v Apple LLVM version 5.1 (clang-503.0.38) (based on LLVM 3.4svn) Target: x86_64-apple-darwin13.1.0 Thread model: posix }}} Ciao, Angelo. -- Ticket URL: <https://trac.macports.org/ticket/42875> MacPorts <http://www.macports.org/> Ports system for OS X

1 19

[MacPorts] #41572: root: unknown type name 'FT_Glyph'; did you mean 'FTGlyph'
by MacPorts 13 May '14

13 May '14

#41572: root: unknown type name 'FT_Glyph'; did you mean 'FTGlyph' ---------------------+---------------------- Reporter: mojca@… | Owner: jonesc@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: root ---------------------+---------------------- Compiling the latest Root 5.34.12 (on top of the latest FT 2.5.1 ;) the compilation on 10.7 fails with: {{{ /usr/bin/clang++ -O2 -m64 -pipe -Wshadow -W -Wall -Woverloaded-virtual -fsigned-char -fno-common -Iinclude -DR__HAVE_CONFIG -pthread -o graf2d/graf/src/TPaveLabel.o -c /path/to/work/root/graf2d/graf/src/TPaveLabel.cxx In file included from /path/to/work/root/graf2d/graf/src/TMathText.cxx:15: include/TTF.h:51:4: error: unknown type name 'FT_Glyph'; did you mean 'FTGlyph'? FT_Glyph fImage; // glyph image ^~~~~~~~ FTGlyph include/ftglyph.h:25:19: note: 'FTGlyph' declared here class FTGL_EXPORT FTGlyph ^ In file included from /path/to/work/root/graf2d/graf/src/TMathText.cxx:15: include/TTF.h:51:15: error: field type 'FTGlyph' is an abstract class FT_Glyph fImage; // glyph image ^ include/ftglyph.h:49:32: note: unimplemented pure virtual method 'Render' in 'FTGlyph' virtual const FTPoint& Render( const FTPoint& pen) = 0; ^ bin/rmkdepend -R -fgraf2d/graf/src/TPaveStats.d -Y -w 1000 -- -m64 -pipe -Wshadow -W -Wall -Woverloaded-virtual -fsigned-char -fno-common -Iinclude -DR__HAVE_CONFIG -pthread -D__cplusplus -- /path/to/work/root/graf2d/graf/src/TPaveStats.cxx /usr/bin/clang++ -O2 -m64 -pipe -Wshadow -W -Wall -Woverloaded-virtual -fsigned-char -fno-common -Iinclude -DR__HAVE_CONFIG -pthread -o graf2d/graf/src/TPaveStats.o -c /path/to/work/root/graf2d/graf/src/TPaveStats.cxx 2 errors generated. make: *** [graf2d/graf/src/TMathText.o] Error 1 make: *** Waiting for unfinished jobs.... make: Leaving directory `/path/to/work/root' }}} -- Ticket URL: <https://trac.macports.org/ticket/41572> MacPorts <http://www.macports.org/> Ports system for OS X

1 14

[MacPorts] #34171: Add cling variant to ROOT port
by MacPorts 13 May '14

13 May '14

#34171: Add cling variant to ROOT port --------------------------------------+------------------------------------- Reporter: Deil.Christoph@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: root --------------------------------------+------------------------------------- Would it be possible to optionally enable cling via a Macports variant? http://root.cern.ch/drupal/content/cling Note that I haven't found out how to configure ROOT with --enable-cling yet. I've asked for help in the ROOT forum: http://root.cern.ch/phpBB3/viewtopic.php?f=21&t=14550 Thanks! -- Ticket URL: <https://trac.macports.org/ticket/34171> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 19

[MacPorts] #37688: New Port - root-devel giving a snapshot of the ROOT6 development.
by MacPorts 13 May '14

13 May '14

#37688: New Port - root-devel giving a snapshot of the ROOT6 development. ------------------------+-------------------------------- Reporter: jonesc@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: maintainer | Port: root-devel ------------------------+-------------------------------- Hi, Attached is the port file (and two patch files) for a proposed new port root-devel. It should I guess live in the science section, along side the root port. It provides access to a snapshot of the ROOT 6 development cycle. This is a major development over ROOT 5 and most notably replaces the CINT interpreter with cling, a new one based on llvm/clang. This is a big change so it is likely we will want to maintain ROOT5 and ROOT6 versions for some time, even once ROOT6 is first released. No actual releases are made yet, so this port grabs an a particular (fixed) svn revision from the ROOT svn server. Other than the changes needed to do this the port is essentially the same as the root port, and provides most of the same variants. I have though removed the various gcc and clang variants, as it simply does not compile with these compilers. I have only got it working with clang and llvm-gcc4.2 in OSX10.8 Xcode 4.5.2. I don't have access to any other OSX versions, so have no idea if it will compile on them or not ... This port conflicts with the root port (and thus if committed the root port should be updated at the same time to conflict with this one). Allowing them to be installable side by side might be possible, but quite a bit of effort and I am not sure if it would be worth it. One thing I wasn't completely sure on was how to update the livecheck section, so please take a look at that part. cheers Chris -- Ticket URL: <https://trac.macports.org/ticket/37688> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 46

[MacPorts] #36442: root: try to use CMake
by MacPorts 13 May '14

13 May '14

#36442: root: try to use CMake ------------------------------------+-------------------------------- Reporter: mojca.miklavec.lists@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Low | Milestone: Component: ports | Version: Keywords: | Port: root ------------------------------------+-------------------------------- It might be worth looking into (newer) CMake-based root builds. -- Ticket URL: <https://trac.macports.org/ticket/36442> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 1

[MacPorts] #43683: Sudo port clean all failing
by MacPorts 13 May '14

13 May '14

#43683: Sudo port clean all failing ----------------------+-------------------------------- Reporter: a.user@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: ----------------------+-------------------------------- I'm trying to follow the migration instructions for 10.9 but when I try to use "clean" it chokes here {{{ ---> Cleaning apbs Error: apbs: Variant mpich conflicts with universal Error: Unable to open port: Error evaluating variants }}} I've tried {{{ sudo port -f uninstall apbs sudo port clean apbs ---> Cleaning apbs }}} {{{ sudo port -f uninstall mpich sudo port clean mpich ---> Cleaning mpich }}} then {{{ sudo port clean all sudo port clean uninstalled }}} also {{{ sudo port uninstall --follow-dependencies apbs sudo port clean uninstalled }}} still choking, as is {{{ sudo port uninstall --follow-dependencies mpich sudo port clean uninstalled }}} -- Ticket URL: <https://trac.macports.org/ticket/43683> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #43696: do it so can you I fabricated this
by MacPorts 13 May '14

13 May '14

#43696: do it so can you I fabricated this ----------------------------+-------------------------------- Reporter: pooytooy1122@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: xtreme nitro | Port: ----------------------------+-------------------------------- For a admirer in actuality simple shot him this media and you can admonition him with this advice the cops late an hour if I kiss complete yeah thanks for watching I’m help the 50 columnist Like button up and I’ll see tomorrow for Tuesday set aside time to get Skype herself all right to sell years girlfriend Jason close this page if you already acquire the big adorable able-bodied anatomy that women desire it meant admire if you don't acquire it yet [http://xtremenitrosure.com/ xtreme nitro] keep alert hi this is Ray and I’m here to acquaint you about a new muscle in weight accretion arrangement that is literally changing angular people's anatomy types permanently into absurd beef and weight accepting machines give me just 5 annual of your time in I will appearance you how you too think it's baby Roy like after-effects by safely Guinea anywhere from 10 to 30 pounds of muscle in the next few weeks committing only four hours a anniversary in the best allotment is if Icon do it so can you I fabricated this presentation form skinny also accepted as harder gainer audience and anew accompany so since I'm about to allotment what are my closely-guarded watt in Beef Building Secrets I will abandoned acquire it online for short time so accomplish abiding you watch it while you can you adeptness wish to yield. http://xtremenitrosure.com/ -- Ticket URL: <https://trac.macports.org/ticket/43696> MacPorts <http://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #43695: this is as my fastest affairs hot selling
by MacPorts 13 May '14

13 May '14

#43695: this is as my fastest affairs hot selling ----------------------------+-------------------------------- Reporter: pooytooy1122@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: xtreme nitro | Port: ----------------------------+-------------------------------- Top in fiber and its sub it's a complete acceptable antecedent for control your claret sugars able-bodied actually control your claret amoroso better that accomplished atom aliment so that that's ago through abiding for me for breakfast it's either for my crab antecedent it's either all meal or ZQ Brad and you can't go amiss with that of course you see the add the auto [http://xtremenitrosure.com/ xtreme nitro] baptize actuality we went over the allowances aloft auto baptize in another NON-BS Elite Test 360 that's something that's a abiding my breakfast and yeah that's basically at I mean we got the supplements traveling as well but that's a that's for addition time and re: assumption what it in actuality comes down to is accolade the exact nutritional requirement for you and your commons but these are some go two apparatus that I would accede blaze you okay acknowledgment a lot will allocution to soap here reside action Jimmy Smith aftereffect you set about charge less during column workout nutrition because if you guys don't apperceive all the other day every atomic added plan %uh patrician Bible this is as my fastest affairs hot selling product added time it's on auction for today only the endure day for just twelve dollars you bang the hotlink aloft in the NON-BS Elite Test 360 or click hotlink below excuse you're in actuality quick sip about it adulation aggregate out everything is accustomed pre during and post workout diet for humans who magical well you're. http://xtremenitrosure.com/ -- Ticket URL: <https://trac.macports.org/ticket/43695> MacPorts <http://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #43689: Cannot install gtk2
by MacPorts 13 May '14

13 May '14

#43689: Cannot install gtk2 -----------------------------+----------------------------------- Reporter: switzer.aaron@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Keywords: | Port: xorg-libpthread-stubs -----------------------------+----------------------------------- I am fairly new at this so I apologize if this is a trivial problem. running OS X 10.9.2 (Mountain Lion) installed Xcode Version 5.1.1 installed MacPorts-2.2.1-10.9-Mavericks.pkg I am trying to install gtk2 and I am receiving this error: bash-3.2# port install gtk2 ---> Computing dependencies for gtk2 ---> Dependencies to be installed: atk gobject-introspection cairo xorg- libXext xorg-libX11 xorg-libxcb xorg-libpthread-stubs xorg-xcb-proto libxml2 xz xorg-xextproto xorg-xcb-util xrender xorg-renderproto libtool gdk-pixbuf2 jasper jpeg tiff hicolor-icon-theme pango Xft2 harfbuzz graphite2 shared-mime-info xorg-libXcomposite xorg-compositeproto xorg- libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-inputproto xorg-libXinerama xorg-xineramaproto xorg- libXrandr xorg-randrproto ---> Fetching archive for xorg-libpthread-stubs ---> Attempting to fetch xorg-libpthread- stubs-0.3_0.darwin_13.noarch.tbz2 from http://nue.de.packages.macports.org/macports/packages/xorg-libpthread- stubs ---> Attempting to fetch xorg-libpthread- stubs-0.3_0.darwin_13.noarch.tbz2.rmd160 from http://nue.de.packages.macports.org/macports/packages/xorg-libpthread- stubs Error: org.macports.archivefetch for port xorg-libpthread-stubs returned: Failed to fetch signature for archive: The requested URL returned error: 400 Bad Request Error: Failed to install xorg-libpthread-stubs Please see the log file for port xorg-libpthread-stubs for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_x11_xorg-libpthread-stubs/xorg-libpthread- stubs/main.log Error: The following dependencies were not installed: atk gobject- introspection cairo xorg-libXext xorg-libX11 xorg-libxcb xorg-libpthread- stubs xorg-xcb-proto libxml2 xz xorg-xextproto xorg-xcb-util xrender xorg- renderproto libtool gdk-pixbuf2 jasper jpeg tiff hicolor-icon-theme pango Xft2 harfbuzz graphite2 shared-mime-info xorg-libXcomposite xorg- compositeproto xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg- libXdamage xorg-damageproto xorg-libXi xorg-inputproto xorg-libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port gtk2 failed Attached is the main log. Thank you for all your help. -- Ticket URL: <https://trac.macports.org/ticket/43689> MacPorts <http://www.macports.org/> Ports system for OS X

1 3