June 2014 - macports-tickets - lists.macosforge.org

[MacPorts] #39040: gnupod Portfile patch
by MacPorts 13 Jun '14

13 Jun '14

#39040: gnupod Portfile patch ---------------------+-------------------------------- Reporter: david@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: gnupod ---------------------+-------------------------------- Current portfile is broken, as it still uses the non-pure-perl version of vorbis perl. There are also many perl5.12 dependencies, rather than p5 (virtual) dependencies. The attached Portfile addresses the following: 1) gnupod will no build 2) changed all perl5.12 references to p5, to use whatever version of perl is selected One outstanding bug still exists. Using depends_lib-append port:p5-ogg-vorbis-header-pureperl somehow fires a p5.12 dependency. The brute force fix I uses was port:p5.16-ogg-vorbis-header-pureperl and is better fixed "the right way". So if the maintainer knows "the right way", please supply another patch to p5-ogg-vorbis-header-pureperl to fix this. Thanks. -- Ticket URL: <https://trac.macports.org/ticket/39040> MacPorts <http://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #38483: frozenbubble2: build for the right architectures
by MacPorts 13 Jun '14

13 Jun '14

#38483: frozenbubble2: build for the right architectures --------------------------+--------------------------- Reporter: ryandesign@… | Owner: pmq@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: frozenbubble2 --------------------------+--------------------------- frozenbubble2 does not build for the architecture requested in macports.conf. Here is an example of what happens if you try to install frozenbubble2 for i386 on an x86_64 Mac. -- Ticket URL: <https://trac.macports.org/ticket/38483> MacPorts <http://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #38346: gnupod: noarch
by MacPorts 13 Jun '14

13 Jun '14

#38346: gnupod: noarch --------------------------+-------------------- Reporter: ryandesign@… | Owner: pmq@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: gnupod --------------------------+-------------------- gnupod doesn't install any architecture-specific files that I can see. So it needs: {{{ supported_archs noarch }}} -- Ticket URL: <https://trac.macports.org/ticket/38346> MacPorts <http://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #38345: gnupod: fix variants
by MacPorts 13 Jun '14

13 Jun '14

#38345: gnupod: fix variants --------------------------+-------------------- Reporter: ryandesign@… | Owner: pmq@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: gnupod --------------------------+-------------------- The gnupod port has variants that only add dependencies: {{{ # should also use timidity variant flac description "Enable FLAC" { depends_lib-append port:flac port:p5.12-audio-flac-header } # should use Ogg::Vorbis::Header::PurePerl, won't work variant vorbis description "Enable Ogg/Vorbis" { depends_lib-append port:vorbis-tools port:p5.12-libvorbis-perl } variant aac description "Enable AAC" { depends_lib-append port:faac path:lib/libavcodec.dylib:ffmpeg } variant artwork description "Enable artwork support" { depends_lib-append port:ImageMagick } }}} The port needs to be updated to ensure that those dependencies will ''not'' be used if those variants are ''not'' selected, even if those ports are already installed. -- Ticket URL: <https://trac.macports.org/ticket/38345> MacPorts <http://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #38086: fragrouter@1.6 not installing
by MacPorts 13 Jun '14

13 Jun '14

#38086: fragrouter(a)1.6 not installing -------------------------------+-------------------------------- Reporter: turbominicooper@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: fragrouter -------------------------------+-------------------------------- cooper$ sudo port install fragrouter Password: ---> Computing dependencies for fragrouter ---> Building fragrouter Error: org.macports.build for port fragrouter returned: command execution failed Please see the log file for port fragrouter for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_fragrouter/fragrouter/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port fragrouter failed -- Ticket URL: <https://trac.macports.org/ticket/38086> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #38002: kedpm @0.4.1-cvs_1 segfaults on startup
by MacPorts 13 Jun '14

13 Jun '14

#38002: kedpm @0.4.1-cvs_1 segfaults on startup -------------------------+-------------------------------- Reporter: sewebster@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Keywords: | Port: kedpm -------------------------+-------------------------------- When I run kedpm, it segfaults. This is for the default gtk frontend. Starting it in CLI mode also fails, because it can't find readline, but I think that is unrelated, possibly a separate bug. I'm attaching the console output as well as the text from the Apple crash report. -- Ticket URL: <https://trac.macports.org/ticket/38002> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 4

[MacPorts] #37541: iperf @2.0.5 - configure failure: command execution failed
by MacPorts 13 Jun '14

13 Jun '14

#37541: iperf @2.0.5 - configure failure: command execution failed -------------------------+-------------------------------- Reporter: jimnieken@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: iperf | Port: iperf -------------------------+-------------------------------- iperf fails to build? I guess? Output from ports and from the log file bash-3.2$ sudo port install iperf ---> Configuring iperf Error: org.macports.configure for port iperf returned: configure failure: command execution failed Please see the log file for port iperf for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_iperf/iperf/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port iperf failed bash-3.2$ bash-3.2$ tail /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_iperf/iperf/main.log :info:configure Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_iperf/iperf/work/iperf-2.0.5" && ./configure --prefix=/opt/local :info:configure Exit code: 1 :error:configure org.macports.configure for port iperf returned: configure failure: command execution failed :debug:configure Error code: NONE :debug:configure Backtrace: configure failure: command execution failed while executing "$procedure $targetname" :info:configure Warning: targets not executed for iperf: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Please see the log file for port iperf for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_iperf/iperf/main.log -- Ticket URL: <https://trac.macports.org/ticket/37541> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5

[MacPorts] #36984: fetchmail - BUG in libdispatch client - ML 10.8.2
by MacPorts 13 Jun '14

13 Jun '14

#36984: fetchmail - BUG in libdispatch client - ML 10.8.2 -----------------------+-------------------------------- Reporter: srothe@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: fetchmail | Port: fetchmail -----------------------+-------------------------------- I installed fetchmail using mac ports. But everytime I start fetchmail (SSL included), I receive the following message in /var/log/mail.log [...] BUG in libdispatch client: Do not close random Unix descriptors [...] I have compiled the latest fetchmail version by myself, but I receive the same message. Fetchmail itself works, but what does it means? Thanks Soeren -- Ticket URL: <https://trac.macports.org/ticket/36984> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 12

[MacPorts] #36615: libssh2 update to 1.4.2
by MacPorts 13 Jun '14

13 Jun '14

#36615: libssh2 update to 1.4.2 -----------------------+-------------------------------- Reporter: macuser@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: libssh2 -----------------------+-------------------------------- Updated libssh2 from 1.2.7 to 1.4.2 URL : http://www.libssh2.org/download/libssh2-1.4.2.tar.gz -- Ticket URL: <https://trac.macports.org/ticket/36615> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 2

[MacPorts] #33078: p5.14-io-kqueue
by MacPorts 13 Jun '14

13 Jun '14

#33078: p5.14-io-kqueue --------------------------------+------------------------------------------- Reporter: raramayo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: p5.14-io-kqueue --------------------------------+------------------------------------------- {{{ :debug:main Skipping completed org.macports.patch (p5.14-io-kqueue) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (p5.14-io-kqueue) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Mon Jan 30 13:03:30 CST 2012 :notice:build ---> Building p5.14-io-kqueue :debug:build Executing org.macports.build (p5.14-io-kqueue) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5 -io-kqueue/p5.14-io-kqueue/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5 -io-kqueue/p5.14-io-kqueue/work/IO-KQueue-0.32" && /usr/bin/make -j2 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5 -io-kqueue/p5.14-io-kqueue/work/IO-KQueue-0.32" && /usr/bin/make -j2 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5 -io-kqueue/p5.14-io-kqueue/work/IO-KQueue-0.32' :info:build make: *** No rule to make target `/opt/local/lib/perl5/5.14.1 /darwin-thread-multi-2level/CORE/cc_runtime.h', needed by `KQueue.o'. Stop. :info:build make: *** Waiting for unfinished jobs.... :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5 -io-kqueue/p5.14-io-kqueue/work/IO-KQueue-0.32' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5 -io-kqueue/p5.14-io-kqueue/work/IO-KQueue-0.32" && /usr/bin/make -j2 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for p5.14-io- kqueue): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for p5.14-io-kqueue is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5 -io-kqueue/p5.14-io-kqueue/main.log }}} -- Ticket URL: <https://trac.macports.org/ticket/33078> MacPorts <http://www.macports.org/> Ports system for Mac OS

1 5