October 2015 - macports-tickets - lists.macosforge.org

[MacPorts] #49098: xz fails to build on Lion
by MacPorts 04 Oct '15

04 Oct '15

#49098: xz fails to build on Lion ---------------------+-------------------------------- Reporter: amtor@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: xz ---------------------+-------------------------------- Upgrading cctools from 5.2.1 to 5.2.2 on Lion fails to build. I have cleaned the xz port and tried to upgrade again to version 5.2.2. Still fails to build. See attached log. -- Ticket URL: <https://trac.macports.org/ticket/49098> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

Re: [MacPorts] #45291: defect: valgrind 3.10 does not built on Snow Leopard/Mac OS X 10.5.8 because libcoregrind_amd64_darwin_a-syswrap-darwin.o has no symbols
by MacPorts 04 Oct '15

04 Oct '15

#45291: defect: valgrind 3.10 does not built on Snow Leopard/Mac OS X 10.5.8 because libcoregrind_amd64_darwin_a-syswrap-darwin.o has no symbols ------------------------------+---------------------- Reporter: Peter_Dyballa@… | Owner: raimue@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.1 Resolution: | Keywords: Port: valgrind | ------------------------------+---------------------- Comment (by macosx12345@…): For me too. -- Ticket URL: <https://trac.macports.org/ticket/45291#comment:11> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

Re: [MacPorts] #44193: qt: allow side by side installation of qt4-mac and qt5-mac
by MacPorts 04 Oct '15

04 Oct '15

#44193: qt: allow side by side installation of qt4-mac and qt5-mac -------------------------------+------------------------ Reporter: mojca@… | Owner: mcalhoun@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: Resolution: | Keywords: Port: qt4-mac, qt5-mac | -------------------------------+------------------------ Comment (by michaelld@…): Let me be brief: I don't have time to keep up with the ongoing banter here. I'm sure there's lots of great discussion in them, but the best I can do is scan them. I -strongly- encourage replies to be reasonably brief and concise. A reasonable paragraph like mine below is about what I can digest (~250 words). qt4-mac is openmaintainer, so if someone else wants to mess with it please go ahead! If you do, please make BIG changes not very often; as Mojca says: it takes forever to build Qt4 on some systems. Yes, sometimes it takes a small, stupid thing like total breakage in a new OS to get my attention; I'm a very busy person! I'm going to commit -something- tomorrow/Monday that will install qt4 to allow a parallel build. What I commit will be just the minimum necessary, whatever that is. If we decide to rename "qt4-mac" to just "qt4", that's fine with me & can be done at the same time. If not, that's also fine. I fully agree (and have stated) that René has worked hard & some of his changes will get put in place, some day; maybe by me, maybe by someone else. Maybe we can get a GSoC'16 student to do it & the other accumulating Qt tickets. I think the scenario this coming week will be as Mojca describes: there are just too many ports to check, so let's do the change and then clean up as necessary afterward. My commit will rev-bump around 25 ports that I know work with any Qt4 install location. There are another about 50 ports that either fail (~4 of them) or I haven't been able to test (~46 of them). Let's hope many of the latter of these use the qt4 portgroup & "just work". Either way, the time has come and this is the way it's going to happen (otherwise it won't happen & I think we wall don't want that). -- Ticket URL: <https://trac.macports.org/ticket/44193#comment:66> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

Re: [MacPorts] #39450: libcaca @0.99.beta18: Make building caca-sharp into a variant
by MacPorts 04 Oct '15

04 Oct '15

#39450: libcaca @0.99.beta18: Make building caca-sharp into a variant ----------------------+-------------------------------- Reporter: egall@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: fixed | Keywords: Port: libcaca | ----------------------+-------------------------------- Changes (by mcalhoun@…): * status: new => closed * resolution: => fixed Comment: There is still no C# bindings, but at least the error should be fixed in r140827. -- Ticket URL: <https://trac.macports.org/ticket/39450#comment:3> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #46646: update ed to 1.10
by MacPorts 04 Oct '15

04 Oct '15

#46646: update ed to 1.10 ----------------------------------+-------------------------------- Reporter: michael.bryniarski@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: ed ----------------------------------+-------------------------------- ed has been updated 1.10: http://www.gnu.org/software/ed/ -- Ticket URL: <https://trac.macports.org/ticket/46646> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #48585: Zim 0.63 not working
by MacPorts 04 Oct '15

04 Oct '15

#48585: Zim 0.63 not working -------------------------+---------------------------------- Reporter: vitornasc@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: zim @0.63_0+python27 -------------------------+---------------------------------- After recent update to version 0.63, zim stopped working. Running the app at Applications/MacPorts/Zim, I get a window "Python exited unexpectedly", with the contents below (and I later need to force-stop the app). Running from the terminal, the call freezes after a few warnings (** (process:1210): WARNING **: Trying to regitser gtype 'GDriveStarFlags'as enum when in fact it is of type 'GFlags'). After pressing CTRL-C the zim window appears. -- Ticket URL: <https://trac.macports.org/ticket/48585> MacPorts <https://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #49089: gcc5.2 build fails with segmentation fault
by MacPorts 04 Oct '15

04 Oct '15

#49089: gcc5.2 build fails with segmentation fault ----------------------------+-------------------------------- Reporter: betrussell23@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: gcc5.2 | Port: py34-nltk ----------------------------+-------------------------------- Guys, Gcc5.2 build fails with a segmentation fault. I've 2GB RAM and Core 2 duo processor. Find attached the error log. Comprehensive log is as follows, {{{ macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/gcc-5.2.0/gcc/build -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/gcc-5.2.0/gcc/../include -I/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/gcc-5.2.0/gcc/../libcpp/include \ -o build/genopinit.o /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/gcc-5.2.0/gcc/genopinit.c collect2: fatal error: ld terminated with signal 11 [Segmentation fault] compilation terminated. make[3]: *** [build/gencheck] Error 1 make[3]: *** Waiting for unfinished jobs.... rm gfortran.pod gcc.pod make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/build/gcc' make[2]: *** [all-stage2-gcc] Error 2 make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/build' make[1]: *** [stage2-bubble] Error 2 make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/build' make: *** [bootstrap] Error 2 make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/build' Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/work/build" && /usr/bin/make -j2 -w bootstrap Exit code: 2 Error: org.macports.build for port gcc5 returned: command execution failed Warning: targets not executed for gcc5: org.macports.activate org.macports.build org.macports.destroot org.macports.install Error: Failed to install gcc5 Please see the log file for port gcc5 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_lang_gcc5/gcc5/main.log Error: The following dependencies were not installed: py34-matplotlib py34-numpy gcc5 py34-cython cython_select py34-nose nosetests_select py34-setuptools py34-parsing py34-pyobjc-cocoa py34-pyobjc py34-py2app py34-macholib py34-modulegraph py34-altgraph py34-tornado py34-certifi qhull py34-yaml libyaml To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port py34-nltk failed }}} -- Ticket URL: <https://trac.macports.org/ticket/49089> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #49080: Update pymol to 1.7.7.2 at r4136 and add gcc5 variant
by MacPorts 04 Oct '15

04 Oct '15

#49080: Update pymol to 1.7.7.2 at r4136 and add gcc5 variant -----------------------------------+-------------------------------- Reporter: howarth.at.macports@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: pymol -----------------------------------+-------------------------------- The attached Portfile diff updates the pymol package to the latest 1.7.7.2 release at svn r4136. Support for a gcc5 compiler variant is also added to the Portfile. -- Ticket URL: <https://trac.macports.org/ticket/49080> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

Re: [MacPorts] #37062: pymol @1.5 tcl must be installed without +corefoundation
by MacPorts 04 Oct '15

04 Oct '15

#37062: pymol @1.5 tcl must be installed without +corefoundation -----------------------------+----------------------------------- Reporter: ryan.sheldon@… | Owner: howarth.at.macports@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: pymol | -----------------------------+----------------------------------- Changes (by ryandesign@…): * status: reopened => new * cc: ryandesign@… (added) * owner: macports-tickets@… => howarth.at.macports@… Comment: Replying to [comment:5 howarth@…]: > So you are saying you broke pymol again? It is beyond me why you fellows don't just do the sensible thing > and fold the use of corefoundation into the pthreads variant (which I recommended long ago). Using corefoundation > drags in threading so you might as well couple the two together. I'm not sure to whom this comment was directed, and I'm not sure what you meant by it. The pymol portfile states that it requires that the tcl port be installed without the corefoundation variant: {{{ require_active_variants tcl "" corefoundation require_active_variants tk "" quartz }}} (To explain, for any readers unfamiliar with `require_active_variants`: this states that for the dependency tcl there are no required variants and there is 1 forbidden variant (corefoundation). Similarly, it states that for the dependency tk there are no required variants and there is 1 forbidden variant (quartz).) How would combining the corefoundation and threads variants in the tcl port have anything to do with whether or not pymol works with corefoundation support? -- Ticket URL: <https://trac.macports.org/ticket/37062#comment:13> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #48684: Boost won't install on 10.5.8 Leopard
by MacPorts 04 Oct '15

04 Oct '15

#48684: Boost won't install on 10.5.8 Leopard ----------------------+-------------------------------- Reporter: schalk@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: Boost ----------------------+-------------------------------- In trying to upg source-lighlight, boost won't install on leopard. Error file attached... -- Ticket URL: <https://trac.macports.org/ticket/48684> MacPorts <https://www.macports.org/> Ports system for OS X

1 14