October 2015 - macports-tickets - lists.macosforge.org

Re: [MacPorts] #45385: nfft @ 3.2.3 new port submission
by MacPorts 18 Oct '15

18 Oct '15

#45385: nfft @ 3.2.3 new port submission -------------------------+-------------------------------- Reporter: tesch1@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.1 Resolution: | Keywords: Port: nfft | -------------------------+-------------------------------- Comment (by dstrubbe@…): This appears to be the same software as #46718. Can you two discuss and find a consensus for a Portfile, on this page? -- Ticket URL: <https://trac.macports.org/ticket/45385#comment:2> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #46943: py27-gobject3 fails to build on MacOS 10.5.8 PPC; can fix problem with -fPIC
by MacPorts 18 Oct '15

18 Oct '15

#46943: py27-gobject3 fails to build on MacOS 10.5.8 PPC; can fix problem with -fPIC -------------------------+-------------------------------- Reporter: paulccobb@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: -------------------------+-------------------------------- I found a few days ago that in trying to upgrade py27-gobject3 from 3.12.1_0 to 3.14.0_0, the build failed with the following error in main.log: ld: absolute addressing (perhaps -mdynamic-no-pic) used in _pygobject_constructv from .libs/_gi_la-gobjectmodule.o not allowed in slidable image. Use '-read_only_relocs suppress' to enable text relocs collect2: ld returned 1 exit status I can't claim to be an expert on MacPorts or on PowerPC build issues, but I've tried to understand what's going wrong, and offer the following info in case it helps. I found by experiment in the work/pygobject-3.14.0 directory (under macports/build) that if I insert the switch '-fPIC' in the CFLAGS for each Makefile, that makes the problem go away. As far as I understand the issue, PowerPC compilation has historically assumed -mdynamic_no_pic as the default; so if the rest of the build process wants pic, it has to be enabled explicitly. In case they're useful, I've attached two files that each capture the output of a 'make' run, invoked in the work/pygobject-3.14.0 directory without args: the first one ends with the build error, while the second has the -fPIC switch present in all Makefiles and appears to run to completion. -- Ticket URL: <https://trac.macports.org/ticket/46943> MacPorts <https://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #49220: avidemux - Qt4 not found
by MacPorts 17 Oct '15

17 Oct '15

#49220: avidemux - Qt4 not found -------------------------------+-------------------------------- Reporter: rubendibattista@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: avidemux -------------------------------+-------------------------------- I think that with the updated location of QT4 avidemux can't find it. Attached a log. -- Ticket URL: <https://trac.macports.org/ticket/49220> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #49331: gtk2 silent build breakage with gdk-pixbuf2@2.32.1_0+bundle
by MacPorts 17 Oct '15

17 Oct '15

#49331: gtk2 silent build breakage with gdk-pixbuf2(a)2.32.1_0+bundle --------------------+-------------------------------- Reporter: help@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: gdk-pixbuf2 gtk2 --------------------+-------------------------------- gtk2 build process calls just compiled and not yet installed gtk-update- icon-cache which doesn't work when gdk-pixbuf2 is compiled with bundle variant enabled (see #46685). Build carries on, but resulting library is missing stock icons, which can be confirmed with gtk-demo application (Stock Item and Icon Browser example). 2 solutions are possible: 1). set GDK_PIXBUF_MODULE_FILE environment variable to correct loaders.cache file path; 2). or remove bundle variant from gdk-pixbuf2. First solution is basically a workaround and not a fix IMHO. I like second solution better, because I don't think bundle variant in gdk-pixbuf2 is useful - it has nothing to do with application bundling, where you will have to set GDK_PIXBUF_MODULE_FILE anyway (../lib will be incorrect, because binary is in MacOS directory, not Resources/bin), so the only scenario where it's useful is smth like "mv /opt/local /usr/local" which will break other gtk stuff anyway. -- Ticket URL: <https://trac.macports.org/ticket/49331> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

Re: [MacPorts] #42506: sparsehash: configuration error
by MacPorts 17 Oct '15

17 Oct '15

#42506: sparsehash: configuration error -------------------------+------------------- Reporter: jwhowse4@… | Owner: hum@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Resolution: | Keywords: Port: sparsehash | -------------------------+------------------- Comment (by jwhowse4@…): Replying to [comment:7 ryandesign@…]: > Is this still a problem with sparsehash 2.0.3? This still seems to be a problem in the sense that in the file sparseconfig.h the variable HASH_FUN_H has the value <tr1/functional> and the variable HASH_NAMESPACE has the value std::tr1. I have attached the build log for sparsehash 2.0.3 on my system. If I am reading it correctly the package builds with clang. -- Ticket URL: <https://trac.macports.org/ticket/42506#comment:8> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

Re: [MacPorts] #42506: sparsehash: configuration error
by MacPorts 17 Oct '15

17 Oct '15

#42506: sparsehash: configuration error -------------------------+------------------- Reporter: jwhowse4@… | Owner: hum@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.2.1 Resolution: | Keywords: Port: sparsehash | -------------------------+------------------- Comment (by ryandesign@…): Is this still a problem with sparsehash 2.0.3? -- Ticket URL: <https://trac.macports.org/ticket/42506#comment:7> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #48556: sparsehash: build error on 10.11 El Capitan
by MacPorts 17 Oct '15

17 Oct '15

#48556: sparsehash: build error on 10.11 El Capitan ------------------------+-------------------------------- Reporter: macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: sparsehash ------------------------+-------------------------------- Building sparsehash fails under OS X 10.11 Beta (15A243d), Xcode Version 7.0 beta 5 (7A176x) — current latest public beta of each build log attached Possibly related/useful Homebrew issue: https://github.com/Homebrew/homebrew/issues/41087 Not sure if sparsehash is still under development? Homebrew issue says to report upstream, but I can't find an active project for it, and Homebrew has since marked the issue closed -- Ticket URL: <https://trac.macports.org/ticket/48556> MacPorts <https://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #49100: sudo port install gqrx @ the gqrx build
by MacPorts 17 Oct '15

17 Oct '15

#49100: sudo port install gqrx @ the gqrx build ------------------------------+-------------------------------- Reporter: primalbuddhist@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: gqrx libgcc | Port: install gqrx ------------------------------+-------------------------------- installed xcode , macports , then gqrx... gqrx failed at the build libgcc prompt... tried all the recommendations on Macports nothing works ... and i can't understand computer log lingo... please help... I would like to use my rtl sdr and need the GQRX install -- Ticket URL: <https://trac.macports.org/ticket/49100> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #48999: ghostscript @9.16 autoreconf failed
by MacPorts 17 Oct '15

17 Oct '15

#48999: ghostscript @9.16 autoreconf failed -------------------------------+-------------------------------- Reporter: stephane.jublin@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: ghostscript -------------------------------+-------------------------------- {{{ DEBUG: Executing org.macports.configure (ghostscript) DEBUG: Environment: CC_PRINT_OPTIONS='YES' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_ghostscript/ghostscript/work/.CC_PRINT_OPTIONS' CPATH='/opt/local/include' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.10' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_ghostscript/ghostscript/work/ghostscript-9.16" && autoreconf -fv' DEBUG: Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_ghostscript/ghostscript/work/ghostscript-9.16" && autoreconf -fv autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: /opt/local/bin/aclocal --force autom4te: need GNU m4 1.4 or later: /usr/bin/m4 aclocal: error: echo failed with exit status: 1 autoreconf: /opt/local/bin/aclocal failed with exit status: 1 Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_ghostscript/ghostscript/work/ghostscript-9.16" && autoreconf -fv Exit code: 1 Error: org.macports.configure for port ghostscript returned: autoreconf failure: command execution failed DEBUG: Error code: NONE DEBUG: Backtrace: autoreconf failure: command execution failed while executing "portconfigure::configure_main org.macports.configure" ("eval" body line 1) invoked from within "eval $procedure $targetname" Warning: targets not executed for ghostscript: org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Please see the log file for port ghostscript for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_ghostscript/ghostscript/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port ghostscript failed }}} trying to install port munin, failed when install dependency ghostscript. I try this command manualy cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_print_ghostscript/ghostscript/work/ghostscript-9.16" && autoreconf -fv , it's ok I try to reinstall ghostscript: port clean --all ghostscript port -d install ghostscript, same issue -- Ticket URL: <https://trac.macports.org/ticket/48999> MacPorts <https://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #48998: Trouble making selfupdate
by MacPorts 17 Oct '15

17 Oct '15

#48998: Trouble making selfupdate --------------------+-------------------------------- Reporter: it@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: --------------------+-------------------------------- Hi I have installed and agreed to xcode-select --install, but I still get this error, I've tried a lot of different suggestions from the WWW, but nothing works so far. http://guide.macports.org/#project.tickets local$ sudo port -v selfupdate ---> Updating MacPorts base sources using rsync rsync: failed to connect to rsync.macports.org: Connection refused (61) rsync error: error in socket IO (code 10) at /SourceCache/rsync/rsync-42/rsync/clientserver.c(105) [receiver=2.6.9] Command failed: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/base.tar /opt/local/var/macports/sources/rsync.macports.org/release/tarballs Exit code: 10 Error: Error synchronizing MacPorts sources: command execution failed To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: /opt/local/bin/port: port selfupdate failed: Error synchronizing MacPorts sources: command execution failed -- Ticket URL: <https://trac.macports.org/ticket/48998> MacPorts <https://www.macports.org/> Ports system for OS X

1 3