May 2015 - macports-tickets - lists.macosforge.org

[MacPorts] #45675: Crypt lib fails to build on 10.10 with XCode 6.1
by MacPorts 11 Oct '16

11 Oct '16

#45675: Crypt lib fails to build on 10.10 with XCode 6.1 ---------------------+-------------------------------- Reporter: dhein@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.2 Keywords: | Port: ---------------------+-------------------------------- Getting errors like this: :info:build bn/bn_asm.c:734:2: error: integer constant is larger than the largest unsigned integer type :info:build sqr_add_c2(a,1,0,c2,c3,c1); :info:build ^ And lots of warnings like this: info:build bn/bn_asm.cbn/bn_asm.c::8888::33:: warning: warning: shift count >= width of type [-Wshift-count-overflow] :info:build mul_add(rp[0],ap[0],w,c1); :info:build ^~~~~~~~~~~~~~~~~~~~~~~~~ :info:build ./bn/bn_lcl.hshift count >= width of type [-Wshift-count- overflow] :info:build mul_add(rp[0],ap[0],w,c1); :info:build ^~~~~~~~~~~~~~~~~~~~~~~~~ :info:build ./bn/bn_lcl.h:315:7: note: expanded from macro 'mul_add' :info:build (c)= Hw(t); \ :info:build ^~~~~ :info:build ./bn/bn_lcl.h:296:34: note: expanded from macro 'Hw' :info:build #define Hw(t) (((BN_ULONG)((t)>>BN_BITS2))&BN_MASK2) :info:build ^ ~~~~~~~~ Full log is attached. -- Ticket URL: <https://trac.macports.org/ticket/45675> MacPorts <https://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #47374: unison freezes entire machine
by MacPorts 10 Oct '16

10 Oct '16

#47374: unison freezes entire machine ----------------------+-------------------------------- Reporter: geezel@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: freeze | Port: unison ----------------------+-------------------------------- Running unison on a single folder with only a few (about 50) large files freezes the entire machine. Unison itself does not crash or display an error message, but it consumes more and more memory until the machine reboots. Other processes also become unresponsive, i.e. once the unison command is launched there is no way to recover. For reasons discussed in this ticket https://trac.macports.org/ticket/45621 this has been tested with various versions (unison 2.40.102 compiled against ocaml 4.01 and 4.02, and unison 2.48.3 against ocaml 4.01). They all exhibit the same behaviour. Unison on FreeBSD runs fine on the same set of files (all versions). Also, a temporary workaround on Mac OS X is to run unison with the option "copythreshold = 1024", which makes unison use rsync to transfer large files. This might well be an upstream bug. If anybody is able to confirm this behaviour I'd be willing to report it upstream. -- Ticket URL: <https://trac.macports.org/ticket/47374> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #47533: unison @2.48.3 Does not build on Tiger
by MacPorts 10 Oct '16

10 Oct '16

#47533: unison @2.48.3 Does not build on Tiger -----------------------------+-------------------------------- Reporter: csanchezdll@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: tiger, haspatch | Port: unison -----------------------------+-------------------------------- Build fails because Makefile.OCaml specifies 10.5 as minimum OS X version [macos-version-min compiler parameter is documented as minimum version the build binary is supposed to be run on]. Attached patches lower this (only on Tiger). -- Ticket URL: <https://trac.macports.org/ticket/47533> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #46224: qt4-mac 4.8.6 build failure on Leopard/PowerPC
by MacPorts 08 Oct '16

08 Oct '16

#46224: qt4-mac 4.8.6 build failure on Leopard/PowerPC ------------------------+-------------------------------- Reporter: dgonyier@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: qt4-mac ------------------------+-------------------------------- Build logs attached. -- Ticket URL: <https://trac.macports.org/ticket/46224> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #46940: Error: org.macports.build for port libgcc returned: command execution failed
by MacPorts 08 Oct '16

08 Oct '16

#46940: Error: org.macports.build for port libgcc returned: command execution failed -------------------------+-------------------------------- Reporter: bri.cales@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: libgcc, gcc | Port: -------------------------+-------------------------------- Hello, I am trying to update my macports by using the commands: sudo port -v selfupdate sudo port upgrade outdated The self update works without errors but when I execute the second command I get this error: Error: org.macports.build for port libgcc returned: command execution failed Please see the log file for port libgcc for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/libgcc/main.log Error: Problem while installing libgcc Suggestions? -- Ticket URL: <https://trac.macports.org/ticket/46940> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #47043: Error while Building libgcc
by MacPorts 08 Oct '16

08 Oct '16

#47043: Error while Building libgcc -------------------------+-------------------------------- Reporter: paula.srs@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: -------------------------+-------------------------------- Error: Processing of port libgcc failed The main.log file is in attachment which includes this message: :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/libgcc/work/build" && /usr/bin/make -j4 -w bootstrap What can be the problem? Thank you, Paula -- Ticket URL: <https://trac.macports.org/ticket/47043> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #45690: eblook failed to build on Yosemite
by MacPorts 07 Oct '16

07 Oct '16

#45690: eblook failed to build on Yosemite ------------------------+-------------------------------- Reporter: aruminat@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.2 Keywords: | Port: eblook ------------------------+-------------------------------- With the following error, eblook 1.6.1-media-20110801_0 failed to build with xcode 6.1 on Yosemite: {{{ eblook.c:482:39: error: use of undeclared identifier 'CPPFunction' rl_attempted_completion_function = (CPPFunction *)fileman_completion; ^ eblook.c:482:52: error: expected expression rl_attempted_completion_function = (CPPFunction *)fileman_completion; [snip] eblook.c:4366:8: error: use of undeclared identifier 'CPFunction' (CPFunction *) command_generator); ^ eblook.c:4366:20: error: expected expression (CPFunction *) command_generator); ^ 7 warnings and 4 errors generated. }}} -- Ticket URL: <https://trac.macports.org/ticket/45690> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #45832: defect: policykit 0.112_1 cannot be built on PPC Tiger and Leopard because it needs Clang 3.4 which cannot be built
by MacPorts 02 Oct '16

02 Oct '16

#45832: defect: policykit 0.112_1 cannot be built on PPC Tiger and Leopard because it needs Clang 3.4 which cannot be built -----------------------------+-------------------------------- Reporter: Peter_Dyballa@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.2 Keywords: | Port: policykit -----------------------------+-------------------------------- See [44320]. This must be a defect inside the Portfile, because {{{ port info policykit }}} mentions {{{ Build Dependencies: pkgconfig, intltool, gtk-doc, autoconf, automake, libtool Library Dependencies: glib2, gobject-introspection, mozjs17 }}} and no Clang – although I have no idea what mozjs17 might me. Part of *some* Firefox? I have installed on PPC Mac OS X 10.5.8, Leopard: {{{ port installed | egrep 'pkgconfig|intltool|gtk- doc|autoconf|automake|libtool|glib2|gobject- introspection|mozjs17|gcc|clang|llvm' autoconf @2.69_2 (active) autoconf213 @2.13_1 (active) automake @1.14.1_2 (active) cctools @806_3+llvm33 (active) clang-3.3 @3.3_5+analyzer+python27 (active) clang_select @1.0_0 (active) gcc48 @4.8.3_0 gcc48 @4.8.3_1 (active) gcc49 @4.9.1_0 (active) gcc_select @0.1_8 (active) gccmakedep @1.0.3_0 (active) glib2 @2.42.0_1 (active) gobject-introspection @1.42.0_0 (active) gtk-doc @1.21_1 (active) intltool @0.50.2_3+perl5_16 (active) ld64 @97.17_3+llvm31 (active) libgcc @4.9.1_0 libgcc @4.9.1_1 (active) libtool @2.4.2_5 (active) llvm-3.1 @3.1_8 (active) llvm-3.3 @3.3_4 (active) llvm-3.4 @3.4.2_0 (active) llvm_select @1.0_0 (active) pkgconfig @0.28_0 (active) }}} -- Ticket URL: <https://trac.macports.org/ticket/45832> MacPorts <https://www.macports.org/> Ports system for OS X

1 24

[MacPorts] #47764: Ghostscript 9.16 does not build on PPC Tiger (Mac OS X 10.4.11) because of prototype
by MacPorts 02 Oct '16

02 Oct '16

#47764: Ghostscript 9.16 does not build on PPC Tiger (Mac OS X 10.4.11) because of prototype -----------------------------+-------------------------------- Reporter: Peter_Dyballa@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: ghostscript -----------------------------+-------------------------------- {{{ /opt/local/bin/gcc-apple-4.2 -DHAVE_MKSTEMP -DHAVE_FSEEKO -DHAVE_FONTCONFIG -DHAVE_LIBIDN -DHAVE_SETLOCALE -DHAVE_BSWAP32 -DHAVE_STRERROR -DHAVE_PREAD_PWRITE=1 -DGS_RECURSIVE_MUTEXATTR=PTHREAD_MUTEX_RECURSIVE -O2 -isystem/opt/local/include -Wall -Wstrict-prototypes -Wundef -Wmissing- declarations -Wmissing-prototypes -Wwrite-strings -Wno-strict-aliasing -Werror=declaration-after-statement -fno-builtin -fno-common -Werror =return-type -DHAVE_STDINT_H=1 -DHAVE_DIRENT_H=1 -DHAVE_SYS_DIR_H=1 -DHAVE_SYS_TIME_H=1 -DHAVE_SYS_TIMES_H=1 -DHAVE_INTTYPES_H=1 -DGX_COLOR_INDEX_TYPE="unsigned long long" -D__USE_UNIX98=1 -D"strnlen(a,b)=strlen(a)" -pipe -Os -arch ppc -DUSE_LIBICONV_GNU -DUSE_LIBPAPER -I/opt/local/include -I./soobj -I./base -I./devices -DWHICH_CMS="lcms2" -I./trio -o ./soobj/gssprintf_0.o -c ./base/gssprintf.c In file included from ./trio/trio.h:35, from ./base/gssprintf.c:19: ./trio/triop.h:407: error: type qualifiers ignored on function return type make[2]: *** [soobj/gssprintf_0.o] Error 1 make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_lil.fr.rsync.macports.org_release_tarballs_ports_print_ghostscript/ghostscript/work/ghostscript-9.16' }}} The error happens with a patched version of Portfile which does not allow the use of Clang/llvm 3.3; Clang/llvm 3.4 are installed. -- Ticket URL: <https://trac.macports.org/ticket/47764> MacPorts <https://www.macports.org/> Ports system for OS X

1 8

[MacPorts] #46132: openjade fails to build on OSX Lion
by MacPorts 30 Sep '16

30 Sep '16

#46132: openjade fails to build on OSX Lion -----------------------------+-------------------------------- Reporter: pilgrimaflame@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: openjade | Port: openjade -----------------------------+-------------------------------- openjade fails to build on OSX Lion, with Xcode 4.2.1 installed. I get the following error code output in Terminal. {{{ #!div style="font-size: 80%" Code highlighting: {{{#!python ---> Building openjade Error: org.macports.build for port openjade returned: command execution failed }}} }}} -- Ticket URL: <https://trac.macports.org/ticket/46132> MacPorts <https://www.macports.org/> Ports system for OS X

1 11