June 2015 - macports-tickets - lists.macosforge.org

[MacPorts] #47071: Port submission: Calligra Suite 2.9.0
by MacPorts 15 Oct '15

15 Oct '15

#47071: Port submission: Calligra Suite 2.9.0 -------------------------+-------------------------------- Reporter: rjvbertin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: calligra -------------------------+-------------------------------- This is a port of the Calligra Suite project, the recently release version 2.9.0 . https://www.calligra.org/ It is the successor to KOffice (KDE Office) and provides an alternative to the monolithic "bureautics" suites like OpenOffice and LibreOffice. I personally find it comparable, interface-wise, to Apple iWork 09 . It also provides a PhotoShop alternative (Krita), an Adobe Illustrator/Inkscape alternative (Karbon), a database application loosely inspired by Filemaker (Kexi) and a few other goodies like Braindump. The applications install into /Applications/MacPorts/KDE4/Calligra-Suite . I have provided several variants to control the components that get installed. +office will install the OS X product set provided by the Calligra team, which basically provides the usual wordprocessing, spreadsheet, presentation etc. components. `+all` builds the full suite, while the main port only installs the creative components (Krita, Karbon), the database app (Kexi) and Braindump. Those are the components I think have the least open source alternatives that run natively on OS X. The default variant (main port) was chosen for 2 reasons: 1) install footprint and 2) an issue that currently exists affects Karbon and CalligraFlow which each launch like the other (i.e. launching Karbon gives CalligraFlow and vice versa). Caveat emptor: this port depends on a considerable number of ports of which I'm not sure they're already committed or even submitted here. Don't hesitate to inform me which ones do not have a trac ticket yet. -- Ticket URL: <https://trac.macports.org/ticket/47071> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #46608: qt4-mac: avoid zombie processes
by MacPorts 14 Oct '15

14 Oct '15

#46608: qt4-mac: avoid zombie processes -------------------------+-------------------------------- Reporter: rjvbertin@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: haspatch | Port: qt4-mac -------------------------+-------------------------------- This one has (also) already been presented (because included) in my qt4-mac concurrent ticket, but a bit of independent exposure might be good. Starting a non-existant command through QProcess leads to zombie processes, i.e. inactive, post-termination processes that cannot exit completely because of an open link to their parent process (in this case). This is a bug for which a patch has been contributed but not yet included in Qt4: {{{ # (25) avoid leaving zombies when starting an inexisting executable through QProcess patchfiles-append \ qprocess-nozombies.patch }}} -- Ticket URL: <https://trac.macports.org/ticket/46608> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #47761: rust @0.12.0-pre-20140903-8a89867 funny characters in description
by MacPorts 13 Oct '15

13 Oct '15

#47761: rust @0.12.0-pre-20140903-8a89867 funny characters in description -------------------------+-------------------- Reporter: dstrubbe@… | Owner: g5pw@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: rust -------------------------+-------------------- If you are viewing 'port info rust' in a shell without some kind of UTF support set up, you see this: {{{ Description: Rust is a curly-brace, block-structured expression language. It visually resembles the C language family, but differs significantly in syntactic and semantic details. Its design is oriented toward concerns of âprogramming in the largeâ both abstract and operational â that preserve large-system integrity, availability and concurrency. }}} The offending characters can easily be changing to standard ones so that the description will look reasonable to everyone. See attached patch. -- Ticket URL: <https://trac.macports.org/ticket/47761> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #45455: Cannot compile, no valid compiler found
by MacPorts 13 Oct '15

13 Oct '15

#45455: Cannot compile, no valid compiler found -----------------------------+-------------------------------- Reporter: Ralf+MacPorts@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.3.2 Keywords: compiler | Port: mysql5 -----------------------------+-------------------------------- Port cannot be upgraded due to no compiler found: {{{ $ sudo port -c upgrade outdated Password: Warning: All compilers are either blacklisted or unavailable; defaulting to first fallback option ---> Computing dependencies for mysql5 ---> Building mysql5 Error: org.macports.build for port mysql5 returned: command execution failed Please see the log file for port mysql5 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_databases_mysql5/mysql5/main.log Error: Unable to upgrade port: 1 }}} Previously I had `llvm-gcc42` installed, but got the same error. So I uninstalled this compiler and installed `llvm-3.6`, same thing. I'm on Yosemite, using Xcode 6.1 (release). -- Ticket URL: <https://trac.macports.org/ticket/45455> MacPorts <https://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #47369: Freecad upgrade fails
by MacPorts 12 Oct '15

12 Oct '15

#47369: Freecad upgrade fails ------------------------------------+-------------------------------- Reporter: dersh@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: mark.brethen(a)gmail.com | Port: freecad ------------------------------------+-------------------------------- I just tried to upgrade freecad from 0.14.3702_0 to 0.14.3702_1 but the upgrade fails. The log ends with: {{{ :info:build Linking CXX shared library ../../../../Mod/Part/Part.so :info:build cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/freecad-0.14.3702/src/Mod/Part/App && /opt/local/bin/cmake -E cmake_link_script CMakeFiles/Part.dir/link.txt --verbose=ON :info:build /Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang++ -pipe -Os -arch x86_64 -stdlib=libc++ -Wno-deprecated -Wno-write-strings -D_OCC64 -DNDEBUG -arch x86_64 -mmacosx-version-min=10.10 -dynamiclib -Wl,-headerpad_max_install_names -L/opt/local/lib -Wl,-headerpad_max_install_names -L/opt/local/lib/gcc48/gcc/x86_64-apple- darwin14/4.8.4/../../.. -o ../../../../Mod/Part/Part.so -install_name /opt/local/libexec/freecad/lib/Part.so CMakeFiles/Part.dir/FeaturePartBoolean.cpp.o CMakeFiles/Part.dir/FeaturePartBox.cpp.o CMakeFiles/Part.dir/FeaturePartCircle.cpp.o CMakeFiles/Part.dir/FeaturePartCommon.cpp.o CMakeFiles/Part.dir/FeaturePartCurveNet.cpp.o CMakeFiles/Part.dir/FeaturePartCut.cpp.o CMakeFiles/Part.dir/FeaturePartFuse.cpp.o CMakeFiles/Part.dir/FeaturePartImportBrep.cpp.o CMakeFiles/Part.dir/FeaturePartImportIges.cpp.o CMakeFiles/Part.dir/FeaturePartImportStep.cpp.o CMakeFiles/Part.dir/FeaturePartPolygon.cpp.o CMakeFiles/Part.dir/FeaturePartSection.cpp.o CMakeFiles/Part.dir/FeaturePartSpline.cpp.o CMakeFiles/Part.dir/FeatureChamfer.cpp.o CMakeFiles/Part.dir/FeatureCompound.cpp.o CMakeFiles/Part.dir/FeatureExtrusion.cpp.o CMakeFiles/Part.dir/FeatureFillet.cpp.o CMakeFiles/Part.dir/FeatureMirroring.cpp.o CMakeFiles/Part.dir/FeatureRevolution.cpp.o CMakeFiles/Part.dir/PartFeatures.cpp.o CMakeFiles/Part.dir/PartFeature.cpp.o CMakeFiles/Part.dir/PartFeatureReference.cpp.o CMakeFiles/Part.dir/Part2DObject.cpp.o CMakeFiles/Part.dir/PrimitiveFeature.cpp.o CMakeFiles/Part.dir/FeatureGeometrySet.cpp.o CMakeFiles/Part.dir/CustomFeature.cpp.o CMakeFiles/Part.dir/PropertyTopoShape.cpp.o CMakeFiles/Part.dir/PropertyGeometryList.cpp.o CMakeFiles/Part.dir/ArcPyImp.cpp.o CMakeFiles/Part.dir/ArcOfCirclePyImp.cpp.o CMakeFiles/Part.dir/CirclePyImp.cpp.o CMakeFiles/Part.dir/EllipsePyImp.cpp.o CMakeFiles/Part.dir/HyperbolaPyImp.cpp.o CMakeFiles/Part.dir/ParabolaPyImp.cpp.o CMakeFiles/Part.dir/OffsetCurvePyImp.cpp.o CMakeFiles/Part.dir/GeometryPyImp.cpp.o CMakeFiles/Part.dir/GeometryCurvePyImp.cpp.o CMakeFiles/Part.dir/GeometrySurfacePyImp.cpp.o CMakeFiles/Part.dir/LinePyImp.cpp.o CMakeFiles/Part.dir/PointPyImp.cpp.o CMakeFiles/Part.dir/BezierCurvePyImp.cpp.o CMakeFiles/Part.dir/BSplineCurvePyImp.cpp.o CMakeFiles/Part.dir/PlanePyImp.cpp.o CMakeFiles/Part.dir/ConePyImp.cpp.o CMakeFiles/Part.dir/CylinderPyImp.cpp.o CMakeFiles/Part.dir/SpherePyImp.cpp.o CMakeFiles/Part.dir/ToroidPyImp.cpp.o CMakeFiles/Part.dir/BezierSurfacePyImp.cpp.o CMakeFiles/Part.dir/BSplineSurfacePyImp.cpp.o CMakeFiles/Part.dir/OffsetSurfacePyImp.cpp.o CMakeFiles/Part.dir/RectangularTrimmedSurfacePyImp.cpp.o CMakeFiles/Part.dir/SurfaceOfExtrusionPyImp.cpp.o CMakeFiles/Part.dir/SurfaceOfRevolutionPyImp.cpp.o CMakeFiles/Part.dir/PartFeaturePyImp.cpp.o CMakeFiles/Part.dir/Part2DObjectPyImp.cpp.o CMakeFiles/Part.dir/TopoShapePyImp.cpp.o CMakeFiles/Part.dir/TopoShapeCompSolidPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeCompoundPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeEdgePyImp.cpp.o CMakeFiles/Part.dir/TopoShapeFacePyImp.cpp.o CMakeFiles/Part.dir/TopoShapeShellPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeSolidPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeVertexPyImp.cpp.o CMakeFiles/Part.dir/TopoShapeWirePyImp.cpp.o CMakeFiles/Part.dir/BRepOffsetAPI_MakePipeShellPyImp.cpp.o CMakeFiles/Part.dir/AppPart.cpp.o CMakeFiles/Part.dir/AppPartPy.cpp.o CMakeFiles/Part.dir/CrossSection.cpp.o CMakeFiles/Part.dir/Geometry.cpp.o CMakeFiles/Part.dir/ImportIges.cpp.o CMakeFiles/Part.dir/ImportStep.cpp.o CMakeFiles/Part.dir/PreCompiled.cpp.o CMakeFiles/Part.dir/ProgressIndicator.cpp.o CMakeFiles/Part.dir/TopoShape.cpp.o CMakeFiles/Part.dir/edgecluster.cpp.o CMakeFiles/Part.dir/modelRefine.cpp.o CMakeFiles/Part.dir/FT2FC.cpp.o /opt/local/lib/libTKIGES.8.0.0.dylib /opt/local/lib/libTKSTL.8.0.0.dylib /opt/local/lib/libTKOffset.8.0.0.dylib /opt/local/lib/libTKSTEP.8.0.0.dylib /opt/local/lib/libTKSTEPAttr.8.0.0.dylib /opt/local/lib/libTKHLR.8.0.0.dylib /opt/local/lib/libTKFeat.8.0.0.dylib ../../../../lib/libFreeCADApp.so /opt/local/lib/libfreetype.dylib /opt/local/lib/libTKFillet.8.0.0.dylib /opt/local/lib/libTKMesh.8.0.0.dylib /opt/local/lib/libTKSTEP209.8.0.0.dylib /opt/local/lib/libTKSTEPBase.8.0.0.dylib /opt/local/lib/libTKXSBase.8.0.0.dylib /opt/local/lib/libTKBool.8.0.0.dylib /opt/local/lib/libTKShHealing.8.0.0.dylib /opt/local/lib/libTKBO.8.0.0.dylib /opt/local/lib/libTKPrim.8.0.0.dylib /opt/local/lib/libTKTopAlgo.8.0.0.dylib /opt/local/lib/libTKGeomAlgo.8.0.0.dylib /opt/local/lib/libTKBRep.8.0.0.dylib /opt/local/lib/libTKGeomBase.8.0.0.dylib /opt/local/lib/libTKG3d.8.0.0.dylib /opt/local/lib/libTKG2d.8.0.0.dylib /opt/local/lib/libTKMath.8.0.0.dylib /opt/local/lib/libTKernel.8.0.0.dylib -lm ../../../../lib/libFreeCADBase.so /opt/local/Library/Frameworks/Python.framework/Versions/2.7/Python /opt/local/lib/libxerces-c.dylib /opt/local/lib/libQtCore.dylib /opt/local/lib/libz.dylib -lutil -ldl /opt/local/lib/libboost_filesystem- mt.dylib /opt/local/lib/libboost_program_options-mt.dylib /opt/local/lib /libboost_regex-mt.dylib /opt/local/lib/libboost_signals-mt.dylib /opt/local/lib/libboost_system-mt.dylib /opt/local/lib/libboost_thread- mt.dylib -Wl,-rpath,/opt/local/libexec/freecad/lib :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/freecad-0.14.3702' :info:build /opt/local/bin/cmake -E cmake_progress_report /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/freecad-0.14.3702/CMakeFiles 60 61 62 63 64 65 :info:build [ 40%] Built target Part :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/freecad-0.14.3702' :info:build make: *** [all] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/freecad-0.14.3702' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/work/freecad-0.14.3702" && /usr/bin/make -j8 -w all VERBOSE=ON :info:build Exit code: 2 :error:build org.macports.build for port freecad returned: command execution failed :debug:build Error code: CHILDSTATUS 25076 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "portbuild::build_main org.macports.build" ("eval" body line 1) invoked from within "eval $procedure $targetname" :info:build Warning: targets not executed for freecad: org.macports.install org.macports.build org.macports.destroot :notice:build Please see the log file for port freecad for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_cad_freecad/freecad/main.log }}} -- Ticket URL: <https://trac.macports.org/ticket/47369> MacPorts <https://www.macports.org/> Ports system for OS X

1 11

[MacPorts] #46740: Error: Processing of port wget failed
by MacPorts 12 Oct '15

12 Oct '15

#46740: Error: Processing of port wget failed -------------------------+-------------------------------- Reporter: dntuyen86@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: -------------------------+-------------------------------- Cannot install wget on MacOS 10.10 Yosemite Please see the text bellow for more detail -------------------- Dangs-MacBook-Pro:build tuyendn$ sudo port install wget Password: Warning: /opt/local/etc/macports/variants.conf specifies invalid variant syntax '', ignored. Warning: /opt/local/etc/macports/variants.conf specifies invalid variant syntax '', ignored. Warning: /opt/local/etc/macports/variants.conf specifies invalid variant syntax '', ignored. ---> Computing dependencies for wget ---> Dependencies to be installed: gnutls gmp libtasn1 nettle p11-kit desktop-file-utils popt libxslt pcre ---> Configuring gmp Error: Failed to configure gmp, consult /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_gmp/gmp/work/gmp-6.0.0-x86_64/config.log Error: org.macports.configure for port gmp returned: configure failure: command execution failed Error: Failed to install gmp Please see the log file for port gmp for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_gmp/gmp/main.log Error: The following dependencies were not installed: gnutls gmp libtasn1 nettle p11-kit desktop-file-utils popt libxslt pcre To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port wget failed -- Ticket URL: <https://trac.macports.org/ticket/46740> MacPorts <https://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #47760: Upgrade freecad to 0.15
by MacPorts 12 Oct '15

12 Oct '15

#47760: Upgrade freecad to 0.15 ---------------------+-------------------------------- Reporter: dersh@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: freecad ---------------------+-------------------------------- Freecad has been upgraded to 0.15, so this is a request to update the port to the newer version. -- Ticket URL: <https://trac.macports.org/ticket/47760> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #46157: freecad App wrapper
by MacPorts 12 Oct '15

12 Oct '15

#46157: freecad App wrapper ----------------------------+-------------------------------- Reporter: mschamschula@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: haspatch | Port: freecad ----------------------------+-------------------------------- I've added an OS X GUI wrapper for /Applications/MacPorts/FreeCAD. -- Ticket URL: <https://trac.macports.org/ticket/46157> MacPorts <https://www.macports.org/> Ports system for OS X

1 10

[MacPorts] #46893: Coffescript does not compile js anymore
by MacPorts 09 Oct '15

09 Oct '15

#46893: Coffescript does not compile js anymore -----------------------------------------+-------------------------------- Reporter: andrew@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.3.3 Keywords: coffeescript, coffee-script | Port: coffee-script -----------------------------------------+-------------------------------- Hi The latest updates seem to have broken coffeescript. $ coffee -b -c -o working/js coffee TypeError: undefined is not a function at writeJs (/opt/local/lib/coffee-script/lib/coffee- script/command.js:413:17) at compileScript (/opt/local/lib/coffee-script/lib/coffee- script/command.js:185:18) at /opt/local/lib/coffee-script/lib/coffee-script/command.js:150:18 at fs.js:336:14 at FSReqWrap.oncomplete (fs.js:99:15) -- Ticket URL: <https://trac.macports.org/ticket/46893> MacPorts <https://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #45980: fail2ban version is rather old
by MacPorts 08 Oct '15

08 Oct '15

#45980: fail2ban version is rather old -----------------------------+-------------------------------- Reporter: luc_j_bourhis@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: fail2ban -----------------------------+-------------------------------- Current version of fail2ban according to the official page at [http://www.fail2ban.org/wiki/index.php/Main_Page] is 0.9.1 whereas Macports ships 0.8.10. -- Ticket URL: <https://trac.macports.org/ticket/45980> MacPorts <https://www.macports.org/> Ports system for OS X

1 6