August 2015 - macports-tickets - lists.macosforge.org

Re: [MacPorts] #44658: Encfs fails to mount after the recent upgrade
by MacPorts 25 Aug '15

25 Aug '15

#44658: Encfs fails to mount after the recent upgrade -----------------------+------------------------------- Reporter: kacnow@… | Owner: Markus.Ueberall@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.1 Resolution: | Keywords: Port: encfs | -----------------------+------------------------------- Changes (by ryandesign@…): * cc: ryandesign@… (added) * owner: macports-tickets@… => Markus.Ueberall@… Comment: This happened again when boost was updated to 1.59.0; see #48696. The port has been updated to 1.8.1 since then so no further changes are needed at this time. -- Ticket URL: <https://trac.macports.org/ticket/44658#comment:13> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #48694: boost @1.59.0_0 does not install on PPC Leopard, Mac OS X 10.5.8, because of missing utility lbzip2
by MacPorts 25 Aug '15

25 Aug '15

#48694: boost @1.59.0_0 does not install on PPC Leopard, Mac OS X 10.5.8, because of missing utility lbzip2 -----------------------------+-------------------------------- Reporter: Peter_Dyballa@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: boost -----------------------------+-------------------------------- The builds ends with {{{ ...failed updating 1 target... ...skipped 1 target... ...updated 526 targets... Command failed: cd "/opt/local/var/macports/build/_opt_mports_trunk_dports_devel_boost/boost/work/boost_1_59_0" && /opt/local/var/macports/build/_opt_mports_trunk_dports_devel_boost/boost/work/boost_1_59_0/b2 -d2 --layout=tagged --debug-configuration --user-config=user-config.jam -sBZIP2_INCLUDE=/opt/local/include -sBZIP2_LIBPATH=/opt/local/lib -sEXPAT_INCLUDE=/opt/local/include -sEXPAT_LIBPATH=/opt/local/lib -sZLIB_INCLUDE=/opt/local/include -sZLIB_LIBPATH=/opt/local/lib -sICU_PATH=/opt/local variant=release -j1 architecture=power address- model=32 --disable-long-double link=shared threading=multi Exit code: 1 }}} but it's actually this, a few lines below, that names the cause: {{{ DEBUG: Failed to locate 'lbzip2' in path: '/opt/local/bin:/opt/local/sbin:/bin:/sbin:/usr/bin:/usr/sbin' or at its MacPorts configuration time location, did you move it? }}} Although it's useless to install a parallel bzip2 on a 7447A CPU I have started `port install lbzip2`… -- Ticket URL: <https://trac.macports.org/ticket/48694> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #47715: encfs update to version 1.8.1
by MacPorts 25 Aug '15

25 Aug '15

#47715: encfs update to version 1.8.1 --------------------------------+-------------------------------- Reporter: alexey.naidyonov@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: encfs --------------------------------+-------------------------------- Hello; Please find attached encfs update to version 1.8.1. -- Ticket URL: <https://trac.macports.org/ticket/47715> MacPorts <https://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #47475: EncFS is outdated
by MacPorts 25 Aug '15

25 Aug '15

#47475: EncFS is outdated ----------------------------------+-------------------------------- Reporter: spamivore+macports@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: encfs ----------------------------------+-------------------------------- Currently, EncFS in MacPorts is version 1.7.5. The latest upstream release is 1.8.1. Please see https://github.com/vgough/encfs/releases for details. -- Ticket URL: <https://trac.macports.org/ticket/47475> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #48702: Failed to build gcc49 in dependencies for py34-scipy
by MacPorts 25 Aug '15

25 Aug '15

#48702: Failed to build gcc49 in dependencies for py34-scipy --------------------------+-------------------------------- Reporter: resmi.raju@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: --------------------------+-------------------------------- I tried to install QuTips on my mac osx 10.10. Am following these two documentation for installation Qutip and MacPorts. Now am struggle to install gcc49. When i execute this command sudo port install py34-scipy I got the following error {{{ Admins-iMac-2:base admin$ sudo port install py27-scipy ---> Computing dependencies for py27-scipy The following dependencies will be installed: gcc49 py27-numpy swig swig-python Continue? [Y/n]: y ---> Building gcc49 Error: Failed to build gcc49: command execution failed Error: See /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/main.log for details. Error: Follow http://guide.macports.org/#project.tickets to report a bug. Error: Processing of port py27-scipy failed Admins-iMac-2:base admin$ sudo port install py34-numpy ---> Computing dependencies for py34-numpy The following dependencies will be installed: gcc49 Continue? [Y/n]: y ---> Building gcc49 Error: Failed to build gcc49: command execution failed Error: See /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/main.log for details. Error: Follow http://guide.macports.org/#project.tickets to report a bug. Error: Processing of port py34-numpy failed Admins-iMac-2:base admin$ vi /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/main.log Admins-iMac-2:base admin$ }}} I go and look for main.log file. At the end of this file i got below errors {{{ :info:build gcc/vtable-verify.o differs :info:build make[2]: *** [compare] Error 1 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/work/build' :info:build make[1]: *** [stage3-bubble] Error 2 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/work/build' :info:build make: *** [bootstrap] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/work/build' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/work/build" && /usr/bin/make -j4 -w bootstrap :info:build Exit code: 2 :error:build Failed to build gcc49: command execution failed :debug:build Error code: CHILDSTATUS 2595 2 :debug:build Backtrace: command execution failed :debug:build while executing :debug:build "system {*}$notty {*}$nice $fullcmdstring" :debug:build invoked from within :debug:build "command_exec build" :debug:build (procedure "portbuild::build_main" line 8) :debug:build invoked from within :debug:build "$procedure $targetname" :debug:build Registry error: gcc49 not registered as installed & active. :debug:build invoked from within :debug:build "registry_active $subport" :debug:build invoked from within :debug:build "$workername eval registry_active \$subport" :error:build See /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_lang_gcc49/gcc49/main.log for details. }}} Am not familiar with this. I cannot complete installation without this gcc49. Alternatively i install gcc48, but dosen't work for me. Every time it automatically tried ti install gcc49. -- Ticket URL: <https://trac.macports.org/ticket/48702> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #48663: notmuch 0.19 Request to maintain this port
by MacPorts 25 Aug '15

25 Aug '15

#48663: notmuch 0.19 Request to maintain this port ------------------------+-------------------------------- Reporter: cceleri@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: haspatch | Port: notmuch ------------------------+-------------------------------- Hello, I have a series of patches ready to apply to this port. I would like to request to be its maintainer as my first patch. There are few more tickets to follow this one. Best, Charles -- Ticket URL: <https://trac.macports.org/ticket/48663> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #48386: groovy @2.4.3_0: update to 2.4.4
by MacPorts 25 Aug '15

25 Aug '15

#48386: groovy @2.4.3_0: update to 2.4.4 ---------------------------------+-------------------------------- Reporter: nils@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: haspatch maintainer | Port: groovy ---------------------------------+-------------------------------- http://www.groovy-lang.org/changelogs/changelog-2.4.4.html -- Ticket URL: <https://trac.macports.org/ticket/48386> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #48658: kerberos5 doesn't have defined destroot
by MacPorts 25 Aug '15

25 Aug '15

#48658: kerberos5 doesn't have defined destroot ------------------------------+-------------------------------- Reporter: jean.p.chauvel@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: kerberos5 ------------------------------+-------------------------------- {{{ $ sudo port install kerberos5 ---> Computing dependencies for kerberos5 ---> Installing kerberos5 @1.13.2_0 Error: org.macports.install for port kerberos5 returned: no destroot found at: /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_kerberos5/kerberos5/work/destroot Please see the log file for port kerberos5 for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_kerberos5/kerberos5/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port kerberos5 failed }}} -- Ticket URL: <https://trac.macports.org/ticket/48658> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #48687: libnetpbm: fetch fails on El Capitan beta
by MacPorts 25 Aug '15

25 Aug '15

#48687: libnetpbm: fetch fails on El Capitan beta ----------------------+-------------------------------- Reporter: smaret@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: libnetbm ----------------------+-------------------------------- libnetpbm installation on El Capitan beta fails with the following messages: {{{ ---> Fetching distfiles for libnetpbm Error: org.macports.fetch for port libnetpbm returned: can't read "proxy_host": no such variable Error: Failed to install libnetpbm }}} This seems to be a different error than #48600. -- Ticket URL: <https://trac.macports.org/ticket/48687> MacPorts <https://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #48657: Problem with boost_1_59_0.tar.bz2
by MacPorts 24 Aug '15

24 Aug '15

#48657: Problem with boost_1_59_0.tar.bz2 ------------------------+-------------------------------- Reporter: bbrodeau@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: ------------------------+-------------------------------- Hello, After a "sudo port -vvv selfupdate && sudo port -vvv upgrade outdated", I obtain this following message : ---> Computing dependencies for boost. ---> Verifying checksums for boost ---> Checksumming boost_1_59_0.tar.bz2 Error: org.macports.checksum for port boost returned: boost_1_59_0.tar.bz2 does not exist in /opt/local/var/macports/distfiles/boost Warning: targets not executed for boost: org.macports.install org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot Please see the log file for port boost for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_devel_boost/boost/main.log Error: Unable to upgrade port: 1 Thanks. Valorisa -- Ticket URL: <https://trac.macports.org/ticket/48657> MacPorts <https://www.macports.org/> Ports system for OS X

1 4