September 2015 - macports-tickets - lists.macosforge.org

[MacPorts] #47934: libvpx should be in depends_build not depends_lib
by MacPorts 08 Jan '16

08 Jan '16

#47934: libvpx should be in depends_build not depends_lib -------------------------+------------------------------------------------- Reporter: | Owner: ryandesign@… ryandesign@… | Status: new Type: defect | Milestone: Priority: Normal | Version: 2.3.3 Component: ports | Port: avidemux, ffmpeg, ffmpeg-devel, Keywords: | gd2, gstreamer010-gst-plugins-bad, gstreamer1 | -gst-plugins-good -------------------------+------------------------------------------------- libvpx installs a static library only, so dependents should list libvpx in depends_build, not depends_lib. Right? I can make this change, but want to verify with you that it's correct first. -- Ticket URL: <https://trac.macports.org/ticket/47934> MacPorts <https://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #46381: wireshark @1.12.2 configure error - unable to locate kerberos
by MacPorts 07 Jan '16

07 Jan '16

#46381: wireshark @1.12.2 configure error - unable to locate kerberos -----------------------+-------------------------------- Reporter: sayhong@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: wireshark | Port: wireshark -----------------------+-------------------------------- I wanted to run wireshark via macports with some patches to be made before compiling. What i did[[BR]] $ sudo port selfupdate[[BR]] MacPorts base version 2.3.3 installed. Following I did,[[BR]] $ sudo port -v extract wireshark [[BR]] I did some patching to wireshark plugins. Then I ran [[BR]] $ sudo port -v destroot wireshark [[BR]] This threw up an error about 'checking whether the Kerberos library is Heimdal or MIT... no'. [[BR]] I tried installing wireshark via the normal installation (i.e. sudo port -v install wireshark). It works but I was not able to insert additional files for compilation. Any ideas? [[BR]] Output of running 'sudo port -v destroot wireshark' {{{ checking whether to use SSL library... yes checking for EVP_md5 in -lcrypto... yes checking whether to use Kerberos library... yes checking krb5.h usability... yes checking krb5.h presence... yes checking for krb5.h... yes checking whether the Kerberos library is Heimdal or MIT... no configure: error: Kerberos not found make: *** [config.status] Error 1 make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_wireshark/wireshark/work/wireshark-1.12.2' Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_wireshark/wireshark/work/wireshark-1.12.2" && /usr/bin/make -j8 -w all Exit code: 2 Error: org.macports.build for port wireshark returned: command execution failed Warning: targets not executed for wireshark: org.macports.destroot org.macports.build }}} Config.log {{{ configure:35285: /usr/bin/clang -o conftest -mmacosx-version-min=10.9 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk -pipe -Os -arch x86_64 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat- security -fwrapv -Wold-style-definition -Wshorten-64-to-32 -Wstrict- prototypes -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wheader-guard -Wshadow -Wno-deprecated-declarations -fvisibility=hidden -D_REENTRANT -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include -I/opt/local/include/cairo -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/libpng16 -I/opt/local/include -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/libpng16 -I/opt/local/include/pango-1.0 -I/opt/local/include/harfbuzz -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/freetype2 -DINET6 -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -DGSEAL_ENABLE -DGTK_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -I/opt/local/include -D_FORTIFY_SOURCE=2 -I/opt/local/include -I/opt/local/include -Wl,-search_paths_first -Wl,-rpath,@executable_path/../lib -Wl,-rpath,@executable_path/../Frameworks -Wl,-rpath,/usr/local/lib -mmacosx-version-min=10.9 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk -L/opt/local/lib -Wl,-headerpad_max_install_names -Wl,-search_paths_first -arch x86_64 -L/opt/local/lib -L/opt/local/lib conftest.c -lcrypto -L/opt/local/lib -lz >&5 configure:35285: $? = 0 configure:35294: result: yes configure:35312: checking whether to use Kerberos library configure:35344: result: yes configure:35458: checking krb5.h usability configure:35458: /usr/bin/clang -c -mmacosx-version-min=10.9 -isysroot /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.9.sdk -pipe -Os -arch x86_64 -Wall -W -Wextra -Wdeclaration-after-statement -Wendif-labels -Wpointer-arith -Wno-pointer-sign -Warray-bounds -Wformat- security -fwrapv -Wold-style-definition -Wshorten-64-to-32 -Wstrict- prototypes -Wvla -Waddress -Wattributes -Wdiv-by-zero -Wignored-qualifiers -Wno-overlength-strings -Wwrite-strings -Wno-long-long -Wc++-compat -Wheader-guard -Wshadow -Wno-deprecated-declarations -fvisibility=hidden -D_REENTRANT -I/opt/local/include/gtk-2.0 -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/gio-unix-2.0/ -I/opt/local/include -I/opt/local/include/cairo -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/include/pixman-1 -I/opt/local/include/libpng16 -I/opt/local/include -I/opt/local/include/gdk-pixbuf-2.0 -I/opt/local/include/libpng16 -I/opt/local/include/pango-1.0 -I/opt/local/include/harfbuzz -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/freetype2 -I/opt/local/include -I/opt/local/include/freetype2 -DINET6 -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -DGSEAL_ENABLE -DGTK_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -I/opt/local/include -D_FORTIFY_SOURCE=2 -I/opt/local/include -I/opt/local/include -I/opt/local/include conftest.c >&5 configure:35458: $? = 0 configure:35458: result: yes configure:35458: checking krb5.h presence configure:35458: /usr/bin/clang -E -DINET6 -DG_DISABLE_DEPRECATED -DG_DISABLE_SINGLE_INCLUDES -DGSEAL_ENABLE -DGTK_DISABLE_SINGLE_INCLUDES -DGTK_DISABLE_DEPRECATED -DGDK_DISABLE_DEPRECATED -DGDK_PIXBUF_DISABLE_DEPRECATED -I/opt/local/include -D_FORTIFY_SOURCE=2 -I/opt/local/include -I/opt/local/include -I/opt/local/include conftest.c configure:35458: $? = 0 configure:35458: result: yes configure:35458: checking for krb5.h configure:35458: result: yes configure:35502: checking whether the Kerberos library is Heimdal or MIT configure:35644: result: no configure:35652: error: Kerberos not found }}} -- Ticket URL: <https://trac.macports.org/ticket/46381> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #48297: docbook-utils fails to build: missing dependency on sgmlspl
by MacPorts 07 Jan '16

07 Jan '16

#48297: docbook-utils fails to build: missing dependency on sgmlspl ------------------------+-------------------------------- Reporter: jlrobins@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: ------------------------+-------------------------------- While trying to build docbook-utils based off of relatively clean macports installation, build / installation fails: {{{ jlrobins$ sudo port install docbook-utils ---> Computing dependencies for docbook-utils ---> Building docbook-utils Error: org.macports.build for port docbook-utils returned: command execution failed Please see the log file for port docbook-utils for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-utils/docbook-utils/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port docbook-utils failed }}} The tail of /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-utils/docbook-utils/main.log reads: {{{ :info:build SGML_CATALOG_FILES=/opt/local/etc/sgml/catalog \ :info:build SGML_SEARCH_PATH=../../doc:.. \ :info:build onsgmls ../../doc/docbook-utils.sgml | \ :info:build sgmlspl ../../helpers/docbook2man-spec.pl :info:build /bin/sh: sgmlspl: command not found :info:build /bin/sh: sgmlspl: command not found :info:build /bin/sh: sgmlspl: command not found :info:build /bin/sh: sgmlspl: command not found :info:build /bin/sh: sgmlspl: command not found :info:build /bin/sh: sgmlspl: command not found :info:build make[2]: *** [docbook2texi-spec.pl.1] Error 127 :info:build make[2]: *** Waiting for unfinished jobs.... :info:build make[2]: *** [docbook2man-spec.pl.1] Error 127 :info:build make[2]: *** [sgmldiff.1] Error 127 :info:build make[2]: *** [backend-spec.7] Error 127 :info:build make[2]: *** [frontend-spec.7] Error 127 :info:build make[2]: *** [jw.1] Error 127 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-utils/docbook-utils/work /docbook-utils-0.6.14/doc/man' :info:build make[1]: *** [all-recursive] Error 1 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-utils/docbook-utils/work /docbook-utils-0.6.14/doc' :info:build make: *** [all-recursive] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-utils/docbook-utils/work /docbook-utils-0.6.14' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-utils/docbook-utils/work /docbook-utils-0.6.14" && /usr/bin/make -j8 -w all :info:build Exit code: 2 :error:build org.macports.build for port docbook-utils returned: command execution failed :debug:build Error code: CHILDSTATUS 6109 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "portbuild::build_main org.macports.build" ("eval" body line 1) invoked from within "eval $procedure $targetname" :info:build Warning: targets not executed for docbook-utils: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port docbook-utils for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_tarballs_ports_textproc_docbook-utils/docbook-utils/main.log }}} Looks ultimately like missing dependency upon package which provides /opt/local/bin/sgmlspl ? -- Ticket URL: <https://trac.macports.org/ticket/48297> MacPorts <https://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #48352: p5-astro-satpass: upgrade to 0.070
by MacPorts 07 Jan '16

07 Jan '16

#48352: p5-astro-satpass: upgrade to 0.070 ---------------------+------------------------------ Reporter: mojca@… | Owner: pixilla@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: p5-astro-satpass ---------------------+------------------------------ -- Ticket URL: <https://trac.macports.org/ticket/48352> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #46778: libvisio-0.1 @0.1.1 fails building on 10.5.8. PPC
by MacPorts 07 Jan '16

07 Jan '16

#46778: libvisio-0.1 @0.1.1 fails building on 10.5.8. PPC -----------------------------------+-------------------------------- Reporter: braumann@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: constant is too large | Port: libvisio-0.1 -----------------------------------+-------------------------------- Installing {{{libvisio-0.1}}} for the first time lets me end up with this: {{{ :info:build CXX VSDMetaData.lo :info:build VSDMetaData.cpp:229: error: integer constant is too large for 'long' type :info:build make[3]: *** [VSDMetaData.lo] Error 1 }}} This particular line 229 looks like this: {{{ static const uint64_t epoch = 11644473600; }}} Any ideas? -- Ticket URL: <https://trac.macports.org/ticket/46778> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #48825: dolfin @1.6.0_0 +openmpi +suitesparse fails to build
by MacPorts 06 Jan '16

06 Jan '16

#48825: dolfin @1.6.0_0 +openmpi +suitesparse fails to build ----------------------------+-------------------------------- Reporter: mschamschula@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: dolfin ----------------------------+-------------------------------- The update to dolfin 1.6.0 (+openmpi +suitesparse variant) fails to build while compiling modulePYTHON_wrap.cxx. main.log attached. I have had two Yosemite machines fail the same way. -- Ticket URL: <https://trac.macports.org/ticket/48825> MacPorts <https://www.macports.org/> Ports system for OS X

1 9

[MacPorts] #47993: rsnapshot @1.3.1_3: Fails to build due to pod2man syntax error
by MacPorts 06 Jan '16

06 Jan '16

#47993: rsnapshot @1.3.1_3: Fails to build due to pod2man syntax error ----------------------+----------------------- Reporter: raimue@… | Owner: mww@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: haspatch | Port: rsnapshot ----------------------+----------------------- {{{ ---> Building rsnapshot system: cd "/opt/local/var/macports/build/_Users_raimue_src_macports_trunk_dports_sysutils_rsnapshot/rsnapshot/work/rsnapshot-1.3.1" && /usr/bin/make -j8 -w all make: Entering directory `/opt/local/var/macports/build/_Users_raimue_src_macports_trunk_dports_sysutils_rsnapshot/rsnapshot/work/rsnapshot-1.3.1' /usr/bin/pod2man -c '' -n 'rsnapshot' -r '' rsnapshot > rsnapshot.1 /usr/bin/pod2man -c '' -n 'rsnapshot-diff' -r '' rsnapshot-diff > rsnapshot-diff.1 rsnapshot around line 6723: You forgot a '=back' before '=head1' POD document had syntax errors at /usr/bin/pod2man5.18 line 72. make: *** [rsnapshot.1] Error 255 }}} Here is a patch that adds the missing `=back` to get it to compile. I'll leave it to the maintainer to determine whether `/usr/bin/pod2man` is actually the intended tool here. Probably it should be using `${prefix}/bin/pod2man-5.16` instead. But that would be another issue. -- Ticket URL: <https://trac.macports.org/ticket/47993> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #48644: [Port Abandoned] Ports maintained by danner.de:daniel
by MacPorts 06 Jan '16

06 Jan '16

#48644: [Port Abandoned] Ports maintained by danner.de:daniel --------------------+------------------------------------- Reporter: mf2k@… | Owner: daniel@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: liboping liboping-devel --------------------+------------------------------------- daniel has not been [search:daniel@danner.de seen in over a year] and has not responded to recent tickets: #44405 #47975 #48365. Please let us know if you still want to maintain your ports. -- Ticket URL: <https://trac.macports.org/ticket/48644> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #48835: wireshark @1.12.7: Build fails with default variant +lua
by MacPorts 06 Jan '16

06 Jan '16

#48835: wireshark @1.12.7: Build fails with default variant +lua -----------------------------+-------------------------------- Reporter: md14-macports@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: wireshark -----------------------------+-------------------------------- Building wireshark @1.12.7 fails after the upgrade to lua @5.3.1. {{{ $ sudo port -vs install wireshark ... CC lua_bitop.lo CC lrexlib.lo CC lrexlib_glib.lo CC lrexlib_glib_f.lo CC wslua_tvb.lo CC wslua_proto.lo CC wslua_int64.lo CC wslua_tree.lo ./lua_bitop.c:85:2: error: "Unknown number type, check LUA_NUMBER_* in luaconf.h" #error "Unknown number type, check LUA_NUMBER_* in luaconf.h" ^ 1 error generated. make[4]: *** [lua_bitop.lo] Error 1 ... Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_wireshark/wireshark/work/wireshark-1.12.7" && /usr/bin/make -j8 -w all Exit code: 2 Error: org.macports.build for port wireshark returned: command execution failed Warning: targets not executed for wireshark: org.macports.activate org.macports.build org.macports.destroot org.macports.install Please see the log file for port wireshark for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_net_wireshark/wireshark/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port wireshark failed }}} The build succeeds if the lua variant is disabled: {{{ $ sudo port -vs install wireshark -lua }}} For a similar issue with gnuplot and lua, see #48826. -- Ticket URL: <https://trac.macports.org/ticket/48835> MacPorts <https://www.macports.org/> Ports system for OS X

1 33

[MacPorts] #48832: dolfin @1.6.0_0+mpich+suitesparse ImportError
by MacPorts 06 Jan '16

06 Jan '16

#48832: dolfin @1.6.0_0+mpich+suitesparse ImportError ------------------------------+-------------------------------- Reporter: gideon.simpson@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: dolfin ------------------------------+-------------------------------- I just installed the new dolifn port, and I'm still getting: {{{ >>> import dolfin Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/dolfin/__init__.py", line 16, in <module> from . import cpp File "/opt/local/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7 /site-packages/dolfin/cpp/__init__.py", line 42, in <module> exec("from . import %s" % module_name) File "<string>", line 1, in <module> ImportError: cannot import name common }}} -- Ticket URL: <https://trac.macports.org/ticket/48832> MacPorts <https://www.macports.org/> Ports system for OS X

1 3