March 2016 - macports-tickets - lists.macosforge.org

[MacPorts] #48853: curl-ca-bundle @7.44_0: error while fetching
by MacPorts 07 Sep '16

07 Sep '16

#48853: curl-ca-bundle @7.44_0: error while fetching ------------------------+---------------------------- Reporter: dstrubbe@… | Owner: ryandesign@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: curl-ca-bundle ------------------------+---------------------------- The installation was successful, but this error came up in the process: "Error: No defined site for tag: certdata, using master_sites" {{{ ---> Computing dependencies for curl-ca-bundle ---> Fetching archive for curl-ca-bundle ---> Attempting to fetch curl-ca-bundle-7.44.0_0.darwin_10.noarch.tbz2 from http://packages.macports.org/curl-ca-bundle ---> Attempting to fetch curl-ca-bundle-7.44.0_0.darwin_10.noarch.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/curl- ca-bundle ---> Attempting to fetch curl-ca-bundle-7.44.0_0.darwin_10.noarch.tbz2 from http://nue.de.packages.macports.org/macports/packages/curl-ca-bundle ---> Fetching distfiles for curl-ca-bundle Error: No defined site for tag: certdata, using master_sites ---> Attempting to fetch curl-7.44.0.tar.bz2 from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/curl ---> Attempting to fetch certdata-2f1a37cb43ac.tar.bz2 from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/curl ---> Verifying checksums for curl-ca-bundle ---> Extracting curl-ca-bundle ---> Applying patches to curl-ca-bundle ---> Configuring curl-ca-bundle ---> Building curl-ca-bundle ---> Staging curl-ca-bundle into destroot ---> Installing curl-ca-bundle @7.44.0_0 ---> Cleaning curl-ca-bundle ---> Deactivating curl-ca-bundle @7.42.1_0 ---> Cleaning curl-ca-bundle ---> Activating curl-ca-bundle @7.44.0_0 ---> Cleaning curl-ca-bundle }}} -- Ticket URL: <https://trac.macports.org/ticket/48853> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #50324: ldns build fails - missing man pages?
by MacPorts 07 Sep '16

07 Sep '16

#50324: ldns build fails - missing man pages? --------------------+-------------------------------- Reporter: me@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: ldns --------------------+-------------------------------- After upgrading to El Capitan, while restoring previous ports, ldns does not build. As near as I can tell, the relevant log messages are these: {{{ :info:destroot ./install-sh: doc/man/man3/* does not exist. :info:destroot gnumake: *** [install-manpages] Error 1 }}} In case it's related, this is after applying the workaround for #50040. -- Ticket URL: <https://trac.macports.org/ticket/50324> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #50032: libsdl @1.2.15_3 Make failure
by MacPorts 07 Sep '16

07 Sep '16

#50032: libsdl @1.2.15_3 Make failure ----------------------------+-------------------------------- Reporter: 4625khz.mail@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: tiger libsdl | Port: libsdl ----------------------------+-------------------------------- Hello! Building libsdl on Mac OS X Tiger 10.4.11 using apple-gcc42 (from macports too) fails with error: {{{ /System/Library/Frameworks/CoreServices.framework/Frameworks/CarbonCore.framework/Headers/MachineExceptions.h:115: error: expected specifier-qualifier-list before 'vector' }}} Full log of the debug output (compilation and make) attached. -- Ticket URL: <https://trac.macports.org/ticket/50032> MacPorts <https://www.macports.org/> Ports system for OS X

1 12

[MacPorts] #47659: lz4 @r124: universal variant fails
by MacPorts 03 Sep '16

03 Sep '16

#47659: lz4 @r124: universal variant fails --------------------------+---------------------- Reporter: ryandesign@… | Owner: mfeiri@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.99 Keywords: | Port: lz4 --------------------------+---------------------- {{{ ar: liblz4.a is a fat file (use libtool(1) or lipo(1) and ar(1) on it) ar: liblz4.a: Inappropriate file type or format make: *** [liblz4] Error 1 }}} -- Ticket URL: <https://trac.macports.org/ticket/47659> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #46800: gnome-terminal is not working
by MacPorts 02 Sep '16

02 Sep '16

#46800: gnome-terminal is not working ----------------------------+-------------------------------- Reporter: lightoml@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: gnome-terminal | Port: ----------------------------+-------------------------------- I installed gnome-termianl and ran it. But I have below error message. Could you solve the problem? Thanks! Error constructing proxy for org.gnome.Terminal:/org/gnome/Terminal/Factory0: Error calling StartServiceByName for org.gnome.Terminal: GDBus.Error:org.freedesktop.DBus.Error.Spawn.ChildExited: Process org.gnome.Terminal exited with status 8 -- Ticket URL: <https://trac.macports.org/ticket/46800> MacPorts <https://www.macports.org/> Ports system for OS X

1 10

[MacPorts] #50776: PortGroup/"base" extension suggestion : locale_select
by MacPorts 02 Sep '16

02 Sep '16

#50776: PortGroup/"base" extension suggestion : locale_select -------------------------+-------------------------------- Reporter: rjvbertin@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: base | Version: Keywords: | Port: -------------------------+-------------------------------- As suggested elsewhere (https://trac.macports.org/ticket/49051#comment:17) I propose a new PortGroup which might inspire an extension of "base". The aim is to allow users who don't like or cannot afford to waste disk space (on things they don't use) to reduce the number of translations installed by ports. A good example is port:VLC : this one consists for over 50% of translations, most of which will never be used by the (vast) majority of users. That may be "only" around 37Mb, which is why I've hesitated a bit to make this proposal. Still, leaving only the en_GB, fr and nl translations that overhead shrinks to about 1.2Mb . The principle of this PortGroup is simple: if adds a variant (tentatively called `langselect`) which adds a post-destroot block that prunes translations from ${destroot}${prefix}/share/locale, leaving only translations the user is interested in. This happens only when the variant is active, of course, but also requires the user to list the translation(s) s/he is interested in. Those desired translations are read from a list assignment to a variable called`keep_languages` in ${prefix}/etc/macports/locales.tcl. A locales.conf file would be nicer but I didn't want to spend too much time figuring out how to write a parser for that kind of file. Currently the code only removes translations from the share/locale directory, but one could extend the principle to prune unwanted .lproj directories too. -- Ticket URL: <https://trac.macports.org/ticket/50776> MacPorts <https://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #48647: `port select gcc` sets default C++ compiler
by MacPorts 02 Sep '16

02 Sep '16

#48647: `port select gcc` sets default C++ compiler --------------------+-------------------------------- Reporter: john@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: gcc_select --------------------+-------------------------------- Running (say) `port select gcc mp gcc5` creates `/opt/local/bin/cpp` and `c++` symlinks to the specified version of GCC. This is not the behaviour I expected. It seems like this command should set the default version invoked with `g++`, but not "promote" GCC to be the default compiler. That is, it would create symlinks for `g++`, `gcc` etc, but not generic names like `c++`. This would be consistent with (for example) `clang_select`, which creates a `clang++` symlink but not `c++`. -- Ticket URL: <https://trac.macports.org/ticket/48647> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #50069: py27-gsl fails to build
by MacPorts 01 Sep '16

01 Sep '16

#50069: py27-gsl fails to build --------------------+-------------------------------- Reporter: glen@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: py27-gsl --------------------+-------------------------------- OSX 10.11.2, Macbook pro (early 2015). Logfile attached. -- Ticket URL: <https://trac.macports.org/ticket/50069> MacPorts <https://www.macports.org/> Ports system for OS X

1 11

[MacPorts] #47998: [NEW] boot2docker
by MacPorts 01 Sep '16

01 Sep '16

#47998: [NEW] boot2docker -----------------------------+-------------------------------- Reporter: ajdudman@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: Linux container | Port: boot2docker -----------------------------+-------------------------------- Boot2docker is a command-line interface to docker. This tool downloads the boot2docker ISO image, creates a VirtualBox virtual machine, sets up two networks for that virtual machine and then provides the user a simple way to login via SSH. This port works with the docker port in ticket #43260. Please keep the versions matched. Since the build process calls git through go -d, might as well fetch with git as well. I based this Portfile on the homebrew formula. -- Ticket URL: <https://trac.macports.org/ticket/47998> MacPorts <https://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #50075: zeroc-ice35 Build failure on El Capitan
by MacPorts 30 Aug '16

30 Aug '16

#50075: zeroc-ice35 Build failure on El Capitan -----------------------------+-------------------------------- Reporter: patrick.sizun@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: zeroc-ice35 -----------------------------+-------------------------------- The zeroc-ice35 port fails to build on OS X 10.11.2 (see attached main.log). The solution might be to create a port zeroc-ice36. -- Ticket URL: <https://trac.macports.org/ticket/50075> MacPorts <https://www.macports.org/> Ports system for OS X

1 3