May 2016 - macports-tickets - lists.macosforge.org

[MacPorts] #51402: Problem installing kmymoney on El Capitan
by MacPorts 16 May '16

16 May '16

#51402: Problem installing kmymoney on El Capitan -----------------------+-------------------------------- Reporter: wlwood3@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: -----------------------+-------------------------------- I am trying to get kmymoney into a new installation of El Capitan on a MacBook Pro. Last fall, I was successful in getting this to work on a different new El Capitan installation on an iMac (and on everything else I've run it on--Linux, Windows and Mac--going back a number of years). Here's the problem I'm running into: I installed MacPorts and everything went fine. I then typed "sudo port install kmymoney4" and it told me it was computing dependencies. It listed all the dependencies and went for one (the first time out, this was gmp). It then listed a bunch of repositories where it looked and ended up with an error saying that archivefetch failed to find gmp, bringing the whole process to a halt. I tried this a few times, with the same result, so I thought I'd try just installing gmp individually. I typed "sudo port install gmp" and it worked perfectly. So then I tried kmymoney4 again, and ran into exactly the same problem with the curl-ca-bundle package. So I installed that separately, and it worked. I followed the same process (failed kmymoney4 install, then successful individual package install) with expat and libiconv, but kmymoney4 just keeps hanging on the next package. At some point, I got an error saying that my DNS server was reporting that some sites that don't exist actually do, and it suggested that I change my DNS server (this makes sense--my cable provider "helpfully" turns bad web addresses into a search that it takes command of). So I changed my DNS server to Google (8.8.8.8 and 8.8.4.4) and I no longer get that error. So it's clear that these packages are in the repositories, because they will install by themselves. But I can't seem to get them to install as part of kmymoney4. I'm hoping this is something dumb I'm doing on my end that someone much smarter than me will quickly realize. Any thoughts? -- Ticket URL: <https://trac.macports.org/ticket/51402> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #47490: mogenerator: version upgrade to 1.2.8
by MacPorts 16 May '16

16 May '16

#47490: mogenerator: version upgrade to 1.2.8 -----------------------------+-------------------------------- Reporter: rsanchez.saez@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: mogenerator -----------------------------+-------------------------------- [NEW] --v2 argument. I wanted to enable ARC by default, but decided to take it a step further (while not breaking existing scripts). The new --v2 argument is basically semantic versioning for tool arguments. So now instead of this: mogenerator --model MyDataModel.xcdatamodeld \ --template-var arc=true \ --template-var literals=true \ --template-var modules=true You can write this: mogenerator --v2 --model MyDataModel.xcdatamodeld Internally these invocations are equivalent, but new scripts and manual invocations should use the --v2 variant. I recommend putting the --v2 in front of the rest of the arguments to call attention to the versioned context of the following arguments. This mechanism should allow mogenerator to continue to supply sensible defaults into the future as well. Perhaps --v3 will generate Swift by default. Speaking of which… [NEW] Experimental Swift code generation. Unfortunately basic Core Data functionality (to-one relationships) is broken on 10.9, but we can still try writing theoretically-correct Swift code. Perhaps a future version of mogenerator will supply the needed work-around code for you. (Alexsander Akers, afrederick1, Piet Brauer, rentzsch, Chris Weber, Markus Chmelar, Brent Royal-Gordon) [NEW] Ordered relationships actually work. OMG. I have them working in a new separate OS X test app, even though mogenerator's test dir fails. I still haven't figured out why, but I'm not holding this back. (Daniel Tull, Joshua Greene, Dave Wood, Jonathan del Strother) [NEW] Custom scalar types. Specify attributeValueScalarType for the name of the property's custom type and additionalHeaderFileName if you need to bring in an additional header file for compilation. With this, mogenerator supports C-style and JREnum-style enums. (Quentin ARNAULT) [NEW] Remove unnecessary empty lines in the generated files. (Stephan Michels) [NEW] Ability to forward-declare @protocols for i.e. transformable types. Specify them via a comma delimited string in the entity's user info under the attributeTransformableProtocols key. (Renaud Tircher) [NEW] Generate *UserInfo key/value pairs as const structs. (Jeremy Foo, rentzsch) [NEW] --template-var literals which, when enabled, generates Obj-C literals. (Brandon Williams, Thomas van der Heijden, rentzsch) [NEW] Specify --template-var modules=true option to avoid treating #import as an import of module 'CoreData' [-Wauto-import]" warning. (Daniel Tull) [NEW] Unsigned integers are generated when a property's minimum is set to 0 in the Xcode modeler. (Dan Pourhadi) [NEW] Add support for setting command-line options via a JSON config file. (Simon Whitaker) [NEW] Add CONTRIBUTING.md file. It's now even easier to contribute to mogenerator :) (rentzsch) [NEW] Add MIT LICENSE file to make it clear templates are under the same license. (rentzsch) [CHANGE] Suppress generation of -setPrimativeType: method. issue 16. (rentzsch) [CHANGE] Add a warning when skipping an attribute named 'type'. (Simon Whitaker) [CHANGE] Add explicit atomic to sooth -Weverything. (Daniel Tull) [CHANGE] iOS 8 changes objectID from a getter into a property, resulting in a warning. Templates updated to match. (Ryan Johnson) [FIX] Support newly-created models when --model=*.xcdatamodeld. issue 137. (Sergey) [FIX] Minor warning fix, 64->32 truncation, format strings. (Sean M) [FIX] Machine headers always #imports their superentity if present. (David Aspinall) [FIX] Fetch requests whose predicate LHS specifies a relationship. issue 15. (rentzsch) [FIX] Don't emit empty *UserInfo structs. (Jeremy Foo 1 2) [FIX] Don't emit empty *Attributes, *Relationships, and *FetchedProperties structs. (Daniel Tull) [FIX] MOIDs subclass their superentity (instead of just always inheriting from NSManagedObject). (Daniel Tull) [FIX] Don't touch aggregate include files if the content didn't change. (Stephan Michels) [FIX] Don't attempt to #import "NSManagedObject.h" even in the face of weird (corrupted?) model files. issue 42. (rentzsch) [TEST] Escape spaces in mogenerator build path. (Daniel Tull) -- Ticket URL: <https://trac.macports.org/ticket/47490> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #49104: star install fails on El Capitan
by MacPorts 15 May '16

15 May '16

#49104: star install fails on El Capitan -----------------------+-------------------------------- Reporter: rlhamil@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: -----------------------+-------------------------------- :info:destroot ==> MAKING DIRECTORY "/etc/default" :info:destroot mkdir: /etc/default: Operation not permitted Even if /etc/default is created and made mode 777, failures creating files under it still occur. This might be a side-effect of SIP controls or settings, but happens even with it turned off, although one can create the directory and files as root. Log attached. -- Ticket URL: <https://trac.macports.org/ticket/49104> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #49363: New port: wandio
by MacPorts 15 May '16

15 May '16

#49363: New port: wandio ------------------------+-------------------------------- Reporter: alistair@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: wandio ------------------------+-------------------------------- C library for compressed file I/O Libwandio is a software library written in C that provides an API for transparently reading from and writing to files using a variety of supported compression methods. Provided pthreads are available, I/O performance will be improved by doing any compression and/or decompression using a separate thread. WWW: http://research.wand.net.nz/software/libwandio.php -- Ticket URL: <https://trac.macports.org/ticket/49363> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #51404: New port, beancount
by MacPorts 15 May '16

15 May '16

#51404: New port, beancount -------------------------------+-------------------------------- Reporter: david.e.pi.3.14@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: -------------------------------+-------------------------------- I prepared a Portfile for beancount, from the [http://furius.ca/beancount website]: > A double-entry bookkeeping computer language that lets you define financial transaction records in a text file, read them in memory, generate a variety of reports from them, and provides a web interface. I would be happy if this port could be included as in MacPorts. -- Ticket URL: <https://trac.macports.org/ticket/51404> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #49437: py-gitpython: update homepage
by MacPorts 15 May '16

15 May '16

#49437: py-gitpython: update homepage --------------------------+-------------------------- Reporter: ryandesign@… | Owner: landonf@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: py-gitpython --------------------------+-------------------------- The py-gitpython portfile's homepage is currently set to http://gitorious.org/projects/git-python/ . The gitorious service has shut down. gitpython appears to now be available at https://github.com /gitpython-developers/GitPython . -- Ticket URL: <https://trac.macports.org/ticket/49437> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

Re: [MacPorts] #38810: Build of xfig fails in 32 bit Macports environment
by MacPorts 15 May '16

15 May '16

#38810: Build of xfig fails in 32 bit Macports environment -----------------------+-------------------------------- Reporter: ojohns@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.1.3 Resolution: fixed | Keywords: 32bit Port: xfig | -----------------------+-------------------------------- Changes (by khindenburg@…): * status: new => closed * resolution: => fixed Comment: If you're still interested, try updating to lastest port - reopen if you still have issues -- Ticket URL: <https://trac.macports.org/ticket/38810#comment:7> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #49993: xfig unable to save
by MacPorts 15 May '16

15 May '16

#49993: xfig unable to save -----------------------------+-------------------------------- Reporter: michel.agoyan@… | Owner: macports-tickets@… Type: defect | Status: new Priority: High | Milestone: Component: ports | Version: 2.3.4 Keywords: unable to save | Port: xfig -----------------------------+-------------------------------- Hi, hereafter my configuration : Os X El Capitan 10.11.2 xfig @3.2.5b_8 MacPorts base version 2.3.4 When I try to save a file the pop-up windows "areas" appears without the focus and I'm not able to get the focus and to enter the file name. I have tried to uninstall the package and install it again without success. The -debug option doesn't report anything regards Michel -- Ticket URL: <https://trac.macports.org/ticket/49993> MacPorts <https://www.macports.org/> Ports system for OS X

1 4

[MacPorts] #49444: xfig textfields do not accept text
by MacPorts 15 May '16

15 May '16

#49444: xfig textfields do not accept text -------------------------------------+-------------------------------- Reporter: MacPorts@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: xfig textfield readonly | Port: xfig @3.2.5b_8 -------------------------------------+-------------------------------- Everything seems to work fine in xfig (all drawing features and GUI elements) EXCEPT for textfields. I know to have my mouse cursor in the textfield and type. Clicking first doesn't help. I discovered this first trying to type a filename for SaveAs, and later when trying to Edit a Text element to change its text. Note that it DOES work to type text on the drawing using the Text mode tool. It fails in the Edit inspector which uses a textfield to change the text. It's as if the textfield GUI element is in readonly mode everywhere it is used. -- Ticket URL: <https://trac.macports.org/ticket/49444> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

Re: [MacPorts] #18472: xfig - cannot type in file open/save fields
by MacPorts 15 May '16

15 May '16

#18472: xfig - cannot type in file open/save fields ----------------------------+-------------------------------- Reporter: Mike.Willis@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: xfig | ----------------------------+-------------------------------- Changes (by khindenburg@…): * status: new => closed * resolution: => fixed Comment: I just updated to latest version - please try again - it appears to work here -- Ticket URL: <https://trac.macports.org/ticket/18472#comment:7> MacPorts <https://www.macports.org/> Ports system for OS X

1 0