May 2016 - macports-tickets - lists.macosforge.org

[MacPorts] #51290: rebar3 Portfile submission
by MacPorts 02 May '16

02 May '16

#51290: rebar3 Portfile submission --------------------------+-------------------------------- Reporter: jrjsmrtn@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: erlang devel | Port: rebar3 --------------------------+-------------------------------- -- Ticket URL: <https://trac.macports.org/ticket/51290> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

Re: [MacPorts] #44698: py-gwpy @0.1a10 new port submission
by MacPorts 02 May '16

02 May '16

#44698: py-gwpy @0.1a10 new port submission -------------------------------+-------------------------------- Reporter: duncanmmacleod@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.1 Resolution: | Keywords: Port: py-gwpy | -------------------------------+-------------------------------- Comment (by mf2k@…): Replying to [comment:12 duncanmmacleod@…]: > I don't have a trac email, how can I get one? It's the same one you are using to post your Portfile and comment. Your duncanmmacleod gmail. -- Ticket URL: <https://trac.macports.org/ticket/44698#comment:13> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

Re: [MacPorts] #44698: py-gwpy @0.1a10 new port submission
by MacPorts 02 May '16

02 May '16

#44698: py-gwpy @0.1a10 new port submission -------------------------------+-------------------------------- Reporter: duncanmmacleod@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.1 Resolution: | Keywords: Port: py-gwpy | -------------------------------+-------------------------------- Comment (by duncanmmacleod@…): Replying to [comment:11 mf2k@…]: > Some comments: > 1. Remove all the excessive blank and dashed comment lines. No other Portfile does that. In fact all of the comments can be removed except for the first 2 lines. Done > 1. Remove the Copyright or else we cannot modify this port without your permission. Again, this is not how we do things in Portfiles. Done > 1. The {{{hdf5}}} variant cannot depend on "py-h5py" but must choose a specific version. Move the variant into the subports block and use syntax like you did for {{{port:py${python.version}-scipy}}}. Done > 1. Your {{{maintainers}}} email should match your Trac email or else any future patches you submit are likely to get held up. I don't have a trac email, how can I get one? > 1. As asked previously, can {{{openmaintainer}}} be added? Done. -- Ticket URL: <https://trac.macports.org/ticket/44698#comment:12> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

Re: [MacPorts] #44698: py-gwpy @0.1a10 new port submission
by MacPorts 02 May '16

02 May '16

#44698: py-gwpy @0.1a10 new port submission -------------------------------+-------------------------------- Reporter: duncanmmacleod@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.1 Resolution: | Keywords: Port: py-gwpy | -------------------------------+-------------------------------- Comment (by mf2k@…): Some comments: 1. Remove all the excessive blank and dashed comment lines. No other Portfile does that. In fact all of the comments can be removed except for the first 2 lines. 1. Remove the Copyright or else we cannot modify this port without your permission. Again, this is not how we do things in Portfiles. 1. The {{{hdf5}}} variant cannot depend on "py-h5py" but must choose a specific version. Move the variant into the subports block and use syntax like you did for {{{port:py${python.version}-scipy}}}. 1. Your {{{maintainers}}} email should match your Trac email or else any future patches you submit are likely to get held up. 1. As asked previously, can {{{openmaintainer}}} be added? -- Ticket URL: <https://trac.macports.org/ticket/44698#comment:11> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

Re: [MacPorts] #44698: py-gwpy @0.1a10 new port submission
by MacPorts 02 May '16

02 May '16

#44698: py-gwpy @0.1a10 new port submission -------------------------------+-------------------------------- Reporter: duncanmmacleod@… | Owner: macports-tickets@… Type: submission | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.1 Resolution: | Keywords: Port: py-gwpy | -------------------------------+-------------------------------- Comment (by duncanmmacleod@…): Replying to [comment:7 larryv@…]: > Replying to [comment:6 ram@…]: > > I believe the MacPorts version comparison algorithm will consider > > 0.1a10 to be newer than 0.1 so using that scheme may cause problems. > > The `epoch` could easily be incremented when the suffix is removed. The focus should be on making it clear which version of the software we are providing; if “0.1a10” is the upstream version number, then that’s the number we should use. I've updated the attached Portfile to represent the 0.1 version of GWpy, which was just uploaded. Can @ram, or others please take a second look at this submission? -- Ticket URL: <https://trac.macports.org/ticket/44698#comment:10> MacPorts <https://www.macports.org/> Ports system for OS X

1 0

[MacPorts] #51282: py-chardet: add py35 support
by MacPorts 02 May '16

02 May '16

#51282: py-chardet: add py35 support -------------------------------+-------------------------------- Reporter: david.e.pi.3.14@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: -------------------------------+-------------------------------- Please consider applying the attached path to add py35 support for chardet. -- Ticket URL: <https://trac.macports.org/ticket/51282> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #51293: scantailor @0.9.11.1 Outdated references to Sourceforge
by MacPorts 02 May '16

02 May '16

#51293: scantailor @0.9.11.1 Outdated references to Sourceforge ------------------------+-------------------------------- Reporter: tfmorris@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: scantailor ------------------------+-------------------------------- The portfile contains a number of references to Sourceforge, but the project is now hosted on Github. 16 homepage http://${name}.sourceforge.net/ 31 master_sites sourceforge:project/scantailor/scantailor/${version} 65 livecheck.type sourceforge Github: https://github.com/scantailor/scantailor Main site: http://scantailor.org/ -- Ticket URL: <https://trac.macports.org/ticket/51293> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #46888: scantailor @0.9.11.1_5 build fails with boost @1.57.0_0
by MacPorts 02 May '16

02 May '16

#46888: scantailor @0.9.11.1_5 build fails with boost @1.57.0_0 ------------------------------+-------------------------------- Reporter: Martin.vGagern@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: boost | Port: scantailor ------------------------------+-------------------------------- scantailor @0.9.11.1_5 fails to build on my system with boost @1.57.0_0. The build log is pretty long, but the first error is rather early in that log (due to parallel compilation): {{{ :info:build /opt/local/bin/moc @/opt/local/var/macports/build/_opt_local_var_macpo rts_sources_rsync.macports.org_release_tarballs_ports_graphics_scantailor/scantail or/work/scantailor-0.9.11.1/BasicImageView.h.moc_parameters :info:build opt/local/include/boost/type_traits/detail/has_binary_operator.hp:50: Parse error at "BOOST_JOIN" :info:build make[2]: *** [zones/ZoneContextMenuInteraction.h.moc] Error 1 }}} Activating boost @1.56.0_2 instead made things work. -- Ticket URL: <https://trac.macports.org/ticket/46888> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #51274: kst @2.0.8_1: build bot failure under Snow Leopard
by MacPorts 02 May '16

02 May '16

#51274: kst @2.0.8_1: build bot failure under Snow Leopard --------------------+--------------------- Reporter: mps@… | Owner: nicos@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: kst --------------------+--------------------- This morning I rev bumped a number of ports, including kst, due to a version upgrade of matio. Only, under Snow Leopard the build, actually cmake, failed: {{{ CMake Error at CMakeLists.txt:64 (project): The CMAKE_CXX_COMPILER: clang++ is not a full path and was not found in the PATH. Tell CMake where to find the compiler by setting either the environment variable "CXX" or the CMake cache entry CMAKE_CXX_COMPILER to the full path to the compiler, or to the compiler name if it is in the PATH. }}} -- Ticket URL: <https://trac.macports.org/ticket/51274> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

Re: [MacPorts] #16792: Request for new port: rkhunter
by MacPorts 02 May '16

02 May '16

#16792: Request for new port: rkhunter -------------------------+-------------------------------- Reporter: ralph@… | Owner: macports-tickets@… Type: submission | Status: closed Priority: Normal | Milestone: Component: ports | Version: Resolution: fixed | Keywords: Port: rkhunter | -------------------------+-------------------------------- Changes (by mps@…): * status: new => closed * resolution: => fixed Comment: Committed in r148268. -- Ticket URL: <https://trac.macports.org/ticket/16792#comment:10> MacPorts <https://www.macports.org/> Ports system for OS X

1 0