June 2016 - macports-tickets - lists.macosforge.org

[MacPorts] #51435: orfeotoolbox new release
by MacPorts 29 Jul '16

29 Jul '16

#51435: orfeotoolbox new release -------------------------+-------------------------------- Reporter: s.t.smith@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: orfeotoolbox -------------------------+-------------------------------- Dear OTB maintainer, I'm trying to install orfeotoolbox from macports with no success. I've tried modifying the portfile so that it installs 5.4.0, but I get the following.. Firstly in debug mode it is stated that "No Jpeg2000 driver found (compatible drivers are : OpenJpeg, Kakadu, ECW).", though I have OpenJPEG installed and have temporarily deactivated openjpeg15.[[BR]] It then goes on to the following error before stoping {{{ -- GDAL doesn't have HDF5 drivers. (HDF5 tests will be deactivated) -- Check if Gdal qualifies for Orfeo ToolBox -- yes. -- Version : 2.0.2 -- Drivers for JPEG 2000 : CMake Warning at CMake/FindOpenThreads.cmake:99 (message): OpenThreads/Version not found ! Call Stack (most recent call first): Modules/ThirdParty/OpenThreads/otb-module-init.cmake:1 (find_package) CMake/OTBModuleEnablement.cmake:356 (include) CMakeLists.txt:262 (include) }}} [[BR]] I, therefore, am very keen to know when a new macport for orfeotoolbox 5.4 is likely to be available, or whether their is a known issue/work around the error I'm getting in my portfile. Many thanks. Stefan -- Ticket URL: <https://trac.macports.org/ticket/51435> MacPorts <https://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #45918: Update orfeotoolbox port to 4.2.1 version
by MacPorts 29 Jul '16

29 Jul '16

#45918: Update orfeotoolbox port to 4.2.1 version --------------------------------+-------------------------------- Reporter: mickael.savinaud@… | Owner: macports-tickets@… Type: update | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.2 Keywords: | Port: --------------------------------+-------------------------------- A new version of OTB and its application is available 4.2.1. Could you please update the port to this new version. -- Ticket URL: <https://trac.macports.org/ticket/45918> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #47523: orfeotoolbox @4.0.0 +python27 Configure failure: command execution failed
by MacPorts 29 Jul '16

29 Jul '16

#47523: orfeotoolbox @4.0.0 +python27 Configure failure: command execution failed -------------------------+-------------------------------- Reporter: dgaleazzo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: -------------------------+-------------------------------- {{{ macbook:~ daniel$ sudo port install orfeotoolbox +python27 ---> Computing dependencies for orfeotoolbox ---> Configuring orfeotoolbox Error: org.macports.configure for port orfeotoolbox returned: configure failure: command execution failed Please see the log file for port orfeotoolbox for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_orfeotoolbox/orfeotoolbox/main.log To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port orfeotoolbox failed }}} -- Ticket URL: <https://trac.macports.org/ticket/47523> MacPorts <https://www.macports.org/> Ports system for OS X

1 3

[MacPorts] #51477: rakudo @2016.05: failed tests
by MacPorts 29 Jul '16

29 Jul '16

#51477: rakudo @2016.05: failed tests ---------------------+------------------------------- Reporter: mojca@… | Owner: will@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: | Port: MoarVM nqp rakudo ---------------------+------------------------------- Running {{{ sudo port -v test rakudo }}} for version 2016.05 fails with {{{ t/01-sanity/21-try.t ..................... ok t/01-sanity/53-transpose.t ............... Dubious, test returned 1 (wstat 256, 0x100) No subtests run t/01-sanity/55-use-trace.t ............... Dubious, test returned 1 (wstat 256, 0x100) No subtests run t/01-sanity/99-test-basic.t .............. Dubious, test returned 1 (wstat 256, 0x100) No subtests run t/04-nativecall/01-argless.t ............. Dubious, test returned 1 (wstat 256, 0x100) No subtests run t/04-nativecall/02-simple-args.t ......... Dubious, test returned 1 (wstat 256, 0x100) No subtests run ... t/04-nativecall/18-routine-sig-sanity.t (Wstat: 256 Tests: 0 Failed: 0) Non-zero exit status: 1 Parse errors: No plan found in TAP output t/04-nativecall/19-function-pointers.t (Wstat: 256 Tests: 0 Failed: 0) Non-zero exit status: 1 Parse errors: No plan found in TAP output Files=45, Tests=199, 37 wallclock secs ( 0.19 usr 0.18 sys + 20.43 cusr 4.19 csys = 24.99 CPU) Result: FAIL }}} So I didn't upgrade any of the perl6-related ports. -- Ticket URL: <https://trac.macports.org/ticket/51477> MacPorts <https://www.macports.org/> Ports system for OS X

1 1

[MacPorts] #51149: QGIS not install
by MacPorts 28 Jul '16

28 Jul '16

#51149: QGIS not install -------------------------------+-------------------------------- Reporter: lorenzo.moretti@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: -------------------------------+-------------------------------- QGIS 2.14 does non install on OS X 10.11.x These are the last rows of log file... ....... :info:build /usr/bin/clang++ -pipe -Os -stdlib=libc++ -DSPATIALITE_VERSION_GE_4_0_0 -DSPATIALITE_VERSION_G_4_1_1 -DSPATIALITE_HAS_INIT_EX -std=c++11 -Wno-error=c++11-narrowing -Wall -Wextra -Wno-long-long -Wformat-security -Wno-strict-aliasing -Wno-return- type-c-linkage -Wno-overloaded-virtual -Qunused-arguments -DNDEBUG -arch x86_64 -mmacosx-version-min=10.11 -Wl,-search_paths_first -Wl,-headerpad_max_install_names -L/opt/local/lib -Wl,-headerpad_max_install_names -Qunused-arguments -F/Library/Frameworks CMakeFiles/qgis_maplayerstylemanager.dir/testqgsmaplayerstylemanager.cpp.o CMakeFiles/qgis_maplayerstylemanager.dir/qgscompositionchecker.cpp.o CMakeFiles/qgis_maplayerstylemanager.dir/qgis_maplayerstylemanager_automoc.cpp.o -o ../../../output/bin/qgis_maplayerstylemanager -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build/src/core -L/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build/src/gui /opt/local/libexec/qt4/lib/libQtXml.dylib /opt/local/libexec/qt4/lib/libQtCore.dylib /opt/local/libexec/qt4/lib/libQtSvg.dylib /opt/local/libexec/qt4/lib/libQtTest.dylib /opt/local/lib/libproj.dylib /opt/local/lib/libgeos_c.dylib /opt/local/lib/libgdal.dylib ../../../output/lib/qgis_core.framework/Versions/2.14/qgis_core -framework CoreFoundation -framework IOKit /opt/local/libexec/qt4/lib/libQtXml.dylib /opt/local/libexec/qt4/lib/libQtCore.dylib /opt/local/libexec/qt4/lib/libQtGui.dylib /opt/local/libexec/qt4/lib/libQtNetwork.dylib /opt/local/libexec/qt4/lib/libQtSvg.dylib /opt/local/libexec/qt4/lib/libQtWebKit.dylib /opt/local/libexec/qt4/lib/libQtSql.dylib /opt/local/lib/libqca.dylib /opt/local/lib/libproj.dylib /opt/local/lib/libgeos_c.dylib /opt/local/lib/libgdal.dylib /opt/local/lib/libspatialindex.dylib /opt/local/lib/libexpat.dylib /opt/local/lib/libsqlite3.dylib /opt/local/lib/libspatialite.dylib -Wl,-rpath,/opt/local/lib :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build' :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build' :info:build [ 55%] Built target qgis_maplayertest :info:build [ 55%] Built target qgis_symbolv2test :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build' :info:build [ 55%] Built target qgis_maplayerstylemanager :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build' :info:build make: *** [all] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/work/qgis-2.14.0/build" && /usr/bin/make -j4 -w all VERBOSE=ON :info:build Exit code: 2 :error:build org.macports.build for port qgis returned: command execution failed :debug:build Error code: CHILDSTATUS 88030 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "portbuild::build_main org.macports.build" ("eval" body line 1) invoked from within "eval $procedure $targetname" :info:build Warning: targets not executed for qgis: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port qgis for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_gis_qgis/qgis/main.log -- Ticket URL: <https://trac.macports.org/ticket/51149> MacPorts <https://www.macports.org/> Ports system for OS X

1 17

[MacPorts] #48523: saga does not compile after gdal port uprade to 2.0
by MacPorts 28 Jul '16

28 Jul '16

#48523: saga does not compile after gdal port uprade to 2.0 -------------------------------+-------------------------------- Reporter: andy.aschwanden@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: saga -------------------------------+-------------------------------- Hi, Saga GIS does not compile anymore since gdal got bumped to version 2.0. See attached log. Thanks, Andy -- Ticket URL: <https://trac.macports.org/ticket/48523> MacPorts <https://www.macports.org/> Ports system for OS X

1 7

[MacPorts] #46641: ogrinfo fails giving out the availabe formats and misses wfs format
by MacPorts 28 Jul '16

28 Jul '16

#46641: ogrinfo fails giving out the availabe formats and misses wfs format -------------------------------+-------------------------------- Reporter: c.strobl@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: ogrinfo --formats | Port: gdal -------------------------------+-------------------------------- ogrinfo --formats Usage: ogrinfo [--help-general] [-ro] [-q] [-where restricted_where] [-spat xmin ymin xmax ymax] [-geomfield field] [-fid fid] [-sql statement] [-dialect sql_dialect] [-al] [-so] [-fields={YES/NO}] [-geom={YES/NO/SUMMARY}][--formats] datasource_name [layer [layer ...]] FAILURE: Unknown option name '--formats' also the WFS format is missing -- Ticket URL: <https://trac.macports.org/ticket/46641> MacPorts <https://www.macports.org/> Ports system for OS X

1 2

[MacPorts] #46806: gdal 1.11.1_3 vs. poppler 0.31.0
by MacPorts 28 Jul '16

28 Jul '16

#46806: gdal 1.11.1_3 vs. poppler 0.31.0 ----------------------------+-------------------------------- Reporter: mschamschula@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: gdal ----------------------------+-------------------------------- gdal @1.11.1_3 +poppler (in my case gdal @1.11.1_3+curl+expat+geos+hdf4+hdf5+jasper+lzma+mysql5+netcdf+poppler+sqlite3) fails to build against poppler @0.31.0_0. See attached log file. -- Ticket URL: <https://trac.macports.org/ticket/46806> MacPorts <https://www.macports.org/> Ports system for OS X

1 5

[MacPorts] #46759: qgis library paths should consider additional qt4-mac plugins installation
by MacPorts 28 Jul '16

28 Jul '16

#46759: qgis library paths should consider additional qt4-mac plugins installation ------------------------+-------------------------------- Reporter: geosanak@… | Owner: macports-tickets@… Type: request | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: qgis | Port: qgis ------------------------+-------------------------------- When I wanted to use "qt4-mac-sqlite3-plugin" ('QSQLITE' driver) in QGIS Python console,[[BR]] the following was necessary. {{{ sudo port install qt4-mac-sqlite3-plugin cd /Applications/MacPorts/QGIS.app/Contents/PlugIns sudo mkdir sqldrivers cd sqldrivers/ sudo cp /opt/local/share/qt4/plugins/sqldrivers/libqsqlite.dylib ./ }}} Because library paths were different between Python and QGIS.[[BR]] Python: {{{ $ python >>> from PyQt4.QtCore import QCoreApplication >>> list(QCoreApplication.libraryPaths()) [PyQt4.QtCore.QString(u'/opt/local/share/qt4/plugins')] }}} QGIS (Python Console): {{{ >>> from PyQt4.QtCore import QCoreApplication >>> QCoreApplication.libraryPaths() [u'/Applications/MacPorts/QGIS.app/Contents/PlugIns', u'/Applications/MacPorts/QGIS.app/Contents/PlugIns/qgis'] }}} I think that current '/Applications/MacPorts/QGIS.app/Contents/Plugins' can be changed to '/opt/local/share/qt4/plugins' and duplicate plugins (in codecs, iconengines and imageformats folders) can be removed. -- Ticket URL: <https://trac.macports.org/ticket/46759> MacPorts <https://www.macports.org/> Ports system for OS X

1 6

[MacPorts] #49308: qgis: 139229 - request to set gdal dependency to +postgresql94 variant
by MacPorts 28 Jul '16

28 Jul '16

#49308: qgis: 139229 - request to set gdal dependency to +postgresql94 variant ----------------------------+-------------------------------- Reporter: garethsimons@… | Owner: macports-tickets@… Type: enhancement | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.4 Keywords: | Port: qgis / 139229 ----------------------------+-------------------------------- Some QGIS plugins fail with the current qgis port. These issues can be fixed by installing gdal with the +postgresql94 variant. Would be nice to have this by default. -- Ticket URL: <https://trac.macports.org/ticket/49308> MacPorts <https://www.macports.org/> Ports system for OS X

1 3