#21049: Ghostscript fails to build on Snow Leopard (again) ---------------------------------+------------------------------------------ Reporter: davidw@… | Owner: takanori@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.0 Keywords: | Port: ---------------------------------+------------------------------------------ Description changed by snc@…: Old description:
This appears to be a re-ccurance of #20935 I have also had this error. The initial error message was:
The machine with the problem has been upgraded from 10.5.8 to 10.6 and MacPorts-1.8.0-10.6-SnowLeopard.dmg installed
{{{ sudo port install ghostscript Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for ghostscript ---> Fetching ghostscript ---> Verifying checksum(s) for ghostscript ---> Extracting ghostscript ---> Applying patches to ghostscript ---> Configuring ghostscript Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70" && ./configure --prefix=/opt/local --disable-compile-inits --disable-cups --disable-gtk " returned error 1 Command output: checking sys/window.h presence... no checking for sys/window.h... no checking for an ANSI C-conforming const... yes checking for inline... inline checking for mode_t... yes checking for off_t... yes checking for size_t... yes checking for struct stat.st_blocks... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking size of unsigned long int... 8 checking for pkg-config... /opt/local/bin/pkg-config checking for fontconfig with pkg-config... yes checking for cos in -lm... yes checking for pthread_create in -lpthread... yes checking for iconv_open... no checking for libiconv_open in -liconv... no checking for iconv_open in -liconv... no checking for systempapername in -lpaper... no configure: WARNING: disabling support for libpaper checking for dlopen in -ldl... yes checking for local jpeg library source... no checking for jpeg_set_defaults in -ljpeg... no configure: error: I wasn't able to find a copy of the jpeg library. This is required for compiling ghostscript. Please download a copy of the source, e.g. from http://www.ijg.org/, unpack it at the top level of the gs source tree, and rename the directory to 'jpeg'. }}}
Further examination shows that there are 3 _local directories that contain the jpeg libpng and zlib files that are required
Symlinking as follows:
{{{ ln -s jpeg_local/ jpeg ln -s libpng_local/ libpng ln -s zlib_local/ zlib }}}
This proceeds for much longer before producing the error:
{{{ port install ghostscript Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for ghostscript ---> Configuring ghostscript ---> Building ghostscript Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70" && /usr/bin/make so " returned error 2 Command output: "_cairo_ps_surface_set_eps", referenced from: _devcairo_open_device in gdevcairo.o "_FcInitLoadConfigAndFonts", referenced from: _gp_enumerate_fonts_init in gp_unix.o "_cairo_set_line_join", referenced from: _devcairo_setlinejoin in gdevcairo.o "_cairo_line_to", referenced from: _devcairo_lineto in gdevcairo.o "_cairo_save", referenced from: _devcairo_open_device in gdevcairo.o "_cairo_set_miter_limit", referenced from: _devcairo_setmiterlimit in gdevcairo.o "_cairo_new_path", referenced from: _devcairo_endpath in gdevcairo.o _devcairo_beginpath in gdevcairo.o "_cairo_pattern_reference", referenced from: _devcairo_open_device in gdevcairo.o _devcairo_open_device in gdevcairo.o "_cairo_fill_preserve", referenced from: _devcairo_endpath in gdevcairo.o "_cairo_surface_destroy", referenced from: _devcairo_open_device in gdevcairo.o "_cairo_clip_preserve", referenced from: _devcairo_endpath in gdevcairo.o "_cairo_surface_status", referenced from: _devcairo_check_status in gdevcairo.o ld: symbol(s) not found collect2: ld returned 1 exit status make[1]: *** [bin/../sobin/libgs.8.70.dylib] Error 1 make: *** [so] Error 2
Error: Status 1 encountered during processing. }}}
I have attached a debug build however doing a port clean removes the symlinks so the debug is immediately after the above steps
New description: This appears to be a recurrence of #20935 I have also had this error. The initial error message was: The machine with the problem has been upgraded from 10.5.8 to 10.6 and MacPorts-1.8.0-10.6-SnowLeopard.dmg installed {{{ sudo port install ghostscript Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for ghostscript ---> Fetching ghostscript ---> Verifying checksum(s) for ghostscript ---> Extracting ghostscript ---> Applying patches to ghostscript ---> Configuring ghostscript Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70" && ./configure --prefix=/opt/local --disable-compile-inits --disable-cups --disable-gtk " returned error 1 Command output: checking sys/window.h presence... no checking for sys/window.h... no checking for an ANSI C-conforming const... yes checking for inline... inline checking for mode_t... yes checking for off_t... yes checking for size_t... yes checking for struct stat.st_blocks... yes checking whether time.h and sys/time.h may both be included... yes checking whether struct tm is in sys/time.h or time.h... time.h checking size of unsigned long int... 8 checking for pkg-config... /opt/local/bin/pkg-config checking for fontconfig with pkg-config... yes checking for cos in -lm... yes checking for pthread_create in -lpthread... yes checking for iconv_open... no checking for libiconv_open in -liconv... no checking for iconv_open in -liconv... no checking for systempapername in -lpaper... no configure: WARNING: disabling support for libpaper checking for dlopen in -ldl... yes checking for local jpeg library source... no checking for jpeg_set_defaults in -ljpeg... no configure: error: I wasn't able to find a copy of the jpeg library. This is required for compiling ghostscript. Please download a copy of the source, e.g. from http://www.ijg.org/, unpack it at the top level of the gs source tree, and rename the directory to 'jpeg'. }}} Further examination shows that there are 3 _local directories that contain the jpeg libpng and zlib files that are required Symlinking as follows: {{{ ln -s jpeg_local/ jpeg ln -s libpng_local/ libpng ln -s zlib_local/ zlib }}} This proceeds for much longer before producing the error: {{{ port install ghostscript Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for ghostscript ---> Configuring ghostscript ---> Building ghostscript Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_print_ghostscript/work/ghostscript-8.70" && /usr/bin/make so " returned error 2 Command output: "_cairo_ps_surface_set_eps", referenced from: _devcairo_open_device in gdevcairo.o "_FcInitLoadConfigAndFonts", referenced from: _gp_enumerate_fonts_init in gp_unix.o "_cairo_set_line_join", referenced from: _devcairo_setlinejoin in gdevcairo.o "_cairo_line_to", referenced from: _devcairo_lineto in gdevcairo.o "_cairo_save", referenced from: _devcairo_open_device in gdevcairo.o "_cairo_set_miter_limit", referenced from: _devcairo_setmiterlimit in gdevcairo.o "_cairo_new_path", referenced from: _devcairo_endpath in gdevcairo.o _devcairo_beginpath in gdevcairo.o "_cairo_pattern_reference", referenced from: _devcairo_open_device in gdevcairo.o _devcairo_open_device in gdevcairo.o "_cairo_fill_preserve", referenced from: _devcairo_endpath in gdevcairo.o "_cairo_surface_destroy", referenced from: _devcairo_open_device in gdevcairo.o "_cairo_clip_preserve", referenced from: _devcairo_endpath in gdevcairo.o "_cairo_surface_status", referenced from: _devcairo_check_status in gdevcairo.o ld: symbol(s) not found collect2: ld returned 1 exit status make[1]: *** [bin/../sobin/libgs.8.70.dylib] Error 1 make: *** [so] Error 2 Error: Status 1 encountered during processing. }}} I have attached a debug build however doing a port clean removes the symlinks so the debug is immediately after the above steps -- -- Ticket URL: <http://trac.macports.org/ticket/21049#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS