[MacPorts] #32684: Tripwire failed to install - Error: Status 1 encountered during processing - Lion 10.7.2

28 Dec 2011


      #32684: Tripwire failed to install - Error: Status 1 encountered during processing
- Lion 10.7.2
---------------------------------+------------------------------------------
 Reporter:  eriknorthrop@…       |       Owner:  macports-tickets@…                   
     Type:  defect               |      Status:  new                                  
 Priority:  Normal               |   Milestone:                                       
Component:  ports                |     Version:                                       
 Keywords:                       |        Port:                                       
---------------------------------+------------------------------------------
 Version 2.4.1.2

 Log File....

 version:1
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main autoconf 2.68_2 exists in the ports tree
 :debug:main autoconf 2.68_2  is the latest installed
 :debug:main autoconf 2.68_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5 5.12.3_1 exists in the ports tree
 :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed
 :debug:main perl5 5.12.3_1 +perl5_12 is active
 :debug:main Merging existing variants '+perl5_12' into variants
 :debug:main new fully merged portvariants: perl5_12 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Executing variant perl5_12 provides perl5_12
 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main perl5.12 5.12.3_3 exists in the ports tree
 :debug:main perl5.12 5.12.3_3  is the latest installed
 :debug:main perl5.12 5.12.3_3  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.10_1 exists in the ports tree
 :debug:main gdbm 1.10_1  is the latest installed
 :debug:main gdbm 1.10_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2  is the latest installed
 :debug:main gettext 0.18.1.1_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.14_0 exists in the ports tree
 :debug:main libiconv 1.14_0  is the latest installed
 :debug:main libiconv 1.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_1 exists in the ports tree
 :debug:main ncurses 5.9_1  is the latest installed
 :debug:main ncurses 5.9_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1  is the latest installed
 :debug:main expat 2.0.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main m4 1.4.16_0 exists in the ports tree
 :debug:main m4 1.4.16_0  is the latest installed
 :debug:main m4 1.4.16_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main help2man 1.40.4_1 exists in the ports tree
 :debug:main help2man 1.40.4_1  is the latest installed
 :debug:main help2man 1.40.4_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree
 :debug:main p5.12-locale-gettext 1.50.0_6  is the latest installed
 :debug:main p5.12-locale-gettext 1.50.0_6  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -locale-gettext
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 :debug:main Re-registering default for livecheck.version
 :debug:main Re-registering default for configure.universal_args
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12
 -locale-gettext 1.50.0_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main automake 1.11.1_0 exists in the ports tree
 :debug:main automake 1.11.1_0  is the latest installed
 :debug:main automake 1.11.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libtool 2.4.2_0 exists in the ports tree
 :debug:main libtool 2.4.2_0  is the latest installed
 :debug:main libtool 2.4.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0e_1 exists in the ports tree
 :debug:main openssl 1.0.0e_1  is the latest installed
 :debug:main openssl 1.0.0e_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0  is the latest installed
 :debug:main zlib 1.2.5_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :msg:main --->  Computing dependencies for tripwire:info:main .:debug:main
 Searching for dependency: autoconf
 :debug:main Found Dependency: receipt exists for autoconf
 :debug:main Searching for dependency: automake
 :debug:main Found Dependency: receipt exists for automake
 :debug:main Searching for dependency: libtool
 :debug:main Found Dependency: receipt exists for libtool
 :debug:main Searching for dependency: openssl
 :debug:main Found Dependency: receipt exists for openssl
 :msg:main
 :debug:main Executing org.macports.main (tripwire)
 :debug:main changing euid/egid - current euid: 0 - current egid: 0
 :debug:main egid changed to: 501
 :debug:main euid changed to: 503
 :debug:main Skipping completed org.macports.archivefetch (tripwire)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.fetch (tripwire)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.checksum (tripwire)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.extract (tripwire)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.patch (tripwire)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:main Skipping completed org.macports.configure (tripwire)
 :debug:main Privilege de-escalation not attempted as not running as root.
 :debug:build build phase started at Tue Dec 27 19:05:21 EST 2011
 :notice:build --->  Building tripwire
 :debug:build Executing org.macports.build (tripwire)
 :debug:build Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.7'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
 && /usr/bin/make -j8 -w all'
 :debug:build Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
 && /usr/bin/make -j8 -w all
 :info:build make: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
 :info:build /usr/bin/make  all-recursive
 :info:build make[1]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
 :info:build Making all in man
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
 :info:build Making all in man4
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4'
 :info:build make[3]: Nothing to be done for `all'.
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4'
 :info:build Making all in man5
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5'
 :info:build make[3]: Nothing to be done for `all'.
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5'
 :info:build Making all in man8
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8'
 :info:build make[3]: Nothing to be done for `all'.
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8'
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
 :info:build make[3]: Nothing to be done for `all-am'.
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man'
 :info:build Making all in src
 :info:build make[2]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src'
 :info:build Making all in cryptlib
 :info:build make[3]: Entering directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib'
 :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H            -I..
 -I../..  -I/opt/local/include -I/opt/local/include  -pipe -O2 -arch x86_64
 -c -o integer.o integer.cpp
 :info:build In file included from integer.cpp:5:
 :info:build In file included from ./modarith.h:9:
 :info:build ./algebra.h:276:10: error: use of undeclared identifier
 'Equal'
 :info:build         while (!Equal(g[i1], this->Zero()))
 :info:build                 ^
 :info:build                 this->
 :info:build integer.cpp:2082:38: note: in instantiation of member function
 'AbstractEuclideanDomain<Integer>::Gcd' requested here
 :info:build         return EuclideanDomainOf<Integer>().Gcd(a, b);
 :info:build                                             ^
 :info:build ./algebra.h:13:15: note: must qualify identifier to find this
 declaration in dependent base class
 :info:build         virtual bool Equal(const Element &a, const Element &b)
 const =0;
 :info:build                      ^
 :info:build 1 error generated.
 :info:build make[3]: *** [integer.o] Error 1
 :info:build make[3]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib'
 :info:build make[2]: *** [all-recursive] Error 1
 :info:build make[2]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src'
 :info:build make[1]: *** [all-recursive] Error 1
 :info:build make[1]: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
 :info:build make: *** [all] Error 2
 :info:build make: Leaving directory
 `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src'
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src"
 && /usr/bin/make -j8 -w all " returned error 2
 :error:build Target org.macports.build returned: shell command failed (see
 log for details)
 :debug:build Backtrace: shell command failed (see log for details)
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for tripwire):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Log for tripwire is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/main.log

-- 
Ticket URL: <https://trac.macports.org/ticket/32684>
MacPorts <http://www.macports.org/>
Ports system for Mac OS