[MacPorts] #34729: gtk2-murrine 0.98 fail to compile

2 Jun 2012


      #34729: gtk2-murrine 0.98 fail to compile
-------------------------------------------+--------------------------------
 Reporter:  mattiafrancescomoro@…          |       Owner:  macports-tickets@…                   
     Type:  defect                         |      Status:  new                                  
 Priority:  Normal                         |   Milestone:                                       
Component:  ports                          |     Version:  2.1.1                                
 Keywords:                                 |        Port:                                       
-------------------------------------------+--------------------------------
 I tried to compile gtk2-murrine but:

 {{{
 sudo port -d install gtk2-murrine
 DEBUG: Copying /Users/mfm/Library/Preferences/com.apple.dt.Xcode.plist to
 /opt/local/var/macports/home/Library/Preferences
 DEBUG: Changing to port directory:
 /Users/mfm/Sviluppo/ports/gnome/gtk2-murrine
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_x11 is not provided by port gtk2-murrine.
 DEBUG: Requested variant +no_gnome is not provided by port gtk2-murrine.
 DEBUG: Requested variant +quartz is not provided by port gtk2-murrine.
 DEBUG: changing euid/egid - current euid: 0 - current egid: 0
 DEBUG: egid changed to: 502
 DEBUG: euid changed to: 502
 DEBUG: Starting logging for gtk2-murrine
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: intltool 0.50.2_0 exists in the ports tree
 DEBUG: intltool 0.50.2_0  is the latest installed
 DEBUG: intltool 0.50.2_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/intltool
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: Requested variant +no_gnome is not provided by port intltool.
 DEBUG: Requested variant +no_x11 is not provided by port intltool.
 DEBUG: Requested variant +quartz is not provided by port intltool.
 DEBUG: No need to upgrade! intltool 0.50.2_0 >= intltool 0.50.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.1.0_0 exists in the ports tree
 DEBUG: expat 2.1.0_0  is the latest installed
 DEBUG: expat 2.1.0_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port expat.
 DEBUG: Requested variant +no_x11 is not provided by port expat.
 DEBUG: Requested variant +quartz is not provided by port expat.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.12 5.12.4_0 exists in the ports tree
 DEBUG: perl5.12 5.12.4_0  is the latest installed
 DEBUG: perl5.12 5.12.4_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port perl5.12.
 DEBUG: Requested variant +no_x11 is not provided by port perl5.12.
 DEBUG: Requested variant +quartz is not provided by port perl5.12.
 DEBUG: No need to upgrade! perl5.12 5.12.4_0 >= perl5.12 5.12.4_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gdbm 1.10_1 exists in the ports tree
 DEBUG: gdbm 1.10_1  is the latest installed
 DEBUG: gdbm 1.10_1  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port gdbm.
 DEBUG: Requested variant +no_x11 is not provided by port gdbm.
 DEBUG: Requested variant +quartz is not provided by port gdbm.
 DEBUG: No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.18.1.1_2 exists in the ports tree
 DEBUG: gettext 0.18.1.1_2  is the latest installed
 DEBUG: gettext 0.18.1.1_2 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port gettext.
 DEBUG: Requested variant +no_x11 is not provided by port gettext.
 DEBUG: Requested variant +quartz is not provided by port gettext.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.14_0 exists in the ports tree
 DEBUG: libiconv 1.14_0  is the latest installed
 DEBUG: libiconv 1.14_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port libiconv.
 DEBUG: Requested variant +no_x11 is not provided by port libiconv.
 DEBUG: Requested variant +quartz is not provided by port libiconv.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.9_1 exists in the ports tree
 DEBUG: ncurses 5.9_1  is the latest installed
 DEBUG: ncurses 5.9_1 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port ncurses.
 DEBUG: Requested variant +no_x11 is not provided by port ncurses.
 DEBUG: Requested variant +quartz is not provided by port ncurses.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5.12-xml-parser 2.400.0_3 exists in the ports tree
 DEBUG: p5.12-xml-parser 2.400.0_3  is the latest installed
 DEBUG: p5.12-xml-parser 2.400.0_3  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -xml-parser
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: Re-registering default for livecheck.version
 DEBUG: Re-registering default for configure.universal_args
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port p5.12-xml-
 parser.
 DEBUG: Requested variant +no_x11 is not provided by port p5.12-xml-parser.
 DEBUG: Requested variant +quartz is not provided by port p5.12-xml-parser.
 DEBUG: No need to upgrade! p5.12-xml-parser 2.400.0_3 >= p5.12-xml-parser
 2.400.0_3
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5.12-getopt-long 2.380.0_2 exists in the ports tree
 DEBUG: p5.12-getopt-long 2.380.0_2  is the latest installed
 DEBUG: p5.12-getopt-long 2.380.0_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -getopt-long
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: Re-registering default for livecheck.version
 DEBUG: Re-registering default for configure.universal_args
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: Requested variant +no_gnome is not provided by port p5.12-getopt-
 long.
 DEBUG: Requested variant +no_x11 is not provided by port p5.12-getopt-
 long.
 DEBUG: Requested variant +quartz is not provided by port p5.12-getopt-
 long.
 DEBUG: No need to upgrade! p5.12-getopt-long 2.380.0_2 >= p5.12-getopt-
 long 2.380.0_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5.12-pathtools 3.330.0_2 exists in the ports tree
 DEBUG: p5.12-pathtools 3.330.0_2  is the latest installed
 DEBUG: p5.12-pathtools 3.330.0_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5-pathtools
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: Re-registering default for livecheck.version
 DEBUG: Re-registering default for configure.universal_args
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port
 p5.12-pathtools.
 DEBUG: Requested variant +no_x11 is not provided by port p5.12-pathtools.
 DEBUG: Requested variant +quartz is not provided by port p5.12-pathtools.
 DEBUG: No need to upgrade! p5.12-pathtools 3.330.0_2 >= p5.12-pathtools
 3.330.0_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5.12-scalar-list-utils 1.230.0_2 exists in the ports tree
 DEBUG: p5.12-scalar-list-utils 1.230.0_2  is the latest installed
 DEBUG: p5.12-scalar-list-utils 1.230.0_2  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5
 -scalar-list-utils
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: Re-registering default for livecheck.version
 DEBUG: Re-registering default for configure.universal_args
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port p5.12-scalar-
 list-utils.
 DEBUG: Requested variant +no_x11 is not provided by port p5.12-scalar-
 list-utils.
 DEBUG: Requested variant +quartz is not provided by port p5.12-scalar-
 list-utils.
 DEBUG: No need to upgrade! p5.12-scalar-list-utils 1.230.0_2 >= p5.12
 -scalar-list-utils 1.230.0_2
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.26_1 exists in the ports tree
 DEBUG: pkgconfig 0.26_1  is the latest installed
 DEBUG: pkgconfig 0.26_1 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port pkgconfig.
 DEBUG: Requested variant +no_x11 is not provided by port pkgconfig.
 DEBUG: Requested variant +quartz is not provided by port pkgconfig.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! pkgconfig 0.26_1 >= pkgconfig 0.26_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: glib2 2.32.3_1 exists in the ports tree
 DEBUG: glib2 2.32.3_1  is the latest installed
 DEBUG: glib2 2.32.3_1 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port glib2.
 DEBUG: Requested variant +no_x11 is not provided by port glib2.
 DEBUG: Requested variant +quartz is not provided by port glib2.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! glib2 2.32.3_1 >= glib2 2.32.3_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: zlib 1.2.7_0 exists in the ports tree
 DEBUG: zlib 1.2.7_0  is the latest installed
 DEBUG: zlib 1.2.7_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port zlib.
 DEBUG: Requested variant +no_x11 is not provided by port zlib.
 DEBUG: Requested variant +quartz is not provided by port zlib.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libffi 3.0.11_0 exists in the ports tree
 DEBUG: libffi 3.0.11_0  is the latest installed
 DEBUG: libffi 3.0.11_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port libffi.
 DEBUG: Requested variant +no_x11 is not provided by port libffi.
 DEBUG: Requested variant +quartz is not provided by port libffi.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! libffi 3.0.11_0 >= libffi 3.0.11_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.12.3_1 exists in the ports tree
 DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed
 DEBUG: perl5 5.12.3_1 +perl5_12 is active
 DEBUG: Merging existing variants '+perl5_12' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + perl5_12 +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: universal_variant is false, so not adding the default universal
 variant
 DEBUG: Requested variant +no_gnome is not provided by port perl5.
 DEBUG: Requested variant +no_x11 is not provided by port perl5.
 DEBUG: Requested variant +quartz is not provided by port perl5.
 DEBUG: Executing variant perl5_12 provides perl5_12
 DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gtk2 2.24.10_1 exists in the ports tree
 DEBUG: gtk2 2.24.10_1 +no_x11+quartz is the latest installed
 DEBUG: gtk2 2.24.10_1 +no_x11+quartz+universal is active
 DEBUG: Merging existing variants '+no_x11+quartz+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_gnome + no_x11 +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome/gtk2
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port gtk2.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant no_x11 provides no_x11
 DEBUG: Executing variant quartz provides quartz
 DEBUG: No need to upgrade! gtk2 2.24.10_1 >= gtk2 2.24.10_1
 DEBUG: epoch: in tree: 2 installed: 2
 DEBUG: atk 2.2.0_1 exists in the ports tree
 DEBUG: atk 2.2.0_1  is the latest installed
 DEBUG: atk 2.2.0_1 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/atk
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port atk.
 DEBUG: Requested variant +no_x11 is not provided by port atk.
 DEBUG: Requested variant +quartz is not provided by port atk.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! atk 2.2.0_1 >= atk 2.2.0_1
 DEBUG: epoch: in tree: 1 installed: 1
 DEBUG: pango 1.30.0_1 exists in the ports tree
 DEBUG: pango 1.30.0_1 +no_x11+quartz is the latest installed
 DEBUG: pango 1.30.0_1 +no_x11+quartz+universal is active
 DEBUG: Merging existing variants '+no_x11+quartz+universal-x11' into
 variants
 DEBUG: new fully merged portvariants: universal + no_gnome + x11 - no_x11
 + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/pango
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant +no_gnome is not provided by port pango.
 DEBUG: Executing variant quartz provides quartz
 DEBUG: Executing variant no_x11 provides no_x11
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! pango 1.30.0_1 >= pango 1.30.0_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: cairo 1.12.2_0 exists in the ports tree
 DEBUG: cairo 1.12.2_0 +no_x11+quartz is the latest installed
 DEBUG: cairo 1.12.2_0 +no_x11+quartz+universal is active
 DEBUG: Merging existing variants '+no_x11+quartz+universal-x11' into
 variants
 DEBUG: new fully merged portvariants: universal + no_gnome + x11 - no_x11
 + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/cairo
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port cairo.
 DEBUG: Executing variant universal provides universal
 DEBUG: Executing variant quartz provides quartz
 DEBUG: Executing variant no_x11 provides no_x11
 DEBUG: No need to upgrade! cairo 1.12.2_0 >= cairo 1.12.2_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpixman 0.26.0_0 exists in the ports tree
 DEBUG: libpixman 0.26.0_0  is the latest installed
 DEBUG: libpixman 0.26.0_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpixman
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port libpixman.
 DEBUG: Requested variant +no_x11 is not provided by port libpixman.
 DEBUG: Requested variant +quartz is not provided by port libpixman.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! libpixman 0.26.0_0 >= libpixman 0.26.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: fontconfig 2.9.0_1 exists in the ports tree
 DEBUG: fontconfig 2.9.0_1  is the latest installed
 DEBUG: fontconfig 2.9.0_1 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port fontconfig.
 DEBUG: Requested variant +no_x11 is not provided by port fontconfig.
 DEBUG: Requested variant +quartz is not provided by port fontconfig.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: freetype 2.4.9_1 exists in the ports tree
 DEBUG: freetype 2.4.9_1  is the latest installed
 DEBUG: freetype 2.4.9_1 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port freetype.
 DEBUG: Requested variant +no_x11 is not provided by port freetype.
 DEBUG: Requested variant +quartz is not provided by port freetype.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! freetype 2.4.9_1 >= freetype 2.4.9_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: bzip2 1.0.6_0 exists in the ports tree
 DEBUG: bzip2 1.0.6_0  is the latest installed
 DEBUG: bzip2 1.0.6_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant +no_gnome is not provided by port bzip2.
 DEBUG: Requested variant +no_x11 is not provided by port bzip2.
 DEBUG: Requested variant +quartz is not provided by port bzip2.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libpng 1.4.11_0 exists in the ports tree
 DEBUG: libpng 1.4.11_0  is the latest installed
 DEBUG: libpng 1.4.11_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port libpng.
 DEBUG: Requested variant +no_x11 is not provided by port libpng.
 DEBUG: Requested variant +quartz is not provided by port libpng.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! libpng 1.4.11_0 >= libpng 1.4.11_0
 DEBUG: epoch: in tree: 2 installed: 2
 DEBUG: gdk-pixbuf2 2.26.1_1 exists in the ports tree
 DEBUG: gdk-pixbuf2 2.26.1_1  is the latest installed
 DEBUG: gdk-pixbuf2 2.26.1_1 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics
 /gdk-pixbuf2
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port gdk-pixbuf2.
 DEBUG: Requested variant +no_x11 is not provided by port gdk-pixbuf2.
 DEBUG: Requested variant +quartz is not provided by port gdk-pixbuf2.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! gdk-pixbuf2 2.26.1_1 >= gdk-pixbuf2 2.26.1_1
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jasper 1.900.1_9 exists in the ports tree
 DEBUG: jasper 1.900.1_9  is the latest installed
 DEBUG: jasper 1.900.1_9 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jasper
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port jasper.
 DEBUG: Requested variant +no_x11 is not provided by port jasper.
 DEBUG: Requested variant +quartz is not provided by port jasper.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! jasper 1.900.1_9 >= jasper 1.900.1_9
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: jpeg 8d_0 exists in the ports tree
 DEBUG: jpeg 8d_0  is the latest installed
 DEBUG: jpeg 8d_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port jpeg.
 DEBUG: Requested variant +no_x11 is not provided by port jpeg.
 DEBUG: Requested variant +quartz is not provided by port jpeg.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! jpeg 8d_0 >= jpeg 8d_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: tiff 3.9.5_0 exists in the ports tree
 DEBUG: tiff 3.9.5_0  is the latest installed
 DEBUG: tiff 3.9.5_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port tiff.
 DEBUG: Requested variant +no_x11 is not provided by port tiff.
 DEBUG: Requested variant +quartz is not provided by port tiff.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: shared-mime-info 1.0_0 exists in the ports tree
 DEBUG: shared-mime-info 1.0_0  is the latest installed
 DEBUG: shared-mime-info 1.0_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel
 /shared-mime-info
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port shared-mime-
 info.
 DEBUG: Requested variant +no_x11 is not provided by port shared-mime-info.
 DEBUG: Requested variant +quartz is not provided by port shared-mime-info.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! shared-mime-info 1.0_0 >= shared-mime-info
 1.0_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libxml2 2.7.8_0 exists in the ports tree
 DEBUG: libxml2 2.7.8_0  is the latest installed
 DEBUG: libxml2 2.7.8_0 +universal is active
 DEBUG: Merging existing variants '+universal' into variants
 DEBUG: new fully merged portvariants: universal + no_x11 + no_gnome +
 quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant +no_gnome is not provided by port libxml2.
 DEBUG: Requested variant +no_x11 is not provided by port libxml2.
 DEBUG: Requested variant +quartz is not provided by port libxml2.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: hicolor-icon-theme 0.12_0 exists in the ports tree
 DEBUG: hicolor-icon-theme 0.12_0  is the latest installed
 DEBUG: hicolor-icon-theme 0.12_0  is active
 DEBUG: Merging existing variants '' into variants
 DEBUG: new fully merged portvariants: no_x11 + no_gnome + quartz +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/gnome
 /hicolor-icon-theme
 DEBUG: OS darwin/11.4.0 (Mac OS X 10.7) arch i386
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: only one arch supported, so not adding the default universal
 variant
 DEBUG: Requested variant +no_gnome is not provided by port hicolor-icon-
 theme.
 DEBUG: Requested variant +no_x11 is not provided by port hicolor-icon-
 theme.
 DEBUG: Requested variant +quartz is not provided by port hicolor-icon-
 theme.
 DEBUG: No need to upgrade! hicolor-icon-theme 0.12_0 >= hicolor-icon-theme
 0.12_0
 --->  Computing dependencies for gtk2-murrine
 DEBUG: gtk2-murrine has no conflicts
 DEBUG: Searching for dependency: intltool
 DEBUG: Found Dependency: receipt exists for intltool
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: gtk2
 DEBUG: Found Dependency: receipt exists for gtk2
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Executing org.macports.main (gtk2-murrine)
 DEBUG: changing euid/egid - current euid: 0 - current egid: 0
 DEBUG: egid changed to: 502
 DEBUG: euid changed to: 502
 DEBUG: Skipping completed org.macports.archivefetch (gtk2-murrine)
 DEBUG: Privilege de-escalation not attempted as not running as root.
 DEBUG: Skipping completed org.macports.fetch (gtk2-murrine)
 DEBUG: Privilege de-escalation not attempted as not running as root.
 DEBUG: Skipping completed org.macports.checksum (gtk2-murrine)
 DEBUG: Privilege de-escalation not attempted as not running as root.
 DEBUG: Skipping completed org.macports.extract (gtk2-murrine)
 DEBUG: Privilege de-escalation not attempted as not running as root.
 DEBUG: Skipping completed org.macports.patch (gtk2-murrine)
 DEBUG: Privilege de-escalation not attempted as not running as root.
 DEBUG: Skipping completed org.macports.configure (gtk2-murrine)
 DEBUG: Privilege de-escalation not attempted as not running as root.
 DEBUG: build phase started at Sat Jun  2 20:42:05 CEST 2012
 --->  Building gtk2-murrine
 DEBUG: Executing org.macports.build (gtk2-murrine)
 DEBUG: Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.7'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0"
 && /usr/bin/make -j2 -w all'
 DEBUG: Executing command line:  cd
 "/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0"
 && /usr/bin/make -j2 -w all
 make: Entering directory
 `/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
 Making all in schema
 make[1]: Entering directory
 `/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0/schema'
 make[1]: Nothing to be done for `all'.
 make[1]: Leaving directory
 `/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0/schema'
 make[1]: Entering directory
 `/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
   CC     animation.lo
   CC     murrine_rc_style.lo
 In file included from ./src/animation.c:24:
 /opt/local/include/glib-2.0/glib/gtimer.h:28:2: error: #error "Only
 <glib.h> can be included directly."
 make[1]: *** [animation.lo] Error 1
 make[1]: *** Waiting for unfinished jobs....
 make[1]: Leaving directory
 `/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
 make: *** [all-recursive] Error 1
 make: Leaving directory
 `/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0'
 Command failed:  cd
 "/opt/local/var/macports/build/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/work/murrine-0.98.0"
 && /usr/bin/make -j2 -w all
 Exit code: 2
 Error: org.macports.build for port gtk2-murrine returned: command
 execution failed
 DEBUG: Error code: CHILDSTATUS 9302 2
 DEBUG: Backtrace: command execution failed
     while executing
 "system -nice 0 $fullcmdstring"
     ("eval" body line 1)
     invoked from within
 "eval system $notty $nice \$fullcmdstring"
     invoked from within
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 Warning: targets not executed for gtk2-murrine: org.macports.activate
 org.macports.build org.macports.destroot org.macports.install
 Please see the log file for port gtk2-murrine for details:
 /opt/local/var/macports/logs/_Users_mfm_Sviluppo_ports_gnome_gtk2-murrine/gtk2-murrine/main.log
 To report a bug, follow the instructions in the guide:
     http://guide.macports.org/#project.tickets
 Error: Processing of port gtk2-murrine failed
 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/34729>
MacPorts <http://www.macports.org/>
Ports system for Mac OS