[MacPorts] #29449: qgit install error (qt4-mac updated?)

#29449: qgit install error (qt4-mac updated?) -------------------------------+-------------------------------------------- Reporter: sheefoz@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Not set | Milestone: Component: ports | Version: 1.9.2 Keywords: qgit qt4-mac | Port: qgit -------------------------------+-------------------------------------------- {{{ sudo port install qgit ---> Computing dependencies for qgit ---> Fetching qgit ---> Verifying checksum(s) for qgit ---> Extracting qgit ---> Applying patches to qgit ---> Configuring qgit Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) Log for qgit is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} {{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.25_2 exists in the ports tree :debug:main pkgconfig 0.25_2 +universal is the latest installed :debug:main pkgconfig 0.25_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! pkgconfig 0.25_2 >= pkgconfig 0.25_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main qt4-mac 4.7.3_0 exists in the ports tree :debug:main qt4-mac 4.7.3_0 +quartz+universal is the latest installed :debug:main qt4-mac 4.7.3_0 +quartz+universal is active :debug:main Merging existing variants '+quartz+universal' into variants :debug:main new fully merged portvariants: universal + quartz + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/aqua/qt4-mac :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/qt4-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant quartz provides quartz :debug:main Executing variant universal provides universal :debug:main No need to upgrade! qt4-mac 4.7.3_0 >= qt4-mac 4.7.3_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 +universal is the latest installed :debug:main zlib 1.2.5_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main dbus 1.2.24_1 exists in the ports tree :debug:main dbus 1.2.24_1 +universal is the latest installed :debug:main dbus 1.2.24_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/dbus :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! dbus 1.2.24_1 >= dbus 1.2.24_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 +universal is the latest installed :debug:main expat 2.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0d_0 exists in the ports tree :debug:main openssl 1.0.0d_0 +universal is the latest installed :debug:main openssl 1.0.0d_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.6_0 exists in the ports tree :debug:main sqlite3 3.7.6_0 +universal is the latest installed :debug:main sqlite3 3.7.6_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3 :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main readline 6.2.000_0 exists in the ports tree :debug:main readline 6.2.000_0 +universal is the latest installed :debug:main readline 6.2.000_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_0 exists in the ports tree :debug:main ncurses 5.9_0 +universal is the latest installed :debug:main ncurses 5.9_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main tiff 3.9.4_0 exists in the ports tree :debug:main tiff 3.9.4_0 +universal is the latest installed :debug:main tiff 3.9.4_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/tiff :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! tiff 3.9.4_0 >= tiff 3.9.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main jpeg 8c_0 exists in the ports tree :debug:main jpeg 8c_0 +universal is the latest installed :debug:main jpeg 8c_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/jpeg :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! jpeg 8c_0 >= jpeg 8c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libpng 1.4.7_0 exists in the ports tree :debug:main libpng 1.4.7_0 +universal is the latest installed :debug:main libpng 1.4.7_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libpng :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libpng 1.4.7_0 >= libpng 1.4.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libmng 1.0.10_2 exists in the ports tree :debug:main libmng 1.0.10_2 +universal is the latest installed :debug:main libmng 1.0.10_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/libmng :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main lcms 1.19_2 exists in the ports tree :debug:main lcms 1.19_2 +universal is the latest installed :debug:main lcms 1.19_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/lcms :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! lcms 1.19_2 >= lcms 1.19_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main git-core 1.7.5.1_0 exists in the ports tree :debug:main git-core 1.7.5.1_0 +doc+python27+universal is the latest installed :debug:main git-core 1.7.5.1_0 +doc+python27+universal is active :debug:main Merging existing variants '+doc+python27+universal' into variants :debug:main new fully merged portvariants: universal + doc + python27 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /git-core :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main Executing variant python27 provides python27 :debug:main Executing variant doc provides doc :debug:main No need to upgrade! git-core 1.7.5.1_0 >= git-core 1.7.5.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.3_1 exists in the ports tree :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed :debug:main perl5 5.12.3_1 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: universal + perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Requested variant universal is not provided by port perl5. :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_1 exists in the ports tree :debug:main perl5.12 5.12.3_1 +universal is the latest installed :debug:main perl5.12 5.12.3_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main curl 7.21.6_0 exists in the ports tree :debug:main curl 7.21.6_0 +ssl+universal is the latest installed :debug:main curl 7.21.6_0 +ssl+universal is active :debug:main Merging existing variants '+ssl+universal' into variants :debug:main new fully merged portvariants: universal + ssl + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main Executing variant ssl provides ssl :debug:main No need to upgrade! curl 7.21.6_0 >= curl 7.21.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libidn 1.22_0 exists in the ports tree :debug:main libidn 1.22_0 +universal is the latest installed :debug:main libidn 1.22_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libidn 1.22_0 >= libidn 1.22_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.13.1_0 exists in the ports tree :debug:main libiconv 1.13.1_0 +universal is the latest installed :debug:main libiconv 1.13.1_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 +universal is the latest installed :debug:main gettext 0.18.1.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main curl-ca-bundle 7.21.6_0 exists in the ports tree :debug:main curl-ca-bundle 7.21.6_0 is the latest installed :debug:main curl-ca-bundle 7.21.6_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl- ca-bundle :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Requested variant universal is not provided by port curl-ca- bundle. :debug:main No need to upgrade! curl-ca-bundle 7.21.6_0 >= curl-ca-bundle 7.21.6_0 :debug:main epoch: in tree: 2 installed: 2 :debug:main python27 2.7.1_2 exists in the ports tree :debug:main python27 2.7.1_2 +universal is the latest installed :debug:main python27 2.7.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27 :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! python27 2.7.1_2 >= python27 2.7.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main db46 4.6.21_6 exists in the ports tree :debug:main db46 4.6.21_6 +universal is the latest installed :debug:main db46 4.6.21_6 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46 :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.8.3_3 exists in the ports tree :debug:main gdbm 1.8.3_3 +universal is the latest installed :debug:main gdbm 1.8.3_3 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main bzip2 1.0.6_0 exists in the ports tree :debug:main bzip2 1.0.6_0 +universal is the latest installed :debug:main bzip2 1.0.6_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main rsync 3.0.7_1 exists in the ports tree :debug:main rsync 3.0.7_1 +universal is the latest installed :debug:main rsync 3.0.7_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! rsync 3.0.7_1 >= rsync 3.0.7_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main popt 1.16_0 exists in the ports tree :debug:main popt 1.16_0 +universal is the latest installed :debug:main popt 1.16_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! popt 1.16_0 >= popt 1.16_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5-error 0.17016_1 exists in the ports tree :debug:main p5-error 0.17016_1 is the latest installed :debug:main p5-error 0.17016_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error :debug:main OS darwin/10.7.4 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for configure.universal_args :debug:main only one arch supported, so not adding the default universal variant :debug:main Requested variant universal is not provided by port p5-error. :debug:main No need to upgrade! p5-error 0.17016_1 >= p5-error 0.17016_1 :msg:main ---> Computing dependencies for qgit:info:main .:debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: qt4-mac :debug:main Found Dependency: receipt exists for qt4-mac :debug:main Searching for dependency: git-core :debug:main Found Dependency: receipt exists for git-core :msg:main :debug:main Executing org.macports.main (qgit) :msg:main ---> Fetching qgit :debug:fetch fetch phase started at Fri May 13 07:43:08 EEST 2011 :debug:fetch Executing org.macports.fetch (qgit) :msg:fetch ---> Verifying checksum(s) for qgit :debug:checksum checksum phase started at Fri May 13 07:43:08 EEST 2011 :debug:checksum Executing org.macports.checksum (qgit) :info:checksum ---> Checksumming qgit-2.2.tar.bz2 :debug:checksum Correct (md5) checksum for qgit-2.2.tar.bz2 :debug:checksum setting option extract.cmd to /usr/bin/bzip2 :msg:checksum ---> Extracting qgit :debug:extract extract phase started at Fri May 13 07:43:08 EEST 2011 :debug:extract Executing proc-pre-org.macports.extract-extract-0 :debug:extract Executing org.macports.extract (qgit) :info:extract ---> Extracting qgit-2.2.tar.bz2 :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/qgit/qgit-2.2.tar.bz2' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/qgit/qgit-2.2.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf -' :debug:patch patch phase started at Fri May 13 07:43:08 EEST 2011 :debug:patch Executing org.macports.patch (qgit) :msg:patch ---> Applying patches to qgit :info:patch ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qgit/files/patch_src_namespace_def.cpp.diff :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit" && /usr/bin/patch -p0' :info:patch patching file src/namespace_def.cpp :info:patch ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/qgit/files/patch_src_qgit.cpp.diff :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit" && /usr/bin/patch -p0' :info:patch patching file src/qgit.cpp :debug:patch Executing proc-post-org.macports.patch-patch-0 :msg:patch ---> Configuring qgit :debug:patch Using compiler 'Mac OS X gcc 4.2' :debug:configure configure phase started at Fri May 13 07:43:08 EEST 2011 :debug:configure Executing org.macports.configure (qgit) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64 -arch i386' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64 -arch i386' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' PKG_CONFIG_PATH='/opt/local/lib/pkgconfig' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2' LDFLAGS='-L/opt/local/lib -arch x86_64 -arch i386' FCFLAGS='-pipe -O2' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c' MOC='/opt/local/bin/moc' FFLAGS='-pipe -O2' OBJCFLAGS='-pipe -O2 -arch x86_64 -arch i386' QTDIR='/opt/local' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' QMAKE='/opt/local/bin/qmake' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit" && /opt/local/bin/qmake --disable-dependency-tracking' :info:configure ***Unknown option --disable-dependency-tracking :info:configure Usage: /opt/local/bin/qmake [mode] [options] [files] :info:configure :info:configure QMake has two modes, one mode for generating project files based on :info:configure some heuristics, and the other for generating makefiles. Normally you :info:configure shouldn't need to specify a mode, as makefile generation is the default :info:configure mode for qmake, but you may use this to test qmake on an existing project :info:configure :info:configure Mode: :info:configure -project Put qmake into project file generation mode :info:configure In this mode qmake interprets files as files to :info:configure be built, :info:configure defaults to *.c; *.ui; *.y; *.l; *.ts; *.xlf; *.qrc; *.h; *.hpp; *.hh; *.hxx; *.H; *.cpp; *.cc; *.cxx; *.C :info:configure Note: The created .pro file probably will :info:configure need to be edited. For example add the QT variable to :info:configure specify what modules are required. :info:configure -makefile Put qmake into makefile generation mode (default) :info:configure In this mode qmake interprets files as project files to :info:configure be processed, if skipped qmake will try to find a project :info:configure file in your current working directory :info:configure :info:configure Warnings Options: :info:configure -Wnone Turn off all warnings; specific ones may be re-enabled by :info:configure later -W options :info:configure -Wall Turn on all warnings :info:configure -Wparser Turn on parser warnings :info:configure -Wlogic Turn on logic warnings (on by default) :info:configure -Wdeprecated Turn on deprecation warnings (on by default) :info:configure :info:configure Options: :info:configure * You can place any variable assignment in options and it will be * :info:configure * processed as if it was in [files]. These assignments will be parsed * :info:configure * before [files]. * :info:configure -o file Write output to file :info:configure -d Increase debug level :info:configure -t templ Overrides TEMPLATE as templ :info:configure -tp prefix Overrides TEMPLATE so that prefix is prefixed into the value :info:configure -help This help :info:configure -v Version information :info:configure -after All variable assignments after this will be :info:configure parsed after [files] :info:configure -norecursive Don't do a recursive search :info:configure -recursive Do a recursive search :info:configure -set <prop> <value> Set persistent property :info:configure -query <prop> Query persistent property. Show all if <prop> is empty. :info:configure -cache file Use file as cache [makefile mode only] :info:configure -spec spec Use spec as QMAKESPEC [makefile mode only] :info:configure -nocache Don't use a cache file [makefile mode only] :info:configure -nodepend Don't generate dependencies [makefile mode only] :info:configure -nomoc Don't generate moc targets [makefile mode only] :info:configure -nopwd Don't look for files in pwd [project mode only] :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/work/qgit" && /opt/local/bin/qmake --disable-dependency-tracking " returned error 1 :error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details) :debug:configure Backtrace: configure failure: shell command failed (see log for details) while executing "$procedure $targetname" :info:configure Warning: the following items did not execute (for qgit): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:configure Log for qgit is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_qgit/main.log }}} Note: i am new ot mac, that being said, my opinion is that qt4 got updated and qgit is trying to use qmake with invalid old syntax ? -- Ticket URL: <https://trac.macports.org/ticket/29449> MacPorts <http://www.macports.org/> Ports system for Mac OS