#26276: curl-ca-bundle: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory --------------------------------------+------------------------------------- Reporter: rdclark@… | Owner: ryandesign@… Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: curl-ca-bundle --------------------------------------+------------------------------------- Changes (by ryandesign@…): * status: new => assigned * owner: macports-tickets@… => ryandesign@… * cc: ryandesign@… (removed) * port: => curl-ca-bundle Old description:
Upgrading from curl-ca-bundle@7.21.1, I encountered the cannot stat certdata problem. Tried the remedy from previous ticket 25739 (clean --all and reinstall) to no avail.
Here's the log, which shows the checksum for the file passes, but then the file isn't found.
Any thoughts on working around this?
version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.8.9_0 exists in the ports tree :debug:main perl5 5.8.9_0 is the latest installed :debug:main perl5 5.8.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.8 5.8.9_3 exists in the ports tree :debug:main perl5.8 5.8.9_3 is the latest installed :debug:main perl5.8 5.8.9_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 :msg:main ---> Computing dependencies for curl-ca-bundle:info:main .:debug:main Searching for dependency: perl5 :debug:main Found Dependency: receipt exists for perl5 :msg:main :debug:main Executing org.macports.main (curl-ca-bundle) :debug:main Skipping completed org.macports.fetch (curl-ca-bundle) :debug:main Skipping completed org.macports.checksum (curl-ca-bundle) :debug:main setting option extract.cmd to /usr/bin/bzip2 :msg:main ---> Extracting curl-ca-bundle :debug:extract extract phase started at Sun Aug 29 11:45:48 PDT 2010 :debug:extract Executing org.macports.extract (curl-ca-bundle) :info:extract ---> Extracting curl-7.21.1.tar.bz2 :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf - curl-7.21.1/Makefile curl-7.21.1/lib/mk-ca-bundle.pl' :debug:extract Executing proc-post-org.macports.extract-extract-0 :error:extract Target org.macports.extract returned: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory :debug:extract Backtrace: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory while executing "$post $targetname" :info:extract Warning: the following items did not execute (for curl-ca- bundle): org.macports.activate org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:extract Log for curl-ca-bundle is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/main.log
New description: Upgrading from curl-ca-bundle@7.21.1, I encountered the cannot stat certdata problem. Tried the remedy from [ticket:25739 previous ticket 25739] (`clean --all` and reinstall) to no avail. Here's the log, which shows the checksum for the file passes, but then the file isn't found. Any thoughts on working around this? {{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.8.9_0 exists in the ports tree :debug:main perl5 5.8.9_0 is the latest installed :debug:main perl5 5.8.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.8 5.8.9_3 exists in the ports tree :debug:main perl5.8 5.8.9_3 is the latest installed :debug:main perl5.8 5.8.9_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 :msg:main ---> Computing dependencies for curl-ca-bundle:info:main .:debug:main Searching for dependency: perl5 :debug:main Found Dependency: receipt exists for perl5 :msg:main :debug:main Executing org.macports.main (curl-ca-bundle) :debug:main Skipping completed org.macports.fetch (curl-ca-bundle) :debug:main Skipping completed org.macports.checksum (curl-ca-bundle) :debug:main setting option extract.cmd to /usr/bin/bzip2 :msg:main ---> Extracting curl-ca-bundle :debug:extract extract phase started at Sun Aug 29 11:45:48 PDT 2010 :debug:extract Executing org.macports.extract (curl-ca-bundle) :info:extract ---> Extracting curl-7.21.1.tar.bz2 :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf - curl-7.21.1/Makefile curl-7.21.1/lib /mk-ca-bundle.pl' :debug:extract Executing proc-post-org.macports.extract-extract-0 :error:extract Target org.macports.extract returned: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory :debug:extract Backtrace: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory while executing "$post $targetname" :info:extract Warning: the following items did not execute (for curl-ca- bundle): org.macports.activate org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:extract Log for curl-ca-bundle is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/main.log }}} -- Comment: Remember to fill in the Port field and to use WikiFormatting. Please clean and try again and if it fails again attach the log immediately after doing so; the log you pasted here says "Skipping completed org.macports.fetch" and "Skipping completed org.macports.checksum" indicating it was not taken from a clean run. The log says "xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory". Does that file exist? If not, watch what the port does during the fetch phase. Does it fetch that file? -- Ticket URL: <http://trac.macports.org/ticket/26276#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS