[MacPorts] #24091: g95 fails to install

17 Mar 2010

      #24091: g95 fails to install
-----------------------------------+----------------------------------------
 Reporter:  ryan.manger@…          |       Owner:  macports-tickets@…                   
     Type:  defect                 |      Status:  new                                  
 Priority:  Normal                 |   Milestone:                                       
Component:  ports                  |     Version:  1.8.2                                
 Keywords:                         |        Port:                                       
-----------------------------------+----------------------------------------
 Computer: MBPro OS X 10.4.11

 Tried installing g95, but received an error about dependencies. I began to
 install the individual dependencies, but ran into a problem with help2man.

 Any suggestions/solutions will be greatly appreciated.

 Thank you,

 Ryan

 Here is what happens when I try installing g95:

 {{{
 dyn21924543:~ Ryan$ sudo port -d install g95
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/g95
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/g95
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port g95.
 DEBUG: Requested variant i386 is not provided by port g95.
 DEBUG: Requested variant macosx is not provided by port g95.
 DEBUG: Executing variant darwin_8 provides darwin_8
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13.1_0 exists in the ports tree
 DEBUG: libiconv 1.13.1_0  is the latest installed
 DEBUG: libiconv 1.13.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 --->  Computing dependencies for g95
 DEBUG: Searching for dependency: libtool
 DEBUG: Didn't find receipt, going to depspec regex for: libtool
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: adding the default universal variant
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: Executing variant darwin provides darwin
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: odcctools
 DEBUG: Didn't find receipt, going to depspec regex for: odcctools
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/odcctools
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/odcctools
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port odcctools.
 DEBUG: Requested variant i386 is not provided by port odcctools.
 DEBUG: Requested variant macosx is not provided by port odcctools.
 DEBUG: Searching for dependency: automake
 DEBUG: Didn't find receipt, going to depspec regex for: automake
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: Searching for dependency: perl5
 DEBUG: Found Dependency: receipt exists for perl5
 DEBUG: Searching for dependency: autoconf
 DEBUG: Didn't find receipt, going to depspec regex for: autoconf
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Searching for dependency: perl5
 DEBUG: Found Dependency: receipt exists for perl5
 DEBUG: Searching for dependency: m4
 DEBUG: Found Dependency: receipt exists for m4
 DEBUG: Searching for dependency: help2man
 DEBUG: Didn't find receipt, going to depspec regex for: help2man
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 8.11.1
 DEBUG: Mac OS X Version: 10.4
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Searching for dependency: perl5
 DEBUG: Found Dependency: receipt exists for perl5
 DEBUG: Searching for dependency: p5-locale-gettext
 DEBUG: Found Dependency: receipt exists for p5-locale-gettext
 DEBUG: Searching for dependency: gettext
 DEBUG: Found Dependency: receipt exists for gettext
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: subversion
 DEBUG: Found Dependency: receipt exists for subversion
 DEBUG: Executing org.macports.main (help2man)
 DEBUG: Skipping completed org.macports.fetch (help2man)
 DEBUG: Skipping completed org.macports.checksum (help2man)
 DEBUG: Skipping completed org.macports.extract (help2man)
 DEBUG: Skipping completed org.macports.patch (help2man)
 DEBUG: Skipping completed org.macports.configure (help2man)
 --->  Building help2man
 DEBUG: Executing org.macports.build (help2man)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.4'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_help2man/work/help2man-1.37.1"
 && /usr/bin/make -j2 all'
 /usr/bin/gcc-4.0  -o bindtextdomain.so -fPIC -bundle -L/opt/local/lib
 bindtextdomain.c -lintl
 bindtextdomain.c: In function 'setup':
 bindtextdomain.c:42: error: 'RTLD_NEXT' undeclared (first use in this
 function)
 bindtextdomain.c:42: error: (Each undeclared identifier is reported only
 once
 bindtextdomain.c:42: error: for each function it appears in.)
 make: *** [bindtextdomain.so] Error 1
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_help2man/work/help2man-1.37.1"
 && /usr/bin/make -j2 all " returned error 2
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_textproc_help2man/work/help2man-1.37.1"
 && /usr/bin/make -j2 all " returned error 2
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for help2man):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: The following dependencies failed to build: libtool automake
 autoconf help2man odcctools
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>

 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/24091>
MacPorts <http://www.macports.org/>
Ports system for Mac OS