[MacPorts] #23196: xpm build fails on snow leopard i386

9 Jan 2010


      #23196: xpm build fails on snow leopard i386
--------------------------------+-------------------------------------------
 Reporter:  kosta@…             |       Owner:  macports-tickets@…                   
     Type:  defect              |      Status:  new                                  
 Priority:  Normal              |   Milestone:                                       
Component:  ports               |     Version:  1.8.2                                
 Keywords:                      |        Port:                                       
--------------------------------+-------------------------------------------
 $ sudo port -d install xpm
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xpm
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xpm.
 DEBUG: Requested variant i386 is not provided by port xpm.
 DEBUG: Requested variant macosx is not provided by port xpm.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libX11
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libX11 1.3.2_0 exists in the ports tree
 DEBUG: xorg-libX11 1.3.2_0  is the latest installed
 DEBUG: xorg-libX11 1.3.2_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libX11
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libX11.
 DEBUG: Requested variant i386 is not provided by port xorg-libX11.
 DEBUG: Requested variant macosx is not provided by port xorg-libX11.
 DEBUG: Executing variant universal provides universal
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: pkgconfig 0.23_1 exists in the ports tree
 DEBUG: pkgconfig 0.23_1  is the latest installed
 DEBUG: pkgconfig 0.23_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port pkgconfig.
 DEBUG: Requested variant i386 is not provided by port pkgconfig.
 DEBUG: Requested variant macosx is not provided by port pkgconfig.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! pkgconfig 0.23_1 >= pkgconfig 0.23_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-util-macros
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-util-macros 1.4.1_0 exists in the ports tree
 DEBUG: xorg-util-macros 1.4.1_0  is the latest installed
 DEBUG: xorg-util-macros 1.4.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 util-macros
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-util-macros.
 DEBUG: Requested variant i386 is not provided by port xorg-util-macros.
 DEBUG: Requested variant macosx is not provided by port xorg-util-macros.
 DEBUG: No need to upgrade! xorg-util-macros 1.4.1_0 >= xorg-util-macros
 1.4.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xtrans
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xtrans 1.2.5_0 exists in the ports tree
 DEBUG: xorg-xtrans 1.2.5_0  is the latest installed
 DEBUG: xorg-xtrans 1.2.5_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xtrans
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xtrans.
 DEBUG: Requested variant i386 is not provided by port xorg-xtrans.
 DEBUG: Requested variant macosx is not provided by port xorg-xtrans.
 DEBUG: No need to upgrade! xorg-xtrans 1.2.5_0 >= xorg-xtrans 1.2.5_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-bigreqsproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-bigreqsproto 1.1.0_0 exists in the ports tree
 DEBUG: xorg-bigreqsproto 1.1.0_0  is the latest installed
 DEBUG: xorg-bigreqsproto 1.1.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 bigreqsproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant i386 is not provided by port xorg-bigreqsproto.
 DEBUG: Requested variant macosx is not provided by port xorg-bigreqsproto.
 DEBUG: No need to upgrade! xorg-bigreqsproto 1.1.0_0 >= xorg-bigreqsproto
 1.1.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xcmiscproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xcmiscproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xcmiscproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xcmiscproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xcmiscproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xcmiscproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xcmiscproto.
 DEBUG: No need to upgrade! xorg-xcmiscproto 1.2.0_0 >= xorg-xcmiscproto
 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xproto 7.0.16_0 exists in the ports tree
 DEBUG: xorg-xproto 7.0.16_0  is the latest installed
 DEBUG: xorg-xproto 7.0.16_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xproto.
 DEBUG: No need to upgrade! xorg-xproto 7.0.16_0 >= xorg-xproto 7.0.16_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xextproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xextproto 7.1.1_0 exists in the ports tree
 DEBUG: xorg-xextproto 7.1.1_0  is the latest installed
 DEBUG: xorg-xextproto 7.1.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xextproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-xextproto.
 DEBUG: Requested variant i386 is not provided by port xorg-xextproto.
 DEBUG: Requested variant macosx is not provided by port xorg-xextproto.
 DEBUG: No need to upgrade! xorg-xextproto 7.1.1_0 >= xorg-xextproto
 7.1.1_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-xf86bigfontproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-xf86bigfontproto 1.2.0_0 exists in the ports tree
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is the latest installed
 DEBUG: xorg-xf86bigfontproto 1.2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 xf86bigfontproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant i386 is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: Requested variant macosx is not provided by port xorg-
 xf86bigfontproto.
 DEBUG: No need to upgrade! xorg-xf86bigfontproto 1.2.0_0 >= xorg-
 xf86bigfontproto 1.2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-inputproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-inputproto 2.0_0 exists in the ports tree
 DEBUG: xorg-inputproto 2.0_0  is the latest installed
 DEBUG: xorg-inputproto 2.0_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 inputproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-inputproto.
 DEBUG: Requested variant i386 is not provided by port xorg-inputproto.
 DEBUG: Requested variant macosx is not provided by port xorg-inputproto.
 DEBUG: No need to upgrade! xorg-inputproto 2.0_0 >= xorg-inputproto 2.0_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-kbproto
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-kbproto 1.0.4_0 exists in the ports tree
 DEBUG: xorg-kbproto 1.0.4_0  is the latest installed
 DEBUG: xorg-kbproto 1.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 kbproto
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port xorg-kbproto.
 DEBUG: Requested variant i386 is not provided by port xorg-kbproto.
 DEBUG: Requested variant macosx is not provided by port xorg-kbproto.
 DEBUG: No need to upgrade! xorg-kbproto 1.0.4_0 >= xorg-kbproto 1.0.4_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: groff 1.20.1_1 exists in the ports tree
 DEBUG: groff 1.20.1_1  is the latest installed
 DEBUG: groff 1.20.1_1 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/groff
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port groff.
 DEBUG: Requested variant i386 is not provided by port groff.
 DEBUG: Requested variant macosx is not provided by port groff.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! groff 1.20.1_1 >= groff 1.20.1_1
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXdmcp
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXdmcp 1.0.3_0 exists in the ports tree
 DEBUG: xorg-libXdmcp 1.0.3_0  is the latest installed
 DEBUG: xorg-libXdmcp 1.0.3_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXdmcp
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant i386 is not provided by port xorg-libXdmcp.
 DEBUG: Requested variant macosx is not provided by port xorg-libXdmcp.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! xorg-libXdmcp 1.0.3_0 >= xorg-libXdmcp 1.0.3_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/x11
 /xorg-libXau
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: xorg-libXau 1.0.5_0 exists in the ports tree
 DEBUG: xorg-libXau 1.0.5_0  is the latest installed
 DEBUG: xorg-libXau 1.0.5_0 +universal is active
 DEBUG: Merging existing variants universal into variants
 DEBUG: new fully merged portvariants: universal +
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/x11/xorg-
 libXau
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.2.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port xorg-libXau.
 DEBUG: Requested variant i386 is not provided by port xorg-libXau.
 DEBUG: Requested variant macosx is not provided by port xorg-libXau.
 DEBUG: Executing variant universal provides universal
 DEBUG: No need to upgrade! xorg-libXau 1.0.5_0 >= xorg-libXau 1.0.5_0
 DEBUG: No need to upgrade! xorg-libX11 1.3.2_0 >= xorg-libX11 1.3.2_0
 --->  Computing dependencies for xpm
 DEBUG: Searching for dependency: xorg-libX11
 DEBUG: Found Dependency: receipt exists for xorg-libX11
 DEBUG: Searching for dependency: pkgconfig
 DEBUG: Found Dependency: receipt exists for pkgconfig
 DEBUG: Searching for dependency: xorg-xproto
 DEBUG: Found Dependency: receipt exists for xorg-xproto
 DEBUG: Executing org.macports.main (xpm)
 DEBUG: Skipping completed org.macports.fetch (xpm)
 DEBUG: Skipping completed org.macports.checksum (xpm)
 DEBUG: setting option extract.cmd to /usr/bin/bzip2
 DEBUG: Skipping completed org.macports.extract (xpm)
 DEBUG: Skipping completed org.macports.patch (xpm)
 DEBUG: Skipping completed org.macports.configure (xpm)
 --->  Building xpm
 DEBUG: Executing org.macports.build (xpm)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xpm/work/libXpm-3.5.8"
 && /usr/bin/make -j2 all'
 /usr/bin/make  all-recursive
 Making all in src
 make[2]: Nothing to be done for `all'.
 Making all in sxpm
   CCLD   sxpm
 ld: warning: in /opt/local/lib/libXt.dylib, file is not of required
 architecture
 ld: warning: in /opt/local/lib/libSM.dylib, file is not of required
 architecture
 ld: warning: in /opt/local/lib/libICE.dylib, file is not of required
 architecture
 Undefined symbols for architecture i386:
   "_XtStrings", referenced from:
       _XtStrings$non_lazy_ptr in sxpm.o
   "_XtInitialize", referenced from:
       _main in sxpm.o
   "_XtMainLoop", referenced from:
       _main in sxpm.o
   "_XtRealizeWidget", referenced from:
       _main in sxpm.o
       _main in sxpm.o
   "_XtShellStrings", referenced from:
       _XtShellStrings$non_lazy_ptr in sxpm.o
   "_XtDatabase", referenced from:
       _main in sxpm.o
       _main in sxpm.o
       _main in sxpm.o
       _main in sxpm.o
       _main in sxpm.o
       _main in sxpm.o
   "_XtResizeWidget", referenced from:
       _main in sxpm.o
   "_XtSetLanguageProc", referenced from:
       _main in sxpm.o
   "_XtSetValues", referenced from:
       _main in sxpm.o
       _main in sxpm.o
   "_XtAddEventHandler", referenced from:
       _main in sxpm.o
   "_XtMalloc", referenced from:
       _main in sxpm.o
   "_XtFree", referenced from:
       _main in sxpm.o
 ld: symbol(s) not found for architecture i386
 collect2: ld returned 1 exit status
 lipo: can't open input file: /var/tmp//cc7kYAqQ.out (No such file or
 directory)
 make[2]: *** [sxpm] Error 1
 make[1]: *** [all-recursive] Error 1
 make: *** [all] Error 2
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xpm/work/libXpm-3.5.8"
 && /usr/bin/make -j2 all " returned error 2
 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xpm/work/libXpm-3.5.8"
 && /usr/bin/make -j2 all " returned error 2
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for xpm):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.
 To report a bug, see <http://guide.macports.org/#project.tickets>

-- 
Ticket URL: <http://trac.macports.org/ticket/23196>
MacPorts <http://www.macports.org/>
Ports system for Mac OS