#42074: port selfupdate failed ----------------------+-------------------------------- Reporter: kent@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: base | Version: 2.2.1 Resolution: invalid | Keywords: Port: | ----------------------+-------------------------------- Changes (by cal@…): * keywords: selfupdate => * resolution: => invalid * status: new => closed * component: ports => base Old description:
gwave-210:~ kent$ sudo port -d selfupdate DEBUG: Copying /Users/kent/Library/Preferences/com.apple.dt.Xcode.plist to /opt/local/var/macports/home/Library/Preferences DEBUG: MacPorts sources location: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs ---> Updating MacPorts base sources using rsync receiving file list ... done
sent 36 bytes received 69 bytes 210.00 bytes/sec total size is 4925440 speedup is 46908.95 receiving file list ... done
sent 36 bytes received 76 bytes 224.00 bytes/sec total size is 512 speedup is 4.57 DEBUG: successful verification with key /opt/local/share/macports /macports-pubkey.pem DEBUG: /usr/bin/tar -C /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/tmp -xf /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base.tar MacPorts base version 2.2.0 installed, DEBUG: Rebuilding and reinstalling MacPorts if needed MacPorts base version 2.2.1 downloaded. ---> Updating the ports tree Synchronizing local ports tree from rsync://rsync.macports.org/release/tarballs/ports.tar DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/ports.tar /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done
sent 36 bytes received 70 bytes 212.00 bytes/sec total size is 59064320 speedup is 557210.57 DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/ports.tar.rmd160 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done
sent 36 bytes received 77 bytes 226.00 bytes/sec total size is 512 speedup is 4.53 DEBUG: successful verification with key /opt/local/share/macports /macports-pubkey.pem DEBUG: /usr/bin/tar -C /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/tmp -xf /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports.tar DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/PortIndex_darwin_13_i386/PortIndex /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done
sent 36 bytes received 70 bytes 212.00 bytes/sec total size is 10196662 speedup is 96194.92 DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/PortIndex_darwin_13_i386/PortIndex.rmd160 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done
sent 36 bytes received 77 bytes 75.33 bytes/sec total size is 512 speedup is 4.53 DEBUG: successful verification with key /opt/local/share/macports /macports-pubkey.pem ---> MacPorts base is outdated, installing new version 2.2.1 DEBUG: Permissions OK Installing new MacPorts release in /opt/local as root:admin; permissions 0755; Tcl-Package in /Library/Tcl
checking build system type... x86_64-apple-darwin13.0.0 checking host system type... x86_64-apple-darwin13.0.0 checking target system type... x86_64-apple-darwin13.0.0 checking MacPorts version... 2.2.1 checking for sw_vers... /usr/bin/sw_vers checking for defaults... /usr/bin/defaults checking for xcode-select... /usr/bin/xcode-select checking Mac OS X version... 10.9.1 checking Xcode location... /Applications/Xcode.app/Contents/Developer checking Xcode version... 5.0.2 checking for gcc... /usr/bin/cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/cc accepts -g... yes checking for /usr/bin/cc option to accept ISO C89... none needed checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... yes checking whether we are using the GNU Objective C compiler... yes checking whether /usr/bin/cc accepts -g... yes checking for bsdmake... no checking for pmake... no checking for bzip2... /usr/bin/bzip2 checking for bzr... no checking for chown... /usr/sbin/chown checking for cp... /bin/cp checking for cpio... /usr/bin/cpio checking for cvs... /usr/bin/cvs checking for diff... /usr/bin/diff checking for dscl... /usr/bin/dscl checking for dseditgroup... /usr/sbin/dseditgroup checking for file... /usr/bin/file checking for find... /usr/bin/find checking for git... /usr/bin/git checking for gnumake... /usr/bin/gnumake checking for gnupatch... no checking for gpatch... no checking for gnutar... no checking for gtar... no checking for gzip... /usr/bin/gzip checking for hdiutil... /usr/bin/hdiutil checking for hg... no checking for launchctl... /bin/launchctl checking for lipo... /usr/bin/lipo checking for lsbom... /usr/bin/lsbom checking for lzma... no checking for make... /usr/bin/make checking for mdfind... /usr/bin/mdfind checking for mdls... /usr/bin/mdls checking for mkbom... /usr/bin/mkbom checking for mtree... /usr/sbin/mtree checking for open... /usr/bin/open checking for openssl... /usr/bin/openssl checking for patch... /usr/bin/patch checking for pax... /bin/pax checking for rmdir... /bin/rmdir checking for rsync... /usr/bin/rsync checking for sandbox-exec... /usr/bin/sandbox-exec checking for sed... /usr/bin/sed checking for svn... /usr/bin/svn checking for swig... no checking for tar... /usr/bin/tar checking for unzip... /usr/bin/unzip checking for xar... /usr/bin/xar checking for xcodebuild... /usr/bin/xcodebuild checking for xcrun... /usr/bin/xcrun checking for xz... no checking for zip... /usr/bin/zip checking for launchd... yes checking for sed... (cached) /usr/bin/sed checking which sed flag to use for extended regexp... -E (BSD) checking for tar... (cached) /usr/bin/tar checking whether tar supports -q... yes (bsdtar) checking for tar... (cached) /usr/bin/tar checking for gnutar... no checking for which tar variant to use... /usr/bin/tar checking for /usr/bin/tar --no-same-owner support... no checking for patch... (cached) /usr/bin/patch checking for gpatch... no checking for GNU (FSF) patch... /usr/bin/patch checking how to mark unused variables... checking for gcc symbol visibility attribute... __attribute__((visibility("hidden"))) checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... -D_THREAD_SAFE checking how to run the Objective C preprocessor... /usr/bin/cc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking objc/objc.h usability... yes checking objc/objc.h presence... yes checking for objc/objc.h... yes checking if linking libobjc requires pthreads... no checking for Apple Objective-C runtime... yes checking for GNU Objective C runtime... no configure: Using Apple Objective-C runtime checking for Apple Foundation library... yes configure: WARNING: GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library configure: Using Apple Foundation library checking for CoreFoundation framework... yes checking for SystemConfiguration framework... yes checking for IOKit framework... yes checking for CFNotificationCenterGetDarwinNotifyCenter... yes checking for whether we will build daemondo... yes checking for ports tree... /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports checking for MacPorts config directory... ${sysconfdir}/macports checking for install user... root checking for install group... admin checking for macports user... macports checking what permissions to use for installation directories... 0755 checking for Applications installation directory... /Applications/MacPorts checking for Frameworks installation directory... /opt/local/Library/Frameworks checking for Universal CPU architectures... x86_64 i386 checking how to run the C preprocessor... /usr/bin/cc -E checking for ANSI C header files... (cached) yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/wait.h that is POSIX.1 compatible... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking paths.h usability... yes checking paths.h presence... yes checking for paths.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking crt_externs.h usability... yes checking crt_externs.h presence... yes checking for crt_externs.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/fcntl.h usability... yes checking sys/fcntl.h presence... yes checking for sys/fcntl.h... yes checking sys/cdefs.h usability... yes checking sys/cdefs.h presence... yes checking for sys/cdefs.h... yes checking err.h usability... yes checking err.h presence... yes checking for err.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/sysctl.h usability... yes checking sys/sysctl.h presence... yes checking for sys/sysctl.h... yes checking readline/readline.h usability... yes checking readline/readline.h presence... yes checking for readline/readline.h... yes checking readline/history.h usability... yes checking readline/history.h presence... yes checking for readline/history.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking sys/paths.h usability... yes checking sys/paths.h presence... yes checking for sys/paths.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking for bzero... yes checking for memset... yes checking for fgetln... yes checking for lockf... yes checking for flock... yes checking for setmode... yes checking for strcasecmp... yes checking for strncasecmp... yes checking for strlcpy... yes checking for copyfile... yes checking for clearenv... no checking for sysctlbyname... yes checking if readlink conforms to POSIX 1003.1a... yes checking CommonCrypto/CommonDigest.h usability... yes checking CommonCrypto/CommonDigest.h presence... yes checking for CommonCrypto/CommonDigest.h... yes checking for readline in -lreadline... yes checking whether rl_username_completion_function is declared... no checking whether rl_filename_completion_function is declared... yes checking whether rl_completion_matches is declared... yes checking whether username_completion_function is declared... yes checking whether filename_completion_function is declared... yes checking whether completion_matches is declared... yes checking for Tcl configuration... configure: error: Can't find Tcl configuration definitions Command failed: cd /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base && CC=/usr/bin/cc OBJC=/usr/bin/cc ./configure --prefix=/opt/local --with-tclpackage=/Library/Tcl --with-install-user=root --with-install- group=admin --with-directory-mode=0755 --enable-readline && make SELFUPDATING=1 && make install SELFUPDATING=1 Exit code: 1 DEBUG: Error installing new MacPorts base: command execution failed while executing "macports::selfupdate [array get global_options] base_updated" Error: Error installing new MacPorts base: command execution failed To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: /opt/local/bin/port: port selfupdate failed: Error installing new MacPorts base: command execution failed gwave-210:~ kent$
New description: {{{ gwave-210:~ kent$ sudo port -d selfupdate DEBUG: Copying /Users/kent/Library/Preferences/com.apple.dt.Xcode.plist to /opt/local/var/macports/home/Library/Preferences DEBUG: MacPorts sources location: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs ---> Updating MacPorts base sources using rsync receiving file list ... done sent 36 bytes received 69 bytes 210.00 bytes/sec total size is 4925440 speedup is 46908.95 receiving file list ... done sent 36 bytes received 76 bytes 224.00 bytes/sec total size is 512 speedup is 4.57 DEBUG: successful verification with key /opt/local/share/macports /macports-pubkey.pem DEBUG: /usr/bin/tar -C /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/tmp -xf /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base.tar MacPorts base version 2.2.0 installed, DEBUG: Rebuilding and reinstalling MacPorts if needed MacPorts base version 2.2.1 downloaded. ---> Updating the ports tree Synchronizing local ports tree from rsync://rsync.macports.org/release/tarballs/ports.tar DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/ports.tar /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done sent 36 bytes received 70 bytes 212.00 bytes/sec total size is 59064320 speedup is 557210.57 DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/ports.tar.rmd160 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done sent 36 bytes received 77 bytes 226.00 bytes/sec total size is 512 speedup is 4.53 DEBUG: successful verification with key /opt/local/share/macports /macports-pubkey.pem DEBUG: /usr/bin/tar -C /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/tmp -xf /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports.tar DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/PortIndex_darwin_13_i386/PortIndex /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done sent 36 bytes received 70 bytes 212.00 bytes/sec total size is 10196662 speedup is 96194.92 DEBUG: /usr/bin/rsync -rtzv --delete-after rsync://rsync.macports.org/release/tarballs/PortIndex_darwin_13_i386/PortIndex.rmd160 /opt/local/var/macports/sources/rsync.macports.org/release/tarballs receiving file list ... done sent 36 bytes received 77 bytes 75.33 bytes/sec total size is 512 speedup is 4.53 DEBUG: successful verification with key /opt/local/share/macports /macports-pubkey.pem ---> MacPorts base is outdated, installing new version 2.2.1 DEBUG: Permissions OK Installing new MacPorts release in /opt/local as root:admin; permissions 0755; Tcl-Package in /Library/Tcl checking build system type... x86_64-apple-darwin13.0.0 checking host system type... x86_64-apple-darwin13.0.0 checking target system type... x86_64-apple-darwin13.0.0 checking MacPorts version... 2.2.1 checking for sw_vers... /usr/bin/sw_vers checking for defaults... /usr/bin/defaults checking for xcode-select... /usr/bin/xcode-select checking Mac OS X version... 10.9.1 checking Xcode location... /Applications/Xcode.app/Contents/Developer checking Xcode version... 5.0.2 checking for gcc... /usr/bin/cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/cc accepts -g... yes checking for /usr/bin/cc option to accept ISO C89... none needed checking for a BSD-compatible install... /usr/bin/install -c checking whether ln -s works... yes checking whether make sets $(MAKE)... yes checking whether we are using the GNU Objective C compiler... yes checking whether /usr/bin/cc accepts -g... yes checking for bsdmake... no checking for pmake... no checking for bzip2... /usr/bin/bzip2 checking for bzr... no checking for chown... /usr/sbin/chown checking for cp... /bin/cp checking for cpio... /usr/bin/cpio checking for cvs... /usr/bin/cvs checking for diff... /usr/bin/diff checking for dscl... /usr/bin/dscl checking for dseditgroup... /usr/sbin/dseditgroup checking for file... /usr/bin/file checking for find... /usr/bin/find checking for git... /usr/bin/git checking for gnumake... /usr/bin/gnumake checking for gnupatch... no checking for gpatch... no checking for gnutar... no checking for gtar... no checking for gzip... /usr/bin/gzip checking for hdiutil... /usr/bin/hdiutil checking for hg... no checking for launchctl... /bin/launchctl checking for lipo... /usr/bin/lipo checking for lsbom... /usr/bin/lsbom checking for lzma... no checking for make... /usr/bin/make checking for mdfind... /usr/bin/mdfind checking for mdls... /usr/bin/mdls checking for mkbom... /usr/bin/mkbom checking for mtree... /usr/sbin/mtree checking for open... /usr/bin/open checking for openssl... /usr/bin/openssl checking for patch... /usr/bin/patch checking for pax... /bin/pax checking for rmdir... /bin/rmdir checking for rsync... /usr/bin/rsync checking for sandbox-exec... /usr/bin/sandbox-exec checking for sed... /usr/bin/sed checking for svn... /usr/bin/svn checking for swig... no checking for tar... /usr/bin/tar checking for unzip... /usr/bin/unzip checking for xar... /usr/bin/xar checking for xcodebuild... /usr/bin/xcodebuild checking for xcrun... /usr/bin/xcrun checking for xz... no checking for zip... /usr/bin/zip checking for launchd... yes checking for sed... (cached) /usr/bin/sed checking which sed flag to use for extended regexp... -E (BSD) checking for tar... (cached) /usr/bin/tar checking whether tar supports -q... yes (bsdtar) checking for tar... (cached) /usr/bin/tar checking for gnutar... no checking for which tar variant to use... /usr/bin/tar checking for /usr/bin/tar --no-same-owner support... no checking for patch... (cached) /usr/bin/patch checking for gpatch... no checking for GNU (FSF) patch... /usr/bin/patch checking how to mark unused variables... checking for gcc symbol visibility attribute... __attribute__((visibility("hidden"))) checking for the pthreads library -lpthreads... no checking whether pthreads work without any flags... yes checking for joinable pthread attribute... PTHREAD_CREATE_JOINABLE checking if more special flags are required for pthreads... -D_THREAD_SAFE checking how to run the Objective C preprocessor... /usr/bin/cc -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking objc/objc.h usability... yes checking objc/objc.h presence... yes checking for objc/objc.h... yes checking if linking libobjc requires pthreads... no checking for Apple Objective-C runtime... yes checking for GNU Objective C runtime... no configure: Using Apple Objective-C runtime checking for Apple Foundation library... yes configure: WARNING: GNUSTEP_SYSTEM_ROOT is not defined in your environment, preventing the use of GNUstep's Foundation library configure: Using Apple Foundation library checking for CoreFoundation framework... yes checking for SystemConfiguration framework... yes checking for IOKit framework... yes checking for CFNotificationCenterGetDarwinNotifyCenter... yes checking for whether we will build daemondo... yes checking for ports tree... /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports checking for MacPorts config directory... ${sysconfdir}/macports checking for install user... root checking for install group... admin checking for macports user... macports checking what permissions to use for installation directories... 0755 checking for Applications installation directory... /Applications/MacPorts checking for Frameworks installation directory... /opt/local/Library/Frameworks checking for Universal CPU architectures... x86_64 i386 checking how to run the C preprocessor... /usr/bin/cc -E checking for ANSI C header files... (cached) yes checking for dirent.h that defines DIR... yes checking for library containing opendir... none required checking for sys/wait.h that is POSIX.1 compatible... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking paths.h usability... yes checking paths.h presence... yes checking for paths.h... yes checking sys/file.h usability... yes checking sys/file.h presence... yes checking for sys/file.h... yes checking crt_externs.h usability... yes checking crt_externs.h presence... yes checking for crt_externs.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking sys/fcntl.h usability... yes checking sys/fcntl.h presence... yes checking for sys/fcntl.h... yes checking sys/cdefs.h usability... yes checking sys/cdefs.h presence... yes checking for sys/cdefs.h... yes checking err.h usability... yes checking err.h presence... yes checking for err.h... yes checking sys/socket.h usability... yes checking sys/socket.h presence... yes checking for sys/socket.h... yes checking sys/sysctl.h usability... yes checking sys/sysctl.h presence... yes checking for sys/sysctl.h... yes checking readline/readline.h usability... yes checking readline/readline.h presence... yes checking for readline/readline.h... yes checking readline/history.h usability... yes checking readline/history.h presence... yes checking for readline/history.h... yes checking pwd.h usability... yes checking pwd.h presence... yes checking for pwd.h... yes checking sys/paths.h usability... yes checking sys/paths.h presence... yes checking for sys/paths.h... yes checking utime.h usability... yes checking utime.h presence... yes checking for utime.h... yes checking for bzero... yes checking for memset... yes checking for fgetln... yes checking for lockf... yes checking for flock... yes checking for setmode... yes checking for strcasecmp... yes checking for strncasecmp... yes checking for strlcpy... yes checking for copyfile... yes checking for clearenv... no checking for sysctlbyname... yes checking if readlink conforms to POSIX 1003.1a... yes checking CommonCrypto/CommonDigest.h usability... yes checking CommonCrypto/CommonDigest.h presence... yes checking for CommonCrypto/CommonDigest.h... yes checking for readline in -lreadline... yes checking whether rl_username_completion_function is declared... no checking whether rl_filename_completion_function is declared... yes checking whether rl_completion_matches is declared... yes checking whether username_completion_function is declared... yes checking whether filename_completion_function is declared... yes checking whether completion_matches is declared... yes checking for Tcl configuration... configure: error: Can't find Tcl configuration definitions Command failed: cd /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base && CC=/usr/bin/cc OBJC=/usr/bin/cc ./configure --prefix=/opt/local --with- tclpackage=/Library/Tcl --with-install-user=root --with-install- group=admin --with-directory-mode=0755 --enable-readline && make SELFUPDATING=1 && make install SELFUPDATING=1 Exit code: 1 DEBUG: Error installing new MacPorts base: command execution failed while executing "macports::selfupdate [array get global_options] base_updated" Error: Error installing new MacPorts base: command execution failed To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: /opt/local/bin/port: port selfupdate failed: Error installing new MacPorts base: command execution failed gwave-210:~ kent$ }}} -- Comment: Please use WikiFormatting and remember to preview your post. You don't have the Xcode Command Line Tools installed. Please run `xcode-select --install` and install them. This is not a bug. Trac is for bug reports only, use the macports-users mailing list for tech support if you have further questions. -- Ticket URL: <https://trac.macports.org/ticket/42074#comment:1> MacPorts <http://www.macports.org/> Ports system for OS X