#21756: poppler, gd2, gtk - build failure on Snow Leopard, breaks libXdmcp ----------------------------------+----------------------------------------- Reporter: macwright@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Resolution: invalid | Keywords: Port: | ----------------------------------+----------------------------------------- Changes (by jmr@…): * status: new => closed * resolution: => invalid Old description:
Hi, was using gnuplot, tried to install poppler, poppler build failed and broke gnuplot. Sordid tale below.
(building poppler)
{{{~/Scratch/pdf % sudo port install poppler ---> Computing dependencies for libpixman ---> Fetching libpixman ---> Attempting to fetch pixman-0.16.0.tar.bz2 from http://xorg.freedesktop.org/archive/individual/lib/ ---> Verifying checksum(s) for libpixman ---> Extracting libpixman ---> Configuring libpixman ---> Building libpixman ---> Staging libpixman into destroot ---> Deactivating libpixman @0.14.0_0 ---> Computing dependencies for libpixman ---> Installing libpixman @0.16.0_0 ---> Activating libpixman @0.16.0_0 ---> Cleaning libpixman ---> Computing dependencies for xorg-util-macros ---> Fetching xorg-util-macros ---> Attempting to fetch util-macros-1.3.0.tar.bz2 from http://distfiles.macports.org/xorg-util-macros ---> Verifying checksum(s) for xorg-util-macros ---> Extracting xorg-util-macros ---> Configuring xorg-util-macros ---> Building xorg-util-macros ---> Staging xorg-util-macros into destroot ---> Deactivating xorg-util-macros @1.2.2_0 ---> Computing dependencies for xorg-util-macros ---> Installing xorg-util-macros @1.3.0_0 ---> Activating xorg-util-macros @1.3.0_0 ---> Cleaning xorg-util-macros Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for xorg-xproto ---> Fetching xorg-xproto ---> Attempting to fetch xproto-7.0.16.tar.bz2 from http://distfiles.macports.org/xorg-xproto ---> Verifying checksum(s) for xorg-xproto ---> Extracting xorg-xproto ---> Configuring xorg-xproto ---> Building xorg-xproto ---> Staging xorg-xproto into destroot ---> Deactivating xorg-xproto @7.0.15_0 ---> Computing dependencies for xorg-xproto ---> Installing xorg-xproto @7.0.16_0 ---> Activating xorg-xproto @7.0.16_0 ---> Cleaning xorg-xproto ---> Computing dependencies for xorg-libXdmcp ---> Fetching xorg-libXdmcp ---> Attempting to fetch libXdmcp-1.0.3.tar.bz2 from http://distfiles.macports.org/xorg-libXdmcp ---> Verifying checksum(s) for xorg-libXdmcp ---> Extracting xorg-libXdmcp ---> Configuring xorg-libXdmcp ---> Building xorg-libXdmcp ---> Staging xorg-libXdmcp into destroot ---> Deactivating xorg-libXdmcp @1.0.2_1 ---> Computing dependencies for xorg-libXdmcp ---> Installing xorg-libXdmcp @1.0.3_0 ---> Activating xorg-libXdmcp @1.0.3_0 ---> Cleaning xorg-libXdmcp ---> Computing dependencies for python_select ---> Fetching python_select ---> Attempting to fetch select-0.3.tar.gz from http://distfiles.macports.org/python_select ---> Verifying checksum(s) for python_select ---> Extracting python_select ---> Configuring python_select ---> Building python_select ---> Staging python_select into destroot ---> Deactivating python_select @0.2.1_0+darwin_9 ---> Computing dependencies for python_select ---> Installing python_select @0.3_0+darwin_10 ---> Activating python_select @0.3_0+darwin_10 ---> Cleaning python_select ---> Computing dependencies for glib2 ---> Fetching glib2 ---> Attempting to fetch glib-2.20.5.tar.bz2 from ftp://ftp.gtk.org/pub/glib/2.20/ ---> Verifying checksum(s) for glib2 ---> Extracting glib2 ---> Applying patches to glib2 ---> Configuring glib2 Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_glib2/work/glib-2.20.5" && ./configure --prefix=/opt/local --enable-static " returned error 1 Command output: checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3 checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E checking for c++... /usr/bin/g++-4.2 checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++-4.2 accepts -g... yes checking dependency style of /usr/bin/g++-4.2... gcc3 checking for gcc... (cached) /usr/bin/gcc-4.2 checking whether we are using the GNU C compiler... (cached) yes checking whether /usr/bin/gcc-4.2 accepts -g... (cached) yes checking for /usr/bin/gcc-4.2 option to accept ISO C89... (cached) none needed checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3 checking whether /usr/bin/gcc-4.2 and cc understand -c and -o together... yes checking for a BSD-compatible install... /usr/bin/install -c checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for pkg-config... /opt/local/bin/pkg-config checking for gawk... (cached) gawk checking for perl5... /opt/local/bin/perl checking for indent... indent checking for /opt/local/bin/perl... /opt/local/bin/perl checking for a Python interpreter with version >= 2.4... python checking for python... /opt/local/bin/python checking for python version... 2.6 checking for python platform... darwin checking for python script directory... ${prefix}/lib/python2.6/site- packages checking for python extension module directory... ${exec_prefix}/lib/python2.6/site-packages checking for iconv_open... no checking for libiconv_open in -liconv... no checking for iconv_open in -liconv... no configure: error: *** No iconv() implementation found in C library or libiconv
Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade gtk2 failed}}}
Trying to use gnuplot
{{{~/DS/diagrams % gnuplot ec2_small_cost.plt dyld: Library not loaded: /opt/local/lib/libXdmcp.6.dylib Referenced from: /opt/local/lib/libgd.2.dylib Reason: no suitable image found. Did find: /opt/local/lib/libXdmcp.6.dylib: mach-o, but wrong architecture zsh: trace trap gnuplot ec2_small_cost.plt}}}
Trying to install gnuplot
{{{~/DS/diagrams % sudo port install gnuplot Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for xpm ---> Fetching xpm ---> Verifying checksum(s) for xpm ---> Extracting xpm ---> Configuring xpm ---> Building xpm Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xpm/work/libXpm-3.5.7" && /usr/bin/make -j2 all " returned error 2 Command output: _xpmParseDataAndCreate in create.o "_XAllocColor", referenced from: _AllocColor in create.o "_XDefaultVisual", referenced from: _CreateColors in create.o _CreateColors in create.o _XpmCreateImageFromXpmImage in create.o _XpmCreateImageFromXpmImage in create.o _xpmParseDataAndCreate in create.o _xpmParseDataAndCreate in create.o "_XQueryColors", referenced from: _SetColor in create.o _SetColor in create.o _CreateColors in create.o _XpmCreateXpmImageFromImage in scan.o "_XParseColor", referenced from: _AllocColor in create.o "_XFreeGC", referenced from: _xpmCreatePixmapFromImage in CrPFrI.o "_XGetGeometry", referenced from: _xpmCreateImageFromPixmap in CrIFrP.o "_XCreatePixmap", referenced from: _xpmCreatePixmapFromImage in CrPFrI.o "_XCreateGC", referenced from: _xpmCreatePixmapFromImage in CrPFrI.o ld: symbol(s) not found collect2: ld returned 1 exit status make[2]: *** [libXpm.la] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2
Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade gd2 failed}}}
New description: Hi, was using gnuplot, tried to install poppler, poppler build failed and broke gnuplot. Sordid tale below. (building poppler) {{{ ~/Scratch/pdf % sudo port install poppler ---> Computing dependencies for libpixman ---> Fetching libpixman ---> Attempting to fetch pixman-0.16.0.tar.bz2 from http://xorg.freedesktop.org/archive/individual/lib/ ---> Verifying checksum(s) for libpixman ---> Extracting libpixman ---> Configuring libpixman ---> Building libpixman ---> Staging libpixman into destroot ---> Deactivating libpixman @0.14.0_0 ---> Computing dependencies for libpixman ---> Installing libpixman @0.16.0_0 ---> Activating libpixman @0.16.0_0 ---> Cleaning libpixman ---> Computing dependencies for xorg-util-macros ---> Fetching xorg-util-macros ---> Attempting to fetch util-macros-1.3.0.tar.bz2 from http://distfiles.macports.org/xorg-util-macros ---> Verifying checksum(s) for xorg-util-macros ---> Extracting xorg-util-macros ---> Configuring xorg-util-macros ---> Building xorg-util-macros ---> Staging xorg-util-macros into destroot ---> Deactivating xorg-util-macros @1.2.2_0 ---> Computing dependencies for xorg-util-macros ---> Installing xorg-util-macros @1.3.0_0 ---> Activating xorg-util-macros @1.3.0_0 ---> Cleaning xorg-util-macros Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for xorg-xproto ---> Fetching xorg-xproto ---> Attempting to fetch xproto-7.0.16.tar.bz2 from http://distfiles.macports.org/xorg-xproto ---> Verifying checksum(s) for xorg-xproto ---> Extracting xorg-xproto ---> Configuring xorg-xproto ---> Building xorg-xproto ---> Staging xorg-xproto into destroot ---> Deactivating xorg-xproto @7.0.15_0 ---> Computing dependencies for xorg-xproto ---> Installing xorg-xproto @7.0.16_0 ---> Activating xorg-xproto @7.0.16_0 ---> Cleaning xorg-xproto ---> Computing dependencies for xorg-libXdmcp ---> Fetching xorg-libXdmcp ---> Attempting to fetch libXdmcp-1.0.3.tar.bz2 from http://distfiles.macports.org/xorg-libXdmcp ---> Verifying checksum(s) for xorg-libXdmcp ---> Extracting xorg-libXdmcp ---> Configuring xorg-libXdmcp ---> Building xorg-libXdmcp ---> Staging xorg-libXdmcp into destroot ---> Deactivating xorg-libXdmcp @1.0.2_1 ---> Computing dependencies for xorg-libXdmcp ---> Installing xorg-libXdmcp @1.0.3_0 ---> Activating xorg-libXdmcp @1.0.3_0 ---> Cleaning xorg-libXdmcp ---> Computing dependencies for python_select ---> Fetching python_select ---> Attempting to fetch select-0.3.tar.gz from http://distfiles.macports.org/python_select ---> Verifying checksum(s) for python_select ---> Extracting python_select ---> Configuring python_select ---> Building python_select ---> Staging python_select into destroot ---> Deactivating python_select @0.2.1_0+darwin_9 ---> Computing dependencies for python_select ---> Installing python_select @0.3_0+darwin_10 ---> Activating python_select @0.3_0+darwin_10 ---> Cleaning python_select ---> Computing dependencies for glib2 ---> Fetching glib2 ---> Attempting to fetch glib-2.20.5.tar.bz2 from ftp://ftp.gtk.org/pub/glib/2.20/ ---> Verifying checksum(s) for glib2 ---> Extracting glib2 ---> Applying patches to glib2 ---> Configuring glib2 Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_glib2/work/glib-2.20.5" && ./configure --prefix=/opt/local --enable-static " returned error 1 Command output: checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3 checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E checking for c++... /usr/bin/g++-4.2 checking whether we are using the GNU C++ compiler... yes checking whether /usr/bin/g++-4.2 accepts -g... yes checking dependency style of /usr/bin/g++-4.2... gcc3 checking for gcc... (cached) /usr/bin/gcc-4.2 checking whether we are using the GNU C compiler... (cached) yes checking whether /usr/bin/gcc-4.2 accepts -g... (cached) yes checking for /usr/bin/gcc-4.2 option to accept ISO C89... (cached) none needed checking dependency style of /usr/bin/gcc-4.2... (cached) gcc3 checking whether /usr/bin/gcc-4.2 and cc understand -c and -o together... yes checking for a BSD-compatible install... /usr/bin/install -c checking for special C compiler options needed for large files... no checking for _FILE_OFFSET_BITS value needed for large files... no checking for pkg-config... /opt/local/bin/pkg-config checking for gawk... (cached) gawk checking for perl5... /opt/local/bin/perl checking for indent... indent checking for /opt/local/bin/perl... /opt/local/bin/perl checking for a Python interpreter with version >= 2.4... python checking for python... /opt/local/bin/python checking for python version... 2.6 checking for python platform... darwin checking for python script directory... ${prefix}/lib/python2.6/site- packages checking for python extension module directory... ${exec_prefix}/lib/python2.6/site-packages checking for iconv_open... no checking for libiconv_open in -liconv... no checking for iconv_open in -liconv... no configure: error: *** No iconv() implementation found in C library or libiconv Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade gtk2 failed }}} Trying to use gnuplot {{{ ~/DS/diagrams % gnuplot ec2_small_cost.plt dyld: Library not loaded: /opt/local/lib/libXdmcp.6.dylib Referenced from: /opt/local/lib/libgd.2.dylib Reason: no suitable image found. Did find: /opt/local/lib/libXdmcp.6.dylib: mach-o, but wrong architecture zsh: trace trap gnuplot ec2_small_cost.plt }}} Trying to install gnuplot {{{ ~/DS/diagrams % sudo port install gnuplot Warning: Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. Warning: Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even though installed variants "" do not match "+darwin_10". Use 'upgrade --enforce-variants' to switch to the requested variants. ---> Computing dependencies for xpm ---> Fetching xpm ---> Verifying checksum(s) for xpm ---> Extracting xpm ---> Configuring xpm ---> Building xpm Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_xpm/work/libXpm-3.5.7" && /usr/bin/make -j2 all " returned error 2 Command output: _xpmParseDataAndCreate in create.o "_XAllocColor", referenced from: _AllocColor in create.o "_XDefaultVisual", referenced from: _CreateColors in create.o _CreateColors in create.o _XpmCreateImageFromXpmImage in create.o _XpmCreateImageFromXpmImage in create.o _xpmParseDataAndCreate in create.o _xpmParseDataAndCreate in create.o "_XQueryColors", referenced from: _SetColor in create.o _SetColor in create.o _CreateColors in create.o _XpmCreateXpmImageFromImage in scan.o "_XParseColor", referenced from: _AllocColor in create.o "_XFreeGC", referenced from: _xpmCreatePixmapFromImage in CrPFrI.o "_XGetGeometry", referenced from: _xpmCreateImageFromPixmap in CrIFrP.o "_XCreatePixmap", referenced from: _xpmCreatePixmapFromImage in CrPFrI.o "_XCreateGC", referenced from: _xpmCreatePixmapFromImage in CrPFrI.o ld: symbol(s) not found collect2: ld returned 1 exit status make[2]: *** [libXpm.la] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Unable to upgrade port: 1 Error: Unable to execute port: upgrade gd2 failed }}} -- Comment: http://trac.macports.org/wiki/FAQ#migration -- Ticket URL: <http://trac.macports.org/ticket/21756#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS