#31212: pkgconfig 0.26 checksum ------------------------------------------+--------------------------------- Reporter: francescoagnoletto@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: pkgconfig ------------------------------------------+--------------------------------- I'm trying to install imagemagick on OSX 10.7 The problem on i'm blocked is on pkgconfig sudo port checksum pkgconfig ---> Fetching pkgconfig ---> Attempting to fetch pkg-config-0.26.tar.gz from http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/ ---> Verifying checksum(s) for pkgconfig Error: Checksum (sha1) mismatch for pkg-config-0.26.tar.gz Error: Checksum (rmd160) mismatch for pkg-config-0.26.tar.gz *** The non-matching file appears to be HTML. See this page for possible reasons for the checksum mismatch: <https://trac.macports.org/wiki/MisbehavingServers> *** Error: Target org.macports.checksum returned: Unable to verify file checksums Log for pkgconfig is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> This is the entire log: $ sudo port -d install pkgconfig DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig/work DEBUG: changing euid/egid - current euid: 0 - current egid: 0 DEBUG: egid changed to: 501 DEBUG: euid changed to: 502 DEBUG: Starting logging for pkgconfig DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glib2 2.28.8_0 exists in the ports tree DEBUG: glib2 2.28.8_0 is the latest installed DEBUG: glib2 2.28.8_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/glib2 DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! glib2 2.28.8_0 >= glib2 2.28.8_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_2 exists in the ports tree DEBUG: gettext 0.18.1.1_2 is the latest installed DEBUG: gettext 0.18.1.1_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.14_0 exists in the ports tree DEBUG: libiconv 1.14_0 is the latest installed DEBUG: libiconv 1.14_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.9_1 exists in the ports tree DEBUG: ncurses 5.9_1 is the latest installed DEBUG: ncurses 5.9_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_1 exists in the ports tree DEBUG: expat 2.0.1_1 is the latest installed DEBUG: expat 2.0.1_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.5_0 exists in the ports tree DEBUG: zlib 1.2.5_0 is the latest installed DEBUG: zlib 1.2.5_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.12.3_1 exists in the ports tree DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed DEBUG: perl5 5.12.3_1 +perl5_12 is active DEBUG: Merging existing variants '+perl5_12' into variants DEBUG: new fully merged portvariants: perl5_12 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Executing variant perl5_12 provides perl5_12 DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.12 5.12.3_2 exists in the ports tree DEBUG: perl5.12 5.12.3_2 is the latest installed DEBUG: perl5.12 5.12.3_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! perl5.12 5.12.3_2 >= perl5.12 5.12.3_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.9.1_0 exists in the ports tree DEBUG: gdbm 1.9.1_0 is the latest installed DEBUG: gdbm 1.9.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm DEBUG: OS darwin/11.1.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gdbm 1.9.1_0 >= gdbm 1.9.1_0 ---> Computing dependencies for pkgconfig DEBUG: Searching for dependency: glib2 DEBUG: Found Dependency: receipt exists for glib2 DEBUG: Executing org.macports.main (pkgconfig) DEBUG: changing euid/egid - current euid: 0 - current egid: 0 DEBUG: egid changed to: 501 DEBUG: euid changed to: 502 DEBUG: archivefetch phase started at Sun Sep 11 00:24:01 CEST 2011 ---> Fetching archive for pkgconfig DEBUG: Executing org.macports.archivefetch (pkgconfig) DEBUG: euid/egid changed to: 0/0 DEBUG: chowned /opt/local/var/macports/software/pkgconfig to macports DEBUG: euid/egid changed to: 502/501 DEBUG: euid/egid changed to: 0/0 DEBUG: chowned /opt/local/var/macports/incoming to macports DEBUG: euid/egid changed to: 502/501 ---> pkgconfig-0.26_0.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/pkgconfig ---> Attempting to fetch pkgconfig-0.26_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/pkgconfig % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 DEBUG: Fetching archive failed:: The requested URL returned error: 404 DEBUG: Privilege de-escalation not attempted as not running as root. DEBUG: fetch phase started at Sun Sep 11 00:24:02 CEST 2011 ---> Fetching pkgconfig DEBUG: Can't run fetch on this port without elevated privileges. Escalating privileges back to root. DEBUG: euid changed to: 0. egid changed to: 0. DEBUG: changing euid/egid - current euid: 0 - current egid: 0 DEBUG: egid changed to: 501 DEBUG: euid changed to: 502 DEBUG: Executing org.macports.fetch (pkgconfig) ---> pkg-config-0.26.tar.gz doesn't seem to exist in /opt/local/var/macports/distfiles/pkgconfig DEBUG: Pinging pkg-config.freedesktop.org... DEBUG: Pinging www.vg.kernel.org... DEBUG: Pinging distfiles.macports.org... DEBUG: Pinging aarnet.au.distfiles.macports.org... DEBUG: Pinging her.gr.distfiles.macports.org... DEBUG: Pinging lil.fr.distfiles.macports.org... DEBUG: Pinging sea.us.distfiles.macports.org... DEBUG: Pinging ykf.ca.distfiles.macports.org... DEBUG: pkg-config.freedesktop.org ping time is 247.217 DEBUG: www.vg.kernel.org ping time is 82.122 DEBUG: distfiles.macports.org ping time is 239.466 DEBUG: aarnet.au.distfiles.macports.org ping time is 388.000 DEBUG: her.gr.distfiles.macports.org ping time is 138.807 DEBUG: lil.fr.distfiles.macports.org ping time is 89.335 DEBUG: sea.us.distfiles.macports.org ping time is 10000 DEBUG: ykf.ca.distfiles.macports.org ping time is 173.056 ---> Attempting to fetch pkg-config-0.26.tar.gz from http://www.vg.kernel.org/pub/mirrors/gentoo/source/distfiles/ % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 1499 0 0 432 0 --:--:-- 0:00:03 --:--:-- 432 DEBUG: Privilege de-escalation not attempted as not running as root. DEBUG: checksum phase started at Sun Sep 11 00:24:08 CEST 2011 ---> Verifying checksum(s) for pkgconfig DEBUG: Executing org.macports.checksum (pkgconfig) ---> Checksumming pkg-config-0.26.tar.gz Error: Checksum (sha1) mismatch for pkg-config-0.26.tar.gz Portfile checksum: pkg-config-0.26.tar.gz sha1 fd71a70b023b9087c8a7bb76a0dc135a61059652 Distfile checksum: pkg-config-0.26.tar.gz sha1 e48526ac51650ed4027a54866d15d54ad644e3ae Error: Checksum (rmd160) mismatch for pkg-config-0.26.tar.gz Portfile checksum: pkg-config-0.26.tar.gz rmd160 face3d16ec338b9b1ab41d56d6e4d1a5624b52d0 Distfile checksum: pkg-config-0.26.tar.gz rmd160 cc60fdc76a773e3765105359dfd77b9b3ca6dab6 The correct checksum line may be: checksums sha1 e48526ac51650ed4027a54866d15d54ad644e3ae \ rmd160 cc60fdc76a773e3765105359dfd77b9b3ca6dab6 *** The non-matching file appears to be HTML. See this page for possible reasons for the checksum mismatch: <https://trac.macports.org/wiki/MisbehavingServers> *** Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for pkgconfig): org.macports.activate org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Log for pkgconfig is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_pkgconfig/pkgconfig/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> -- Ticket URL: <https://trac.macports.org/ticket/31212> MacPorts <http://www.macports.org/> Ports system for Mac OS