#28921: rancid: can't figure out how to pass count == 1 to /sbin/ping -----------------------------------+---------------------------------------- Reporter: shain.singh@… | Owner: markd@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: rancid -----------------------------------+---------------------------------------- Changes (by ryandesign@…): * keywords: rancid compile error => * owner: macports-tickets@… => markd@… Old description:
[shsingh@bhima]:shsingh$ sudo port -dv install rancid DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rancid DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Starting logging for rancid DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.12.3_1 exists in the ports tree DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed DEBUG: perl5 5.12.3_1 +perl5_12 is active DEBUG: Merging existing variants '+perl5_12' into variants DEBUG: new fully merged portvariants: perl5_12 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Executing variant perl5_12 provides perl5_12 DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.12 5.12.3_1 exists in the ports tree DEBUG: perl5.12 5.12.3_1 is the latest installed DEBUG: perl5.12 5.12.3_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 1.0.0d_0 exists in the ports tree DEBUG: openssl 1.0.0d_0 +universal is the latest installed DEBUG: openssl 1.0.0d_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.5_0 exists in the ports tree DEBUG: zlib 1.2.5_0 +universal is the latest installed DEBUG: zlib 1.2.5_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-lockfile-simple 0.2.5_1 exists in the ports tree DEBUG: p5-lockfile-simple 0.2.5_1 is the latest installed DEBUG: p5-lockfile-simple 0.2.5_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -lockfile-simple DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: Re-registering default for configure.universal_args DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! p5-lockfile-simple 0.2.5_1 >= p5-lockfile- simple 0.2.5_1 ---> Computing dependencies for rancid DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: p5-lockfile-simple DEBUG: Found Dependency: receipt exists for p5-lockfile-simple DEBUG: Executing org.macports.main (rancid) DEBUG: Skipping completed org.macports.fetch (rancid) DEBUG: Skipping completed org.macports.checksum (rancid) DEBUG: Skipping completed org.macports.extract (rancid) DEBUG: Skipping completed org.macports.patch (rancid) ---> Configuring rancid DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: configure phase started at Sun Mar 27 15:56:29 EST 2011 DEBUG: Executing org.macports.configure (rancid) DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4" && ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid --bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid --mandir=\${prefix}/share/man' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gmake... no checking for make... /usr/bin/make checking whether /usr/bin/make sets $(MAKE)... yes checking for gcc... /usr/bin/gcc-4.2 checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.2 accepts -g... yes checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed checking for style of include used by /usr/bin/make... GNU checking dependency style of /usr/bin/gcc-4.2... gcc3 checking for function prototypes... yes checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for string.h... (cached) yes checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E checking for an ANSI C-conforming const... yes checking for inline... inline checking for preprocessor stringizing operator... yes checking for ANSI C header files... (cached) yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking pty.h usability... no checking pty.h presence... no checking for pty.h... no checking malloc.h usability... no checking malloc.h presence... no checking for malloc.h... no checking for memory.h... (cached) yes checking siginfo.h usability... no checking siginfo.h presence... no checking for siginfo.h... no checking for string.h... (cached) yes checking for strings.h... (cached) yes checking stropts.h usability... no checking stropts.h presence... no checking for stropts.h... no checking for sys/types.h... (cached) yes checking sys/wait.h usability... yes checking sys/wait.h presence... yes checking for sys/wait.h... yes checking for unistd.h... (cached) yes checking util.h usability... yes checking util.h presence... yes checking for util.h... yes checking sysexits.h usability... yes checking sysexits.h presence... yes checking for sysexits.h... yes checking for memcpy... yes checking for memmove... yes checking for memset... yes checking for strerror... yes checking for strchr... yes checking for strrchr... yes checking for strstr... yes checking for strtok... yes checking for strrtok... no checking for index... yes checking for rindex... yes checking for unsetenv... yes checking for openpty... yes checking return type of signal handlers... void checking for size_t... yes checking whether to create the local state directory at install time... yes checking whether to install sample .conf files in sysconfdir... yes checking whether subversion... no checking whether mail addresses should be in the rancid+ form... no checking whether admin mail addresses should be in the rancid-admin+ form... rancid-admin- checking for dirname... /usr/bin/dirname checking for a diff(1) that supports -u... diff -U 4 checking for sendmail... /usr/sbin/sendmail checking for gnutar... gnutar checking for automake... ${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4/missing --run automake-1.11 checking for perl5... /opt/local/bin/perl5 checking for expect... /usr/bin/expect checking for ping... /sbin/ping configure: error: can't figure out how to pass count == 1 to /sbin/ping. shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4" && ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid --bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid --mandir=\${prefix}/share/man " returned error 1 Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) DEBUG: Backtrace: configure failure: shell command failed (see log for details) while executing "$procedure $targetname" Warning: the following items did not execute (for rancid): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Log for rancid is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets>
New description: {{{ [shsingh@bhima]:shsingh$ sudo port -dv install rancid DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rancid DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Starting logging for rancid DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.12.3_1 exists in the ports tree DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed DEBUG: perl5 5.12.3_1 +perl5_12 is active DEBUG: Merging existing variants '+perl5_12' into variants DEBUG: new fully merged portvariants: perl5_12 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Executing variant perl5_12 provides perl5_12 DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.12 5.12.3_1 exists in the ports tree DEBUG: perl5.12 5.12.3_1 is the latest installed DEBUG: perl5.12 5.12.3_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.12 DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! perl5.12 5.12.3_1 >= perl5.12 5.12.3_1 DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 1.0.0d_0 exists in the ports tree DEBUG: openssl 1.0.0d_0 +universal is the latest installed DEBUG: openssl 1.0.0d_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.5_0 exists in the ports tree DEBUG: zlib 1.2.5_0 +universal is the latest installed DEBUG: zlib 1.2.5_0 +universal is active DEBUG: Merging existing variants '+universal' into variants DEBUG: new fully merged portvariants: universal + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant universal provides universal DEBUG: No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-lockfile-simple 0.2.5_1 exists in the ports tree DEBUG: p5-lockfile-simple 0.2.5_1 is the latest installed DEBUG: p5-lockfile-simple 0.2.5_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -lockfile-simple DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: Re-registering default for configure.universal_args DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! p5-lockfile-simple 0.2.5_1 >= p5-lockfile- simple 0.2.5_1 ---> Computing dependencies for rancid DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: p5-lockfile-simple DEBUG: Found Dependency: receipt exists for p5-lockfile-simple DEBUG: Executing org.macports.main (rancid) DEBUG: Skipping completed org.macports.fetch (rancid) DEBUG: Skipping completed org.macports.checksum (rancid) DEBUG: Skipping completed org.macports.extract (rancid) DEBUG: Skipping completed org.macports.patch (rancid) ---> Configuring rancid DEBUG: Using compiler 'Mac OS X gcc 4.2' DEBUG: configure phase started at Sun Mar 27 15:56:29 EST 2011 DEBUG: Executing org.macports.configure (rancid) DEBUG: Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMENT_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' OBJC='/usr/bin/gcc-4.2' FCFLAGS='-pipe -O2 -m64' INSTALL='/usr/bin/install -c' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4" && ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid --bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid --mandir=\${prefix}/share/man' checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /opt/local/bin/gmkdir -p checking for gawk... gawk checking whether make sets $(MAKE)... yes checking for gmake... no checking for make... /usr/bin/make checking whether /usr/bin/make sets $(MAKE)... yes checking for gcc... /usr/bin/gcc-4.2 checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether /usr/bin/gcc-4.2 accepts -g... yes checking for /usr/bin/gcc-4.2 option to accept ISO C89... none needed checking for style of include used by /usr/bin/make... GNU checking dependency style of /usr/bin/gcc-4.2... gcc3 checking for function prototypes... yes checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E checking for grep that handles long lines and -e... /usr/bin/grep checking for egrep... /usr/bin/grep -E checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking for string.h... (cached) yes checking how to run the C preprocessor... /usr/bin/gcc-4.2 -E checking for an ANSI C-conforming const... yes checking for inline... inline checking for preprocessor stringizing operator... yes checking for ANSI C header files... (cached) yes checking ctype.h usability... yes checking ctype.h presence... yes checking for ctype.h... yes checking errno.h usability... yes checking errno.h presence... yes checking for errno.h... yes checking fcntl.h usability... yes checking fcntl.h presence... yes checking for fcntl.h... yes checking limits.h usability... yes checking limits.h presence... yes checking for limits.h... yes checking pty.h usability... no checking pty.h presence... no checking for pty.h... no checking malloc.h usability... no checking malloc.h presence... no checking for malloc.h... no checking for memory.h... (cached) yes checking siginfo.h usability... no checking siginfo.h presence... no checking for siginfo.h... no checking for string.h... (cached) yes checking for strings.h... (cached) yes checking stropts.h usability... no checking stropts.h presence... no checking for stropts.h... no checking for sys/types.h... (cached) yes checking sys/wait.h usability... yes checking sys/wait.h presence... yes checking for sys/wait.h... yes checking for unistd.h... (cached) yes checking util.h usability... yes checking util.h presence... yes checking for util.h... yes checking sysexits.h usability... yes checking sysexits.h presence... yes checking for sysexits.h... yes checking for memcpy... yes checking for memmove... yes checking for memset... yes checking for strerror... yes checking for strchr... yes checking for strrchr... yes checking for strstr... yes checking for strtok... yes checking for strrtok... no checking for index... yes checking for rindex... yes checking for unsetenv... yes checking for openpty... yes checking return type of signal handlers... void checking for size_t... yes checking whether to create the local state directory at install time... yes checking whether to install sample .conf files in sysconfdir... yes checking whether subversion... no checking whether mail addresses should be in the rancid+ form... no checking whether admin mail addresses should be in the rancid-admin+ form... rancid-admin- checking for dirname... /usr/bin/dirname checking for a diff(1) that supports -u... diff -U 4 checking for sendmail... /usr/sbin/sendmail checking for gnutar... gnutar checking for automake... ${SHELL} /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4/missing --run automake-1.11 checking for perl5... /opt/local/bin/perl5 checking for expect... /usr/bin/expect checking for ping... /sbin/ping configure: error: can't figure out how to pass count == 1 to /sbin/ping. shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/work/rancid-2.3.4" && ./configure --prefix=/opt/local --localstatedir=/opt/local/var/rancid --bindir=/opt/local/libexec/rancid --sysconfdir=/opt/local/etc/rancid --mandir=\${prefix}/share/man " returned error 1 Error: Target org.macports.configure returned: configure failure: shell command failed (see log for details) DEBUG: Backtrace: configure failure: shell command failed (see log for details) while executing "$procedure $targetname" Warning: the following items did not execute (for rancid): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports.install Log for rancid is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_rancid/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} -- -- Ticket URL: <https://trac.macports.org/ticket/28921#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS