Re: [MacPorts] #21771: libsdl_gfx build failure under xcode 3.2

2 Oct 2009

      #21771: libsdl_gfx  build failure under xcode 3.2
----------------------------------+-----------------------------------------
 Reporter:  chrisg@…              |       Owner:  macports-tickets@…                   
     Type:  defect                |      Status:  new                                  
 Priority:  Normal                |   Milestone:                                       
Component:  ports                 |     Version:  1.8.1                                
 Keywords:  libsdl_gfx xcode 3.2  |        Port:  libsdl_gfx                           
----------------------------------+-----------------------------------------

Comment(by chrisg@…):

 I was unaware of the debug switch to port.  Since I found it I attempted a
 rebuild and the following is the output.

 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl_gfx
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libsdl_gfx
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libsdl_gfx.
 DEBUG: Requested variant i386 is not provided by port libsdl_gfx.
 DEBUG: Requested variant macosx is not provided by port libsdl_gfx.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libiconv 1.13_0 exists in the ports tree
 DEBUG: libiconv 1.13_0  is the latest installed
 DEBUG: libiconv 1.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port libiconv.
 DEBUG: Requested variant i386 is not provided by port libiconv.
 DEBUG: Requested variant macosx is not provided by port libiconv.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gperf 3.0.4_0 exists in the ports tree
 DEBUG: gperf 3.0.4_0  is the latest installed
 DEBUG: gperf 3.0.4_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gperf.
 DEBUG: Requested variant i386 is not provided by port gperf.
 DEBUG: Requested variant macosx is not provided by port gperf.
 DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0
 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: libtool 2.2.6a_0 exists in the ports tree
 DEBUG: libtool 2.2.6a_0  is the latest installed
 DEBUG: libtool 2.2.6a_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port libtool.
 DEBUG: Requested variant i386 is not provided by port libtool.
 DEBUG: Requested variant macosx is not provided by port libtool.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: automake 1.11_0 exists in the ports tree
 DEBUG: automake 1.11_0  is the latest installed
 DEBUG: automake 1.11_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port automake.
 DEBUG: Requested variant i386 is not provided by port automake.
 DEBUG: Requested variant macosx is not provided by port automake.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: autoconf 2.64_2 exists in the ports tree
 DEBUG: autoconf 2.64_2  is the latest installed
 DEBUG: autoconf 2.64_2  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port autoconf.
 DEBUG: Requested variant i386 is not provided by port autoconf.
 DEBUG: Requested variant macosx is not provided by port autoconf.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5 5.8.9_0 exists in the ports tree
 DEBUG: perl5 5.8.9_0  is the latest installed
 DEBUG: perl5 5.8.9_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.
 DEBUG: Requested variant i386 is not provided by port perl5.
 DEBUG: Requested variant macosx is not provided by port perl5.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: perl5.8 5.8.9_3 exists in the ports tree
 DEBUG: perl5.8 5.8.9_3  is the latest installed
 DEBUG: perl5.8 5.8.9_3  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port perl5.8.
 DEBUG: Requested variant i386 is not provided by port perl5.8.
 DEBUG: Requested variant macosx is not provided by port perl5.8.
 DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3
 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: m4 1.4.13_0 exists in the ports tree
 DEBUG: m4 1.4.13_0  is the latest installed
 DEBUG: m4 1.4.13_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port m4.
 DEBUG: Requested variant i386 is not provided by port m4.
 DEBUG: Requested variant macosx is not provided by port m4.
 DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: help2man 1.36.4_1 exists in the ports tree
 DEBUG: help2man 1.36.4_1  is the latest installed
 DEBUG: help2man 1.36.4_1  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port help2man.
 DEBUG: Requested variant i386 is not provided by port help2man.
 DEBUG: Requested variant macosx is not provided by port help2man.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree
 DEBUG: p5-locale-gettext 1.05_0  is the latest installed
 DEBUG: p5-locale-gettext 1.05_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5
 -locale-gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl
 DEBUG: 'universal_variant no' specified, so not adding the default
 universal variant
 DEBUG: Requested variant darwin is not provided by port p5-locale-gettext.
 DEBUG: Requested variant i386 is not provided by port p5-locale-gettext.
 DEBUG: Requested variant macosx is not provided by port p5-locale-gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: gettext 0.17_4 exists in the ports tree
 DEBUG: gettext 0.17_4  is the latest installed
 DEBUG: gettext 0.17_4  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port gettext.
 DEBUG: Requested variant i386 is not provided by port gettext.
 DEBUG: Requested variant macosx is not provided by port gettext.
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncurses 5.7_0 exists in the ports tree
 DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncurses 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncurses.
 DEBUG: Requested variant i386 is not provided by port ncurses.
 DEBUG: Requested variant macosx is not provided by port ncurses.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: ncursesw 5.7_0 exists in the ports tree
 DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed
 DEBUG: ncursesw 5.7_0 +darwin_10 is active
 DEBUG: Merging existing variants darwin_10 into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: universal variant already exists, so not adding the default one
 DEBUG: Requested variant darwin is not provided by port ncursesw.
 DEBUG: Requested variant i386 is not provided by port ncursesw.
 DEBUG: Requested variant macosx is not provided by port ncursesw.
 DEBUG: Executing variant darwin_10 provides darwin_10
 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0
 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0
 DEBUG: Found port in
 file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: epoch: in tree: 0 installed: 0
 DEBUG: expat 2.0.1_0 exists in the ports tree
 DEBUG: expat 2.0.1_0  is the latest installed
 DEBUG: expat 2.0.1_0  is active
 DEBUG: Merging existing variants  into variants
 DEBUG: new fully merged portvariants:
 DEBUG: Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 DEBUG: OS Platform: darwin
 DEBUG: OS Version: 10.0.0
 DEBUG: Mac OS X Version: 10.6
 DEBUG: System Arch: i386
 DEBUG: setting option os.universal_supported to yes
 DEBUG: org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.unload registered provides 'unload', a pre-existing
 procedure. Target override will not be provided
 DEBUG: org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 DEBUG: adding the default universal variant
 DEBUG: Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 DEBUG: Requested variant darwin is not provided by port expat.
 DEBUG: Requested variant i386 is not provided by port expat.
 DEBUG: Requested variant macosx is not provided by port expat.
 DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4
 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext
 1.05_0
 DEBUG: No need to upgrade! help2man 1.36.4_1 >= help2man 1.36.4_1
 DEBUG: No need to upgrade! autoconf 2.64_2 >= autoconf 2.64_2
 DEBUG: No need to upgrade! automake 1.11_0 >= automake 1.11_0
 DEBUG: No need to upgrade! libtool 2.2.6a_0 >= libtool 2.2.6a_0
 --->  Computing dependencies for libsdl_gfx
 DEBUG: Searching for dependency: libsdl
 DEBUG: Didn't find receipt, going to depspec regex for: libsdl
 DEBUG: Found Dependency: path: /opt/local/lib/pkgconfig filename: sdl.pc
 regex: ^sdl.pc$
 DEBUG: Searching for dependency: libiconv
 DEBUG: Found Dependency: receipt exists for libiconv
 DEBUG: Searching for dependency: libtool
 DEBUG: Found Dependency: receipt exists for libtool
 DEBUG: Executing org.macports.main (libsdl_gfx)
 DEBUG: Skipping completed org.macports.fetch (libsdl_gfx)
 DEBUG: Skipping completed org.macports.checksum (libsdl_gfx)
 DEBUG: Skipping completed org.macports.extract (libsdl_gfx)
 DEBUG: Skipping completed org.macports.patch (libsdl_gfx)
 DEBUG: Skipping completed org.macports.configure (libsdl_gfx)
 --->  Building libsdl_gfx
 DEBUG: Executing org.macports.build (libsdl_gfx)
 DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6'
 DEBUG: Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl_gfx/work/SDL_gfx-2.0.20"
 && /usr/bin/make -j2 all LIBTOOL=glibtool'
 glibtool --tag=CC   --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I.   -I/opt/local/include  -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c -o SDL_rotozoom.lo
 SDL_rotozoom.c
 glibtool --tag=CC   --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I.   -I/opt/local/include  -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c -o
 SDL_imageFilter.lo SDL_imageFilter.c
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c SDL_rotozoom.c
 -fno-common -DPIC -o .libs/SDL_rotozoom.o
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c
 SDL_imageFilter.c  -fno-common -DPIC -o .libs/SDL_imageFilter.o
 SDL_rotozoom.c: In function 'transformSurfaceY':
 SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'rotozoomSurfaceXY':
 SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'zoomSurface':
 SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'shrinkSurface':
 SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 make: *** [SDL_rotozoom.lo] Error 1
 make: *** Waiting for unfinished jobs....
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c
 SDL_imageFilter.c -o SDL_imageFilter.o >/dev/null 2>&1
 mv -f .deps/SDL_imageFilter.Tpo .deps/SDL_imageFilter.Plo
 Error: Target org.macports.build returned: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl_gfx/work/SDL_gfx-2.0.20"
 && /usr/bin/make -j2 all LIBTOOL=glibtool " returned error 2
 Command output: glibtool --tag=CC   --mode=compile /usr/bin/gcc-4.2
 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\"
 -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\"
 -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1
 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1
 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I.   -I/opt/local/include  -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c -o SDL_rotozoom.lo
 SDL_rotozoom.c
 glibtool --tag=CC   --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I.   -I/opt/local/include  -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c -o
 SDL_imageFilter.lo SDL_imageFilter.c
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c SDL_rotozoom.c
 -fno-common -DPIC -o .libs/SDL_rotozoom.o
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c
 SDL_imageFilter.c  -fno-common -DPIC -o .libs/SDL_imageFilter.o
 SDL_rotozoom.c: In function 'transformSurfaceY':
 SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'rotozoomSurfaceXY':
 SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'zoomSurface':
 SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'shrinkSurface':
 SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 make: *** [SDL_rotozoom.lo] Error 1
 make: *** Waiting for unfinished jobs....
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c
 SDL_imageFilter.c -o SDL_imageFilter.o >/dev/null 2>&1
 mv -f .deps/SDL_imageFilter.Tpo .deps/SDL_imageFilter.Plo

 DEBUG: Backtrace: shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_devel_libsdl_gfx/work/SDL_gfx-2.0.20"
 && /usr/bin/make -j2 all LIBTOOL=glibtool " returned error 2
 Command output: glibtool --tag=CC   --mode=compile /usr/bin/gcc-4.2
 -DPACKAGE_NAME=\"\" -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\"
 -DPACKAGE_STRING=\"\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\"
 -DVERSION=\"2.0.20\" -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1
 -DHAVE_SYS_STAT_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1
 -DHAVE_STRINGS_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1
 -DHAVE_DLFCN_H=1 -DBUILD_DLL -I.   -I/opt/local/include  -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c -o SDL_rotozoom.lo
 SDL_rotozoom.c
 glibtool --tag=CC   --mode=compile /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I.   -I/opt/local/include  -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c -o
 SDL_imageFilter.lo SDL_imageFilter.c
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_rotozoom.lo -MD -MP -MF .deps/SDL_rotozoom.Tpo -c SDL_rotozoom.c
 -fno-common -DPIC -o .libs/SDL_rotozoom.o
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c
 SDL_imageFilter.c  -fno-common -DPIC -o .libs/SDL_imageFilter.o
 SDL_rotozoom.c: In function 'transformSurfaceY':
 SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:628: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'rotozoomSurfaceXY':
 SDL_rotozoom.c:856: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:989: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c:1063: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'zoomSurface':
 SDL_rotozoom.c:1219: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 SDL_rotozoom.c: In function 'shrinkSurface':
 SDL_rotozoom.c:1333: error: 'SDL_PixelFormat' has no member named
 'colorkey'
 make: *** [SDL_rotozoom.lo] Error 1
 make: *** Waiting for unfinished jobs....
 glibtool: compile:  /usr/bin/gcc-4.2 -DPACKAGE_NAME=\"\"
 -DPACKAGE_TARNAME=\"\" -DPACKAGE_VERSION=\"\" -DPACKAGE_STRING=\"\"
 -DPACKAGE_BUGREPORT=\"\" -DPACKAGE=\"SDL_gfx\" -DVERSION=\"2.0.20\"
 -DSTDC_HEADERS=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_SYS_STAT_H=1
 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_MEMORY_H=1 -DHAVE_STRINGS_H=1
 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_UNISTD_H=1 -DHAVE_DLFCN_H=1
 -DBUILD_DLL -I. -I/opt/local/include -O2 -arch x86_64
 -I/opt/local/include/SDL -D_GNU_SOURCE=1 -D_THREAD_SAFE -MT
 SDL_imageFilter.lo -MD -MP -MF .deps/SDL_imageFilter.Tpo -c
 SDL_imageFilter.c -o SDL_imageFilter.o >/dev/null 2>&1
 mv -f .deps/SDL_imageFilter.Tpo .deps/SDL_imageFilter.Plo

     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 9)
     invoked from within
 "$procedure $targetname"
 Warning: the following items did not execute (for libsdl_gfx):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 Error: Status 1 encountered during processing.

-- 
Ticket URL: <http://trac.macports.org/ticket/21771#comment:1>
MacPorts <http://www.macports.org/>
Ports system for Mac OS