[MacPorts] #29804: py27-numpy: non-matching file appears to be HTML

13 Jun 2011

      #29804: py27-numpy: non-matching file appears to be HTML
------------------------------------+---------------------------------------
 Reporter:  tun.buynsell@…          |       Owner:  macports-tickets@…                   
     Type:  defect                  |      Status:  new                                  
 Priority:  Normal                  |   Milestone:                                       
Component:  ports                   |     Version:  1.9.2                                
 Keywords:                          |        Port:  py27-numpy                           
------------------------------------+---------------------------------------
 I am trying to install py-27 numpy on my macbook pro running 10.6.7 (Snow
 Leopard Mac OS) by using:

 {{{
 sudo port install py27-numpy
 }}}

 It says that:
 The non-matching file appears to be HTML. See this page for possible
 reasons

 Here's the whole main.log for your enjoyment:

 {{{
 version:1
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main python27 2.7.1_3 exists in the ports tree
 :debug:main python27 2.7.1_3 +universal is the latest installed
 :debug:main python27 2.7.1_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/python27
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! python27 2.7.1_3 >= python27 2.7.1_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_2 exists in the ports tree
 :debug:main gettext 0.18.1.1_2 +universal is the latest installed
 :debug:main gettext 0.18.1.1_2 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.13.1_0 exists in the ports tree
 :debug:main libiconv 1.13.1_0 +universal is the latest installed
 :debug:main libiconv 1.13.1_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_0 exists in the ports tree
 :debug:main ncurses 5.9_0 +universal is the latest installed
 :debug:main ncurses 5.9_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! ncurses 5.9_0 >= ncurses 5.9_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_1 exists in the ports tree
 :debug:main expat 2.0.1_1 +universal is the latest installed
 :debug:main expat 2.0.1_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.5_0 exists in the ports tree
 :debug:main zlib 1.2.5_0 +universal is the latest installed
 :debug:main zlib 1.2.5_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.0d_0 exists in the ports tree
 :debug:main openssl 1.0.0d_0 +universal is the latest installed
 :debug:main openssl 1.0.0d_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main sqlite3 3.7.6_0 exists in the ports tree
 :debug:main sqlite3 3.7.6_0 +universal is the latest installed
 :debug:main sqlite3 3.7.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/sqlite3
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! sqlite3 3.7.6_0 >= sqlite3 3.7.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main readline 6.2.000_0 exists in the ports tree
 :debug:main readline 6.2.000_0 +universal is the latest installed
 :debug:main readline 6.2.000_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main db46 4.6.21_6 exists in the ports tree
 :debug:main db46 4.6.21_6 +universal is the latest installed
 :debug:main db46 4.6.21_6 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/db46
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gdbm 1.8.3_3 exists in the ports tree
 :debug:main gdbm 1.8.3_3 +universal is the latest installed
 :debug:main gdbm 1.8.3_3 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0 +universal is the latest installed
 :debug:main bzip2 1.0.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main python_select 0.3_1 exists in the ports tree
 :debug:main python_select 0.3_1  is the latest installed
 :debug:main python_select 0.3_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/python_select
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Requested variant universal is not provided by port
 python_select.
 :debug:main No need to upgrade! python_select 0.3_1 >= python_select 0.3_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main fftw-3 3.2.2_0 exists in the ports tree
 :debug:main fftw-3 3.2.2_0 +universal is the latest installed
 :debug:main fftw-3 3.2.2_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/fftw-3
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! fftw-3 3.2.2_0 >= fftw-3 3.2.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main py27-nose 1.0.0_0 exists in the ports tree
 :debug:main py27-nose 1.0.0_0  is the latest installed
 :debug:main py27-nose 1.0.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-nose
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl
 :debug:main only one arch supported, so not adding the default universal
 variant
 :debug:main Requested variant universal is not provided by port py27-nose.
 :debug:main No need to upgrade! py27-nose 1.0.0_0 >= py27-nose 1.0.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main py27-distribute 0.6.19_0 exists in the ports tree
 :debug:main py27-distribute 0.6.19_0 +universal is the latest installed
 :debug:main py27-distribute 0.6.19_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/python/py27-distribute
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/python27-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! py27-distribute 0.6.19_0 >=
 py27-distribute 0.6.19_0
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main gcc44 4.4.6_0 exists in the ports tree
 :debug:main gcc44 4.4.6_0 +universal is the latest installed
 :debug:main gcc44 4.4.6_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/gcc44
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gcc44 4.4.6_0 >= gcc44 4.4.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gmp 5.0.1_1 exists in the ports tree
 :debug:main gmp 5.0.1_1 +universal is the latest installed
 :debug:main gmp 5.0.1_1 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gmp
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gmp 5.0.1_1 >= gmp 5.0.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main mpfr 3.0.1-p3_0 exists in the ports tree
 :debug:main mpfr 3.0.1-p3_0 +universal is the latest installed
 :debug:main mpfr 3.0.1-p3_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/mpfr
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! mpfr 3.0.1-p3_0 >= mpfr 3.0.1-p3_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gcc_select 0.1_5 exists in the ports tree
 :debug:main gcc_select 0.1_5  is the latest installed
 :debug:main gcc_select 0.1_5  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/sysutils/gcc_select
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/select-1.0.tcl
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Requested variant universal is not provided by port
 gcc_select.
 :debug:main No need to upgrade! gcc_select 0.1_5 >= gcc_select 0.1_5
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main atlas 3.9.37_0 exists in the ports tree
 :debug:main atlas 3.9.37_0 +gcc44+universal is the latest installed
 :debug:main atlas 3.9.37_0 +gcc44+universal is active
 :debug:main Merging existing variants '+gcc44+universal' into variants
 :debug:main new fully merged portvariants: universal + gcc44 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/math/atlas
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant universal provides universal
 :debug:main Executing variant gcc44 provides gcc44
 :debug:main No need to upgrade! atlas 3.9.37_0 >= atlas 3.9.37_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gzip 1.4_0 exists in the ports tree
 :debug:main gzip 1.4_0 +universal is the latest installed
 :debug:main gzip 1.4_0 +universal is active
 :debug:main Merging existing variants '+universal' into variants
 :debug:main new fully merged portvariants: universal +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/gzip
 :debug:main OS darwin/10.7.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Executing variant universal provides universal
 :debug:main No need to upgrade! gzip 1.4_0 >= gzip 1.4_0
 :msg:main --->  Computing dependencies for py27-numpy:info:main
 .:debug:main Searching for dependency: python27
 :debug:main Found Dependency: receipt exists for python27
 :debug:main Searching for dependency: fftw-3
 :debug:main Found Dependency: receipt exists for fftw-3
 :debug:main Searching for dependency: py27-nose
 :debug:main Found Dependency: receipt exists for py27-nose
 :debug:main Searching for dependency: gcc44
 :debug:main Found Dependency: receipt exists for gcc44
 :debug:main Searching for dependency: atlas
 :debug:main Found Dependency: receipt exists for atlas
 :msg:main
 :debug:main Executing org.macports.main (py27-numpy)
 :debug:main Skipping completed org.macports.fetch (py27-numpy)
 :msg:main --->  Verifying checksum(s) for py27-numpy
 :debug:checksum checksum phase started at Sun Jun 12 21:39:08 EDT 2011
 :debug:checksum Executing org.macports.checksum (py27-numpy)
 :info:checksum --->  Checksumming numpy-1.6.0.tar.gz
 :error:checksum Checksum (md5) mismatch for numpy-1.6.0.tar.gz
 :info:checksum Portfile checksum: numpy-1.6.0.tar.gz md5
 e0993c74cb8e83292e560eac1a9be8e9
 :info:checksum Distfile checksum: numpy-1.6.0.tar.gz md5
 ebf87808253b9892ef15bdfdbd1b7203
 :error:checksum Checksum (sha1) mismatch for numpy-1.6.0.tar.gz
 :info:checksum Portfile checksum: numpy-1.6.0.tar.gz sha1
 0692acfb5cdc55ca251aa2b950e321a662810c36
 :info:checksum Distfile checksum: numpy-1.6.0.tar.gz sha1
 50e024777cb712ea0aa45aa7dac2e310d9e539b6
 :error:checksum Checksum (rmd160) mismatch for numpy-1.6.0.tar.gz
 :info:checksum Portfile checksum: numpy-1.6.0.tar.gz rmd160
 29bee854e1436e0baad46150606d7a0d2d80ac61
 :info:checksum Distfile checksum: numpy-1.6.0.tar.gz rmd160
 dfd0eef6234b07338388bb47f43fbf90d259ab48
 :info:checksum The correct checksum line may be:
 :info:checksum checksums           md5
 ebf87808253b9892ef15bdfdbd1b7203 \
                     sha1    50e024777cb712ea0aa45aa7dac2e310d9e539b6 \
                     rmd160  dfd0eef6234b07338388bb47f43fbf90d259ab48
 :msg:checksum ***
 :msg:checksum The non-matching file appears to be HTML. See this page for
 possible reasons
 :msg:checksum for the checksum mismatch:
 :msg:checksum <http://trac.macports.org/wiki/MisbehavingServers>
 :msg:checksum ***
 :error:checksum Target org.macports.checksum returned: Unable to verify
 file checksums
 :debug:checksum Backtrace: Unable to verify file checksums
     while executing
 "$procedure $targetname"
 :info:checksum Warning: the following items did not execute (for
 py27-numpy): org.macports.activate org.macports.checksum
 org.macports.extract org.macports.patch org.macports.configure
 org.macports.build org.macports.destroot org.macports.install
 :notice:checksum Log for py27-numpy is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py27-numpy/main.log
 }}}

 What should I do next?

-- 
Ticket URL: <https://trac.macports.org/ticket/29804>
MacPorts <http://www.macports.org/>
Ports system for Mac OS