Re: [MacPorts] #25808: dynamips does not build

25 Jul 2010

      #25808: dynamips does not build
------------------------------------+---------------------------------------
 Reporter:  michaelm@…              |       Owner:  jstrine@…         
     Type:  defect                  |      Status:  new               
 Priority:  Normal                  |   Milestone:                    
Component:  ports                   |     Version:  1.9.1             
 Keywords:                          |        Port:  dynamips          
------------------------------------+---------------------------------------

Comment(by michaelm@…):

 Here is the full log.

 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libelf 0.8.10_1 exists in the ports tree
 :debug:main libelf 0.8.10_1  is the latest installed
 :debug:main libelf 0.8.10_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libelf
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libelf 0.8.10_1 >= libelf 0.8.10_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main gettext 0.18.1.1_1 exists in the ports tree
 :debug:main gettext 0.18.1.1_1  is the latest installed
 :debug:main gettext 0.18.1.1_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! gettext 0.18.1.1_1 >= gettext 0.18.1.1_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.13.1_0 exists in the ports tree
 :debug:main libiconv 1.13.1_0  is the latest installed
 :debug:main libiconv 1.13.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.7_0 exists in the ports tree
 :debug:main ncurses 5.7_0 +darwin_10 is the latest installed
 :debug:main ncurses 5.7_0 +darwin_10 is active
 :debug:main Merging existing variants '+darwin_10' into variants
 :debug:main new fully merged portvariants: darwin_10 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Requested variant darwin_10 is not provided by port ncurses.
 :debug:main Skipping upgrade since ncurses 5.7_0 >= ncurses 5.7_0, even
 though installed variants "+darwin_10" do not match "".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncursesw 5.7_0 exists in the ports tree
 :debug:main ncursesw 5.7_0 +darwin_10 is the latest installed
 :debug:main ncursesw 5.7_0 +darwin_10 is active
 :debug:main Merging existing variants '+darwin_10' into variants
 :debug:main new fully merged portvariants: darwin_10 +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main Using group file
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Requested variant darwin_10 is not provided by port ncursesw.
 :debug:main Skipping upgrade since ncursesw 5.7_0 >= ncursesw 5.7_0, even
 though installed variants "+darwin_10" do not match "".
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.0.1_0 exists in the ports tree
 :debug:main expat 2.0.1_0  is the latest installed
 :debug:main expat 2.0.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libpcap 1.1.1_0 exists in the ports tree
 :debug:main libpcap 1.1.1_0  is the latest installed
 :debug:main libpcap 1.1.1_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/libpcap
 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386
 :debug:main org.macports.load registered provides 'load', a pre-existing
 procedure. Target override will not be provided
 :debug:main org.macports.unload registered provides 'unload', a pre-
 existing procedure. Target override will not be provided
 :debug:main org.macports.distfiles registered provides 'distfiles', a pre-
 existing procedure. Target override will not be provided
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main No need to upgrade! libpcap 1.1.1_0 >= libpcap 1.1.1_0
 :msg:main --->  Computing dependencies for dynamips:info:main .:debug:main
 Searching for dependency: libelf
 :debug:main Found Dependency: receipt exists for libelf
 :debug:main Searching for dependency: libpcap
 :debug:main Found Dependency: receipt exists for libpcap
 :msg:main
 :debug:main Executing org.macports.main (dynamips)
 :debug:main Skipping completed org.macports.fetch (dynamips)
 :debug:main Skipping completed org.macports.checksum (dynamips)
 :debug:main Skipping completed org.macports.extract (dynamips)
 :debug:main Skipping completed org.macports.patch (dynamips)
 :debug:main Skipping completed org.macports.configure (dynamips)
 :msg:main --->  Building dynamips
 :debug:build build phase started at Sat Jul 24 22:12:03 HST 2010
 :debug:build Executing org.macports.build (dynamips)
 :debug:build Environment: CPATH='/opt/local/include'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/work/.CC_PRINT_OPTIONS'
 LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:build Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/work/dynamips-0.2.7"
 && /usr/bin/make -j4 all PREFIX=/opt/local'
 :info:build Extracting ROM from ELF file 'mips64_microcode'...
 :info:build Extracting ROM from ELF file 'ppc32_microcode'...
 :info:build Compiling mips64_jit.c
 :info:build Compiling ppc32_jit.c
 :info:build Compiling ppc32_exec.c
 :info:build Compiling ppc32_mem.c
 :info:build ppc32_exec.c: In function 'ppc32_exec_run_cpu':
 :info:build ppc32_exec.c:200: warning: comparison between pointer and
 integer
 :info:build mips64_jit.c:258: warning: 'insn_jump_find' defined but not
 used
 :info:build ppc32_jit.c:246: warning: 'ppc32_jit_show_hreg_status' defined
 but not used
 :info:build ppc32_jit.c:458: warning: 'ppc32_jit_tcb_add_end' defined but
 not used
 :info:build ppc32_jit.c:750: warning: 'ppc32_op_dump' defined but not used
 :info:build ppc32_jit.c:838: warning: 'ppc32_check_reg_map' defined but
 not used
 :info:build ppc32_exec.c: In function 'ppc32_exec_MFDCR':
 :info:build ppc32_exec.c:3608: warning: unused variable 'rt'
 :info:build ppc32_exec.c: In function 'ppc32_exec_MTDCR':
 :info:build ppc32_exec.c:3615: warning: unused variable 'rt'
 :info:build ppc32_exec.c: At top level:
 :info:build ppc32_exec.c:3330: warning: 'ppc32_exec_SUBFCO' defined but
 not used
 :info:build ppc32_exec.c:3348: warning: 'ppc32_exec_SUBFCO_dot' defined
 but not used
 :info:build /var/tmp//cc6ZEI75.s:1323:suffix or operands invalid for `mov'
 :info:build make: *** [mips64_jit.o] Error 1
 :info:build make: *** Waiting for unfinished jobs....
 :info:build /var/tmp//cc13lYFJ.s:4890:suffix or operands invalid for `mov'
 :info:build make: *** [ppc32_jit.o] Error 1
 :info:build shell command " cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/work/dynamips-0.2.7"
 && /usr/bin/make -j4 all PREFIX=/opt/local " returned error 2
 :error:build Target org.macports.build returned: shell command failed
 :debug:build Backtrace: shell command failed
     while executing
 "command_exec build"
     (procedure "portbuild::build_main" line 8)
     invoked from within
 "$procedure $targetname"
 :info:build Warning: the following items did not execute (for dynamips):
 org.macports.activate org.macports.build org.macports.destroot
 org.macports.install
 :notice:build Log for dynamips is at:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_dynamips/main.log
 }}}

-- 
Ticket URL: <http://trac.macports.org/ticket/25808#comment:2>
MacPorts <http://www.macports.org/>
Ports system for Mac OS