[MacPorts] #46796: airspy configuration failed

8 Feb 2015

      #46796: airspy configuration failed
--------------------------+--------------------------------
 Reporter:  jbwmyoung@…   |      Owner:  macports-tickets@…
     Type:  defect        |     Status:  new
 Priority:  Normal        |  Milestone:
Component:  ports         |    Version:  2.3.3
 Keywords:  Config error  |       Port:  airspy
--------------------------+--------------------------------
 I have been trying to install gqrx via MacPorts, but I ran into an error
 when it came to the airspy dependency. It appears there is something wrong
 with the configuration.

 This is the output I get

 {{{
 Error: org.macports.configure for port airspy returned: configure failure:
 command execution failed
 Error: Failed to install airspy
 }}}

 It then directs me to a log file and requests that I open a ticket. The
 log file is at the end of this post. I tried looking at it, but I can't
 make any sense of where the error is.

 I have tried to clean airspy and install it again, but I get the same
 error.

 Additional information:
 I am running OSX 10.6.8 and my Xcode is 3.2.6.

 ----

 {{{
 version:1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main cmake 3.0.2_1 exists in the ports tree
 :debug:main cmake 3.0.2_1  is the latest installed
 :debug:main cmake 3.0.2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/cmake
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! cmake 3.0.2_1 >= cmake 3.0.2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libidn 1.29_0 exists in the ports tree
 :debug:main libidn 1.29_0  is the latest installed
 :debug:main libidn 1.29_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/libidn
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Sourcing PortGroup conflicts_build 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/conflicts_build-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libidn 1.29_0 >= libidn 1.29_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libiconv 1.14_0 exists in the ports tree
 :debug:main libiconv 1.14_0  is the latest installed
 :debug:main libiconv 1.14_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0
 :debug:main epoch: in tree: 2 installed: 2
 :debug:main gettext 0.19.4_0 exists in the ports tree
 :debug:main gettext 0.19.4_0  is the latest installed
 :debug:main gettext 0.19.4_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Sourcing PortGroup compiler_blacklist_versions 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/compiler_blacklist_versions-1.0.tcl
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main compiler clang 77 blacklisted because it matches {clang <
 211.10.1}
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! gettext 0.19.4_0 >= gettext 0.19.4_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main expat 2.1.0_0 exists in the ports tree
 :debug:main expat 2.1.0_0  is the latest installed
 :debug:main expat 2.1.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main ncurses 5.9_2 exists in the ports tree
 :debug:main ncurses 5.9_2  is the latest installed
 :debug:main ncurses 5.9_2  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! ncurses 5.9_2 >= ncurses 5.9_2
 :debug:main epoch: in tree: 1 installed: 1
 :debug:main openssl 1.0.2_0 exists in the ports tree
 :debug:main openssl 1.0.2_0  is the latest installed
 :debug:main openssl 1.0.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! openssl 1.0.2_0 >= openssl 1.0.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main zlib 1.2.8_0 exists in the ports tree
 :debug:main zlib 1.2.8_0  is the latest installed
 :debug:main zlib 1.2.8_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Sourcing PortGroup xcodeversion 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! zlib 1.2.8_0 >= zlib 1.2.8_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main curl 7.40.0_0 exists in the ports tree
 :debug:main curl 7.40.0_0 +ssl is the latest installed
 :debug:main curl 7.40.0_0 +ssl is active
 :debug:main Merging existing variants '+ssl' into variants
 :debug:main new fully merged portvariants: ssl +
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Executing variant ssl provides ssl
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! curl 7.40.0_0 >= curl 7.40.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main curl-ca-bundle 7.40.0_0 exists in the ports tree
 :debug:main curl-ca-bundle 7.40.0_0  is the latest installed
 :debug:main curl-ca-bundle 7.40.0_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main universal_variant is false, so not adding the default
 universal variant
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! curl-ca-bundle 7.40.0_0 >= curl-ca-bundle
 7.40.0_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main bzip2 1.0.6_0 exists in the ports tree
 :debug:main bzip2 1.0.6_0  is the latest installed
 :debug:main bzip2 1.0.6_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libarchive 3.1.2_0 exists in the ports tree
 :debug:main libarchive 3.1.2_0  is the latest installed
 :debug:main libarchive 3.1.2_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/libarchive
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libarchive 3.1.2_0 >= libarchive 3.1.2_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libxml2 2.9.2_1 exists in the ports tree
 :debug:main libxml2 2.9.2_1  is the latest installed
 :debug:main libxml2 2.9.2_1  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libxml2 2.9.2_1 >= libxml2 2.9.2_1
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main xz 5.0.7_0 exists in the ports tree
 :debug:main xz 5.0.7_0  is the latest installed
 :debug:main xz 5.0.7_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/xz
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! xz 5.0.7_0 >= xz 5.0.7_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main lzo2 2.08_0 exists in the ports tree
 :debug:main lzo2 2.08_0  is the latest installed
 :debug:main lzo2 2.08_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/lzo2
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Sourcing PortGroup muniversal 1.0 from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl
 :debug:main universal variant already exists, so not adding the default
 one
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! lzo2 2.08_0 >= lzo2 2.08_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main pkgconfig 0.28_0 exists in the ports tree
 :debug:main pkgconfig 0.28_0  is the latest installed
 :debug:main pkgconfig 0.28_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pkgconfig
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! pkgconfig 0.28_0 >= pkgconfig 0.28_0
 :debug:main epoch: in tree: 0 installed: 0
 :debug:main libusb 1.0.18_0 exists in the ports tree
 :debug:main libusb 1.0.18_0  is the latest installed
 :debug:main libusb 1.0.18_0  is active
 :debug:main Merging existing variants '' into variants
 :debug:main new fully merged portvariants:
 :debug:main Changing to port directory:
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb
 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386
 :debug:main adding the default universal variant
 :debug:main Reading variant descriptions from
 /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf
 :debug:main Running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Finished running callback
 portconfigure::add_automatic_compiler_dependencies
 :debug:main Running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main Finished running callback
 portbuild::add_automatic_buildsystem_dependencies
 :debug:main No need to upgrade! libusb 1.0.18_0 >= libusb 1.0.18_0
 :msg:main --->  Computing dependencies for airspy:info:main .:debug:main
 airspy has no conflicts
 :debug:main Searching for dependency: cmake
 :debug:main Found Dependency: receipt exists for cmake
 :debug:main Searching for dependency: pkgconfig
 :debug:main Found Dependency: receipt exists for pkgconfig
 :debug:main Searching for dependency: libusb
 :debug:main Found Dependency: receipt exists for libusb
 :msg:main
 :debug:main Executing org.macports.main (airspy)
 :debug:archivefetch archivefetch phase started at Sat Feb  7 20:26:46 HST
 2015
 :msg:archivefetch --->  Fetching archive for airspy
 :debug:archivefetch Executing org.macports.archivefetch (airspy)
 :info:archivefetch --->  airspy-20150106_0.darwin_10.x86_64.tbz2 doesn't
 seem to exist in /opt/local/var/macports/incoming/verified
 :msg:archivefetch --->  Attempting to fetch airspy-
 20150106_0.darwin_10.x86_64.tbz2 from http://packages.macports.org/airspy
 :debug:archivefetch Fetching archive failed:: The requested URL returned
 error: 404
 :msg:archivefetch --->  Attempting to fetch airspy-
 20150106_0.darwin_10.x86_64.tbz2 from
 http://mse.uk.packages.macports.org/sites/packages.macports.org/airspy
 :debug:archivefetch Fetching archive failed:: The requested URL returned
 error: 404
 :msg:archivefetch --->  Attempting to fetch airspy-
 20150106_0.darwin_10.x86_64.tbz2 from
 http://nue.de.packages.macports.org/macports/packages/airspy
 :debug:archivefetch Fetching archive failed:: The requested URL returned
 error: 404
 :debug:fetch fetch phase started at Sat Feb  7 20:26:50 HST 2015
 :notice:fetch --->  Fetching distfiles for airspy
 :debug:fetch Executing org.macports.fetch (airspy)
 :debug:checksum checksum phase started at Sat Feb  7 20:26:50 HST 2015
 :notice:checksum --->  Verifying checksums for airspy
 :debug:checksum Executing org.macports.checksum (airspy)
 :info:checksum --->  Checksumming host-
 198b1e59c01f556a0d68fa2907c63482faf6c543.tar.gz
 :debug:checksum Calculated (rmd160) is
 c09fa814742bc38544e7955d5cce942d78074459
 :debug:checksum Correct (rmd160) checksum for host-
 198b1e59c01f556a0d68fa2907c63482faf6c543.tar.gz
 :debug:checksum Calculated (sha256) is
 59793cc183d7ce0cbb26b2e459a4c56194c1711c66752759ca5803df08fa1d12
 :debug:checksum Correct (sha256) checksum for host-
 198b1e59c01f556a0d68fa2907c63482faf6c543.tar.gz
 :debug:extract extract phase started at Sat Feb  7 20:26:50 HST 2015
 :notice:extract --->  Extracting airspy
 :debug:extract Executing org.macports.extract (airspy)
 :info:extract --->  Extracting host-
 198b1e59c01f556a0d68fa2907c63482faf6c543.tar.gz
 :debug:extract setting option extract.args to
 '/opt/local/var/macports/distfiles/airspy/host-
 198b1e59c01f556a0d68fa2907c63482faf6c543.tar.gz'
 :debug:extract Environment:
 CC_PRINT_OPTIONS='YES'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work/.CC_PRINT_OPTIONS'
 CPATH='/opt/local/include'
 LIBRARY_PATH='/opt/local/lib'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 :debug:extract Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work"
 && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/airspy/host-
 198b1e59c01f556a0d68fa2907c63482faf6c543.tar.gz' | /usr/bin/gnutar --no-
 same-owner -xf -'
 :debug:extract Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work"
 && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/airspy/host-
 198b1e59c01f556a0d68fa2907c63482faf6c543.tar.gz' | /usr/bin/gnutar --no-
 same-owner -xf -
 :debug:extract Executing proc-post-org.macports.extract-extract-0
 :debug:extract Executing proc-post-org.macports.extract-extract-1
 :debug:patch patch phase started at Sat Feb  7 20:26:50 HST 2015
 :debug:patch Executing org.macports.patch (airspy)
 :debug:patch Executing proc-post-org.macports.patch-patch-0
 :info:patch --->  Patching airspy_lib_version.c: s@%d.%d.%d@%d.%d.%d
 MacPorts 198b1e59(20150106)@
 :debug:patch Executing reinplace: /usr/bin/sed {s@%d.%d.%d@%d.%d.%d
 MacPorts 198b1e59(20150106)@} <
 /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work
 /host-198b1e59c01f556a0d68fa2907c63482faf6c543/airspy-
 tools/src/airspy_lib_version.c >@ file10 2>@stderr
 :debug:configure configure phase started at Sat Feb  7 20:26:50 HST 2015
 :notice:configure --->  Configuring airspy
 :debug:configure Using compiler 'Xcode GCC 4.2'
 :debug:configure Executing proc-pre-org.macports.configure-configure-0
 :debug:configure Executing org.macports.configure (airspy)
 :debug:configure Environment:
 CC='/usr/bin/gcc-4.2'
 CC_PRINT_OPTIONS='YES'
 CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work/.CC_PRINT_OPTIONS'
 CFLAGS='-Os -arch x86_64'
 CPATH='/opt/local/include'
 CPPFLAGS='-I/opt/local/include'
 CXX='/usr/bin/g++-4.2'
 CXXFLAGS='-Os -arch x86_64'
 F77FLAGS='-m64'
 F90FLAGS='-Os -m64'
 FCFLAGS='-Os -m64'
 FFLAGS='-Os'
 INSTALL='/usr/bin/install -c'
 LDFLAGS='-Wl,-headerpad_max_install_names -arch x86_64'
 LIBRARY_PATH='/opt/local/lib'
 MACOSX_DEPLOYMENT_TARGET='10.6'
 OBJC='/usr/bin/gcc-4.2'
 OBJCFLAGS='-Os -arch x86_64'
 OBJCXX='/usr/bin/g++-4.2'
 OBJCXXFLAGS='-Os -arch x86_64'
 :debug:configure Assembled command: 'cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work/build"
 && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX=/opt/local
 -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON
 -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
 -DCMAKE_INSTALL_RPATH=/opt/local/lib
 -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
 -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
 -DCMAKE_MODULE_PATH=/opt/local/share/cmake/Modules
 -DCMAKE_FIND_FRAMEWORK=LAST -Wno-dev -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG"
 -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_OSX_ARCHITECTURES="x86_64"
 -DCMAKE_OSX_DEPLOYMENT_TARGET="10.6" -DCMAKE_OSX_SYSROOT="/" ../host-
 198b1e59c01f556a0d68fa2907c63482faf6c543'
 :debug:configure Executing command line:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work/build"
 && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX=/opt/local
 -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON
 -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
 -DCMAKE_INSTALL_RPATH=/opt/local/lib
 -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
 -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
 -DCMAKE_MODULE_PATH=/opt/local/share/cmake/Modules
 -DCMAKE_FIND_FRAMEWORK=LAST -Wno-dev -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG"
 -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_OSX_ARCHITECTURES="x86_64"
 -DCMAKE_OSX_DEPLOYMENT_TARGET="10.6" -DCMAKE_OSX_SYSROOT="/" ../host-
 198b1e59c01f556a0d68fa2907c63482faf6c543
 :info:configure -- The C compiler identification is GNU 4.2.1
 :info:configure -- The CXX compiler identification is GNU 4.2.1
 :info:configure CMake Warning at
 /opt/local/share/cmake-3.0/Modules/Platform/Darwin.cmake:324 (message):
 :info:configure   The SDK Library/Frameworks path
 :info:configure
 :info:configure    //Library/Frameworks
 :info:configure
 :info:configure   is not set up correctly on this system.  This is known
 to occur when
 :info:configure   installing Xcode 3.2.6:
 :info:configure
 :info:configure    http://bugs.python.org/issue14018
 :info:configure
 :info:configure   The problem may cause build errors that report missing
 system frameworks.
 :info:configure   Fix your SDK symlinks to resolve this issue and avoid
 this warning.
 :info:configure Call Stack (most recent call first):
 :info:configure
 /opt/local/share/cmake-3.0/Modules/CMakeSystemSpecificInformation.cmake:36
 (include)
 :info:configure   CMakeLists.txt:4 (project)
 :info:configure
 :info:configure
 :info:configure -- Checking whether C compiler has -isysroot
 :info:configure -- Checking whether C compiler has -isysroot - yes
 :info:configure -- Checking whether C compiler supports OSX deployment
 target flag
 :info:configure -- Checking whether C compiler supports OSX deployment
 target flag - yes
 :info:configure -- Check for working C compiler: /usr/bin/gcc-4.2
 :info:configure -- Check for working C compiler: /usr/bin/gcc-4.2 -- works
 :info:configure -- Detecting C compiler ABI info
 :info:configure -- Detecting C compiler ABI info - done
 :info:configure -- Checking whether CXX compiler has -isysroot
 :info:configure -- Checking whether CXX compiler has -isysroot - yes
 :info:configure -- Checking whether CXX compiler supports OSX deployment
 target flag
 :info:configure -- Checking whether CXX compiler supports OSX deployment
 target flag - yes
 :info:configure -- Check for working CXX compiler: /usr/bin/g++-4.2
 :info:configure -- Check for working CXX compiler: /usr/bin/g++-4.2 --
 works
 :info:configure -- Detecting CXX compiler ABI info
 :info:configure -- Detecting CXX compiler ABI info - done
 :info:configure -- Check if the system is big endian
 :info:configure -- Searching 16 bit integer
 :info:configure -- Looking for sys/types.h
 :info:configure -- Looking for sys/types.h - not found
 :info:configure -- Looking for stdint.h
 :info:configure -- Looking for stdint.h - not found
 :info:configure -- Looking for stddef.h
 :info:configure -- Looking for stddef.h - not found
 :info:configure -- Check size of unsigned short
 :info:configure -- Check size of unsigned short - failed
 :info:configure -- Check size of unsigned int
 :info:configure -- Check size of unsigned int - failed
 :info:configure -- Check size of unsigned long
 :info:configure -- Check size of unsigned long - failed
 :info:configure CMake Error at
 /opt/local/share/cmake-3.0/Modules/TestBigEndian.cmake:51 (message):
 :info:configure   no suitable type found
 :info:configure Call Stack (most recent call first):
 :info:configure   libairspy/CMakeLists.txt:73 (TEST_BIG_ENDIAN)
 :info:configure
 :info:configure
 :info:configure -- Configuring incomplete, errors occurred!
 :info:configure See also
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work/build/CMakeFiles/CMakeOutput.log".
 :info:configure See also
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work/build/CMakeFiles/CMakeError.log".
 :info:configure Command failed:  cd
 "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/work/build"
 && /opt/local/bin/cmake -DCMAKE_INSTALL_PREFIX=/opt/local
 -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_COLOR_MAKEFILE=ON
 -DCMAKE_BUILD_TYPE=Release -DCMAKE_BUILD_WITH_INSTALL_RPATH=ON
 -DCMAKE_INSTALL_RPATH=/opt/local/lib
 -DCMAKE_INSTALL_NAME_DIR=/opt/local/lib
 -DCMAKE_SYSTEM_PREFIX_PATH="/opt/local;/usr"
 -DCMAKE_MODULE_PATH=/opt/local/share/cmake/Modules
 -DCMAKE_FIND_FRAMEWORK=LAST -Wno-dev -DCMAKE_C_FLAGS_RELEASE="-DNDEBUG"
 -DCMAKE_CXX_FLAGS_RELEASE="-DNDEBUG" -DCMAKE_OSX_ARCHITECTURES="x86_64"
 -DCMAKE_OSX_DEPLOYMENT_TARGET="10.6" -DCMAKE_OSX_SYSROOT="/" ../host-
 198b1e59c01f556a0d68fa2907c63482faf6c543
 :info:configure Exit code: 1
 :error:configure org.macports.configure for port airspy returned:
 configure failure: command execution failed
 :debug:configure Error code: NONE
 :debug:configure Backtrace: configure failure: command execution failed
     while executing
 "portconfigure::configure_main org.macports.configure"
     ("eval" body line 1)
     invoked from within
 "eval $procedure $targetname"
 :info:configure Warning: targets not executed for airspy:
 org.macports.activate org.macports.configure org.macports.build
 org.macports.destroot org.macports.install
 :notice:configure Please see the log file for port airspy for details:
 /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_science_airspy/airspy/main.log

 }}}

-- 
Ticket URL: <https://trac.macports.org/ticket/46796>
MacPorts <https://www.macports.org/>
Ports system for OS X