#33846: aspell: build fails ----------------------------+----------------------------------------------- Reporter: amatasc@… | Owner: jochen@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: aspell ----------------------------+----------------------------------------------- Changes (by ryandesign@…): * cc: ryandesign@… (added) * owner: macports-tickets@… => jochen@… * port: => aspell Old description:
amatasc:~ amatasc$ sudo port -v selfupdate Password: Warning: xcodebuild exists but failed to execute ---> Updating MacPorts base sources using rsync receiving file list ... done base.tar
sent 10894 bytes received 111 bytes 3144.29 bytes/sec total size is 3236352 speedup is 294.08 receiving file list ... done base.tar.rmd160
sent 64 bytes received 116 bytes 72.00 bytes/sec total size is 512 speedup is 2.84 MacPorts base version 2.0.4 installed, MacPorts base version 2.0.4 downloaded. ---> Updating the ports tree Synchronizing local ports tree from rsync://rsync.macports.org/release/tarballs/ports.tar receiving file list ... done ports.tar
sent 49548 bytes received 1468 bytes 6001.88 bytes/sec total size is 49940992 speedup is 978.93 receiving file list ... done ports.tar.rmd160
sent 64 bytes received 636 bytes 280.00 bytes/sec total size is 512 speedup is 0.73 Warning: xcodebuild exists but failed to execute Creating port index in /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports
Total number of ports parsed: 0 Ports successfully parsed: 0 Ports failed: 0 Up-to-date ports skipped: 13779
---> MacPorts base is already the latest version
The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated amatasc:~ amatasc$ port upgrade outdated Error: No ports matched the given expression amatasc:~ amatasc$ sudo port upgrade outdated Warning: xcodebuild exists but failed to execute Error: No ports matched the given expression amatasc:~ amatasc$ port MacPorts 2.0.4 Entering interactive mode... ("help" for help, "quit" to quit) [Users/amatasc] > help port [-bcdfknopqRstuvy] [-D portdir] [-F cmdfile] action [privopts] [actionflags] [[portname|pseudo-portname|port-url] [@version] [+-variant]... [option=value]...]...
Supported actions ------------------ activate, archive, archivefetch, build, cat, cd, checksum, clean, configure, contents, deactivate, dependents, deps, destroot, dir, distcheck, distfiles, dmg, dpkg, echo, ed, edit, exit, extract, fetch, file, gohome, help, info, install, installed, lint, list, livecheck, load, location, log, logfile, mdmg, mirror, mpkg, notes, outdated, patch, pkg, platform, portpkg, provides, quit, rdependents, rdeps, rpm, search, select, selfupdate, setrequested, space, srpm, submit, sync, test, unarchive, uninstall, unload, unsetrequested, upgrade, url, usage, variants, version, work
Pseudo-portnames ---------------- Pseudo-portnames are words that may be used in place of a portname, and which expand to some set of ports. The common pseudo-portnames are: all, current, active, inactive, actinact, installed, uninstalled, outdated, obsolete, requested, unrequested and leaves. These pseudo-portnames expand to the set of ports named.
Pseudo-portnames starting with variants:, variant:, description:, depends:, depends_lib:, depends_run:, depends_build:, depends_fetch:, depends_extract:, portdir:, homepage:, epoch:, platforms:, platform:, name:, long_description:, maintainers:, maintainer:, categories:, category:, version:, revision:, and license: each select a set of ports based on a regex search of metadata about the ports. In all such cases, a standard regex pattern following the colon will be used to select the set of ports to which the pseudo-portname expands.
Pseudo-portnames starting with depof:, rdepof:, dependentof:, and rdependentof: select ports that are direct or recursive dependencies or dependents of the following portname, respectively.
Portnames that contain standard glob characters will be expanded to the set of ports matching the glob pattern.
Port expressions ---------------- Portnames, port glob patterns, and pseudo-portnames may be logically combined using expressions consisting of and, or, not, !, (, and ).
For more information -------------------- See man pages: port(1), macports.conf(5), portfile(7), portgroup(7), porthier(7), portstyle(7). Also, see http://www.macports.org.
[Users/amatasc] > quit Goodbye amatasc:~ amatasc$ sudo port install gedit Warning: xcodebuild exists but failed to execute Warning: Xcode appears to be installed but xcodebuild is unusable; some ports will likely fail to build. Warning: You may need to run `sudo xcode-select -switch /Applications/Xcode.app` ---> Computing dependencies for gedit ---> Dependencies to be installed: enchant aspell gettext expat expat libiconv gperf ncurses ncursesw gettext texinfo xz glib2 libffi perl5 perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell readline pkgconfig pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc docbook-xml docbook- xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar- list-utils p5.12-xml-parser intltool iso-codes iso-codes libxslt libxml2 libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit openssl python_select sqlite3 python27 rarian getopt rarian gnome-doc-utils gtk2 atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme pango Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-libxcb xorg- libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg-xextproto xorg- xf86bigfontproto xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb- util shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext autoconf help2man p5.12-locale-gettext m4 autoconf automake libtool xorg- util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg- libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg- xineramaproto xorg-libXrandr xorg-randrproto orbit2 libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject py27-gtk libglade2 py27-cairo py27-numpy fftw-3 py27-nose nosetests_select py27-distribute py27-py xorg-libsm xorg-libice ---> Fetching archive for expat ---> Attempting to fetch expat-2.0.1_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/expat ---> Fetching expat ---> Attempting to fetch expat-2.0.1.tar.gz from http://lil.fr.distfiles.macports.org/expat ---> Verifying checksum(s) for expat ---> Extracting expat ---> Configuring expat ---> Building expat ---> Staging expat into destroot ---> Installing expat @2.0.1_1 ---> Activating expat @2.0.1_1 ---> Cleaning expat ---> Cleaning expat ---> Fetching archive for gperf ---> Attempting to fetch gperf-3.0.4_2.darwin_11.x86_64.tbz2 from http://packages.macports.org/gperf ---> Fetching gperf ---> Attempting to fetch gperf-3.0.4.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gperf ---> Verifying checksum(s) for gperf ---> Extracting gperf ---> Applying patches to gperf ---> Configuring gperf ---> Building gperf ---> Staging gperf into destroot ---> Installing gperf @3.0.4_2 ---> Activating gperf @3.0.4_2 ---> Cleaning gperf ---> Fetching archive for libiconv ---> Attempting to fetch libiconv-1.14_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libiconv ---> Fetching libiconv ---> Attempting to fetch libiconv-1.14.tar.gz from http://lil.fr.distfiles.macports.org/libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ---> Building libiconv ---> Staging libiconv into destroot ---> Installing libiconv @1.14_0 ---> Activating libiconv @1.14_0 ---> Cleaning libiconv ---> Fetching archive for ncursesw ---> Attempting to fetch ncursesw-5.8_0.darwin_11.noarch.tbz2 from http://packages.macports.org/ncursesw ---> Fetching ncursesw ---> Verifying checksum(s) for ncursesw ---> Extracting ncursesw ---> Configuring ncursesw ---> Building ncursesw ---> Staging ncursesw into destroot ---> Installing ncursesw @5.8_0 ---> Activating ncursesw @5.8_0 ---> Cleaning ncursesw ---> Fetching archive for ncurses ---> Attempting to fetch ncurses-5.9_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/ncurses ---> Fetching ncurses ---> Attempting to fetch ncurses-5.9.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/ncurses ---> Verifying checksum(s) for ncurses ---> Extracting ncurses ---> Applying patches to ncurses ---> Configuring ncurses ---> Building ncurses ---> Staging ncurses into destroot ---> Installing ncurses @5.9_1 ---> Activating ncurses @5.9_1 ---> Cleaning ncurses ---> Fetching archive for gettext ---> Attempting to fetch gettext-0.18.1.1_2.darwin_11.x86_64.tbz2 from http://packages.macports.org/gettext ---> Fetching gettext ---> Attempting to fetch gettext-0.18.1.1.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext ---> Staging gettext into destroot ---> Installing gettext @0.18.1.1_2 ---> Activating gettext @0.18.1.1_2 ---> Cleaning gettext ---> Cleaning gettext ---> Fetching archive for xz ---> Attempting to fetch xz-5.0.3_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/xz ---> Fetching xz ---> Attempting to fetch xz-5.0.3.tar.bz2 from http://lil.fr.distfiles.macports.org/xz ---> Verifying checksum(s) for xz ---> Extracting xz ---> Configuring xz ---> Building xz ---> Staging xz into destroot ---> Installing xz @5.0.3_0 ---> Activating xz @5.0.3_0 ---> Cleaning xz ---> Fetching archive for texinfo ---> Attempting to fetch texinfo-4.13_2.darwin_11.x86_64.tbz2 from http://packages.macports.org/texinfo ---> Fetching texinfo ---> Attempting to fetch texinfo-4.13.tar.lzma from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/texinfo ---> Verifying checksum(s) for texinfo ---> Extracting texinfo ---> Configuring texinfo ---> Building texinfo ---> Staging texinfo into destroot ---> Installing texinfo @4.13_2 ---> Activating texinfo @4.13_2 ---> Cleaning texinfo ---> Fetching archive for aspell ---> Attempting to fetch aspell-0.60.6_4+nonls.darwin_11.x86_64.tbz2 from http://packages.macports.org/aspell ---> Fetching aspell ---> Attempting to fetch aspell-0.60.6.tar.gz from ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for aspell ---> Extracting aspell ---> Applying patches to aspell ---> Configuring aspell ---> Building aspell Error: Target org.macports.build returned: shell command failed (see log for details) Error: Failed to install aspell Log for aspell is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_textproc_aspell/aspell/main.log Error: The following dependencies were not installed: enchant aspell glib2 libffi perl5 perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell readline pkgconfig pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-utils p5.12-xml-parser intltool iso-codes iso-codes libxslt libxml2 libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit openssl python_select sqlite3 python27 rarian getopt rarian gnome-doc- utils gtk2 atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme pango Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg- libxcb xorg-libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg- xextproto xorg-xf86bigfontproto xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb-util shared-mime-info xorg-libXcomposite xorg- compositeproto xorg-libXext autoconf help2man p5.12-locale-gettext m4 autoconf automake libtool xorg-util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg- libXinerama xorg-xineramaproto xorg-libXrandr xorg-randrproto orbit2 libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject py27-gtk libglade2 py27-cairo py27-numpy fftw-3 py27-nose nosetests_select py27-distribute py27-py xorg-libsm xorg-libice Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> amatasc:~ amatasc$
New description: {{{ amatasc:~ amatasc$ sudo port -v selfupdate Password: Warning: xcodebuild exists but failed to execute ---> Updating MacPorts base sources using rsync receiving file list ... done base.tar sent 10894 bytes received 111 bytes 3144.29 bytes/sec total size is 3236352 speedup is 294.08 receiving file list ... done base.tar.rmd160 sent 64 bytes received 116 bytes 72.00 bytes/sec total size is 512 speedup is 2.84 MacPorts base version 2.0.4 installed, MacPorts base version 2.0.4 downloaded. ---> Updating the ports tree Synchronizing local ports tree from rsync://rsync.macports.org/release/tarballs/ports.tar receiving file list ... done ports.tar sent 49548 bytes received 1468 bytes 6001.88 bytes/sec total size is 49940992 speedup is 978.93 receiving file list ... done ports.tar.rmd160 sent 64 bytes received 636 bytes 280.00 bytes/sec total size is 512 speedup is 0.73 Warning: xcodebuild exists but failed to execute Creating port index in /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports Total number of ports parsed: 0 Ports successfully parsed: 0 Ports failed: 0 Up-to-date ports skipped: 13779 ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated amatasc:~ amatasc$ port upgrade outdated Error: No ports matched the given expression amatasc:~ amatasc$ sudo port upgrade outdated Warning: xcodebuild exists but failed to execute Error: No ports matched the given expression amatasc:~ amatasc$ port MacPorts 2.0.4 Entering interactive mode... ("help" for help, "quit" to quit) [Users/amatasc] > help port [-bcdfknopqRstuvy] [-D portdir] [-F cmdfile] action [privopts] [actionflags] [[portname|pseudo-portname|port-url] [@version] [+-variant]... [option=value]...]... Supported actions ------------------ activate, archive, archivefetch, build, cat, cd, checksum, clean, configure, contents, deactivate, dependents, deps, destroot, dir, distcheck, distfiles, dmg, dpkg, echo, ed, edit, exit, extract, fetch, file, gohome, help, info, install, installed, lint, list, livecheck, load, location, log, logfile, mdmg, mirror, mpkg, notes, outdated, patch, pkg, platform, portpkg, provides, quit, rdependents, rdeps, rpm, search, select, selfupdate, setrequested, space, srpm, submit, sync, test, unarchive, uninstall, unload, unsetrequested, upgrade, url, usage, variants, version, work Pseudo-portnames ---------------- Pseudo-portnames are words that may be used in place of a portname, and which expand to some set of ports. The common pseudo-portnames are: all, current, active, inactive, actinact, installed, uninstalled, outdated, obsolete, requested, unrequested and leaves. These pseudo-portnames expand to the set of ports named. Pseudo-portnames starting with variants:, variant:, description:, depends:, depends_lib:, depends_run:, depends_build:, depends_fetch:, depends_extract:, portdir:, homepage:, epoch:, platforms:, platform:, name:, long_description:, maintainers:, maintainer:, categories:, category:, version:, revision:, and license: each select a set of ports based on a regex search of metadata about the ports. In all such cases, a standard regex pattern following the colon will be used to select the set of ports to which the pseudo-portname expands. Pseudo-portnames starting with depof:, rdepof:, dependentof:, and rdependentof: select ports that are direct or recursive dependencies or dependents of the following portname, respectively. Portnames that contain standard glob characters will be expanded to the set of ports matching the glob pattern. Port expressions ---------------- Portnames, port glob patterns, and pseudo-portnames may be logically combined using expressions consisting of and, or, not, !, (, and ). For more information -------------------- See man pages: port(1), macports.conf(5), portfile(7), portgroup(7), porthier(7), portstyle(7). Also, see http://www.macports.org. [Users/amatasc] > quit Goodbye amatasc:~ amatasc$ sudo port install gedit Warning: xcodebuild exists but failed to execute Warning: Xcode appears to be installed but xcodebuild is unusable; some ports will likely fail to build. Warning: You may need to run `sudo xcode-select -switch /Applications/Xcode.app` ---> Computing dependencies for gedit ---> Dependencies to be installed: enchant aspell gettext expat expat libiconv gperf ncurses ncursesw gettext texinfo xz glib2 libffi perl5 perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell readline pkgconfig pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc docbook-xml docbook- xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list- utils p5.12-xml-parser intltool iso-codes iso-codes libxslt libxml2 libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit openssl python_select sqlite3 python27 rarian getopt rarian gnome-doc-utils gtk2 atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme pango Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg-inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-libxcb xorg- libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg-xextproto xorg- xf86bigfontproto xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb- util shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext autoconf help2man p5.12-locale-gettext m4 autoconf automake libtool xorg- util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg- libXrandr xorg-randrproto orbit2 libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject py27-gtk libglade2 py27-cairo py27-numpy fftw-3 py27-nose nosetests_select py27-distribute py27-py xorg-libsm xorg-libice ---> Fetching archive for expat ---> Attempting to fetch expat-2.0.1_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/expat ---> Fetching expat ---> Attempting to fetch expat-2.0.1.tar.gz from http://lil.fr.distfiles.macports.org/expat ---> Verifying checksum(s) for expat ---> Extracting expat ---> Configuring expat ---> Building expat ---> Staging expat into destroot ---> Installing expat @2.0.1_1 ---> Activating expat @2.0.1_1 ---> Cleaning expat ---> Cleaning expat ---> Fetching archive for gperf ---> Attempting to fetch gperf-3.0.4_2.darwin_11.x86_64.tbz2 from http://packages.macports.org/gperf ---> Fetching gperf ---> Attempting to fetch gperf-3.0.4.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gperf ---> Verifying checksum(s) for gperf ---> Extracting gperf ---> Applying patches to gperf ---> Configuring gperf ---> Building gperf ---> Staging gperf into destroot ---> Installing gperf @3.0.4_2 ---> Activating gperf @3.0.4_2 ---> Cleaning gperf ---> Fetching archive for libiconv ---> Attempting to fetch libiconv-1.14_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/libiconv ---> Fetching libiconv ---> Attempting to fetch libiconv-1.14.tar.gz from http://lil.fr.distfiles.macports.org/libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ---> Building libiconv ---> Staging libiconv into destroot ---> Installing libiconv @1.14_0 ---> Activating libiconv @1.14_0 ---> Cleaning libiconv ---> Fetching archive for ncursesw ---> Attempting to fetch ncursesw-5.8_0.darwin_11.noarch.tbz2 from http://packages.macports.org/ncursesw ---> Fetching ncursesw ---> Verifying checksum(s) for ncursesw ---> Extracting ncursesw ---> Configuring ncursesw ---> Building ncursesw ---> Staging ncursesw into destroot ---> Installing ncursesw @5.8_0 ---> Activating ncursesw @5.8_0 ---> Cleaning ncursesw ---> Fetching archive for ncurses ---> Attempting to fetch ncurses-5.9_1.darwin_11.x86_64.tbz2 from http://packages.macports.org/ncurses ---> Fetching ncurses ---> Attempting to fetch ncurses-5.9.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/ncurses ---> Verifying checksum(s) for ncurses ---> Extracting ncurses ---> Applying patches to ncurses ---> Configuring ncurses ---> Building ncurses ---> Staging ncurses into destroot ---> Installing ncurses @5.9_1 ---> Activating ncurses @5.9_1 ---> Cleaning ncurses ---> Fetching archive for gettext ---> Attempting to fetch gettext-0.18.1.1_2.darwin_11.x86_64.tbz2 from http://packages.macports.org/gettext ---> Fetching gettext ---> Attempting to fetch gettext-0.18.1.1.tar.gz from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext ---> Staging gettext into destroot ---> Installing gettext @0.18.1.1_2 ---> Activating gettext @0.18.1.1_2 ---> Cleaning gettext ---> Cleaning gettext ---> Fetching archive for xz ---> Attempting to fetch xz-5.0.3_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/xz ---> Fetching xz ---> Attempting to fetch xz-5.0.3.tar.bz2 from http://lil.fr.distfiles.macports.org/xz ---> Verifying checksum(s) for xz ---> Extracting xz ---> Configuring xz ---> Building xz ---> Staging xz into destroot ---> Installing xz @5.0.3_0 ---> Activating xz @5.0.3_0 ---> Cleaning xz ---> Fetching archive for texinfo ---> Attempting to fetch texinfo-4.13_2.darwin_11.x86_64.tbz2 from http://packages.macports.org/texinfo ---> Fetching texinfo ---> Attempting to fetch texinfo-4.13.tar.lzma from http://www.mirrorservice.org/sites/ftp.gnu.org/gnu/texinfo ---> Verifying checksum(s) for texinfo ---> Extracting texinfo ---> Configuring texinfo ---> Building texinfo ---> Staging texinfo into destroot ---> Installing texinfo @4.13_2 ---> Activating texinfo @4.13_2 ---> Cleaning texinfo ---> Fetching archive for aspell ---> Attempting to fetch aspell-0.60.6_4+nonls.darwin_11.x86_64.tbz2 from http://packages.macports.org/aspell ---> Fetching aspell ---> Attempting to fetch aspell-0.60.6.tar.gz from ftp://ftp.uk.FreeBSD.org/pub/FreeBSD/ports/distfiles/ ---> Verifying checksum(s) for aspell ---> Extracting aspell ---> Applying patches to aspell ---> Configuring aspell ---> Building aspell Error: Target org.macports.build returned: shell command failed (see log for details) Error: Failed to install aspell Log for aspell is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_textproc_aspell/aspell/main.log Error: The following dependencies were not installed: enchant aspell glib2 libffi perl5 perl5.12 gdbm perl5.12 perl5 perl5 zlib glib2 hunspell readline pkgconfig pkgconfig pkgconfig gconf dbus-glib dbus gtk-doc docbook-xml docbook-xml-4.1.2 xmlcatmgr docbook-xml-4.2 docbook-xml-4.3 docbook-xml-4.4 docbook-xml-4.5 docbook-xml-5.0 docbook-xsl docbook-xsl gnome-doc-utils intltool gnome-common p5.12-getopt-long p5.12-pathtools p5.12-scalar-list-utils p5.12-xml-parser intltool iso-codes iso-codes libxslt libxml2 libxml2 libxslt py27-libxml2 python27 bzip2 db46 libedit openssl python_select sqlite3 python27 rarian getopt rarian gnome-doc- utils gtk2 atk gdk-pixbuf2 jasper jpeg libpng tiff hicolor-icon-theme pango Xft2 fontconfig freetype xrender xorg-libX11 xorg-bigreqsproto xorg- inputproto xorg-kbproto xorg-libXau xorg-xproto xorg-libXdmcp xorg-libxcb xorg-libpthread-stubs xorg-xcb-proto xorg-xcmiscproto xorg-xextproto xorg- xf86bigfontproto xorg-xtrans xorg-renderproto cairo libpixman xorg-xcb- util shared-mime-info xorg-libXcomposite xorg-compositeproto xorg-libXext autoconf help2man p5.12-locale-gettext m4 autoconf automake libtool xorg- util-macros xorg-libXfixes xorg-fixesproto xorg-libXcursor xorg-libXdamage xorg-damageproto xorg-libXi xorg-libXinerama xorg-xineramaproto xorg- libXrandr xorg-randrproto orbit2 libidl policykit eggdbus py27-pygtksourceview gtksourceview2 py27-gobject py27-gtk libglade2 py27-cairo py27-numpy fftw-3 py27-nose nosetests_select py27-distribute py27-py xorg-libsm xorg-libice Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> amatasc:~ amatasc$ }}} -- Comment: Please remember to use WikiFormatting when writing in Trac, and preview before submitting to ensure you got it right. You've pasted a lot of irrelevant terminal output above. The ultimate error appears to be that aspell failed to build. It's impossible for us to know why this happened unless we see aspell's main.log file, so please attach it. The output also included this very important message: {{{ Warning: xcodebuild exists but failed to execute Warning: Xcode appears to be installed but xcodebuild is unusable; some ports will likely fail to build. Warning: You may need to run `sudo xcode-select -switch /Applications/Xcode.app` }}} You should follow this suggestion, and if you need further help getting xcodebuild to work properly, write to the macports-users mailing list. -- Ticket URL: <https://trac.macports.org/ticket/33846#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS