[MacPorts] #24275: mutt-devel @1.5.20_2 fails to install with +sasl
#24275: mutt-devel @1.5.20_2 fails to install with +sasl ------------------------------+--------------------------------------------- Reporter: bill@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: ------------------------------+--------------------------------------------- When installing mutt-devel on OSX 10.6.2 I get the following: sudo port install -d mutt-devel +gdbm+headercache+imap+pop+smtp+ssl+sasl+sidebar+universal ---> Computing dependencies for mutt-devel ---> Configuring mutt-devel Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.20" && ./configure --prefix=/opt/local --disable-dependency-tracking --disable-warnings --mandir=/opt/local/share/man --with-docdir=/opt/local/share/doc/mutt --with-libiconv-prefix=/opt/local --with-curses=/opt/local --enable-pop --enable-imap --with-ssl=/opt/local --with-sasl=/opt/local --enable-hcache --enable-gdbm --without-bdb --without-qdbm --without-tokyocabinet --enable-smtp " returned error 1 Command output: checking getopt.h presence... yes checking for getopt.h... yes checking for snprintf... yes checking for vsnprintf... yes checking whether your system's snprintf is C99 compliant... yes checking whether your system's vsnprintf is C99 compliant... yes checking for va_copy... va_copy checking for ftruncate... yes checking for strftime... yes checking for fchdir... yes checking for regcomp... yes checking whether your system's regexp library is completely broken... no checking where new mail is stored... /var/mail checking if /var/mail is world writable... no checking if /var/mail is group writable... yes checking where to put the documentation... /opt/local/share/doc/mutt checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for socklen_t... yes checking for gethostent... yes checking for setsockopt... yes checking for getaddrinfo... yes checking for deflate in -lz... yes checking for X509_new in -lcrypto... yes checking for SSL_new in -lssl... yes checking for RAND_status... yes checking for RAND_egd... yes checking for sasl_client_init in -lsasl2... no configure: error: could not find libsasl2 Installation without +sasl completes normally. -- Ticket URL: <http://trac.macports.org/ticket/24275> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24275: mutt-devel @1.5.20_2 fails to install with +sasl ------------------------------+--------------------------------------------- Reporter: bill@… | Owner: simon@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: mutt-devel ------------------------------+--------------------------------------------- Changes (by jmr@…): * owner: macports-tickets@… => simon@… * port: => mutt-devel Old description:
When installing mutt-devel on OSX 10.6.2 I get the following:
sudo port install -d mutt-devel +gdbm+headercache+imap+pop+smtp+ssl+sasl+sidebar+universal ---> Computing dependencies for mutt-devel ---> Configuring mutt-devel Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.20" && ./configure --prefix=/opt/local --disable-dependency-tracking --disable-warnings --mandir=/opt/local/share/man --with-docdir=/opt/local/share/doc/mutt --with-libiconv-prefix=/opt/local --with-curses=/opt/local --enable-pop --enable-imap --with-ssl=/opt/local --with-sasl=/opt/local --enable- hcache --enable-gdbm --without-bdb --without-qdbm --without-tokyocabinet --enable-smtp " returned error 1 Command output: checking getopt.h presence... yes checking for getopt.h... yes checking for snprintf... yes checking for vsnprintf... yes checking whether your system's snprintf is C99 compliant... yes checking whether your system's vsnprintf is C99 compliant... yes checking for va_copy... va_copy checking for ftruncate... yes checking for strftime... yes checking for fchdir... yes checking for regcomp... yes checking whether your system's regexp library is completely broken... no checking where new mail is stored... /var/mail checking if /var/mail is world writable... no checking if /var/mail is group writable... yes checking where to put the documentation... /opt/local/share/doc/mutt checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for socklen_t... yes checking for gethostent... yes checking for setsockopt... yes checking for getaddrinfo... yes checking for deflate in -lz... yes checking for X509_new in -lcrypto... yes checking for SSL_new in -lssl... yes checking for RAND_status... yes checking for RAND_egd... yes checking for sasl_client_init in -lsasl2... no configure: error: could not find libsasl2
Installation without +sasl completes normally.
New description: When installing mutt-devel on OSX 10.6.2 I get the following: {{{ sudo port install -d mutt-devel +gdbm+headercache+imap+pop+smtp+ssl+sasl+sidebar+universal ---> Computing dependencies for mutt-devel ---> Configuring mutt-devel Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.20" && ./configure --prefix=/opt/local --disable-dependency-tracking --disable-warnings --mandir=/opt/local/share/man --with-docdir=/opt/local/share/doc/mutt --with-libiconv-prefix=/opt/local --with-curses=/opt/local --enable-pop --enable-imap --with-ssl=/opt/local --with-sasl=/opt/local --enable-hcache --enable-gdbm --without-bdb --without-qdbm --without-tokyocabinet --enable-smtp " returned error 1 Command output: checking getopt.h presence... yes checking for getopt.h... yes checking for snprintf... yes checking for vsnprintf... yes checking whether your system's snprintf is C99 compliant... yes checking whether your system's vsnprintf is C99 compliant... yes checking for va_copy... va_copy checking for ftruncate... yes checking for strftime... yes checking for fchdir... yes checking for regcomp... yes checking whether your system's regexp library is completely broken... no checking where new mail is stored... /var/mail checking if /var/mail is world writable... no checking if /var/mail is group writable... yes checking where to put the documentation... /opt/local/share/doc/mutt checking sys/select.h usability... yes checking sys/select.h presence... yes checking for sys/select.h... yes checking for socklen_t... yes checking for gethostent... yes checking for setsockopt... yes checking for getaddrinfo... yes checking for deflate in -lz... yes checking for X509_new in -lcrypto... yes checking for SSL_new in -lssl... yes checking for RAND_status... yes checking for RAND_egd... yes checking for sasl_client_init in -lsasl2... no configure: error: could not find libsasl2 }}} Installation without +sasl completes normally. -- Comment: Please remember to preview and use WikiFormatting, fill in the Port field, and cc the maintainer. -- Ticket URL: <http://trac.macports.org/ticket/24275#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24275: mutt-devel @1.5.20_2 fails to install with +sasl ------------------------------+--------------------------------------------- Reporter: bill@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: mutt-devel ------------------------------+--------------------------------------------- Changes (by simon@…): * owner: simon@… => macports-tickets@… -- Ticket URL: <http://trac.macports.org/ticket/24275#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24275: mutt-devel @1.5.20_2 fails to install with +sasl ------------------------------+--------------------------------------------- Reporter: bill@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: mutt-devel ------------------------------+--------------------------------------------- Comment(by jmr@…): Is this still the case with 1.5.21? -- Ticket URL: <https://trac.macports.org/ticket/24275#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24275: mutt-devel @1.5.20_2 fails to install with +sasl ------------------------------+--------------------------------------------- Reporter: bill@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: mutt-devel ------------------------------+--------------------------------------------- Comment(by bill@…): Here is the result now. {{{
sudo port install -d mutt-devel +gdbm+headercache+imap+pop+smtp+ssl+sasl+sidebar+universal ---> Computing dependencies for cyrus-sasl2 ---> Fetching cyrus-sasl2 ---> Attempting to fetch cyrus-sasl-2.1.23.tar.gz from http://distfiles.macports.org/cyrus-sasl2 ---> Verifying checksum(s) for cyrus-sasl2 ---> Extracting cyrus-sasl2 ---> Applying patches to cyrus-sasl2 ---> Configuring cyrus-sasl2 ---> Building cyrus-sasl2 ---> Staging cyrus-sasl2 into destroot ---> Computing dependencies for cyrus-sasl2 ---> Installing cyrus-sasl2 @2.1.23_3+kerberos+universal ---> Deactivating cyrus-sasl2 @2.1.23_3+kerberos ---> Cleaning cyrus-sasl2 ---> Activating cyrus-sasl2 @2.1.23_3+kerberos+universal ---> Cleaning cyrus-sasl2 ---> Computing dependencies for mutt-devel ---> Fetching mutt-devel ---> Attempting to fetch patch-1.5.20.sidebar.20090619.txt from http://distfiles.macports.org/mutt-devel ---> Attempting to fetch patch-1.5.20.sidebar.20090619.txt from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/mutt-devel ---> Attempting to fetch patch-1.5.20.sidebar.20090619.txt from http://lil.fr.distfiles.macports.org/mutt-devel ---> Attempting to fetch patch-1.5.20.sidebar.20090619.txt from http://aarnet.au.distfiles.macports.org/pub/macports/mpdistfiles/mutt- devel ---> Attempting to fetch patch-1.5.20.sidebar.20090619.txt from http ://lunar-linux.org/~tchan/mutt/ ---> Attempting to fetch mutt-1.5.21.tar.gz from http://distfiles.macports.org/mutt-devel ---> Attempting to fetch mutt-1.5.21.tar.gz from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/mutt-devel ---> Attempting to fetch mutt-1.5.21.tar.gz from http://lil.fr.distfiles.macports.org/mutt-devel ---> Attempting to fetch mutt-1.5.21.tar.gz from ftp://ftp.mutt.org/mutt/devel/ ---> Verifying checksum(s) for mutt-devel ---> Extracting mutt-devel ---> Applying patches to mutt-devel Error: Target org.macports.patch returned: shell command failed (see log for details) Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}}
And the log /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/main.log {{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 +universal is the latest installed :debug:main gettext 0.18.1.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.13.1_0 exists in the ports tree :debug:main libiconv 1.13.1_0 +universal is the latest installed :debug:main libiconv 1.13.1_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.7_1 exists in the ports tree :debug:main ncurses 5.7_1 +universal is the latest installed :debug:main ncurses 5.7_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncursesw 5.7_1 exists in the ports tree :debug:main ncursesw 5.7_1 +universal is the latest installed :debug:main ncursesw 5.7_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 +universal is the latest installed :debug:main expat 2.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0c_0 exists in the ports tree :debug:main openssl 1.0.0c_0 +universal is the latest installed :debug:main openssl 1.0.0c_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! openssl 1.0.0c_0 >= openssl 1.0.0c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 +universal is the latest installed :debug:main zlib 1.2.5_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main cyrus-sasl2 2.1.23_3 exists in the ports tree :debug:main cyrus-sasl2 2.1.23_3 +kerberos is the latest installed :debug:main cyrus-sasl2 2.1.23_3 +kerberos+universal is active :debug:main Merging existing variants '+kerberos+universal' into variants :debug:main new fully merged portvariants: universal + kerberos + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security /cyrus-sasl2 :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main Executing variant kerberos provides kerberos :debug:main No need to upgrade! cyrus-sasl2 2.1.23_3 >= cyrus-sasl2 2.1.23_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.8.3_3 exists in the ports tree :debug:main gdbm 1.8.3_3 +universal is the latest installed :debug:main gdbm 1.8.3_3 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 :msg:main ---> Computing dependencies for mutt-devel:info:main .:debug:main Searching for dependency: gettext :debug:main Found Dependency: receipt exists for gettext :debug:main Searching for dependency: libiconv :debug:main Found Dependency: receipt exists for libiconv :debug:main Searching for dependency: ncurses :debug:main Found Dependency: receipt exists for ncurses :debug:main Searching for dependency: openssl :debug:main Found Dependency: receipt exists for openssl :debug:main Searching for dependency: cyrus-sasl2 :debug:main Found Dependency: receipt exists for cyrus-sasl2 :debug:main Searching for dependency: gdbm :debug:main Found Dependency: receipt exists for gdbm :msg:main :debug:main Executing org.macports.main (mutt-devel) :debug:main Skipping completed org.macports.fetch (mutt-devel) :debug:main Skipping completed org.macports.checksum (mutt-devel) :debug:main Skipping completed org.macports.extract (mutt-devel) :debug:patch patch phase started at Sun Jan 23 13:04:44 MST 2011 :debug:patch Executing org.macports.patch (mutt-devel) :msg:patch ---> Applying patches to mutt-devel :info:patch ---> Applying /opt/local/var/macports/distfiles/mutt- devel/patch-1.5.20.sidebar.20090619.txt :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.21" && /usr/bin/patch -p0 -p1' :info:patch patching file buffy.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 6 out of 6 hunks ignored -- saving rejects to file buffy.c.rej :info:patch patching file buffy.h :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file buffy.h.rej :info:patch patching file color.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file color.c.rej :info:patch patching file compose.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 12 out of 12 hunks ignored -- saving rejects to file compose.c.rej :info:patch patching file curs_main.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 9 out of 9 hunks ignored -- saving rejects to file curs_main.c.rej :info:patch patching file flags.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 2 out of 2 hunks ignored -- saving rejects to file flags.c.rej :info:patch patching file functions.h :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 2 out of 2 hunks ignored -- saving rejects to file functions.h.rej :info:patch patching file globals.h :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 2 out of 2 hunks ignored -- saving rejects to file globals.h.rej :info:patch patching file init.h :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file init.h.rej :info:patch patching file mailbox.h :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file mailbox.h.rej :info:patch patching file Makefile.am :info:patch Hunk #1 FAILED at 29. :info:patch 1 out of 1 hunk FAILED -- saving rejects to file Makefile.am.rej :info:patch patching file Makefile.in :info:patch Hunk #1 FAILED at 85. :info:patch Hunk #2 FAILED at 357. :info:patch Hunk #3 FAILED at 390. :info:patch 3 out of 3 hunks FAILED -- saving rejects to file Makefile.in.rej :info:patch patching file mbox.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 2 out of 2 hunks ignored -- saving rejects to file mbox.c.rej :info:patch patching file menu.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 10 out of 10 hunks ignored -- saving rejects to file menu.c.rej :info:patch patching file mutt_curses.h :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 2 out of 2 hunks ignored -- saving rejects to file mutt_curses.h.rej :info:patch patching file mutt.h :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 3 out of 3 hunks ignored -- saving rejects to file mutt.h.rej :info:patch patching file muttlib.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 2 out of 2 hunks ignored -- saving rejects to file muttlib.c.rej :info:patch patching file mx.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 3 out of 3 hunks ignored -- saving rejects to file mx.c.rej :info:patch patching file OPS :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file OPS.rej :info:patch patching file pager.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 8 out of 8 hunks ignored -- saving rejects to file pager.c.rej :info:patch patching file PATCHES :info:patch The next patch would create the file sidebar.c, :info:patch which already exists! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file sidebar.c.rej :info:patch The next patch would create the file sidebar.h, :info:patch which already exists! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file sidebar.h.rej :info:patch patching file doc/Muttrc :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file doc/Muttrc.rej :info:patch patching file imap/imap.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file imap/imap.c.rej :info:patch patching file imap/command.c :info:patch Reversed (or previously applied) patch detected! Assume -R? [n] :info:patch Apply anyway? [n] :info:patch Skipping patch. :info:patch 1 out of 1 hunk ignored -- saving rejects to file imap/command.c.rej :info:patch shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.21" && /usr/bin/patch -p0 -p1 < '/opt/local/var/macports/distfiles/mutt- devel/patch-1.5.20.sidebar.20090619.txt'" returned error 1 :error:patch Target org.macports.patch returned: shell command failed (see log for details) :debug:patch Backtrace: shell command failed (see log for details) while executing "command_exec patch "" "< '$patch'"" (procedure "portpatch::patch_main" line 35) invoked from within "$procedure $targetname" :info:patch Warning: the following items did not execute (for mutt-devel): org.macports.activate org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:patch Log for mutt-devel is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/main.log }}} -- Ticket URL: <https://trac.macports.org/ticket/24275#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24275: mutt-devel @1.5.20_2 fails to install with +sasl ------------------------------+--------------------------------------------- Reporter: bill@… | Owner: mnick@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: mutt-devel ------------------------------+--------------------------------------------- Changes (by jmr@…): * owner: macports-tickets@… => mnick@… -- Ticket URL: <https://trac.macports.org/ticket/24275#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24275: mutt-devel @1.5.20_2 fails to install with +sasl -------------------------+-------------------------------- Reporter: bill@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Resolution: | Keywords: Port: mutt-devel | -------------------------+-------------------------------- Changes (by macsforever2000@…): * owner: mnick@… => macports-tickets@… Comment: mnick has retired. -- Ticket URL: <https://trac.macports.org/ticket/24275#comment:6> MacPorts <http://www.macports.org/> Ports system for OS X
#24275: mutt-devel @1.5.20_2 fails to install with +sasl -------------------------+-------------------------------- Reporter: bill@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Resolution: fixed | Keywords: Port: mutt-devel | -------------------------+-------------------------------- Changes (by ryandesign@…): * status: new => closed * cc: ryandesign@… (added) * resolution: => fixed Comment: I am not able to reproduce this problem today; it must've gotten fixed somewhere along the way. -- Ticket URL: <https://trac.macports.org/ticket/24275#comment:7> MacPorts <http://www.macports.org/> Ports system for OS X
participants (1)
-
MacPorts