#47354: pstoedit 3.70 does not have most of the available drivers that 3.62 did -----------------------------+-------------------------------- Reporter: darrell.lamm@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: pstoedit | -----------------------------+-------------------------------- Changes (by ryandesign@…): * keywords: pstoedit => Old description:

Previous version of pstoedit (3.62) provided the following formats: =====================================================

psf: .fps: Flattened PostScript (no curves) (built-in) ------------------------------------------- ps: .spsc: Simplified PostScript with curves (built-in) ------------------------------------------- debug: .dbg: for test purposes (built- in) ------------------------------------------- dump: .dbg: for test purposes (same as debug) (built-in) ------------------------------------------- gs: .gs: any device that GhostScript provides - use gs:format, e.g. gs:pdfwrite (built-in) ------------------------------------------- ps2ai: .ai: Adobe Illustrator via ps2ai.ps of GhostScript (built-in) ------------------------------------------- gmfa: .meta: ASCII GNU metafile (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- gmfb: .meta: binary GNU metafile (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot: .plot: GNU libplot output types, e.g. plot:-plotformat X (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-cgm: .cgm: cgm via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-ai: .ai: ai via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-svg: .svg: svg via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-ps: .ps: ps via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-fig: .fig: fig via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-pcl: .pcl: pcl via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-hpgl: .hpgl: hpgl via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-tek: .tek: tek via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- magick: ....: MAGICK driver (/opt/local/lib/pstoedit/libp2edrvmagick++.0.so) ------------------------------------------- gcode: .gcode: emc2 gcode format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- cairo: .c: cairo driver (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -pango : boolean : use pango for font rendering] [ -funcname : string : sets the base name for the generated functions and variables. e.g. myfig] [ -header : string : sets the output file name for the generated C header file. e.g. myfig.h] ------------------------------------------- lwo: .lwo: LightWave 3D Object Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- rib: .rib: RenderMan Interface Bytestream (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- rpl: .rpl: Real3D Programming Language Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- dxf: .dxf: CAD exchange format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -polyaslines : boolean : use LINE instead of POLYLINE in DXF] [ -mm : boolean : use mm coordinates instead of points in DXF (mm=pt/72*25.4)] [ -ctl : boolean : map colors to layers] [ -splineaspolyline : boolean : approximate splines with PolyLines (only for -f dxf_s)] [ -splineasnurb : boolean : experimental (only for -f dxf_s)] [ -splineasbspline : boolean : experimental (only for -f dxf_s)] [-splineassinglespline : boolean : experimental (only for -f dxf_s)] [-splineasmultispline : boolean : experimental (only for -f dxf_s)] [ -splineasbezier : boolean : use Bezier splines in DXF format (only for -f dxf_s)] [ -splineprecision : integer : number of samples to take from spline curve when doing approximation with -splineaspolyline or -splineasmultispline - should be >=2 (default 5)] [ -dumplayernames : boolean : dump all layer names found to standard output] [ -layers : string : layers to be shown (comma separated list of layer names, no space)] [ -layerfilter : string : layers to be hidden (comma separated list of layer names, no space)] ------------------------------------------- dxf_s: .dxf: CAD exchange format with splines (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -polyaslines : boolean : use LINE instead of POLYLINE in DXF] [ -mm : boolean : use mm coordinates instead of points in DXF (mm=pt/72*25.4)] [ -ctl : boolean : map colors to layers] [ -splineaspolyline : boolean : approximate splines with PolyLines (only for -f dxf_s)] [ -splineasnurb : boolean : experimental (only for -f dxf_s)] [ -splineasbspline : boolean : experimental (only for -f dxf_s)] [-splineassinglespline : boolean : experimental (only for -f dxf_s)] [-splineasmultispline : boolean : experimental (only for -f dxf_s)] [ -splineasbezier : boolean : use Bezier splines in DXF format (only for -f dxf_s)] [ -splineprecision : integer : number of samples to take from spline curve when doing approximation with -splineaspolyline or -splineasmultispline - should be >=2 (default 5)] [ -dumplayernames : boolean : dump all layer names found to standard output] [ -layers : string : layers to be shown (comma separated list of layer names, no space)] [ -layerfilter : string : layers to be hidden (comma separated list of layer names, no space)] ------------------------------------------- java1: .java: java 1 applet source code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ java class name : string : name of java class to generate] ------------------------------------------- java2: .java2: java 2 source code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ java class name : string : name of java class to generate] ------------------------------------------- pdf: .pdf: Adobe's Portable Document Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- kil: .kil: .kil format for Kontour (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- text: .txt: text in different forms (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -height : integer : page height in terms of characters] [ -width : integer : page width in terms of characters] [ -dump : boolean : dump text pieces] ------------------------------------------- sk: .sk: Sketch Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- mpost: .mp: MetaPost Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- asy: .asy: Asymptote Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- mma: .m: Mathematica Graphics (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -eofillfills : boolean : Filling is used for eofill (default is not to fill)] ------------------------------------------- latex2e: .tex: LaTeX2e picture format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -integers : boolean : round all coordinates to the nearest integer] ------------------------------------------- noixml: .xml: Nemetschek NOI XML format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -r : string : Allplan resource file] [ -bsl : integer : Bezier Split Level (default 3)] ------------------------------------------- pic: .pic: PIC format for troff et.al. (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -troff : boolean : troff mode (default is groff)] [ -landscape : boolean : landscape output] [ -portrait : boolean : portrait output] [ -keepfont : boolean : print unrecognized literally] [ -text : boolean : try not to make pictures from running text] [ -debug : boolean : enable debug output] ------------------------------------------- hpgl: .hpgl: HPGL code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -penplotter : boolean : plotter is pen plotter (i.e. no support for specific line widths)] [ -pencolorsfromfile : boolean : read pen colors from file drvhpgl.pencolors in pstoedit data directory] [ -pencolors : integer : maximum number of pen colors to be used by pstoedit (default 0) - ] [ -filltype : string : select fill type e.g. FT 1] [ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1] [ -rot90 : boolean : rotate hpgl by 90 degrees] [ -rot180 : boolean : rotate hpgl by 180 degrees] [ -rot270 : boolean : rotate hpgl by 270 degrees] ------------------------------------------- pcl: .pcl: PCL code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -penplotter : boolean : plotter is pen plotter (i.e. no support for specific line widths)] [ -pencolorsfromfile : boolean : read pen colors from file drvhpgl.pencolors in pstoedit data directory] [ -pencolors : integer : maximum number of pen colors to be used by pstoedit (default 0) - ] [ -filltype : string : select fill type e.g. FT 1] [ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1] [ -rot90 : boolean : rotate hpgl by 90 degrees] [ -rot180 : boolean : rotate hpgl by 180 degrees] [ -rot270 : boolean : rotate hpgl by 270 degrees] ------------------------------------------- pcbi: .dat: engrave data - insulate/PCB format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- pcb: .pcb: pcb format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -grid : double : attempt to snap relevant output to grid (mils) and put failed objects to a different layer] [ -snapdist : double : grid snap distance ratio (0 < snapdist <= 0.5, default 0.1)] [ -tshiftx : double : additional x shift measured in target units (mils)] [ -tshifty : double : additional y shift measured in target units (mils)] [ -grid : double : attempt to snap relevant output to grid (mils) and put failed objects to a different layer] [ -mm : boolean : Switch to metric units (mm)] [ -stdnames : boolean : use standard layer names instead of descriptive names] [ -forcepoly : boolean : force all objects to be interpreted as polygons] ------------------------------------------- pcbfill: .pcbfill: pcb format with fills (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- gschem: .gschem: gschem format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- cfdg: .cfdg: Context Free Design Grammar (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- tk: .tk: tk and/or tk applet source code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -R : boolean : swap HW] [ -I : boolean : no impress] [ -n : string : tagnames] ------------------------------------------- vtk: .vtk: VTK driver: if you don't want to see this, uncomment the corresponding line in makefile and make again (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -VTKeoption : integer : just an example] ------------------------------------------- svm: .svm: StarView/OpenOffice.org metafile (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -m : boolean : map to Arial] [ -nf : boolean : emulate narrow fonts] ------------------------------------------- gnuplot: .gnuplot: gnuplot format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- tgif: .obj: Tgif .obj format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -ta : boolean : text as attribute] ------------------------------------------- fig: .fig: .fig format for xfig (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -startdepth : integer : Set the initial depth (default 999)] [ -metric : boolean : Switch to centimeter display (default inches)] [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use this if you also use this option with xfig] [ -depth : integer : Set the page depth in inches (default 11)] ------------------------------------------- xfig: .fig: .fig format for xfig (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -startdepth : integer : Set the initial depth (default 999)] [ -metric : boolean : Switch to centimeter display (default inches)] [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use this if you also use this option with xfig] [ -depth : integer : Set the page depth in inches (default 11)] ------------------------------------------- tfig: .fig: .fig format for xfig (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -startdepth : integer : Set the initial depth (default 999)] [ -metric : boolean : Switch to centimeter display (default inches)] [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use this if you also use this option with xfig] [ -depth : integer : Set the page depth in inches (default 11)] ------------------------------------------- idraw: .idraw: Interviews draw format (EPS) (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- sample: .sam: sample driver: if you don't want to see this, uncomment the corresponding line in makefile and make again (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -sampleoption : integer : just an example] ------------------------------------------- =======================================

Now, after sudo port update pstoedit for version 3.70 ======================================= Available formats : psf: .fps: Flattened PostScript (no curves) (built-in) ------------------------------------------- ps: .spsc: Simplified PostScript with curves (built-in) ------------------------------------------- debug: .dbg: for test purposes (built- in) ------------------------------------------- dump: .dbg: for test purposes (same as debug) (built-in) ------------------------------------------- gs: .gs: any device that Ghostscript provides - use gs:format, e.g. gs:pdfwrite (built-in) ------------------------------------------- ps2ai: .ai: Adobe Illustrator via ps2ai.ps of Ghostscript (built-in) ------------------------------------------- ====================

ls /opt/local/lib/pstoedit: libp2edrvlplot.0.so libp2edrvmagick++.0.so libp2edrvstd.0.so libp2edrvlplot.so libp2edrvmagick++.so libp2edrvstd.so

Thanks, Darrell Lamm

New description: Previous version of pstoedit (3.62) provided the following formats: {{{ psf: .fps: Flattened PostScript (no curves) (built-in) ------------------------------------------- ps: .spsc: Simplified PostScript with curves (built-in) ------------------------------------------- debug: .dbg: for test purposes (built-in) ------------------------------------------- dump: .dbg: for test purposes (same as debug) (built-in) ------------------------------------------- gs: .gs: any device that GhostScript provides - use gs:format, e.g. gs:pdfwrite (built-in) ------------------------------------------- ps2ai: .ai: Adobe Illustrator via ps2ai.ps of GhostScript (built-in) ------------------------------------------- gmfa: .meta: ASCII GNU metafile (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- gmfb: .meta: binary GNU metafile (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot: .plot: GNU libplot output types, e.g. plot:-plotformat X (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-cgm: .cgm: cgm via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-ai: .ai: ai via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-svg: .svg: svg via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-ps: .ps: ps via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-fig: .fig: fig via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-pcl: .pcl: pcl via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-hpgl: .hpgl: hpgl via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- plot-tek: .tek: tek via GNU libplot (/opt/local/lib/pstoedit/libp2edrvlplot.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -plotformat : string : plotutil format to generate] ------------------------------------------- magick: ....: MAGICK driver (/opt/local/lib/pstoedit/libp2edrvmagick++.0.so) ------------------------------------------- gcode: .gcode: emc2 gcode format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- cairo: .c: cairo driver (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -pango : boolean : use pango for font rendering] [ -funcname : string : sets the base name for the generated functions and variables. e.g. myfig] [ -header : string : sets the output file name for the generated C header file. e.g. myfig.h] ------------------------------------------- lwo: .lwo: LightWave 3D Object Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- rib: .rib: RenderMan Interface Bytestream (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- rpl: .rpl: Real3D Programming Language Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- dxf: .dxf: CAD exchange format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -polyaslines : boolean : use LINE instead of POLYLINE in DXF] [ -mm : boolean : use mm coordinates instead of points in DXF (mm=pt/72*25.4)] [ -ctl : boolean : map colors to layers] [ -splineaspolyline : boolean : approximate splines with PolyLines (only for -f dxf_s)] [ -splineasnurb : boolean : experimental (only for -f dxf_s)] [ -splineasbspline : boolean : experimental (only for -f dxf_s)] [-splineassinglespline : boolean : experimental (only for -f dxf_s)] [-splineasmultispline : boolean : experimental (only for -f dxf_s)] [ -splineasbezier : boolean : use Bezier splines in DXF format (only for -f dxf_s)] [ -splineprecision : integer : number of samples to take from spline curve when doing approximation with -splineaspolyline or -splineasmultispline - should be >=2 (default 5)] [ -dumplayernames : boolean : dump all layer names found to standard output] [ -layers : string : layers to be shown (comma separated list of layer names, no space)] [ -layerfilter : string : layers to be hidden (comma separated list of layer names, no space)] ------------------------------------------- dxf_s: .dxf: CAD exchange format with splines (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -polyaslines : boolean : use LINE instead of POLYLINE in DXF] [ -mm : boolean : use mm coordinates instead of points in DXF (mm=pt/72*25.4)] [ -ctl : boolean : map colors to layers] [ -splineaspolyline : boolean : approximate splines with PolyLines (only for -f dxf_s)] [ -splineasnurb : boolean : experimental (only for -f dxf_s)] [ -splineasbspline : boolean : experimental (only for -f dxf_s)] [-splineassinglespline : boolean : experimental (only for -f dxf_s)] [-splineasmultispline : boolean : experimental (only for -f dxf_s)] [ -splineasbezier : boolean : use Bezier splines in DXF format (only for -f dxf_s)] [ -splineprecision : integer : number of samples to take from spline curve when doing approximation with -splineaspolyline or -splineasmultispline - should be >=2 (default 5)] [ -dumplayernames : boolean : dump all layer names found to standard output] [ -layers : string : layers to be shown (comma separated list of layer names, no space)] [ -layerfilter : string : layers to be hidden (comma separated list of layer names, no space)] ------------------------------------------- java1: .java: java 1 applet source code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ java class name : string : name of java class to generate] ------------------------------------------- java2: .java2: java 2 source code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ java class name : string : name of java class to generate] ------------------------------------------- pdf: .pdf: Adobe's Portable Document Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- kil: .kil: .kil format for Kontour (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- text: .txt: text in different forms (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -height : integer : page height in terms of characters] [ -width : integer : page width in terms of characters] [ -dump : boolean : dump text pieces] ------------------------------------------- sk: .sk: Sketch Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- mpost: .mp: MetaPost Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- asy: .asy: Asymptote Format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- mma: .m: Mathematica Graphics (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -eofillfills : boolean : Filling is used for eofill (default is not to fill)] ------------------------------------------- latex2e: .tex: LaTeX2e picture format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -integers : boolean : round all coordinates to the nearest integer] ------------------------------------------- noixml: .xml: Nemetschek NOI XML format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -r : string : Allplan resource file] [ -bsl : integer : Bezier Split Level (default 3)] ------------------------------------------- pic: .pic: PIC format for troff et.al. (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -troff : boolean : troff mode (default is groff)] [ -landscape : boolean : landscape output] [ -portrait : boolean : portrait output] [ -keepfont : boolean : print unrecognized literally] [ -text : boolean : try not to make pictures from running text] [ -debug : boolean : enable debug output] ------------------------------------------- hpgl: .hpgl: HPGL code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -penplotter : boolean : plotter is pen plotter (i.e. no support for specific line widths)] [ -pencolorsfromfile : boolean : read pen colors from file drvhpgl.pencolors in pstoedit data directory] [ -pencolors : integer : maximum number of pen colors to be used by pstoedit (default 0) - ] [ -filltype : string : select fill type e.g. FT 1] [ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1] [ -rot90 : boolean : rotate hpgl by 90 degrees] [ -rot180 : boolean : rotate hpgl by 180 degrees] [ -rot270 : boolean : rotate hpgl by 270 degrees] ------------------------------------------- pcl: .pcl: PCL code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -penplotter : boolean : plotter is pen plotter (i.e. no support for specific line widths)] [ -pencolorsfromfile : boolean : read pen colors from file drvhpgl.pencolors in pstoedit data directory] [ -pencolors : integer : maximum number of pen colors to be used by pstoedit (default 0) - ] [ -filltype : string : select fill type e.g. FT 1] [ -hpgl2 : boolean : Use HPGL/2 instead of HPGL/1] [ -rot90 : boolean : rotate hpgl by 90 degrees] [ -rot180 : boolean : rotate hpgl by 180 degrees] [ -rot270 : boolean : rotate hpgl by 270 degrees] ------------------------------------------- pcbi: .dat: engrave data - insulate/PCB format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- pcb: .pcb: pcb format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -grid : double : attempt to snap relevant output to grid (mils) and put failed objects to a different layer] [ -snapdist : double : grid snap distance ratio (0 < snapdist <= 0.5, default 0.1)] [ -tshiftx : double : additional x shift measured in target units (mils)] [ -tshifty : double : additional y shift measured in target units (mils)] [ -grid : double : attempt to snap relevant output to grid (mils) and put failed objects to a different layer] [ -mm : boolean : Switch to metric units (mm)] [ -stdnames : boolean : use standard layer names instead of descriptive names] [ -forcepoly : boolean : force all objects to be interpreted as polygons] ------------------------------------------- pcbfill: .pcbfill: pcb format with fills (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- gschem: .gschem: gschem format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- cfdg: .cfdg: Context Free Design Grammar (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- tk: .tk: tk and/or tk applet source code (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -R : boolean : swap HW] [ -I : boolean : no impress] [ -n : string : tagnames] ------------------------------------------- vtk: .vtk: VTK driver: if you don't want to see this, uncomment the corresponding line in makefile and make again (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -VTKeoption : integer : just an example] ------------------------------------------- svm: .svm: StarView/OpenOffice.org metafile (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -m : boolean : map to Arial] [ -nf : boolean : emulate narrow fonts] ------------------------------------------- gnuplot: .gnuplot: gnuplot format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- tgif: .obj: Tgif .obj format (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -ta : boolean : text as attribute] ------------------------------------------- fig: .fig: .fig format for xfig (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -startdepth : integer : Set the initial depth (default 999)] [ -metric : boolean : Switch to centimeter display (default inches)] [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use this if you also use this option with xfig] [ -depth : integer : Set the page depth in inches (default 11)] ------------------------------------------- xfig: .fig: .fig format for xfig (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -startdepth : integer : Set the initial depth (default 999)] [ -metric : boolean : Switch to centimeter display (default inches)] [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use this if you also use this option with xfig] [ -depth : integer : Set the page depth in inches (default 11)] ------------------------------------------- tfig: .fig: .fig format for xfig (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -startdepth : integer : Set the initial depth (default 999)] [ -metric : boolean : Switch to centimeter display (default inches)] [ -usecorrectfontsize : boolean : don't scale fonts for xfig. Use this if you also use this option with xfig] [ -depth : integer : Set the page depth in inches (default 11)] ------------------------------------------- idraw: .idraw: Interviews draw format (EPS) (/opt/local/lib/pstoedit/libp2edrvstd.0.so) ------------------------------------------- sample: .sam: sample driver: if you don't want to see this, uncomment the corresponding line in makefile and make again (/opt/local/lib/pstoedit/libp2edrvstd.0.so) This driver supports the following additional options: (specify using -f "format:-option1 -option2") [ -sampleoption : integer : just an example] ------------------------------------------- }}} Now, after sudo port update pstoedit for version 3.70 {{{ Available formats : psf: .fps: Flattened PostScript (no curves) (built-in) ------------------------------------------- ps: .spsc: Simplified PostScript with curves (built-in) ------------------------------------------- debug: .dbg: for test purposes (built-in) ------------------------------------------- dump: .dbg: for test purposes (same as debug) (built-in) ------------------------------------------- gs: .gs: any device that Ghostscript provides - use gs:format, e.g. gs:pdfwrite (built-in) ------------------------------------------- ps2ai: .ai: Adobe Illustrator via ps2ai.ps of Ghostscript (built-in) ------------------------------------------- }}} {{{ls /opt/local/lib/pstoedit}}}: {{{ libp2edrvlplot.0.so libp2edrvmagick++.0.so libp2edrvstd.0.so libp2edrvlplot.so libp2edrvmagick++.so libp2edrvstd.so }}} Thanks,\\ Darrell Lamm -- -- Ticket URL: <https://trac.macports.org/ticket/47354#comment:1> MacPorts <https://www.macports.org/> Ports system for OS X

#47354: pstoedit 3.70 does not have most of the available drivers that 3.62 did -----------------------------+-------------------------------- Reporter: darrell.lamm@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: pstoedit | -----------------------------+-------------------------------- Comment (by J.Gilbey@…): I have tested this patch and can confirm that it fixes it for me in the same way as described. I have also tested the plot-svg option, and it works correctly. -- Ticket URL: <https://trac.macports.org/ticket/47354#comment:5> MacPorts <https://www.macports.org/> Ports system for OS X