[MacPorts] #36459: doxygen @1.8.1: graphiz dependency problem?
#36459: doxygen @1.8.1: graphiz dependency problem? ------------------------------+-------------------------------- Reporter: philippe.lang@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Low | Milestone: Component: ports | Version: 2.1.2 Keywords: doxygen graphviz | Port: doxygen ------------------------------+-------------------------------- Hi, I'm not sure this is the right place to mention this. While trying to install the "doxygen" port, it systematically failed while trying to install the "graphviz" port, like this: [~]$ sudo port install doxygen Password: ---> Computing dependencies for doxygen ---> Dependencies to be installed: graphviz ---> Building graphviz Error: org.macports.build for port graphviz returned: command execution failed Error: Failed to install graphviz Please see the log file for port graphviz for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_graphviz/graphviz/main.log Error: The following dependencies were not installed: graphviz To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port doxygen failed I decided to install "graphviz" directly, and then it worked: [~]$ sudo port install graphviz ---> Computing dependencies for pkgconfig ---> Fetching archive for pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://packages.macports.org/pkgconfig ---> Fetching distfiles for pkgconfig ---> Attempting to fetch pkg-config-0.27.1.tar.gz from http://fco.it.distfiles.macports.org/mirrors/macports-distfiles/pkgconfig ---> Verifying checksum(s) for pkgconfig ---> Extracting pkgconfig ---> Applying patches to pkgconfig I could then install doxygen without a problem. This looks like a dependency problem in the doxygen port, or maybe graphviz. Philippe -- Ticket URL: <https://trac.macports.org/ticket/36459> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36459: doxygen @1.8.1: graphiz dependency problem? ------------------------------+-------------------------------- Reporter: philippe.lang@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Low | Milestone: Component: ports | Version: 2.1.2 Resolution: invalid | Keywords: Port: doxygen | ------------------------------+-------------------------------- Changes (by ryandesign@…): * status: new => closed * cc: ryandesign@… (added) * resolution: => invalid * keywords: doxygen graphviz => Old description:
Hi,
I'm not sure this is the right place to mention this. While trying to install the "doxygen" port, it systematically failed while trying to install the "graphviz" port, like this:
[~]$ sudo port install doxygen Password: ---> Computing dependencies for doxygen ---> Dependencies to be installed: graphviz ---> Building graphviz Error: org.macports.build for port graphviz returned: command execution failed Error: Failed to install graphviz Please see the log file for port graphviz for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_graphviz/graphviz/main.log Error: The following dependencies were not installed: graphviz To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port doxygen failed
I decided to install "graphviz" directly, and then it worked:
[~]$ sudo port install graphviz ---> Computing dependencies for pkgconfig ---> Fetching archive for pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://packages.macports.org/pkgconfig ---> Fetching distfiles for pkgconfig ---> Attempting to fetch pkg-config-0.27.1.tar.gz from http://fco.it.distfiles.macports.org/mirrors/macports-distfiles/pkgconfig ---> Verifying checksum(s) for pkgconfig ---> Extracting pkgconfig ---> Applying patches to pkgconfig
I could then install doxygen without a problem.
This looks like a dependency problem in the doxygen port, or maybe graphviz.
Philippe
New description: Hi, I'm not sure this is the right place to mention this. While trying to install the "doxygen" port, it systematically failed while trying to install the "graphviz" port, like this: {{{ [~]$ sudo port install doxygen Password: ---> Computing dependencies for doxygen ---> Dependencies to be installed: graphviz ---> Building graphviz Error: org.macports.build for port graphviz returned: command execution failed Error: Failed to install graphviz Please see the log file for port graphviz for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_graphviz/graphviz/main.log Error: The following dependencies were not installed: graphviz To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port doxygen failed }}} I decided to install "graphviz" directly, and then it worked: {{{ [~]$ sudo port install graphviz ---> Computing dependencies for pkgconfig ---> Fetching archive for pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://lil.fr.packages.macports.org/pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/pkgconfig ---> Attempting to fetch pkgconfig-0.27.1_1.darwin_12.x86_64.tbz2 from http://packages.macports.org/pkgconfig ---> Fetching distfiles for pkgconfig ---> Attempting to fetch pkg-config-0.27.1.tar.gz from http://fco.it.distfiles.macports.org/mirrors/macports-distfiles/pkgconfig ---> Verifying checksum(s) for pkgconfig ---> Extracting pkgconfig ---> Applying patches to pkgconfig }}} I could then install doxygen without a problem. This looks like a dependency problem in the doxygen port, or maybe graphviz. Philippe -- Comment: Replying to [ticket:36459 philippe.lang@…]:
{{{ ---> Computing dependencies for doxygen ---> Dependencies to be installed: graphviz ---> Building graphviz Error: org.macports.build for port graphviz returned: command execution failed }}}
The fact that it went straight to building graphviz, skipping the earlier phases fetch, extract, patch and configure, shows that this was not a clean attempt. If you were still experiencing the problem, we would ask you to "sudo port clean graphviz" and try again. If that then worked, then I would say you had experienced #29223, which will be fixed in a future version of MacPorts.
{{{ Error: Failed to install graphviz Please see the log file for port graphviz for details:
/opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_graphviz/graphviz/main.log
}}}
We would need to have seen the contents of this log file to know what went wrong. But since you've already tried again, the original log will have been overwritten. And if you've been able to successfully install graphviz, then the new log will have been deleted already (unless you had previously set "keeplogs yes" in macports.conf; the default is not to keep logs of successful builds).
I decided to install "graphviz" directly, and then it worked:
Great, then there's nothing to do here. -- Ticket URL: <https://trac.macports.org/ticket/36459#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36459: doxygen @1.8.1: graphiz dependency problem? ------------------------------+-------------------------------- Reporter: philippe.lang@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Low | Milestone: Component: ports | Version: 2.1.2 Resolution: invalid | Keywords: Port: doxygen | ------------------------------+-------------------------------- Comment (by stefan.vaillant@…): I run into the same problem, and had to use the same "fix", i.e. install graphviz directly. Extract from failing install doxygen: {{{ ---> Cleaning xorg-libXaw ---> Fetching archive for graphviz ---> Attempting to fetch graphviz-2.30.0_0.darwin_11.x86_64.tbz2 from http://mse.uk.packages.macports.org/sites/packages.macports.org/graphviz ---> Attempting to fetch graphviz-2.30.0_0.darwin_11.x86_64.tbz2 from http://lil.fr.packages.macports.org/graphviz ---> Attempting to fetch graphviz-2.30.0_0.darwin_11.x86_64.tbz2 from http://packages.macports.org/graphviz ---> Fetching distfiles for graphviz ---> Attempting to fetch graphviz-2.30.0.tar.gz from http://lil.fr.distfiles.macports.org/graphviz ---> Verifying checksum(s) for graphviz ---> Extracting graphviz ---> Configuring graphviz ---> Building graphviz Error: org.macports.build for port graphviz returned: command execution failed Error: Failed to install graphviz Please see the log file for port graphviz for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/main.log Error: The following dependencies were not installed: graphviz To report a bug, follow the instructions in the guide: http://guide.macports.org/#project.tickets Error: Processing of port doxygen failed }}} /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_graphviz/graphviz/main.log says: {{{ :info:build mv -f .deps/gvrender_gd_vrml.Tpo .deps/gvrender_gd_vrml.Plo :info:build /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/clang -pipe -O2 -arch x86_64 -fno-common -Wall -L/opt/local/lib -arch x86_64 -L/opt/local/lib -o libgvplugin_gd_C.la gvplugin_gd.lo gvrender_gd.lo gvrender_gd_vrml.lo gvtextlayout_gd.lo gvloadimage_gd.lo gvdevice_gd.lo :info:build /bin/sh ../../libtool --tag=CC --mode=link /usr/bin/clang -pipe -O2 -arch x86_64 -fno-common -Wall -version-info 6:0:0 -L/opt/local/lib -arch x86_64 -L/opt/local/lib -o libgvplugin_gd.la -rpath /opt/local/lib/graphviz gvplugin_gd.lo gvrender_gd.lo gvrender_gd_vrml.lo gvtextlayout_gd.lo gvloadimage_gd.lo gvdevice_gd.lo ../../lib/gvc/libgvc.la ../../lib/cgraph/libcgraph.la ../../lib/cdt/libcdt.la -L/opt/local/lib -lpangocairo-1.0 -lcairo -lpangoft2-1.0 -lpango-1.0 -lm -lfreetype -lfontconfig -lgobject-2.0 -lgmodule-2.0 -lgthread-2.0 -lglib-2.0 -lintl -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -L/opt/local/lib -lgd -lXpm -lX11 -ljpeg -lfontconfig -lfreetype -lpng -lz -liconv -lm :info:build libtool: link: ar cru .libs/libgvplugin_gd_C.a .libs/gvplugin_gd.o .libs/gvrender_gd.o .libs/gvrender_gd_vrml.o .libs/gvtextlayout_gd.o .libs/gvloadimage_gd.o .libs/gvdevice_gd.o :info:build libtool: link: ranlib .libs/libgvplugin_gd_C.a :info:build libtool: link: ( cd ".libs" && rm -f "libgvplugin_gd_C.la" && ln -s "../libgvplugin_gd_C.la" "libgvplugin_gd_C.la" ) :info:build grep: /opt/local/lib/libpng14.la: No such file or directory :info:build sed: /opt/local/lib/libpng14.la: No such file or directory :info:build libtool: link: `/opt/local/lib/libpng14.la' is not a valid libtool archive }}} -- Ticket URL: <https://trac.macports.org/ticket/36459#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36459: doxygen @1.8.1: graphviz dependency problem? ------------------------------+-------------------------------- Reporter: philippe.lang@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Low | Milestone: Component: ports | Version: 2.1.2 Resolution: invalid | Keywords: Port: doxygen | ------------------------------+-------------------------------- Changes (by ryandesign@…): * cc: stefan.vaillant@… (added) Comment: If you're experiencing a graphviz build error due to one of its dependencies still linking with libpng14, it doesn't make sense that you should be able to resolve it by just repeating the graphviz build. You should have to rebuild the thing that's still linking with libpng14 (so that it now links with libpng15), then clean graphviz and try its build again. If you want to help us resolve this once and for all, we need to know what it was on you system that was still linking with libpng14 so that we can increase its revision to rebuild it. Actually rev-upgrade should have caught and fixed this error on your system by now. Or have you turned rev-upgrade off? -- Ticket URL: <https://trac.macports.org/ticket/36459#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts