[MacPorts] #48312: openssl 1.0.2d stuck on configuring process
#48312: openssl 1.0.2d stuck on configuring process -------------------------------+-------------------------------- Reporter: rubendibattista@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Keywords: | Port: openssl -------------------------------+-------------------------------- While doing {{{ port update outdated }}} the building process stuck on the Configuring phase. Here is the output of the verbose command: {{{ Configuring for darwin64-x86_64-cc no-ec_nistp_64_gcc_128 [default] OPENSSL_NO_EC_NISTP_64_GCC_128 (skip dir) no-gmp [default] OPENSSL_NO_GMP (skip dir) no-jpake [experimental] OPENSSL_NO_JPAKE (skip dir) no-krb5 [krb5-flavor not specified] OPENSSL_NO_KRB5 no-libunbound [experimental] OPENSSL_NO_LIBUNBOUND (skip dir) no-md2 [default] OPENSSL_NO_MD2 (skip dir) no-rc5 [default] OPENSSL_NO_RC5 (skip dir) no-rfc3779 [default] OPENSSL_NO_RFC3779 (skip dir) no-sctp [default] OPENSSL_NO_SCTP (skip dir) no-ssl-trace [default] OPENSSL_NO_SSL_TRACE (skip dir) no-store [experimental] OPENSSL_NO_STORE (skip dir) no-unit-test [default] OPENSSL_NO_UNIT_TEST (skip dir) no-zlib-dynamic [default] IsMK1MF=0 CC =/usr/bin/clang CFLAG =-fPIC -fno-common -DOPENSSL_PIC -DZLIB -DOPENSSL_THREADS -D_REENTRANT -DDSO_DLFCN -DHAVE_DLFCN_H -arch x86_64 -O3 -DL_ENDIAN -Wall -DOPENSSL_IA32_SSE2 -DOPENSSL_BN_ASM_MONT -DOPENSSL_BN_ASM_MONT5 -DOPENSSL_BN_ASM_GF2m -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM -DMD5_ASM -DAES_ASM -DVPAES_ASM -DBSAES_ASM -DWHIRLPOOL_ASM -DGHASH_ASM -DECP_NISTZ256_ASM EX_LIBS =-L/opt/local/lib -lz CPUID_OBJ =x86_64cpuid.o BN_ASM =x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o EC_ASM =ecp_nistz256.o ecp_nistz256-x86_64.o DES_ENC =des_enc.o fcrypt_b.o AES_ENC =aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o BF_ENC =bf_enc.o CAST_ENC =c_enc.o RC4_ENC =rc4_enc.o rc4_skey.o RC5_ENC =rc5_enc.o MD5_OBJ_ASM =md5-x86_64.o SHA1_OBJ_ASM =sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb- x86_64.o sha256-mb-x86_64.o RMD160_OBJ_ASM= CMLL_ENC =cmll-x86_64.o cmll_misc.o MODES_OBJ =ghash-x86_64.o aesni-gcm-x86_64.o ENGINES_OBJ = PROCESSOR = RANLIB =/opt/local/bin/ranlib ARFLAGS = PERL =/usr/bin/perl SIXTY_FOUR_BIT_LONG mode DES_UNROLL used DES_INT used RC4_CHUNK is unsigned long }}} ProductName: Mac OS X ProductVersion: 10.10.4 BuildVersion: 14E46 -- Ticket URL: <https://trac.macports.org/ticket/48312> MacPorts <https://www.macports.org/> Ports system for OS X
#48312: openssl 1.0.2d stuck on configuring process --------------------------------+---------------------- Reporter: rubendibattista@… | Owner: larryv@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: openssl | --------------------------------+---------------------- Changes (by cal@…): * cc: cal@… (added) * owner: macports-tickets@… => larryv@… Comment: Please Cc the maintainers when reporting bugs against ports. Please attach the main.log. Did you clean and try again? Have you tried in trace mode (i.e. `port -t`)? -- Ticket URL: <https://trac.macports.org/ticket/48312#comment:1> MacPorts <https://www.macports.org/> Ports system for OS X
#48312: openssl 1.0.2d stuck on configuring process --------------------------------+---------------------- Reporter: rubendibattista@… | Owner: larryv@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: openssl | --------------------------------+---------------------- Comment (by rubendibattista@…): The maintainers listed were with {{{@macports.org}}} domain and in the rules is reported that, if this is the case, the field must be left blank. In any case the {{{main.log}}} is not present because the installation was interrupt by me {{{Ctrl+C}}}. I cleaned and tried again, even with the {{{-tv}}} options but the configuration process get stuck at {{{RC4_CHUNK is unsigned long}}} and doesn't go on. -- Ticket URL: <https://trac.macports.org/ticket/48312#comment:2> MacPorts <https://www.macports.org/> Ports system for OS X
#48312: openssl 1.0.2d stuck on configuring process --------------------------------+---------------------- Reporter: rubendibattista@… | Owner: larryv@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: openssl | --------------------------------+---------------------- Comment (by cal@…): The `main.log` still exists; run `port logfile openssl` to get its path. -- Ticket URL: <https://trac.macports.org/ticket/48312#comment:3> MacPorts <https://www.macports.org/> Ports system for OS X
#48312: openssl 1.0.2d stuck on configuring process --------------------------------+---------------------- Reporter: rubendibattista@… | Owner: larryv@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: openssl | --------------------------------+---------------------- Comment (by rubendibattista@…): I attached it. Sorry about that. :S -- Ticket URL: <https://trac.macports.org/ticket/48312#comment:4> MacPorts <https://www.macports.org/> Ports system for OS X
#48312: openssl 1.0.2d stuck on configuring process --------------------------------+---------------------- Reporter: rubendibattista@… | Owner: larryv@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: openssl | --------------------------------+---------------------- Comment (by cal@…): OK, so the step that fails for you is `make links depend gentests`; apparently your make process is just hanging there. Does `/Library/Developer/CommandLineTools/usr/bin/make` exist on your system? Also, we've previously seen random hangs in Xcode's build tools that could be solved by a reboot (an awfully Windows-y workaround, but it worked in all cases so far). When did you last restart your system? -- Ticket URL: <https://trac.macports.org/ticket/48312#comment:5> MacPorts <https://www.macports.org/> Ports system for OS X
#48312: openssl 1.0.2d stuck on configuring process --------------------------------+---------------------- Reporter: rubendibattista@… | Owner: larryv@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: | Keywords: Port: openssl | --------------------------------+---------------------- Comment (by rubendibattista@…): That was the case. A reboot solved the problem (but... what? o.O). Thanks for your help! -- Ticket URL: <https://trac.macports.org/ticket/48312#comment:6> MacPorts <https://www.macports.org/> Ports system for OS X
#48312: openssl 1.0.2d stuck on configuring process --------------------------------+---------------------- Reporter: rubendibattista@… | Owner: larryv@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 2.3.3 Resolution: worksforme | Keywords: Port: openssl | --------------------------------+---------------------- Changes (by cal@…): * status: new => closed * resolution: => worksforme Comment: Yeah, there's somehow MacPorts' environment triggers a problem deep down in OS X internals (probably Mach ports or something similar) that causes these hangs -- at least that's my guess, since nobody had the required time and knowledge to debug this, yet. -- Ticket URL: <https://trac.macports.org/ticket/48312#comment:7> MacPorts <https://www.macports.org/> Ports system for OS X
participants (1)
-
MacPorts