#32684: tripwire: error: use of undeclared identifier 'Equal' ---------------------------------+------------------------------------------ Reporter: eriknorthrop@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: clang | Port: tripwire ---------------------------------+------------------------------------------ Changes (by ryandesign@…): * keywords: => clang * port: => tripwire Old description:

Version 2.4.1.2

Log File....

version:1 :debug:main epoch: in tree: 1 installed: 1 :debug:main autoconf 2.68_2 exists in the ports tree :debug:main autoconf 2.68_2 is the latest installed :debug:main autoconf 2.68_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/autoconf :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! autoconf 2.68_2 >= autoconf 2.68_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.12.3_1 exists in the ports tree :debug:main perl5 5.12.3_1 +perl5_12 is the latest installed :debug:main perl5 5.12.3_1 +perl5_12 is active :debug:main Merging existing variants '+perl5_12' into variants :debug:main new fully merged portvariants: perl5_12 + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main Executing variant perl5_12 provides perl5_12 :debug:main No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.12 5.12.3_3 exists in the ports tree :debug:main perl5.12 5.12.3_3 is the latest installed :debug:main perl5.12 5.12.3_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.12 5.12.3_3 >= perl5.12 5.12.3_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.10_1 exists in the ports tree :debug:main gdbm 1.10_1 is the latest installed :debug:main gdbm 1.10_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 is the latest installed :debug:main expat 2.0.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main m4 1.4.16_0 exists in the ports tree :debug:main m4 1.4.16_0 is the latest installed :debug:main m4 1.4.16_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/m4 :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! m4 1.4.16_0 >= m4 1.4.16_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main help2man 1.40.4_1 exists in the ports tree :debug:main help2man 1.40.4_1 is the latest installed :debug:main help2man 1.40.4_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/help2man :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! help2man 1.40.4_1 >= help2man 1.40.4_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5.12-locale-gettext 1.50.0_6 exists in the ports tree :debug:main p5.12-locale-gettext 1.50.0_6 is the latest installed :debug:main p5.12-locale-gettext 1.50.0_6 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/perl/p5 -locale-gettext :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for livecheck.version :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! p5.12-locale-gettext 1.50.0_6 >= p5.12 -locale-gettext 1.50.0_6 :debug:main epoch: in tree: 0 installed: 0 :debug:main automake 1.11.1_0 exists in the ports tree :debug:main automake 1.11.1_0 is the latest installed :debug:main automake 1.11.1_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/automake :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libtool 2.4.2_0 exists in the ports tree :debug:main libtool 2.4.2_0 is the latest installed :debug:main libtool 2.4.2_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libtool 2.4.2_0 >= libtool 2.4.2_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.0e_1 exists in the ports tree :debug:main openssl 1.0.0e_1 is the latest installed :debug:main openssl 1.0.0e_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.0e_1 >= openssl 1.0.0e_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.5_0 exists in the ports tree :debug:main zlib 1.2.5_0 is the latest installed :debug:main zlib 1.2.5_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/11.2.0 (Mac OS X 10.7) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :msg:main ---> Computing dependencies for tripwire:info:main .:debug:main Searching for dependency: autoconf :debug:main Found Dependency: receipt exists for autoconf :debug:main Searching for dependency: automake :debug:main Found Dependency: receipt exists for automake :debug:main Searching for dependency: libtool :debug:main Found Dependency: receipt exists for libtool :debug:main Searching for dependency: openssl :debug:main Found Dependency: receipt exists for openssl :msg:main :debug:main Executing org.macports.main (tripwire) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 503 :debug:main Skipping completed org.macports.archivefetch (tripwire) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (tripwire) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (tripwire) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (tripwire) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (tripwire) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (tripwire) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Tue Dec 27 19:05:21 EST 2011 :notice:build ---> Building tripwire :debug:build Executing org.macports.build (tripwire) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.7' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src" && /usr/bin/make -j8 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src" && /usr/bin/make -j8 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src' :info:build /usr/bin/make all-recursive :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src' :info:build Making all in man :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man' :info:build Making all in man4 :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4' :info:build make[3]: Nothing to be done for `all'. :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man4' :info:build Making all in man5 :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5' :info:build make[3]: Nothing to be done for `all'. :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man5' :info:build Making all in man8 :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8' :info:build make[3]: Nothing to be done for `all'. :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man/man8' :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man' :info:build make[3]: Nothing to be done for `all-am'. :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man' :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/man' :info:build Making all in src :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src' :info:build Making all in cryptlib :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib' :info:build /Developer/usr/bin/clang++ -DHAVE_CONFIG_H -I.. -I../.. -I/opt/local/include -I/opt/local/include -pipe -O2 -arch x86_64 -c -o integer.o integer.cpp :info:build In file included from integer.cpp:5: :info:build In file included from ./modarith.h:9: :info:build ./algebra.h:276:10: error: use of undeclared identifier 'Equal' :info:build while (!Equal(g[i1], this->Zero())) :info:build ^ :info:build this-> :info:build integer.cpp:2082:38: note: in instantiation of member function 'AbstractEuclideanDomain<Integer>::Gcd' requested here :info:build return EuclideanDomainOf<Integer>().Gcd(a, b); :info:build ^ :info:build ./algebra.h:13:15: note: must qualify identifier to find this declaration in dependent base class :info:build virtual bool Equal(const Element &a, const Element &b) const =0; :info:build ^ :info:build 1 error generated. :info:build make[3]: *** [integer.o] Error 1 :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src/cryptlib' :info:build make[2]: *** [all-recursive] Error 1 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src/src' :info:build make[1]: *** [all-recursive] Error 1 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src' :info:build make: *** [all] Error 2 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src' :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/work/tripwire-2.4.1.2-src" && /usr/bin/make -j8 -w all " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for tripwire): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for tripwire is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_security_tripwire/tripwire/main.log

New description: Version 2.4.1.2 Log File.... -- Comment: I see you're using clang. Can you try if [wiki:ProblemHotlist#compiler using a different compiler] helps? There's also several newer versions available; perhaps updating the port would help. -- Ticket URL: <https://trac.macports.org/ticket/32684#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS

#32684: tripwire: error: use of undeclared identifier 'Equal' ---------------------------------+------------------------------------------ Reporter: eriknorthrop@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: Keywords: clang | Port: tripwire ---------------------------------+------------------------------------------ Comment(by darrell.usenet6@…): Replying to [comment:2 darrell.usenet6@…]:

Log file of my failed installation attached. Lion 10.7.2

Followed hot linked "using a different compiler" above. Install worked. Many thanks {{{ sudo port install tripwire configure.compiler=llvm-gcc-4.2 ---> Computing dependencies for tripwire ---> Fetching archive for tripwire ---> Attempting to fetch tripwire-2.4.1.2_2.darwin_11.x86_64.tgz from http://packages.macports.org/tripwire ---> Fetching tripwire ---> Verifying checksum(s) for tripwire ---> Extracting tripwire ---> Applying patches to tripwire ---> Configuring tripwire ---> Building tripwire ---> Staging tripwire into destroot ---> Installing tripwire @2.4.1.2_2 ---> Activating tripwire @2.4.1.2_2 }}} -- Ticket URL: <https://trac.macports.org/ticket/32684#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS

#32684: tripwire: error: use of undeclared identifier 'Equal' -----------------------------+-------------------------------- Reporter: eriknorthrop@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: Resolution: fixed | Keywords: clang Port: tripwire | -----------------------------+-------------------------------- Comment (by jmr@…): Not using clang is not a fix. r103798 is a fix. -- Ticket URL: <https://trac.macports.org/ticket/32684#comment:6> MacPorts <http://www.macports.org/> Ports system for OS X