[MacPorts] #24344: libxml2 version 2.7.7 install fails on checksum
#24344: libxml2 version 2.7.7 install fails on checksum -----------------------------------+---------------------------------------- Reporter: lsimmonett@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: MacPorts 1.8.3 Component: ports | Version: 1.8.2 Keywords: | Port: libxml2 -----------------------------------+---------------------------------------- Libxml2 version 2.7.7 fails to install when updating or installing fresh. I have had exactly the same behaviour on version 10.6.2 and 10.6.3. The error I get is as follows: {{{ ---> Computing dependencies for libxml2 ---> Verifying checksum(s) for libxml2 Error: Checksum (md5) mismatch for libxml2-2.7.7.tar.gz Error: Checksum (sha1) mismatch for libxml2-2.7.7.tar.gz Error: Checksum (rmd160) mismatch for libxml2-2.7.7.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums Error: Unable to upgrade port: 1 Before reporting a bug, first run the command again with the -d flag to get complete output. }}} Adding the debug -d option I get the following output: {{{ DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libxml2 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libxml2. DEBUG: Requested variant i386 is not provided by port libxml2. DEBUG: Requested variant macosx is not provided by port libxml2. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.4_1 exists in the ports tree DEBUG: zlib 1.2.4_1 is the latest installed DEBUG: zlib 1.2.4_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.3.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.4_1 >= zlib 1.2.4_1 ---> Computing dependencies for libxml2 DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Executing org.macports.main (libxml2) DEBUG: Skipping completed org.macports.fetch (libxml2) ---> Verifying checksum(s) for libxml2 DEBUG: Executing org.macports.checksum (libxml2) ---> Checksumming libxml2-2.7.7.tar.gz Error: Checksum (md5) mismatch for libxml2-2.7.7.tar.gz Portfile checksum: libxml2-2.7.7.tar.gz md5 9abc9959823ca9ff904f1fbcf21df066 Distfile checksum: libxml2-2.7.7.tar.gz md5 fe92b9c732b7bdfbb3492b2c3f2a7f51 Error: Checksum (sha1) mismatch for libxml2-2.7.7.tar.gz Portfile checksum: libxml2-2.7.7.tar.gz sha1 8592824a2788574a172cbddcdc72f734ff87abe3 Distfile checksum: libxml2-2.7.7.tar.gz sha1 f80190a92a7f189bca128ddb9202add371fde341 Error: Checksum (rmd160) mismatch for libxml2-2.7.7.tar.gz Portfile checksum: libxml2-2.7.7.tar.gz rmd160 9f72c778c3e9e348a68eada0cf624c012658c085 Distfile checksum: libxml2-2.7.7.tar.gz rmd160 5e7406483d21ec6269a2e22d993c9b31a9760c84 The correct checksum line may be: checksums md5 fe92b9c732b7bdfbb3492b2c3f2a7f51 \ sha1 f80190a92a7f189bca128ddb9202add371fde341 \ rmd160 5e7406483d21ec6269a2e22d993c9b31a9760c84 Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for libxml2): org.macports.activate org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} Hope that's enough information. -- Ticket URL: <http://trac.macports.org/ticket/24344> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24344: libxml2 version 2.7.7 install fails on checksum -----------------------------------+---------------------------------------- Reporter: lsimmonett@… | Owner: macsforever2000@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: libxml2 -----------------------------------+---------------------------------------- Changes (by macsforever2000@…): * owner: macports-tickets@… => macsforever2000@… * cc: lsimmonett@… (removed) * cc: cedric.luthi@… (added) * milestone: MacPorts 1.8.3 => Comment: Please read the [wiki:FAQ#checksums FAQ on checksum errors]. You did not specify the downloaded mirror. -- Ticket URL: <http://trac.macports.org/ticket/24344#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24344: libxml2 version 2.7.7 install fails on checksum -----------------------------------+---------------------------------------- Reporter: lsimmonett@… | Owner: cedric.luthi@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: libxml2 -----------------------------------+---------------------------------------- Changes (by macsforever2000@…): * owner: macsforever2000@… => cedric.luthi@… * cc: cedric.luthi@… (removed) -- Ticket URL: <http://trac.macports.org/ticket/24344#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24344: libxml2 version 2.7.7 install fails on checksum -----------------------------------+---------------------------------------- Reporter: lsimmonett@… | Owner: cedric.luthi@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: libxml2 -----------------------------------+---------------------------------------- Comment(by lsimmonett@…): Apologies for not adding the download mirror. The mirror I have in my sources.conf is rsync://rsync.macports.org/release/ports/ This hasn't been changed since macports was installed so I assume it's the default. It is also the only mirror in that file. I'm new to macports so I hope this is what you need. I should also add that I've tried port selfupdate and port sync, with port clean after each failed attempt. I still get the same error. Hope this helps. -- Ticket URL: <http://trac.macports.org/ticket/24344#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24344: libxml2 version 2.7.7 install fails on checksum -----------------------------------+---------------------------------------- Reporter: lsimmonett@… | Owner: cedric.luthi@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: libxml2 -----------------------------------+---------------------------------------- Comment(by macsforever2000@…): What you are referring to is only for the Portfiles and Portindex. The download mirror is for the actual port source code which varies depending on the port. After you run a {{{clean --all}}} on the port, it will show up in the fetch phase when you try to install again. -- Ticket URL: <http://trac.macports.org/ticket/24344#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24344: libxml2 version 2.7.7 install fails on checksum -----------------------------------+---------------------------------------- Reporter: lsimmonett@… | Owner: cedric.luthi@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: libxml2 -----------------------------------+---------------------------------------- Comment(by lsimmonett@…): The port file is fetched from http://lil.fr.distfiles.macports.org/libxml2 after a port clean --all. It would appear that someone has fixed the checksum issue in the last few hours as I now no longer get the error and libxml2 built and installed without issue now. It might still be worth looking into but I believe someone else has also been looking into this issue and has fixed it. -- Ticket URL: <http://trac.macports.org/ticket/24344#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#24344: libxml2 version 2.7.7 install fails on checksum ------------------------------------+--------------------------------------- Reporter: lsimmonett@… | Owner: cedric.luthi@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Resolution: worksforme | Keywords: Port: libxml2 | ------------------------------------+--------------------------------------- Changes (by macsforever2000@…): * status: new => closed * resolution: => worksforme Comment: Glad you got it working. The portfile - and hence the checksums in it - have not changed recently. Either the problem was on your end - i.e. a corrupt download - or you got it from a different mirror which was corrupt. The former case is most common. -- Ticket URL: <http://trac.macports.org/ticket/24344#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts