#11143: `port -f archive foo` doesn't actually force the archive step if the state file says it's already done ---------------------------------------+------------------------------------ Reporter: macports@magicpacket.net | Owner: dluke@macports.org Type: defect | Status: new Priority: Low | Milestone: MacPorts base bugs Component: base | Version: 1.3.2 Resolution: | Keywords: ---------------------------------------+------------------------------------ Old description:

Daniel Luke asked me to file this report in [http://lists.macosforge.org/pipermail/macports- users/2006-December/000851.html this email].

I'll just demonstrate this with nmap +gtk2, but I'm pretty sure it will happen for any port. Sorry, no patch; I'm really busy and just trying to make stuff work.

Note that I make the archive, check the timestamp, then rerun the archive step with -f, but the timestamp is not updated. I then rerun it with -d for good measure.

{{{ ~# port archive nmap +gtk2 ---> Fetching nmap ---> Verifying checksum(s) for nmap ---> Extracting nmap ---> Configuring nmap ---> Building nmap with target all ---> Staging nmap into destroot ---> Packaging tgz archive for nmap 4.20_0+gtk2 ~# ls -l /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz -rw-rw---- 1 root wheel 680569 Dec 12 18:54 /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz ~# cat /opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_nmap/work/.darwinports.nmap.state variant: +gtk2 target: com.apple.main target: com.apple.fetch target: com.apple.checksum target: com.apple.extract target: com.apple.patch target: com.apple.configure target: com.apple.build target: com.apple.destroot target: com.apple.archive ~# port -f archive nmap +gtk2 ~# ls -l /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz -rw-rw---- 1 root wheel 680569 Dec 12 18:54 /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz ~# port -df archive nmap +gtk2 DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/nmap DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/nmap DEBUG: Requested variant powerpc is not provided by port nmap. DEBUG: Requested variant darwin is not provided by port nmap. DEBUG: Requested variant macosx is not provided by port nmap. DEBUG: Executing variant gtk2 provides gtk2 DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/libpcap DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/libpcap DEBUG: Searching for dependency: libpcap DEBUG: Found Dependency: receipt exists for libpcap DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/openssl DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/openssl DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/pcre DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/pcre DEBUG: Searching for dependency: pcre DEBUG: Found Dependency: receipt exists for pcre DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/archivers/zlib DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/archivers/zlib DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/x11/gtk2 DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/x11/gtk2 DEBUG: Searching for dependency: gtk2 DEBUG: Found Dependency: receipt exists for gtk2 DEBUG: Skipping completed com.apple.main (nmap) DEBUG: Skipping completed com.apple.fetch (nmap) DEBUG: Skipping completed com.apple.checksum (nmap) DEBUG: setting option extract.cmd to /opt/local/bin/bzip2 DEBUG: Skipping completed com.apple.extract (nmap) DEBUG: Skipping completed com.apple.patch (nmap) DEBUG: Skipping completed com.apple.configure (nmap) DEBUG: Skipping completed com.apple.build (nmap) DEBUG: Skipping completed com.apple.destroot (nmap) DEBUG: Skipping completed com.apple.archive (nmap) ~# }}}

This is with OS 10.4.8 on an iBook G4.

{{{ ~% uname -a Darwin maunakea.magicpacket.net 8.8.0 Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC Power Macintosh powerpc ~% port version Version: 1.320 ~% }}}

I don't demonstrate it here, but if you delete the last line of .darwinports.nmap.state (target: com.apple.archive) and rerun `port -f archive nmap +gtk2`, I believe it will appropriately rebuild the archive and clobber the .tgz.

Summary: When I run `port -f archive foo`, I expect the archive step to happen regardless of the state file. If the state file says the archive is already built, nothing happens.

New description: Daniel Luke asked me to file this report in [http://lists.macosforge.org/pipermail/macports- users/2006-December/000851.html this email]. I'll just demonstrate this with nmap +gtk2, but I'm pretty sure it will happen for any port. Sorry, no patch; I'm really busy and just trying to make stuff work. Note that I make the archive, check the timestamp, then rerun the archive step with -f, but the timestamp is not updated. I then rerun it with -d for good measure. {{{ ~# port archive nmap +gtk2 ---> Fetching nmap ---> Verifying checksum(s) for nmap ---> Extracting nmap ---> Configuring nmap ---> Building nmap with target all ---> Staging nmap into destroot ---> Packaging tgz archive for nmap 4.20_0+gtk2 ~# ls -l /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz -rw-rw---- 1 root wheel 680569 Dec 12 18:54 /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz ~# cat /opt/local/var/db/dports/build/_opt_local_var_db_dports_sources_rsync.rsync.darwinports.org_dpupdate_dports_net_nmap/work/.darwinports.nmap.state variant: +gtk2 target: com.apple.main target: com.apple.fetch target: com.apple.checksum target: com.apple.extract target: com.apple.patch target: com.apple.configure target: com.apple.build target: com.apple.destroot target: com.apple.archive ~# port -f archive nmap +gtk2 ~# ls -l /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz -rw-rw---- 1 root wheel 680569 Dec 12 18:54 /opt/local/var/db/dports/packages/darwin/powerpc/nmap-4.20_0+gtk2.powerpc.tgz ~# port -df archive nmap +gtk2 DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/nmap DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/nmap DEBUG: Requested variant powerpc is not provided by port nmap. DEBUG: Requested variant darwin is not provided by port nmap. DEBUG: Requested variant macosx is not provided by port nmap. DEBUG: Executing variant gtk2 provides gtk2 DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/libpcap DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/net/libpcap DEBUG: Searching for dependency: libpcap DEBUG: Found Dependency: receipt exists for libpcap DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/openssl DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/openssl DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/pcre DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/devel/pcre DEBUG: Searching for dependency: pcre DEBUG: Found Dependency: receipt exists for pcre DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/archivers/zlib DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/archivers/zlib DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Found port in file:///opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/x11/gtk2 DEBUG: Changing to port directory: /opt/local/var/db/dports/sources/rsync.rsync.darwinports.org_dpupdate_dports/x11/gtk2 DEBUG: Searching for dependency: gtk2 DEBUG: Found Dependency: receipt exists for gtk2 DEBUG: Skipping completed com.apple.main (nmap) DEBUG: Skipping completed com.apple.fetch (nmap) DEBUG: Skipping completed com.apple.checksum (nmap) DEBUG: setting option extract.cmd to /opt/local/bin/bzip2 DEBUG: Skipping completed com.apple.extract (nmap) DEBUG: Skipping completed com.apple.patch (nmap) DEBUG: Skipping completed com.apple.configure (nmap) DEBUG: Skipping completed com.apple.build (nmap) DEBUG: Skipping completed com.apple.destroot (nmap) DEBUG: Skipping completed com.apple.archive (nmap) ~# }}} This is with OS 10.4.8 on an iBook G4. {{{ ~% uname -a Darwin maunakea.magicpacket.net 8.8.0 Darwin Kernel Version 8.8.0: Fri Sep 8 17:18:57 PDT 2006; root:xnu-792.12.6.obj~1/RELEASE_PPC Power Macintosh powerpc ~% port version Version: 1.320 ~% }}} I don't demonstrate it here, but if you delete the last line of .darwinports.nmap.state (target: com.apple.archive) and rerun `port -f archive nmap +gtk2`, I believe it will appropriately rebuild the archive and clobber the .tgz. Summary: When I run `port -f archive foo`, I expect the archive step to happen regardless of the state file. If the state file says the archive is already built, nothing happens. Comment (by jmpp@macports.org): I was looking into what I thought was a related bug but came up empty handed. I've found that in order to successfully force some steps a clean action is necessary in advance (to remove the state file, as indeed we seem to respect it a tad too much). So maybe we could refocus this bug on that, deciding when we should respect the state file and when to ignore it, if forcing is requested? Other than that, forcing does work if there's no state file (as said, if the work dir is pruned by cleaning). -jmpp -- Ticket URL: <http://trac.macosforge.org/projects/macports/ticket/11143#comment:6> MacPorts </projects/macports> Ports system for Mac OS