#29493: libgpg-error-1.10 Checksum (md5) mismatch for ---------------------------------+------------------------------------------ Reporter: nsowatsk@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Resolution: worksforme | Keywords: Port: libgpg-error | ---------------------------------+------------------------------------------ Changes (by cal@…): * keywords: libgpg-error Checksum mismatch => * status: new => closed * resolution: => worksforme Comment: Please delete ${PREFIX}/var/macports/distfiles/libgpg-error/libgpg- error-1.10.tar.bz2 and run sudo port -d checksum libgpg-error, reopen this bug and paste it's output if it fails again. Please also read MisbehavingServers and check the problem is not caused by one of the first three bullet points. -- Ticket URL: <https://trac.macports.org/ticket/29493#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS

#29493: libgpg-error-1.10 Checksum (md5) mismatch for ---------------------------------+------------------------------------------ Reporter: nsowatsk@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Resolution: | Keywords: Port: libgpg-error | ---------------------------------+------------------------------------------ Changes (by nsowatsk@…): * status: closed => reopened * resolution: worksforme => Comment: Replying to [comment:2 cal@…]:

Instead of deleting the file manually, please use sudo port clean --dist libgpg-error. Sorry for the misinformation.

Ah, should have read all my emails ... I did the manual thing first, then saw the second comment :-( sudo port clean --dist libgpg-errorError: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error": no such file or directory To report a bug, see <http://guide.macports.org/#project.tickets> Any ideas of how to sort this one out? Thanks Nathan -- Ticket URL: <https://trac.macports.org/ticket/29493#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS

#29493: libgpg-error-1.10 Checksum (md5) mismatch for ---------------------------------+------------------------------------------ Reporter: nsowatsk@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Resolution: | Keywords: Port: libgpg-error | ---------------------------------+------------------------------------------ Comment(by nsowatsk@…): {{{ OK, this is what I get: sudo port -d checksum libgpg-errorPassword: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error DEBUG: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error": no such file or directory while executing "cd $portpath" (procedure "mportopen" line 31) invoked from within "mportopen $porturl [array get options] [array get requested_variations]" Error: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error": no such file or directory To report a bug, see <http://guide.macports.org/#project.tickets> dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ sudo port clean --dist libgpg-errorError: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error": no such file or directory To report a bug, see <http://guide.macports.org/#project.tickets> dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ sudo port -d checksum libgpg- errorDEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error DEBUG: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error": no such file or directory while executing "cd $portpath" (procedure "mportopen" line 31) invoked from within "mportopen $porturl [array get options] [array get requested_variations]" Error: Unable to open port: couldn't change working directory to "/opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error": no such file or directory To report a bug, see <http://guide.macports.org/#project.tickets> dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ }}} -- Ticket URL: <https://trac.macports.org/ticket/29493#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS

#29493: libgpg-error-1.10 Checksum (md5) mismatch for ---------------------------------+------------------------------------------ Reporter: nsowatsk@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Resolution: | Keywords: Port: libgpg-error | ---------------------------------+------------------------------------------ Comment(by nsowatsk@…): {{{sudo port -d checksum libgpg-errorDEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error DEBUG: OS darwin/10.7.0 (Mac OS X 10.6) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_devel_libgpg-error/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error/work DEBUG: Starting logging for libgpg-error DEBUG: Executing org.macports.main (libgpg-error) ---> Fetching libgpg-error DEBUG: fetch phase started at Wed May 18 14:52:13 CEST 2011 DEBUG: Executing org.macports.fetch (libgpg-error) ---> libgpg-error-1.10.tar.bz2 doesn't seem to exist in /opt/local/var/macports/distfiles/libgpg-error DEBUG: Pinging gd.tuwien.ac.at... DEBUG: Pinging ftp.freenet.de... DEBUG: Pinging ftp.jyu.fi... DEBUG: Pinging www.ring.gr.jp... DEBUG: Pinging ftp.gnupg.org... DEBUG: Pinging distfiles.macports.org... DEBUG: Pinging aarnet.au.distfiles.macports.org... DEBUG: Pinging cjj.kr.distfiles.macports.org... DEBUG: Pinging lil.fr.distfiles.macports.org... DEBUG: Pinging sea.us.distfiles.macports.org... DEBUG: Pinging ykf.ca.distfiles.macports.org... DEBUG: gd.tuwien.ac.at ping time is 69.123 DEBUG: ftp.freenet.de ping time is 49.476 DEBUG: ftp.jyu.fi ping time is 82.630 DEBUG: www.ring.gr.jp ping time is 332.885 DEBUG: ftp.gnupg.org ping time is 46.066 DEBUG: distfiles.macports.org ping time is 195.020 DEBUG: aarnet.au.distfiles.macports.org ping time is 364.810 DEBUG: cjj.kr.distfiles.macports.org ping time is 10000 DEBUG: lil.fr.distfiles.macports.org ping time is 53.224 DEBUG: sea.us.distfiles.macports.org ping time is 10000 DEBUG: ykf.ca.distfiles.macports.org ping time is 139.698 ---> Attempting to fetch libgpg-error-1.10.tar.bz2 from http://ftp.gnupg.org/gcrypt/libgpg-error % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 151 0 151 0 0 774 0 --:--:-- --:--:-- --:--:-- 2359 ---> Verifying checksum(s) for libgpg-error DEBUG: checksum phase started at Wed May 18 14:52:16 CEST 2011 DEBUG: Executing org.macports.checksum (libgpg-error) ---> Checksumming libgpg-error-1.10.tar.bz2 Error: Checksum (md5) mismatch for libgpg-error-1.10.tar.bz2 Portfile checksum: libgpg-error-1.10.tar.bz2 md5 736a03daa9dc5873047d4eb4a9c22a16 Distfile checksum: libgpg-error-1.10.tar.bz2 md5 22095249612f80b74ccb0820b902ec19 Error: Checksum (sha1) mismatch for libgpg-error-1.10.tar.bz2 Portfile checksum: libgpg-error-1.10.tar.bz2 sha1 95b324359627fbcb762487ab6091afbe59823b29 Distfile checksum: libgpg-error-1.10.tar.bz2 sha1 616b0cb40c9e17a7c4969da52b0956bb25af2c91 Error: Checksum (rmd160) mismatch for libgpg-error-1.10.tar.bz2 Portfile checksum: libgpg-error-1.10.tar.bz2 rmd160 435fcf1c748ae6877b5de7f133a741cd55dc1140 Distfile checksum: libgpg-error-1.10.tar.bz2 rmd160 348e6554664ec43ab4aa04b6b0e198a5643adc55 The correct checksum line may be: checksums md5 22095249612f80b74ccb0820b902ec19 \ sha1 616b0cb40c9e17a7c4969da52b0956bb25af2c91 \ rmd160 348e6554664ec43ab4aa04b6b0e198a5643adc55 *** The non-matching file appears to be HTML. See this page for possible reasons for the checksum mismatch: <http://trac.macports.org/wiki/MisbehavingServers> *** Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for libgpg-error): org.macports.checksum Log for libgpg-error is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_devel_libgpg-error/main.log Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> dhcp-mdr1-vl300-64-103-17-54:local nsowatsk$ }}} -- Ticket URL: <https://trac.macports.org/ticket/29493#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS

#29493: libgpg-error-1.10 Checksum (md5) mismatch for ---------------------------------+------------------------------------------ Reporter: nsowatsk@… | Owner: macports-tickets@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Resolution: | Keywords: haspatch Port: libgpg-error | ---------------------------------+------------------------------------------ Comment(by nsowatsk@…): Applied patch, problem fixed. Many thanks! :-) Nathan -- Ticket URL: <https://trac.macports.org/ticket/29493#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS