#33070: p5.14-b-hooks-op-check-stashchange fails to configure --------------------------------+------------------------------------------- Reporter: raramayo@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.3 Keywords: | Port: p5.14-b-hooks-op-check-stashchange --------------------------------+------------------------------------------- Comment(by raramayo@…): {{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.14 5.14.1_2 exists in the ports tree :debug:main perl5.14 5.14.1_2 +threads is the latest installed :debug:main perl5.14 5.14.1_2 +threads is active :debug:main Merging existing variants '+threads' into variants :debug:main new fully merged portvariants: threads + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.14 :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided:debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant threads provides threads :debug:main No need to upgrade! perl5.14 5.14.1_2 >= perl5.14 5.14.1_2:debug:main epoch: in tree: 0 installed: 0 :debug:main gdbm 1.10_1 exists in the ports tree :debug:main gdbm 1.10_1 +universal is the latest installed :debug:main gdbm 1.10_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided:debug:main adding the default universal variant:debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf:debug:main Executing variant universal provides universal :debug:main No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1:debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree:debug:main gettext 0.18.1.1_2 +universal is the latest installed :debug:main gettext 0.18.1.1_2 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext:debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386:debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided:debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2:debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree:debug:main libiconv 1.14_0 +universal is the latest installed :debug:main libiconv 1.14_0 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main Executing variant universal provides universal :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 +universal is the latest installed :debug:main ncurses 5.9_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.0.1_1 exists in the ports tree :debug:main expat 2.0.1_1 +universal is the latest installed :debug:main expat 2.0.1_1 +universal is active :debug:main Merging existing variants '+universal' into variants :debug:main new fully merged portvariants: universal + :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main Executing variant universal provides universal :debug:main No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5.14-b-hooks-op-check 0.180.0_2 exists in the ports tree :debug:main p5.14-b-hooks-op-check 0.180.0_2 is the latest installed :debug:main p5.14-b-hooks-op-check 0.180.0_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-b -hooks-op-check :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for livecheck.version :debug:main Re-registering default for configure.universal_args :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! p5.14-b-hooks-op-check 0.180.0_2 >= p5.14-b-hooks-op-check 0.180.0_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5.14-extutils-depends 0.304.0_0 exists in the ports tree :debug:main p5.14-extutils-depends 0.304.0_0 is the latest installed :debug:main p5.14-extutils-depends 0.304.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -extutils-depends :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for livecheck.version :debug:main Re-registering default for configure.universal_args :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! p5.14-extutils-depends 0.304.0_0 >= p5.14 -extutils-depends 0.304.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main p5.14-parent 0.224.0_2 exists in the ports tree :debug:main p5.14-parent 0.224.0_2 is the latest installed :debug:main p5.14-parent 0.224.0_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-parent :debug:main OS darwin/10.8.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl :debug:main Re-registering default for livecheck.version :debug:main Re-registering default for configure.universal_args :debug:main only one arch supported, so not adding the default universal variant :debug:main No need to upgrade! p5.14-parent 0.224.0_2 >= p5.14-parent 0.224.0_2 :msg:main ---> Computing dependencies for p5.14-b-hooks-op-check- stashchange:info:main .:debug:main Searching for dependency: perl5.14 :debug:main Found Dependency: receipt exists for perl5.14 :debug:main Searching for dependency: p5.14-b-hooks-op-check :debug:main Found Dependency: receipt exists for p5.14-b-hooks-op-check :debug:main Searching for dependency: p5.14-extutils-depends :debug:main Found Dependency: receipt exists for p5.14-extutils-depends :debug:main Searching for dependency: p5.14-parent :debug:main Found Dependency: receipt exists for p5.14-parent :msg:main :debug:main Executing org.macports.main (p5.14-b-hooks-op-check- stashchange) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 510 :debug:main euid changed to: 510 :debug:archivefetch archivefetch phase started at Tue Jan 31 10:35:19 CST 2012 :msg:archivefetch ---> Fetching archive for p5.14-b-hooks-op-check- stashchange :debug:archivefetch Executing org.macports.archivefetch (p5.14-b-hooks-op- check-stashchange) :debug:archivefetch euid/egid changed to: 0/0 :debug:archivefetch chowned /opt/local/var/macports/software/p5.14-b -hooks-op-check-stashchange to macports :debug:archivefetch euid/egid changed to: 510/510 :debug:archivefetch euid/egid changed to: 0/0 :debug:archivefetch chowned /opt/local/var/macports/incoming to macports :debug:archivefetch euid/egid changed to: 510/510 :info:archivefetch ---> p5.14-b-hooks-op-check- stashchange-0.60.0_2.darwin_10.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/p5.14-b-hooks-op-check-stashchange :msg:archivefetch ---> Attempting to fetch p5.14-b-hooks-op-check- stashchange-0.60.0_2.darwin_10.x86_64.tbz2 from http://packages.macports.org/p5.14-b-hooks-op-check-stashchange :debug:archivefetch Fetching archive failed:: The requested URL returned error: 404 :debug:archivefetch Privilege de-escalation not attempted as not running as root. :debug:fetch fetch phase started at Tue Jan 31 10:35:19 CST 2012 :notice:fetch ---> Fetching p5.14-b-hooks-op-check-stashchange :debug:fetch euid/egid changed to: 0/0 :debug:fetch chowned /opt/local/var/macports/distfiles/perl5 to macports :debug:fetch euid/egid changed to: 510/510 :debug:fetch Executing org.macports.fetch (p5.14-b-hooks-op-check- stashchange) :debug:fetch Privilege de-escalation not attempted as not running as root. :debug:checksum checksum phase started at Tue Jan 31 10:35:19 CST 2012 :notice:checksum ---> Verifying checksum(s) for p5.14-b-hooks-op-check- stashchange :debug:checksum Executing org.macports.checksum (p5.14-b-hooks-op-check- stashchange) :info:checksum ---> Checksumming B-Hooks-OP-Check-StashChange-0.06.tar.gz :debug:checksum Correct (md5) checksum for B-Hooks-OP-Check- StashChange-0.06.tar.gz :debug:checksum Correct (sha1) checksum for B-Hooks-OP-Check- StashChange-0.06.tar.gz :debug:checksum Correct (rmd160) checksum for B-Hooks-OP-Check- StashChange-0.06.tar.gz :debug:checksum Privilege de-escalation not attempted as not running as root. :debug:extract extract phase started at Tue Jan 31 10:35:19 CST 2012 :notice:extract ---> Extracting p5.14-b-hooks-op-check-stashchange :debug:extract Executing org.macports.extract (p5.14-b-hooks-op-check- stashchange) :info:extract ---> Extracting B-Hooks-OP-Check-StashChange-0.06.tar.gz :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/perl5/B-Hooks-OP-Check- StashChange-0.06.tar.gz' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-sta\ shchange/p5.14-b-hooks-op-check-stashchange/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5.14-b-hooks-op-check-stashch\ ange/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/perl5/B -Hooks-OP-Check-StashChange-0.06.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' :debug:extract Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5.14-b-hooks-op-check-st\ ashchange/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/perl5/B-Hooks-OP-Check- StashChange-0.06.tar.gz' | /usr/bin/gnutar --no-same-owner -xf - :debug:extract euid/egid changed to: 0/0 :debug:extract chowned /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5.14-b-hooks-op-check-stashchange/work to mac\ ports :debug:extract euid/egid changed to: 510/510 :debug:extract Privilege de-escalation not attempted as not running as root. :debug:patch patch phase started at Tue Jan 31 10:35:19 CST 2012 :debug:patch Executing org.macports.patch (p5.14-b-hooks-op-check- stashchange) :debug:patch Privilege de-escalation not attempted as not running as root. :debug:configure configure phase started at Tue Jan 31 10:35:19 CST 2012 :notice:configure ---> Configuring p5.14-b-hooks-op-check-stashchange :debug:configure Using compiler 'Mac OS X gcc 4.2' :debug:configure Executing org.macports.configure (p5.14-b-hooks-op-check- stashchange) :debug:configure Environment: CPATH='/opt/local/include' CFLAGS='-pipe -O2 -arch x86_64' CPPFLAGS='-I/opt/local/include' CXXFLAGS='-pipe -O2 -arch x86_64' LIBRARY_PATH='/opt/local/lib' MACOSX_DEPLOYMEN\ T_TARGET='10.6' CXX='/usr/bin/g++-4.2' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5.14-b\ -hooks-op-check-stashchange/work/.CC_PRINT_OPTIONS' F90FLAGS='-pipe -O2 -m64' LDFLAGS='-L/opt/local/lib -arch x86_64' FCFLAGS='-pipe -O2 -m64' OBJC='/usr/bin/gcc-4.2' INSTALL='/usr/bin/install -c' PERL\ _AUTOINSTALL='--skipdeps' OBJCFLAGS='-pipe -O2 -arch x86_64' FFLAGS='-pipe -O2 -m64' CC_PRINT_OPTIONS='YES' CC='/usr/bin/gcc-4.2' :debug:configure Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5.14-b-hooks-op-check-stash\ change/work/B-Hooks-OP-Check-StashChange-0.06" && /opt/local/bin/perl5.14 Makefile.PL INSTALLDIRS=vendor' :debug:configure Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5.14-b-hooks-op-check-\ stashchange/work/B-Hooks-OP-Check-StashChange-0.06" && /opt/local/bin/perl5.14 Makefile.PL INSTALLDIRS=vendor :info:configure Use of qw(...) as parentheses is deprecated at /opt/local/lib/perl5/vendor_perl/5.14.1/ExtUtils/MM_Any.pm line 987. :info:configure Cannot determine perl version info from lib/B/Hooks/OP/Check/StashChange.pm :info:configure *** Can't load dependency information for B::Hooks::OP::Check: :info:configure Can't locate B/Hooks/OP/Check/Install/Files.pm in @INC (@INC contains: inc /opt/local/lib/perl5/site_perl/5.14.1/darwin-thread- multi-2level /opt/local/lib/perl5/site_perl/5.14.1 /opt\ /local/lib/perl5/vendor_perl/5.14.1/darwin-thread-multi-2level /opt/local/lib/perl5/vendor_perl/5.14.1 /opt/local/lib/perl5/5.14.1 /darwin-thread-multi-2level /opt/local/lib/perl5/5.14.1 /opt/local/lib/\ perl5/site_perl /opt/local/lib/perl5/vendor_perl .) at /opt/local/lib/perl5/vendor_perl/5.14.1/ExtUtils/Depends.pm line 170. :info:configure :info:configure shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5.14-b-hooks-op-check-stashchang\ e/work/B-Hooks-OP-Check-StashChange-0.06" && /opt/local/bin/perl5.14 Makefile.PL INSTALLDIRS=vendor " returned error 2 :error:configure Target org.macports.configure returned: configure failure: shell command failed (see log for details) :debug:configure Backtrace: configure failure: shell command failed (see log for details) while executing "$procedure $targetname" :info:configure Warning: the following items did not execute (for p5.14-b -hooks-op-check-stashchange): org.macports.activate org.macports.configure org.macports.build org.macports.destroot org.macports\ .install :notice:configure Log for p5.14-b-hooks-op-check-stashchange is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_perl_p5-b -hooks-op-check-stashchange/p5\ .14-b-hooks-op-check-stashchange/main.log }}} -- Ticket URL: <https://trac.macports.org/ticket/33070#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS