[MacPorts] #30418: git-core: Unable to verify file checksums
#30418: git-core: Unable to verify file checksums ------------------------------+--------------------------------------------- Reporter: ray@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: ------------------------------+--------------------------------------------- # port -d install git-core DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /git-core DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /git-core DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port git-core. DEBUG: Requested variant i386 is not provided by port git-core. DEBUG: Requested variant macosx is not provided by port git-core. DEBUG: Executing variant doc provides doc DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_4 exists in the ports tree DEBUG: zlib 1.2.3_4 is the latest installed DEBUG: zlib 1.2.3_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8l_0 exists in the ports tree DEBUG: openssl 0.9.8l_0 +darwin is the latest installed DEBUG: openssl 0.9.8l_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 ---> Computing dependencies for git-core DEBUG: Searching for dependency: curl DEBUG: Didn't find receipt, going to depspec regex for: curl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port curl. DEBUG: Requested variant i386 is not provided by port curl. DEBUG: Requested variant macosx is not provided by port curl. DEBUG: Executing variant ssl provides ssl DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: expat DEBUG: Found Dependency: receipt exists for expat DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: rsync DEBUG: Didn't find receipt, going to depspec regex for: rsync DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port rsync. DEBUG: Requested variant i386 is not provided by port rsync. DEBUG: Requested variant macosx is not provided by port rsync. DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: p5-error DEBUG: Didn't find receipt, going to depspec regex for: p5-error DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-error. DEBUG: Requested variant i386 is not provided by port p5-error. DEBUG: Requested variant macosx is not provided by port p5-error. DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: libidn DEBUG: Found Dependency: receipt exists for libidn DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: curl-ca-bundle DEBUG: Didn't find receipt, going to depspec regex for: curl-ca-bundle DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net /curl-ca-bundle DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl- ca-bundle DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port curl-ca-bundle. DEBUG: Requested variant i386 is not provided by port curl-ca-bundle. DEBUG: Requested variant macosx is not provided by port curl-ca-bundle. DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: popt DEBUG: Didn't find receipt, going to depspec regex for: popt DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port popt. DEBUG: Requested variant i386 is not provided by port popt. DEBUG: Requested variant macosx is not provided by port popt. DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Executing org.macports.main (curl-ca-bundle) DEBUG: Skipping completed org.macports.fetch (curl-ca-bundle) ---> Verifying checksum(s) for curl-ca-bundle DEBUG: Executing org.macports.checksum (curl-ca-bundle) ---> Checksumming curl-7.20.0.tar.bz2 DEBUG: Correct (md5) checksum for curl-7.20.0.tar.bz2 DEBUG: Correct (sha1) checksum for curl-7.20.0.tar.bz2 DEBUG: Correct (rmd160) checksum for curl-7.20.0.tar.bz2 ---> Checksumming certdata-1.58.txt Error: Checksum (md5) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt md5 7d0926c462d973ebd4beee6f004ebcc5 Distfile checksum: certdata-1.58.txt md5 6eb398ea0c4b2b77ba7ea60243e03403 Error: Checksum (sha1) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt sha1 a5c98c10313a1e250a38df1fa53fb9978773891e Distfile checksum: certdata-1.58.txt sha1 b1cc5cee9dc829873ba60ede8346e3b6461cb364 Error: Checksum (rmd160) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt rmd160 7269b98e326e98b247a9d613dc1c11b06121caae Distfile checksum: certdata-1.58.txt rmd160 eae6885e152bbb40caeea6b1b14f74d5bcb407aa The correct checksum line may be: checksums curl-7.20.0.tar.bz2 \ md5 3dda78c4a808d9a779dc3a2ae81b47d8 \ sha1 89215fc4c4cd1e42134d6117255c401372e628de \ rmd160 9418ab686551af58df84960277868c77836d6817 \ certdata-1.58.txt \ md5 6eb398ea0c4b2b77ba7ea60243e03403 \ sha1 b1cc5cee9dc829873ba60ede8346e3b6461cb364 \ rmd160 eae6885e152bbb40caeea6b1b14f74d5bcb407aa Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for curl-ca-bundle): org.macports.activate org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: The following dependencies failed to build: curl curl-ca-bundle p5-error rsync popt Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> -- Ticket URL: <https://trac.macports.org/ticket/30418> MacPorts <http://www.macports.org/> Ports system for Mac OS
#30418: git-core: Unable to verify file checksums ------------------------------+--------------------------------------------- Reporter: ray@… | Owner: maccheck@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: git-core ------------------------------+--------------------------------------------- Changes (by ryandesign@…): * owner: macports-tickets@… => maccheck@… * port: => git-core Old description:
# port -d install git-core DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /git-core DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /git-core DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port git-core. DEBUG: Requested variant i386 is not provided by port git-core. DEBUG: Requested variant macosx is not provided by port git-core. DEBUG: Executing variant doc provides doc DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_4 exists in the ports tree DEBUG: zlib 1.2.3_4 is the latest installed DEBUG: zlib 1.2.3_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8l_0 exists in the ports tree DEBUG: openssl 0.9.8l_0 +darwin is the latest installed DEBUG: openssl 0.9.8l_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 ---> Computing dependencies for git-core DEBUG: Searching for dependency: curl DEBUG: Didn't find receipt, going to depspec regex for: curl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port curl. DEBUG: Requested variant i386 is not provided by port curl. DEBUG: Requested variant macosx is not provided by port curl. DEBUG: Executing variant ssl provides ssl DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: expat DEBUG: Found Dependency: receipt exists for expat DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: rsync DEBUG: Didn't find receipt, going to depspec regex for: rsync DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port rsync. DEBUG: Requested variant i386 is not provided by port rsync. DEBUG: Requested variant macosx is not provided by port rsync. DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: p5-error DEBUG: Didn't find receipt, going to depspec regex for: p5-error DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-error. DEBUG: Requested variant i386 is not provided by port p5-error. DEBUG: Requested variant macosx is not provided by port p5-error. DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: libidn DEBUG: Found Dependency: receipt exists for libidn DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: curl-ca-bundle DEBUG: Didn't find receipt, going to depspec regex for: curl-ca-bundle DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net /curl-ca-bundle DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net /curl-ca-bundle DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port curl-ca-bundle. DEBUG: Requested variant i386 is not provided by port curl-ca-bundle. DEBUG: Requested variant macosx is not provided by port curl-ca-bundle. DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: popt DEBUG: Didn't find receipt, going to depspec regex for: popt DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port popt. DEBUG: Requested variant i386 is not provided by port popt. DEBUG: Requested variant macosx is not provided by port popt. DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Executing org.macports.main (curl-ca-bundle) DEBUG: Skipping completed org.macports.fetch (curl-ca-bundle) ---> Verifying checksum(s) for curl-ca-bundle DEBUG: Executing org.macports.checksum (curl-ca-bundle) ---> Checksumming curl-7.20.0.tar.bz2 DEBUG: Correct (md5) checksum for curl-7.20.0.tar.bz2 DEBUG: Correct (sha1) checksum for curl-7.20.0.tar.bz2 DEBUG: Correct (rmd160) checksum for curl-7.20.0.tar.bz2 ---> Checksumming certdata-1.58.txt Error: Checksum (md5) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt md5 7d0926c462d973ebd4beee6f004ebcc5 Distfile checksum: certdata-1.58.txt md5 6eb398ea0c4b2b77ba7ea60243e03403 Error: Checksum (sha1) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt sha1 a5c98c10313a1e250a38df1fa53fb9978773891e Distfile checksum: certdata-1.58.txt sha1 b1cc5cee9dc829873ba60ede8346e3b6461cb364 Error: Checksum (rmd160) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt rmd160 7269b98e326e98b247a9d613dc1c11b06121caae Distfile checksum: certdata-1.58.txt rmd160 eae6885e152bbb40caeea6b1b14f74d5bcb407aa The correct checksum line may be: checksums curl-7.20.0.tar.bz2 \ md5 3dda78c4a808d9a779dc3a2ae81b47d8 \ sha1 89215fc4c4cd1e42134d6117255c401372e628de \ rmd160 9418ab686551af58df84960277868c77836d6817 \ certdata-1.58.txt \ md5 6eb398ea0c4b2b77ba7ea60243e03403 \ sha1 b1cc5cee9dc829873ba60ede8346e3b6461cb364 \ rmd160 eae6885e152bbb40caeea6b1b14f74d5bcb407aa Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for curl-ca-bundle): org.macports.activate org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: The following dependencies failed to build: curl curl-ca-bundle p5-error rsync popt Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets>
New description: {{{ # port -d install git-core DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /git-core DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /git-core DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: not using configure, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port git-core. DEBUG: Requested variant i386 is not provided by port git-core. DEBUG: Requested variant macosx is not provided by port git-core. DEBUG: Executing variant doc provides doc DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.3_4 exists in the ports tree DEBUG: zlib 1.2.3_4 is the latest installed DEBUG: zlib 1.2.3_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port zlib. DEBUG: Requested variant i386 is not provided by port zlib. DEBUG: Requested variant macosx is not provided by port zlib. DEBUG: No need to upgrade! zlib 1.2.3_4 >= zlib 1.2.3_4 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 0.9.8l_0 exists in the ports tree DEBUG: openssl 0.9.8l_0 +darwin is the latest installed DEBUG: openssl 0.9.8l_0 +darwin is active DEBUG: Merging existing variants darwin into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant i386 is not provided by port openssl. DEBUG: Requested variant macosx is not provided by port openssl. DEBUG: Executing variant darwin provides darwin DEBUG: No need to upgrade! openssl 0.9.8l_0 >= openssl 0.9.8l_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13.1_0 exists in the ports tree DEBUG: libiconv 1.13.1_0 is the latest installed DEBUG: libiconv 1.13.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 ---> Computing dependencies for git-core DEBUG: Searching for dependency: curl DEBUG: Didn't find receipt, going to depspec regex for: curl DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port curl. DEBUG: Requested variant i386 is not provided by port curl. DEBUG: Requested variant macosx is not provided by port curl. DEBUG: Executing variant ssl provides ssl DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: expat DEBUG: Found Dependency: receipt exists for expat DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: rsync DEBUG: Didn't find receipt, going to depspec regex for: rsync DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/rsync DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port rsync. DEBUG: Requested variant i386 is not provided by port rsync. DEBUG: Requested variant macosx is not provided by port rsync. DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: p5-error DEBUG: Didn't find receipt, going to depspec regex for: p5-error DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5-error DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-error. DEBUG: Requested variant i386 is not provided by port p5-error. DEBUG: Requested variant macosx is not provided by port p5-error. DEBUG: Searching for dependency: zlib DEBUG: Found Dependency: receipt exists for zlib DEBUG: Searching for dependency: libidn DEBUG: Found Dependency: receipt exists for libidn DEBUG: Searching for dependency: openssl DEBUG: Found Dependency: receipt exists for openssl DEBUG: Searching for dependency: curl-ca-bundle DEBUG: Didn't find receipt, going to depspec regex for: curl-ca-bundle DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/net /curl-ca-bundle DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/net/curl- ca-bundle DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port curl-ca-bundle. DEBUG: Requested variant i386 is not provided by port curl-ca-bundle. DEBUG: Requested variant macosx is not provided by port curl-ca-bundle. DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Searching for dependency: popt DEBUG: Didn't find receipt, going to depspec regex for: popt DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/popt DEBUG: OS Platform: darwin DEBUG: OS Version: 10.5.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port popt. DEBUG: Requested variant i386 is not provided by port popt. DEBUG: Requested variant macosx is not provided by port popt. DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: gettext DEBUG: Found Dependency: receipt exists for gettext DEBUG: Searching for dependency: libiconv DEBUG: Found Dependency: receipt exists for libiconv DEBUG: Searching for dependency: perl5 DEBUG: Found Dependency: receipt exists for perl5 DEBUG: Executing org.macports.main (curl-ca-bundle) DEBUG: Skipping completed org.macports.fetch (curl-ca-bundle) ---> Verifying checksum(s) for curl-ca-bundle DEBUG: Executing org.macports.checksum (curl-ca-bundle) ---> Checksumming curl-7.20.0.tar.bz2 DEBUG: Correct (md5) checksum for curl-7.20.0.tar.bz2 DEBUG: Correct (sha1) checksum for curl-7.20.0.tar.bz2 DEBUG: Correct (rmd160) checksum for curl-7.20.0.tar.bz2 ---> Checksumming certdata-1.58.txt Error: Checksum (md5) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt md5 7d0926c462d973ebd4beee6f004ebcc5 Distfile checksum: certdata-1.58.txt md5 6eb398ea0c4b2b77ba7ea60243e03403 Error: Checksum (sha1) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt sha1 a5c98c10313a1e250a38df1fa53fb9978773891e Distfile checksum: certdata-1.58.txt sha1 b1cc5cee9dc829873ba60ede8346e3b6461cb364 Error: Checksum (rmd160) mismatch for certdata-1.58.txt Portfile checksum: certdata-1.58.txt rmd160 7269b98e326e98b247a9d613dc1c11b06121caae Distfile checksum: certdata-1.58.txt rmd160 eae6885e152bbb40caeea6b1b14f74d5bcb407aa The correct checksum line may be: checksums curl-7.20.0.tar.bz2 \ md5 3dda78c4a808d9a779dc3a2ae81b47d8 \ sha1 89215fc4c4cd1e42134d6117255c401372e628de \ rmd160 9418ab686551af58df84960277868c77836d6817 \ certdata-1.58.txt \ md5 6eb398ea0c4b2b77ba7ea60243e03403 \ sha1 b1cc5cee9dc829873ba60ede8346e3b6461cb364 \ rmd160 eae6885e152bbb40caeea6b1b14f74d5bcb407aa Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for curl-ca-bundle): org.macports.activate org.macports.extract org.macports.checksum org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: The following dependencies failed to build: curl curl-ca-bundle p5-error rsync popt Error: Status 1 encountered during processing. To report a bug, see <http://guide.macports.org/#project.tickets> }}} -- Comment: Please use WikiFormatting, fill in the Port field with the name of the affected port, Cc the maintainer of the affected port, and as explained in the [wiki:FAQ#checksums FAQ on checksum mismatches], show us which server the bad file came from. -- Ticket URL: <https://trac.macports.org/ticket/30418#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#30418: git-core: Unable to verify file checksums ------------------------------+--------------------------------------------- Reporter: ray@… | Owner: ryandesign@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Keywords: | Port: curl-ca-bundle ------------------------------+--------------------------------------------- Changes (by macsforever2000@…): * owner: maccheck@… => ryandesign@… * port: git-core => curl-ca-bundle Comment: The failed port is curl-ca-bundle. But you need to run selfupdate to get the latest version. -- Ticket URL: <https://trac.macports.org/ticket/30418#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#30418: git-core: Unable to verify file checksums -------------------------------+-------------------------------------------- Reporter: ray@… | Owner: ryandesign@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Resolution: invalid | Keywords: Port: curl-ca-bundle | -------------------------------+-------------------------------------------- Changes (by macsforever2000@…): * status: new => closed * resolution: => invalid -- Ticket URL: <https://trac.macports.org/ticket/30418#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#30418: git-core: Unable to verify file checksums -------------------------------+-------------------------------------------- Reporter: ray@… | Owner: ryandesign@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.2 Resolution: invalid | Keywords: Port: curl-ca-bundle | -------------------------------+-------------------------------------------- Comment(by ryandesign@…): Replying to [comment:2 macsforever2000@…]:
The failed port is curl-ca-bundle.
Oops, I completely overlooked that.
But you need to run selfupdate to get the latest version.
Indeed, certdata 1.58 was replaced with a newer version 16 months ago in r65681. Please selfupdate often so you don't experience issues we've fixed long ago. -- Ticket URL: <https://trac.macports.org/ticket/30418#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts