#28534: mutt-devel @1.5.21 +sidebar patch fails to apply ------------------------------+--------------------------------------------- Reporter: claus@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: mutt-devel ------------------------------+--------------------------------------------- Changes (by jmr@…): * keywords: mutt-devel sidebar => Old description:

When trying to install mutt-devel with named variants an error occurs (content of the logfile below). When discarding "+sidebar" everything works fine. Is there anything I could do?

Thanks a lot in advance - I REALLY appreciate your work! --- version:1 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gettext 0.18.1.1_2 exists in the ports tree :debug:clean gettext 0.18.1.1_2 is the latest installed :debug:clean gettext 0.18.1.1_2 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libiconv 1.13.1_0 exists in the ports tree :debug:clean libiconv 1.13.1_0 is the latest installed :debug:clean libiconv 1.13.1_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean ncurses 5.7_1 exists in the ports tree :debug:clean ncurses 5.7_1 is the latest installed :debug:clean ncurses 5.7_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean ncursesw 5.7_1 exists in the ports tree :debug:clean ncursesw 5.7_1 is the latest installed :debug:clean ncursesw 5.7_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean expat 2.0.1_1 exists in the ports tree :debug:clean expat 2.0.1_1 is the latest installed :debug:clean expat 2.0.1_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:clean epoch: in tree: 1 installed: 1 :debug:clean openssl 1.0.0d_0 exists in the ports tree :debug:clean openssl 1.0.0d_0 is the latest installed :debug:clean openssl 1.0.0d_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean zlib 1.2.5_0 exists in the ports tree :debug:clean zlib 1.2.5_0 is the latest installed :debug:clean zlib 1.2.5_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean cyrus-sasl2 2.1.23_3 exists in the ports tree :debug:clean cyrus-sasl2 2.1.23_3 +kerberos is the latest installed :debug:clean cyrus-sasl2 2.1.23_3 +kerberos is active :debug:clean Merging existing variants '+kerberos' into variants :debug:clean new fully merged portvariants: kerberos + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security /cyrus-sasl2 :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean Executing variant kerberos provides kerberos :debug:clean No need to upgrade! cyrus-sasl2 2.1.23_3 >= cyrus-sasl2 2.1.23_3 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gdbm 1.8.3_3 exists in the ports tree :debug:clean gdbm 1.8.3_3 is the latest installed :debug:clean gdbm 1.8.3_3 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gpgme 1.3.0_0 exists in the ports tree :debug:clean gpgme 1.3.0_0 is the latest installed :debug:clean gpgme 1.3.0_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! gpgme 1.3.0_0 >= gpgme 1.3.0_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gnupg 1.4.11_0 exists in the ports tree :debug:clean gnupg 1.4.11_0 is the latest installed :debug:clean gnupg 1.4.11_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! gnupg 1.4.11_0 >= gnupg 1.4.11_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean readline 6.2.000_0 exists in the ports tree :debug:clean readline 6.2.000_0 is the latest installed :debug:clean readline 6.2.000_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean bzip2 1.0.6_0 exists in the ports tree :debug:clean bzip2 1.0.6_0 is the latest installed :debug:clean bzip2 1.0.6_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libusb-compat 0.1.3_0 exists in the ports tree :debug:clean libusb-compat 0.1.3_0 is the latest installed :debug:clean libusb-compat 0.1.3_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libusb-compat :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat 0.1.3_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libusb 1.0.8_0 exists in the ports tree :debug:clean libusb 1.0.8_0 is the latest installed :debug:clean libusb 1.0.8_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libusb 1.0.8_0 >= libusb 1.0.8_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean pth 2.0.7_0 exists in the ports tree :debug:clean pth 2.0.7_0 is the latest installed :debug:clean pth 2.0.7_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! pth 2.0.7_0 >= pth 2.0.7_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libgpg-error 1.10_0 exists in the ports tree :debug:clean libgpg-error 1.10_0 is the latest installed :debug:clean libgpg-error 1.10_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libassuan 2.0.1_1 exists in the ports tree :debug:clean libassuan 2.0.1_1 is the latest installed :debug:clean libassuan 2.0.1_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libassuan :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libassuan 2.0.1_1 >= libassuan 2.0.1_1 :msg:clean ---> Computing dependencies for mutt-devel:info:clean .:debug:clean Searching for dependency: gettext :debug:clean Found Dependency: receipt exists for gettext :debug:clean Searching for dependency: libiconv :debug:clean Found Dependency: receipt exists for libiconv :debug:clean Searching for dependency: ncurses :debug:clean Found Dependency: receipt exists for ncurses :debug:clean Searching for dependency: openssl :debug:clean Found Dependency: receipt exists for openssl :debug:clean Searching for dependency: cyrus-sasl2 :debug:clean Found Dependency: receipt exists for cyrus-sasl2 :debug:clean Searching for dependency: gdbm :debug:clean Found Dependency: receipt exists for gdbm :debug:clean Searching for dependency: gpgme :debug:clean Found Dependency: receipt exists for gpgme :msg:clean :debug:main Executing org.macports.main (mutt-devel) :msg:main ---> Fetching mutt-devel :debug:fetch fetch phase started at Thu Feb 24 15:04:42 CET 2011 :debug:fetch Executing org.macports.fetch (mutt-devel) :msg:fetch ---> Verifying checksum(s) for mutt-devel :debug:checksum checksum phase started at Thu Feb 24 15:04:42 CET 2011 :debug:checksum Executing org.macports.checksum (mutt-devel) :info:checksum ---> Checksumming patch-1.5.20.sidebar.20090619.txt :debug:checksum Correct (md5) checksum for patch-1.5.20.sidebar.20090619.txt :info:checksum ---> Checksumming mutt-1.5.21.tar.gz :debug:checksum Correct (md5) checksum for mutt-1.5.21.tar.gz :debug:checksum Correct (sha1) checksum for mutt-1.5.21.tar.gz :debug:checksum Correct (rmd160) checksum for mutt-1.5.21.tar.gz :msg:checksum ---> Extracting mutt-devel :debug:extract extract phase started at Thu Feb 24 15:04:42 CET 2011 :debug:extract Executing org.macports.extract (mutt-devel) :info:extract ---> Extracting mutt-1.5.21.tar.gz :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/mutt-devel/mutt-1.5.21.tar.gz' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/mutt-devel/mutt-1.5.21.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' :debug:patch patch phase started at Thu Feb 24 15:04:45 CET 2011 :debug:patch Executing org.macports.patch (mutt-devel) :msg:patch ---> Applying patches to mutt-devel :info:patch ---> Applying /opt/local/var/macports/distfiles/mutt- devel/patch-1.5.20.sidebar.20090619.txt :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.21" && /usr/bin/patch -p0 -p1' :info:patch patching file buffy.c :info:patch Hunk #1 succeeded at 161 (offset 2 lines). :info:patch Hunk #2 succeeded at 325 (offset 11 lines). :info:patch Hunk #3 succeeded at 421 with fuzz 1 (offset 87 lines). :info:patch Hunk #4 FAILED at 461. :info:patch Hunk #5 FAILED at 519. :info:patch Hunk #6 FAILED at 549. :info:patch 3 out of 6 hunks FAILED -- saving rejects to file buffy.c.rej :info:patch patching file buffy.h :info:patch patching file color.c :info:patch patching file compose.c :info:patch Hunk #2 FAILED at 115. :info:patch Hunk #3 FAILED at 148. :info:patch Hunk #4 succeeded at 161 (offset -3 lines). :info:patch Hunk #5 succeeded at 175 (offset -3 lines). :info:patch Hunk #6 succeeded at 190 (offset -3 lines). :info:patch Hunk #7 succeeded at 242 (offset -3 lines). :info:patch Hunk #8 succeeded at 252 (offset -3 lines). :info:patch Hunk #9 succeeded at 266 (offset -3 lines). :info:patch Hunk #10 succeeded at 304 (offset -3 lines). :info:patch Hunk #11 succeeded at 549 (offset -3 lines). :info:patch Hunk #12 succeeded at 566 (offset -3 lines). :info:patch 2 out of 12 hunks FAILED -- saving rejects to file compose.c.rej :info:patch patching file curs_main.c :info:patch Hunk #2 succeeded at 521 (offset -4 lines). :info:patch Hunk #3 succeeded at 538 (offset -4 lines). :info:patch Hunk #4 succeeded at 561 (offset -4 lines). :info:patch Hunk #5 succeeded at 581 (offset -4 lines). :info:patch Hunk #6 succeeded at 1079 (offset 14 lines). :info:patch Hunk #7 succeeded at 1111 (offset 14 lines). :info:patch Hunk #8 succeeded at 1133 (offset 14 lines). :info:patch Hunk #9 succeeded at 2224 (offset 25 lines). :info:patch patching file flags.c :info:patch patching file functions.h :info:patch Hunk #1 succeeded at 169 (offset 1 line). :info:patch Hunk #2 succeeded at 277 (offset 4 lines). :info:patch patching file globals.h :info:patch Hunk #2 succeeded at 208 (offset 1 line). :info:patch patching file init.h :info:patch Hunk #1 succeeded at 1953 (offset 12 lines). :info:patch patching file mailbox.h :info:patch patching file Makefile.am :info:patch Hunk #1 FAILED at 29. :info:patch 1 out of 1 hunk FAILED -- saving rejects to file Makefile.am.rej :info:patch patching file Makefile.in :info:patch Hunk #1 FAILED at 85. :info:patch Hunk #2 FAILED at 357. :info:patch Hunk #3 succeeded at 393 with fuzz 1 (offset 3 lines). :info:patch 2 out of 3 hunks FAILED -- saving rejects to file Makefile.in.rej :info:patch patching file mbox.c :info:patch Hunk #2 succeeded at 252 (offset -4 lines). :info:patch patching file menu.c :info:patch Hunk #10 succeeded at 877 (offset -1 lines). :info:patch patching file mutt_curses.h :info:patch patching file mutt.h :info:patch Hunk #1 succeeded at 419 (offset 1 line). :info:patch Hunk #2 succeeded at 861 (offset 5 lines). :info:patch Hunk #3 succeeded at 896 (offset 5 lines). :info:patch patching file muttlib.c :info:patch Hunk #1 succeeded at 1286 (offset 54 lines). :info:patch Hunk #2 succeeded at 1331 (offset 55 lines). :info:patch patching file mx.c :info:patch Hunk #1 succeeded at 580 (offset -1 lines). :info:patch Hunk #2 succeeded at 603 (offset -1 lines). :info:patch Hunk #3 succeeded at 704 with fuzz 2 (offset -1 lines). :info:patch patching file OPS :info:patch Hunk #1 succeeded at 179 (offset 1 line). :info:patch patching file pager.c :info:patch Hunk #2 FAILED at 1072. :info:patch Hunk #3 succeeded at 1748 (offset 28 lines). :info:patch Hunk #4 succeeded at 1761 (offset 28 lines). :info:patch Hunk #5 succeeded at 1775 (offset 28 lines). :info:patch Hunk #6 succeeded at 1799 (offset 28 lines). :info:patch Hunk #7 succeeded at 1824 (offset 28 lines). :info:patch Hunk #8 succeeded at 2766 (offset 27 lines). :info:patch 1 out of 8 hunks FAILED -- saving rejects to file pager.c.rej :info:patch patching file PATCHES :info:patch patching file sidebar.c :info:patch patching file sidebar.h :info:patch patching file doc/Muttrc :info:patch patching file imap/imap.c :info:patch patching file imap/command.c :info:patch Hunk #1 succeeded at 1011 (offset 2 lines). :info:patch shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.21" && /usr/bin/patch -p0 -p1 < '/opt/local/var/macports/distfiles/mutt- devel/patch-1.5.20.sidebar.20090619.txt'" returned error 1 :error:patch Target org.macports.patch returned: shell command failed (see log for details) :debug:patch Backtrace: shell command failed (see log for details) while executing "command_exec patch "" "< '$patch'"" (procedure "portpatch::patch_main" line 35) invoked from within "$procedure $targetname" :info:patch Warning: the following items did not execute (for mutt- devel): org.macports.activate org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:patch Log for mutt-devel is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/main.log

New description: When trying to install mutt-devel with named variants an error occurs (content of the logfile below). When discarding "+sidebar" everything works fine. Is there anything I could do? Thanks a lot in advance - I REALLY appreciate your work! --- {{{ version:1 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gettext 0.18.1.1_2 exists in the ports tree :debug:clean gettext 0.18.1.1_2 is the latest installed :debug:clean gettext 0.18.1.1_2 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libiconv 1.13.1_0 exists in the ports tree :debug:clean libiconv 1.13.1_0 is the latest installed :debug:clean libiconv 1.13.1_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! libiconv 1.13.1_0 >= libiconv 1.13.1_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean ncurses 5.7_1 exists in the ports tree :debug:clean ncurses 5.7_1 is the latest installed :debug:clean ncurses 5.7_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! ncurses 5.7_1 >= ncurses 5.7_1 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean ncursesw 5.7_1 exists in the ports tree :debug:clean ncursesw 5.7_1 is the latest installed :debug:clean ncursesw 5.7_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! ncursesw 5.7_1 >= ncursesw 5.7_1 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean expat 2.0.1_1 exists in the ports tree :debug:clean expat 2.0.1_1 is the latest installed :debug:clean expat 2.0.1_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! expat 2.0.1_1 >= expat 2.0.1_1 :debug:clean epoch: in tree: 1 installed: 1 :debug:clean openssl 1.0.0d_0 exists in the ports tree :debug:clean openssl 1.0.0d_0 is the latest installed :debug:clean openssl 1.0.0d_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/openssl :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! openssl 1.0.0d_0 >= openssl 1.0.0d_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean zlib 1.2.5_0 exists in the ports tree :debug:clean zlib 1.2.5_0 is the latest installed :debug:clean zlib 1.2.5_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/zlib :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! zlib 1.2.5_0 >= zlib 1.2.5_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean cyrus-sasl2 2.1.23_3 exists in the ports tree :debug:clean cyrus-sasl2 2.1.23_3 +kerberos is the latest installed :debug:clean cyrus-sasl2 2.1.23_3 +kerberos is active :debug:clean Merging existing variants '+kerberos' into variants :debug:clean new fully merged portvariants: kerberos + :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/security /cyrus-sasl2 :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean Executing variant kerberos provides kerberos :debug:clean No need to upgrade! cyrus-sasl2 2.1.23_3 >= cyrus-sasl2 2.1.23_3 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gdbm 1.8.3_3 exists in the ports tree :debug:clean gdbm 1.8.3_3 is the latest installed :debug:clean gdbm 1.8.3_3 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/databases/gdbm :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! gdbm 1.8.3_3 >= gdbm 1.8.3_3 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gpgme 1.3.0_0 exists in the ports tree :debug:clean gpgme 1.3.0_0 is the latest installed :debug:clean gpgme 1.3.0_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gpgme :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! gpgme 1.3.0_0 >= gpgme 1.3.0_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean gnupg 1.4.11_0 exists in the ports tree :debug:clean gnupg 1.4.11_0 is the latest installed :debug:clean gnupg 1.4.11_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/mail/gnupg :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! gnupg 1.4.11_0 >= gnupg 1.4.11_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean readline 6.2.000_0 exists in the ports tree :debug:clean readline 6.2.000_0 is the latest installed :debug:clean readline 6.2.000_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/readline :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean bzip2 1.0.6_0 exists in the ports tree :debug:clean bzip2 1.0.6_0 is the latest installed :debug:clean bzip2 1.0.6_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/archivers/bzip2 :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean universal variant already exists, so not adding the default one :debug:clean No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libusb-compat 0.1.3_0 exists in the ports tree :debug:clean libusb-compat 0.1.3_0 is the latest installed :debug:clean libusb-compat 0.1.3_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libusb-compat :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libusb-compat 0.1.3_0 >= libusb-compat 0.1.3_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libusb 1.0.8_0 exists in the ports tree :debug:clean libusb 1.0.8_0 is the latest installed :debug:clean libusb 1.0.8_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libusb :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libusb 1.0.8_0 >= libusb 1.0.8_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean pth 2.0.7_0 exists in the ports tree :debug:clean pth 2.0.7_0 is the latest installed :debug:clean pth 2.0.7_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/pth :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! pth 2.0.7_0 >= pth 2.0.7_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libgpg-error 1.10_0 exists in the ports tree :debug:clean libgpg-error 1.10_0 is the latest installed :debug:clean libgpg-error 1.10_0 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel /libgpg-error :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0 :debug:clean epoch: in tree: 0 installed: 0 :debug:clean libassuan 2.0.1_1 exists in the ports tree :debug:clean libassuan 2.0.1_1 is the latest installed :debug:clean libassuan 2.0.1_1 is active :debug:clean Merging existing variants '' into variants :debug:clean new fully merged portvariants: :debug:clean Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libassuan :debug:clean OS darwin/10.6.0 (Mac OS X 10.6) arch i386 :debug:clean org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:clean org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:clean org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:clean adding the default universal variant :debug:clean Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:clean No need to upgrade! libassuan 2.0.1_1 >= libassuan 2.0.1_1 :msg:clean ---> Computing dependencies for mutt-devel:info:clean .:debug:clean Searching for dependency: gettext :debug:clean Found Dependency: receipt exists for gettext :debug:clean Searching for dependency: libiconv :debug:clean Found Dependency: receipt exists for libiconv :debug:clean Searching for dependency: ncurses :debug:clean Found Dependency: receipt exists for ncurses :debug:clean Searching for dependency: openssl :debug:clean Found Dependency: receipt exists for openssl :debug:clean Searching for dependency: cyrus-sasl2 :debug:clean Found Dependency: receipt exists for cyrus-sasl2 :debug:clean Searching for dependency: gdbm :debug:clean Found Dependency: receipt exists for gdbm :debug:clean Searching for dependency: gpgme :debug:clean Found Dependency: receipt exists for gpgme :msg:clean :debug:main Executing org.macports.main (mutt-devel) :msg:main ---> Fetching mutt-devel :debug:fetch fetch phase started at Thu Feb 24 15:04:42 CET 2011 :debug:fetch Executing org.macports.fetch (mutt-devel) :msg:fetch ---> Verifying checksum(s) for mutt-devel :debug:checksum checksum phase started at Thu Feb 24 15:04:42 CET 2011 :debug:checksum Executing org.macports.checksum (mutt-devel) :info:checksum ---> Checksumming patch-1.5.20.sidebar.20090619.txt :debug:checksum Correct (md5) checksum for patch-1.5.20.sidebar.20090619.txt :info:checksum ---> Checksumming mutt-1.5.21.tar.gz :debug:checksum Correct (md5) checksum for mutt-1.5.21.tar.gz :debug:checksum Correct (sha1) checksum for mutt-1.5.21.tar.gz :debug:checksum Correct (rmd160) checksum for mutt-1.5.21.tar.gz :msg:checksum ---> Extracting mutt-devel :debug:extract extract phase started at Thu Feb 24 15:04:42 CET 2011 :debug:extract Executing org.macports.extract (mutt-devel) :info:extract ---> Extracting mutt-1.5.21.tar.gz :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/mutt-devel/mutt-1.5.21.tar.gz' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work" && /usr/bin/gzip -dc '/opt/local/var/macports/distfiles/mutt-devel/mutt-1.5.21.tar.gz' | /usr/bin/gnutar --no-same-owner -xf -' :debug:patch patch phase started at Thu Feb 24 15:04:45 CET 2011 :debug:patch Executing org.macports.patch (mutt-devel) :msg:patch ---> Applying patches to mutt-devel :info:patch ---> Applying /opt/local/var/macports/distfiles/mutt- devel/patch-1.5.20.sidebar.20090619.txt :debug:patch Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:patch Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.21" && /usr/bin/patch -p0 -p1' :info:patch patching file buffy.c :info:patch Hunk #1 succeeded at 161 (offset 2 lines). :info:patch Hunk #2 succeeded at 325 (offset 11 lines). :info:patch Hunk #3 succeeded at 421 with fuzz 1 (offset 87 lines). :info:patch Hunk #4 FAILED at 461. :info:patch Hunk #5 FAILED at 519. :info:patch Hunk #6 FAILED at 549. :info:patch 3 out of 6 hunks FAILED -- saving rejects to file buffy.c.rej :info:patch patching file buffy.h :info:patch patching file color.c :info:patch patching file compose.c :info:patch Hunk #2 FAILED at 115. :info:patch Hunk #3 FAILED at 148. :info:patch Hunk #4 succeeded at 161 (offset -3 lines). :info:patch Hunk #5 succeeded at 175 (offset -3 lines). :info:patch Hunk #6 succeeded at 190 (offset -3 lines). :info:patch Hunk #7 succeeded at 242 (offset -3 lines). :info:patch Hunk #8 succeeded at 252 (offset -3 lines). :info:patch Hunk #9 succeeded at 266 (offset -3 lines). :info:patch Hunk #10 succeeded at 304 (offset -3 lines). :info:patch Hunk #11 succeeded at 549 (offset -3 lines). :info:patch Hunk #12 succeeded at 566 (offset -3 lines). :info:patch 2 out of 12 hunks FAILED -- saving rejects to file compose.c.rej :info:patch patching file curs_main.c :info:patch Hunk #2 succeeded at 521 (offset -4 lines). :info:patch Hunk #3 succeeded at 538 (offset -4 lines). :info:patch Hunk #4 succeeded at 561 (offset -4 lines). :info:patch Hunk #5 succeeded at 581 (offset -4 lines). :info:patch Hunk #6 succeeded at 1079 (offset 14 lines). :info:patch Hunk #7 succeeded at 1111 (offset 14 lines). :info:patch Hunk #8 succeeded at 1133 (offset 14 lines). :info:patch Hunk #9 succeeded at 2224 (offset 25 lines). :info:patch patching file flags.c :info:patch patching file functions.h :info:patch Hunk #1 succeeded at 169 (offset 1 line). :info:patch Hunk #2 succeeded at 277 (offset 4 lines). :info:patch patching file globals.h :info:patch Hunk #2 succeeded at 208 (offset 1 line). :info:patch patching file init.h :info:patch Hunk #1 succeeded at 1953 (offset 12 lines). :info:patch patching file mailbox.h :info:patch patching file Makefile.am :info:patch Hunk #1 FAILED at 29. :info:patch 1 out of 1 hunk FAILED -- saving rejects to file Makefile.am.rej :info:patch patching file Makefile.in :info:patch Hunk #1 FAILED at 85. :info:patch Hunk #2 FAILED at 357. :info:patch Hunk #3 succeeded at 393 with fuzz 1 (offset 3 lines). :info:patch 2 out of 3 hunks FAILED -- saving rejects to file Makefile.in.rej :info:patch patching file mbox.c :info:patch Hunk #2 succeeded at 252 (offset -4 lines). :info:patch patching file menu.c :info:patch Hunk #10 succeeded at 877 (offset -1 lines). :info:patch patching file mutt_curses.h :info:patch patching file mutt.h :info:patch Hunk #1 succeeded at 419 (offset 1 line). :info:patch Hunk #2 succeeded at 861 (offset 5 lines). :info:patch Hunk #3 succeeded at 896 (offset 5 lines). :info:patch patching file muttlib.c :info:patch Hunk #1 succeeded at 1286 (offset 54 lines). :info:patch Hunk #2 succeeded at 1331 (offset 55 lines). :info:patch patching file mx.c :info:patch Hunk #1 succeeded at 580 (offset -1 lines). :info:patch Hunk #2 succeeded at 603 (offset -1 lines). :info:patch Hunk #3 succeeded at 704 with fuzz 2 (offset -1 lines). :info:patch patching file OPS :info:patch Hunk #1 succeeded at 179 (offset 1 line). :info:patch patching file pager.c :info:patch Hunk #2 FAILED at 1072. :info:patch Hunk #3 succeeded at 1748 (offset 28 lines). :info:patch Hunk #4 succeeded at 1761 (offset 28 lines). :info:patch Hunk #5 succeeded at 1775 (offset 28 lines). :info:patch Hunk #6 succeeded at 1799 (offset 28 lines). :info:patch Hunk #7 succeeded at 1824 (offset 28 lines). :info:patch Hunk #8 succeeded at 2766 (offset 27 lines). :info:patch 1 out of 8 hunks FAILED -- saving rejects to file pager.c.rej :info:patch patching file PATCHES :info:patch patching file sidebar.c :info:patch patching file sidebar.h :info:patch patching file doc/Muttrc :info:patch patching file imap/imap.c :info:patch patching file imap/command.c :info:patch Hunk #1 succeeded at 1011 (offset 2 lines). :info:patch shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/work/mutt-1.5.21" && /usr/bin/patch -p0 -p1 < '/opt/local/var/macports/distfiles/mutt- devel/patch-1.5.20.sidebar.20090619.txt'" returned error 1 :error:patch Target org.macports.patch returned: shell command failed (see log for details) :debug:patch Backtrace: shell command failed (see log for details) while executing "command_exec patch "" "< '$patch'"" (procedure "portpatch::patch_main" line 35) invoked from within "$procedure $targetname" :info:patch Warning: the following items did not execute (for mutt-devel): org.macports.activate org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:patch Log for mutt-devel is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_mail_mutt-devel/main.log }}} -- Comment: Please remember to preview and use WikiFormatting. -- Ticket URL: <https://trac.macports.org/ticket/28534#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS