#26797: curl: curl-config differs -------------------------------------+-------------------------------------- Reporter: keith.crist@… | Owner: ryandesign@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: curl -------------------------------------+-------------------------------------- Comment(by keith.crist@…): I do not need to build universal. The two files are attached. The command was Install htop, macports did the rest. I am new to macports, please let me know the command to build Intel only. Thanks, Keith -- Ticket URL: <https://trac.macports.org/ticket/26797#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS

#26797: curl: curl-config differs -------------------------------------+-------------------------------------- Reporter: keith.crist@… | Owner: ryandesign@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: curl -------------------------------------+-------------------------------------- Comment(by ryandesign@…): Replying to [comment:2 keith.crist@…]:

I do not need to build universal. The two files are attached. The command was Install htop, macports did the rest. I am new to macports, please let me know the command to build Intel only.

The files are identical except that the PowerPC version contains "'--host =powerpc-apple-darwin9.8.0' 'host_alias=powerpc-apple-darwin9.8.0'" which makes this report a duplicate of #24001. The command to build curl for Intel only is: {{{ sudo port clean curl sudo port install curl }}} To build universal, you would have had to ask for the universal variant with "sudo port install curl +universal", or have put "+universal" in your variants.conf. MacPorts base also sometimes rebuilds dependencies universal if it believes that will help, but that should really only apply if your build_arch is 64-bit (e.g. x86_64) and you are building a port that requires 32-bit (e.g. i386), and this is only the case by default, so you should not have run into it on Leopard, unless you have changed your build_arch. Replying to [comment:3 keith.crist@…]:

I did edit macports.conf universal_archs i386 x86_64

If you change universal_archs, you pretty much need to manually rebuild any existing ports you've installed universal. Really it's best not to change universal_archs once you've installed any ports.

Is it OK to just remove /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work and start over?

Yes, and to do so, you would run "sudo port clean curl". -- Ticket URL: <https://trac.macports.org/ticket/26797#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS

#26797: curl: curl-config differs -------------------------------------+-------------------------------------- Reporter: keith.crist@… | Owner: ryandesign@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: curl -------------------------------------+-------------------------------------- Comment(by keith.crist@…): Replying to [comment:5 ryandesign@…]:

Replying to [comment:4 ryandesign@…]:

...

and this is only the case by default That should read "and this is only the case by default ''on Snow Leopard''"

universal i386 ppc must be the default. After cleaned out the work folder and pkgconfig I tried to reinstall: Mac88311ELYP4-2:~ kcrist$ sudo port install curl ---> Computing dependencies for curl ---> Dependencies to be installed: pkgconfig ---> Fetching pkgconfig ---> Verifying checksum(s) for pkgconfig ---> Extracting pkgconfig ---> Applying patches to pkgconfig ---> Configuring pkgconfig ---> Building pkgconfig ---> Staging pkgconfig into destroot ---> Installing pkgconfig @0.25_1+universal ---> Activating pkgconfig @0.25_1+universal ---> Cleaning pkgconfig ---> Fetching curl ---> Verifying checksum(s) for curl ---> Extracting curl ---> Configuring curl ---> Building curl ---> Staging curl into destroot Error: Target org.macports.destroot returned: /opt/local/bin/curl-config differs in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-powerpc and /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-intel and cannot be merged Log for curl is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/main.log Error: Status 1 encountered during processing. Anyway all is good, I uninstalled the problem ports and rebuilt with -universal. htop installed without errors. Thank you for your help and instructions. Keith -- Ticket URL: <https://trac.macports.org/ticket/26797#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS

#26797: curl: curl-config differs --------------------------------------+------------------------------------- Reporter: keith.crist@… | Owner: ryandesign@… Type: defect | Status: reopened Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Resolution: | Keywords: Port: curl | --------------------------------------+------------------------------------- Changes (by christian.groon@…): * status: closed => reopened * resolution: duplicate => Comment: After looking over the comments above, I'm still confused as to how to fix the curl-config differs error. Previous ports were building universal as below; ---> Fetching curl-ca-bundle ---> Attempting to fetch curl-7.21.2.tar.bz2 from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/curl ---> Attempting to fetch certdata-1.70.txt from http://ykf.ca.distfiles.macports.org/MacPorts/mpdistfiles/curl ---> Verifying checksum(s) for curl-ca-bundle ---> Extracting curl-ca-bundle ---> Applying patches to curl-ca-bundle ---> Configuring curl-ca-bundle ---> Building curl-ca-bundle ---> Staging curl-ca-bundle into destroot ---> Installing curl-ca-bundle @7.21.2_4 ---> Activating curl-ca-bundle @7.21.2_4 ---> Cleaning curl-ca-bundle ---> Fetching libidn ---> Attempting to fetch libidn-1.19.tar.gz from http://mirrors.ibiblio.org/pub/mirrors/gnu/ftp/gnu/libidn ---> Verifying checksum(s) for libidn ---> Extracting libidn ---> Configuring libidn ---> Building libidn ---> Staging libidn into destroot ---> Installing libidn @1.19_0+universal ---> Activating libidn @1.19_0+universal ---> Cleaning libidn ---> Fetching curl ---> Verifying checksum(s) for curl ---> Extracting curl ---> Applying patches to curl ---> Configuring curl ---> Building curl ---> Staging curl into destroot Error: Target org.macports.destroot returned: /opt/local/bin/curl-config differs in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-powerpc and /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-intel and cannot be merged But then clearly the curl port had the powerpc/intel difference. I then tried to clean the curl port and build just for intel (with and without the "+universal" but got exactly the same error. christian-groons-macbook:~ LeGrand$ sudo port clean curl Password: ---> Cleaning curl christian-groons-macbook:~ LeGrand$ sudo port install curl +universal ---> Computing dependencies for curl ---> Fetching curl ---> Verifying checksum(s) for curl ---> Extracting curl ---> Applying patches to curl ---> Configuring curl ---> Building curl ---> Staging curl into destroot Error: Target org.macports.destroot returned: /opt/local/bin/curl-config differs in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-powerpc and /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-intel and cannot be merged Log for curl is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/main.log So how can this difference be resolved? I'm running Mac OS X 10.5.8 (9L30). Replying to [comment:7 ryandesign@…]:

Replying to [comment:6 keith.crist@…]:

...

universal i386 ppc must be the default.

i386 ppc is the default for universal builds on Leopard and earlier.

It is not the default to build universal; you have to request it by typing "+universal" on the command line or putting it in variants.conf.

...

Error: Target org.macports.destroot returned: /opt/local/bin/curl- config differs in /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-powerpc and /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/work /destroot-intel and cannot be merged [[br]] Log for curl is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_net_curl/main.log

If you're building universal for i386 ppc then this is #24001.

-- Ticket URL: <https://trac.macports.org/ticket/26797#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS