[MacPorts] #28592: qt4-x11 install bomb
#28592: qt4-x11 install bomb --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: --------------------------------+------------------------------------------- Guys, I am experiencing a problem installing qt4-x11 with the most recent version of MacPorts: {{{ bash-3.2$ sudo port version Version: 1.9.2 }}} on MacOSX 10.5.8 running XCode 3.1.2. I had performed a recent reinstall of MacPorts using these instructions: [http://guide.macports.org/#installing.macports.uninstalling] And then built from the binary .dmg: [http://guide.macports.org/#installing.macports.binary] After I did the reinstall, I installed my preferred set of packages. I wanted to install qjackctl, which depended on qt gui toolkit. The install bombs on the build of qt4-x11. So I focused my attention on that package. Procedurally, I first performed a plain old, install: {{{ bash-3.2$ sudo port install qt4-x11 }}} Based on some other posts of similar issues, I tried this: {{{ bash-3.2$ sudo port clean qt4-x11 ---> Cleaning qt4-x11 bash-3.2$ sudo port uninstall qt4-x11 bash-3.2$ sudo port -fR upgrade openssl bash-3.2$ sudo port install qt4-x11 }}} Both ended up the same way: {{{ :info:build /usr/bin/g++-4.0 -c -pipe -O2 -arch i386 -isystem/opt/local/include -I/opt/local/include/mysql5/mysql -I/opt/local/include/postgresql83 -I/opt/local/include/gstreamer-0.10 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include/libxml2 -O2 -fvisibility=hidden -fvisibility-inlines- hidden -Wall -W -fPIC -DQT_SHARED -D__USE_WS_X11__ -DQT_BUILD_NETWORK_LIB -DQT_NO_USING_NAMESPACE -DQT_NO_CAST_TO_ASCII -DQT_ASCII_CAST_WARNINGS -DQT3_SUPPORT -DQT_MOC_COMPAT -DQT_NO_DEBUG -DQT_CORE_LIB -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -I../../mkspecs/darwin-g++ -I. -I../../include/QtCore -I../../include/QtCore -I../../include -I../../include/QtNetwork -I.rcc/release-shared -Ikernel -I/usr/include -I.moc/release-shared -I.uic/release-shared -o .obj/release- shared/qsslconfiguration.o ssl/qsslconfiguration.cpp :info:build ssl/qsslsocket_openssl_symbols_p.h:264: error: variable or field 'q_sk_free' declared void :info:build ssl/qsslsocket_openssl_symbols_p.h:264: error: 'STACK' was not declared in this scope :info:build ssl/qsslsocket_openssl_symbols_p.h:264: error: 'a' was not declared in this scope :info:build ssl/qsslsocket_openssl_symbols_p.h:265: error: 'STACK' was not declared in this scope :info:build ssl/qsslsocket_openssl_symbols_p.h:265: error: 'a' was not declared in this scope :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: 'STACK' was not declared in this scope :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: 'a' was not declared in this scope :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: expected primary-expression before 'int' :info:build ssl/qsslsocket_openssl_symbols_p.h:266: error: initializer expression list treated as compound expression :info:build ssl/qsslcertificate.cpp: In member function 'QMultiMap<QSsl::AlternateNameEntryType, QString> QSslCertificate::alternateSubjectNames() const': :info:build ssl/qsslcertificate.cpp:372: error: 'STACK' was not declared in this scope :info:build ssl/qsslcertificate.cpp:372: error: 'altNames' was not declared in this scope :info:build ssl/qsslcertificate.cpp:372: error: expected primary- expression before ')' token :info:build ssl/qsslcertificate.cpp:372: error: expected `;' before 'q_X509_get_ext_d2i' :info:build ssl/qsslcertificate.cpp:393: error: 'q_sk_free' cannot be used as a function :info:build make[1]: *** [.obj/release-shared/qsslcertificate.o] Error 1 :info:build make[1]: *** Waiting for unfinished jobs.... :info:build make: *** [sub-network-make_default-ordered] Error 2 :info:build shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_qt4-x11/work/qt-x11 -opensource-src-4.4.3" && /usr/bin/make -j2 first " returned error 2 :error:build Target org.macports.build returned: shell command failed (see log for details) :debug:build Backtrace: shell command failed (see log for details) while executing "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: the following items did not execute (for qt4-x11): org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Log for qt4-x11 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_ports_x11_qt4-x11/main.log }}} I'm using the most recent version of openssl: {{{ mac:~ newuser$ sudo port installed | grep openssl Password: openssl @0.9.8k_0 openssl @1.0.0a_0 openssl @1.0.0d_0 (active) }}} The other versions of openssl are in the list because I tried various combinations of older versions of qt4-x11 and openssl. To no avail, of course. Does anyone have any ideas? Is it necessary that openssl be used for qt4-x11? Can I just disable it from the configure process of qt4-x11? thanks, scott -- Ticket URL: <https://trac.macports.org/ticket/28592> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 install bomb --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Changes (by ryandesign@…): * cc: michaelld@…, devans@…, ryandesign@… (added) * port: => qt4-x11, qt4-mac, qjackctl Comment: qt4-x11 is totally obsolete; I don't know why the port still exists (Michael?) or why qjackctl is using it (Dave?). The qt4-mac port is what should be being used... -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 install bomb --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by frases@…): FYI: {{{ mac:local newuser$ sudo port deps qjackctl Full Name: qjackctl @0.3.4_0 Library Dependencies: jack, qt4-x11, xorg-libX11, xorg-libXext }}} -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 install bomb --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by michaelld@…): I started working on "qt4-mac +x11"; never found a working combination of QMake build files' tweaks. I became burdened down with other tasks, and haven't gotten back to it (yet). With the release of 4.7.2, maybe I'll give it another go ... -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 install bomb --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by ryandesign@…): I thought the idea was that ports that use qt4-mac shouldn't care whether they use Aqua/Quartz or X11, therefore it became a single port with an +x11 variant. Could qjackctl use qt4-mac? -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 build failure in ssl/qsslsocket_openssl_symbols_p.h --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by jmr@…): Please use a summary that describes the actual problem. -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 build failure in ssl/qsslsocket_openssl_symbols_p.h --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by michaelld@…): I'm playing with qjackctl right now; looks like it'll work with whatever recent Qt4 is installed. I'll update qjackctl to use qt4-mac instead of qt4-x11 & that should solve this issue for now. -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 build failure in ssl/qsslsocket_openssl_symbols_p.h --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by michaelld@…): Done in r76645. Please do a selfupdate & try installing qjackctl again. If that works, then IMHO we can close this ticket since there's already (at least) another ticket open on qt4-x11 not compiling / needing upgrade / etc ... -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 build failure in ssl/qsslsocket_openssl_symbols_p.h --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by frases@…): Mike, After a clean: {{{ mac:Documents newuser$ sudo port clean qjackctl ---> Cleaning qjackctl }}} The compile seems to have worked: {{{ mac:Documents newuser$ sudo port install qjackctl ---> Computing dependencies for qjackctl ---> Fetching qjackctl ---> Verifying checksum(s) for qjackctl ---> Extracting qjackctl ---> Applying patches to qjackctl ---> Configuring qjackctl ---> Building qjackctl ---> Staging qjackctl into destroot ---> Installing qjackctl @0.3.7_0+dbus+portaudio ---> Activating qjackctl @0.3.7_0+dbus+portaudio ---> Cleaning qjackctl }}} However, there was no executable created in /opt/local/bin: {{{ mac:Documents newuser$ qjackctl -bash: qjackctl: command not found mac:Documents newuser$ echo $PATH /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/opt/local/bin }}} {{{ mac:Documents newuser$ sudo port installed | grep qjack qjackctl @0.3.7_0+dbus+portaudio (active) }}} Doing a find, I see that an executable was created here: {{{ /local/var/macports/software/qjackctl/0.3.7_0+dbus+portaudio/Applications/MacPorts/qjackctl.app/Contents/MacOS/qjackctl }}} I started the executable in this directory and it seems to work, but I'm not sure why the file got plopped here and not in /opt/local/bin. scott -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:8> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 build failure in ssl/qsslsocket_openssl_symbols_p.h --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by frases@…): For completeness, I should say that before the "clean" above, I did a selfupdate and "port upgrade outdated": {{{ mac:Documents newuser$ sudo port selfupdate Password: ---> Updating the ports tree ---> Updating MacPorts base sources using rsync MacPorts base version 1.9.2 installed, MacPorts base version 1.9.2 downloaded. ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated mac:Documents newuser$ sudo port upgrade outdated ---> Fetching ncursesw .. }}} thanks for the work on this, Mike. scott -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 build failure in ssl/qsslsocket_openssl_symbols_p.h --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by michaelld@…): In r76657, I add a link from ${prefix}/bin/qjackctl -> ${applications_dir}/qjackctl.app/Contents/MacOS/qjackctl .. do a 'sync' and then update qjackctl for this change. Works for me; hopefully will for you too ;) -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:10> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qt4-x11 build failure in ssl/qsslsocket_openssl_symbols_p.h --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by frases@…): Right on, Mike..looks good! {{{ mac:~ newuser$ sudo port sync Password: mac:~ newuser$ sudo port selfupdate ---> Updating the ports tree ---> Updating MacPorts base sources using rsync MacPorts base version 1.9.2 installed, MacPorts base version 1.9.2 downloaded. ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated mac:~ newuser$ sudo port upgrade outdated ---> Computing dependencies for qjackctl ---> Fetching qjackctl ---> Verifying checksum(s) for qjackctl ---> Extracting qjackctl ---> Applying patches to qjackctl ---> Configuring qjackctl ---> Building qjackctl ---> Staging qjackctl into destroot ---> Computing dependencies for qjackctl ---> Installing qjackctl @0.3.7_1+dbus+portaudio ---> Deactivating qjackctl @0.3.7_0+dbus+portaudio ---> Cleaning qjackctl ---> Activating qjackctl @0.3.7_1+dbus+portaudio ---> Cleaning qjackctl mac:~ newuser$ which qjackctl /opt/local/bin/qjackctl }}} Thanks for the help! I think we can close this out. scott -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:11> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qjackctl relies on qt4-x11, which doesn't build --------------------------------+------------------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Keywords: | Port: qt4-x11, qt4-mac, qjackctl --------------------------------+------------------------------------------- Comment(by michaelld@…): You're welcome; thanks for the quick feedback! -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:12> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qjackctl relies on qt4-x11, which doesn't build -----------------------------------------+---------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Resolution: fixed | Keywords: Port: qt4-x11, qt4-mac, qjackctl | -----------------------------------------+---------------------------------- Changes (by michaelld@…): * status: new => closed * resolution: => fixed -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:13> MacPorts <http://www.macports.org/> Ports system for Mac OS
#28592: qjackctl relies on qt4-x11, which doesn't build -----------------------------------------+---------------------------------- Reporter: frases@… | Owner: macports-tickets@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.9.2 Resolution: fixed | Keywords: Port: qt4-x11, qt4-mac, qjackctl | -----------------------------------------+---------------------------------- Comment(by frases@…): No prob..thanks for fixing! -- Ticket URL: <https://trac.macports.org/ticket/28592#comment:14> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts