[MacPorts] #16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met:
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: ------------------------------------+--------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Keywords: | Port: ------------------------------------+--------------------------------------- checking for PYGOBJECT... configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: No package 'pygobject-2.0' found Had another issue wil gail like this. installing rb-gnome. Thanks -- Ticket URL: <http://trac.macports.org/ticket/16872> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by rsopublic@magmatic.com): Ok, now I know I have py-gobject @2.14.1_0+darwin_9 (active) So after activating and deactivating I get this XXXX$ sudo port install rb-gnome Password: ---> Configuring py25-gtk Error: Target org.macports.configure returned: configure failure: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-gtk/work/pygtk-2.12.1" && ./configure --prefix=/opt/local --disable-glibtest " returned error 1 Command output: checking dynamic linker characteristics... darwin9.5.0 dyld checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no configure: creating libtool checking whether /opt/local/bin/python2.5 version >= 2.3.5... yes checking for /opt/local/bin/python2.5 version... 2.5 checking for /opt/local/bin/python2.5 platform... darwin checking for /opt/local/bin/python2.5 script directory... ${prefix}/lib/python2.5/site-packages checking for /opt/local/bin/python2.5 extension module directory... ${exec_prefix}/lib/python2.5/site-packages checking for headers required to compile python extensions... found checking for PySignal_SetWakeupFd in Python.h... no checking for python module thread... yes checking whether to enable threading in pygtk... yes checking for pkg-config... /opt/local/bin/pkg-config checking pkg-config is at least version 0.16... yes checking for GLIB - version >= 2.8.0... yes (version 2.18.1) checking for PYGOBJECT... configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: No package 'pygobject-2.0' found Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables PYGOBJECT_CFLAGS and PYGOBJECT_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details. Error: The following dependencies failed to build: gnome-session gnome- control-center gnome-desktop py25-gnome py25-gtk py25-orbit startup- notification gnome-menus gnome-panel libgweather libwnck gnome-settings- daemon gst-plugins-good aalib flac id3lib libogg gst-plugins-base cdparanoia gstreamer bison m4 flex gzip liboil libtheora libvorbis libcaca libcdio libcddb libdv libshout2 speex taglib wavpack libgnomekbd libxklavier metacity nautilus eel libexif libgnomeprintui libgnomeprint libgnomecups libgtkhtml ruby Error: Status 1 encountered during processing. soconnells-Computer-17:bin soconnell$ sudo port installed pygtk Password: None of the specified ports are installed. soconnells-Computer-17:bin soconnell$ sudo port installed py-gtk None of the specified ports are installed. soconnells-Computer-17:bin soconnell$ sudo port installed pyGTK+ None of the specified ports are installed. soconnells-Computer-17:bin soconnell$ sudo port installed gtk+ None of the specified ports are installed. soconnells-Computer-17:bin soconnell$ sudo port installed gtk None of the specified ports are installed. soconnells-Computer-17:bin soconnell$ sudo port install gtk Error: Port gtk not found soconnells-Computer-17:bin soconnell$ sudo port install pygtk Error: Port pygtk not found soconnells-Computer-17:bin soconnell$ sudo port install py-gtk Error: Port py-gtk not found soconnells-Computer-17:bin soconnell$ sudo port installed py-gtk2 The following ports are currently installed: py-gtk2 @2.12.1_0+darwin_9 (active) soconnells-Computer-17:bin soconnell$ sudo port installed py-gobject The following ports are currently installed: py-gobject @2.14.1_0+darwin_9 soconnells-Computer-17:bin soconnell$ sudo port activate py-gobject ---> Activating py-gobject soconnells-Computer-17:bin soconnell$ sudo port install rb-gnome ---> Configuring py25-gtk ---> Building py25-gtk with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-gtk/work/pygtk-2.12.1" && make all " returned error 2 Command output: Warning: Constructor for PangoLayout needs to be updated to new API See http://live.gnome.org/PyGTK_2fWhatsNew28#update-constructors ***INFO*** The coverage of global functions is 83.67% (41/49) ***INFO*** The coverage of methods is 94.74% (180/190) ***INFO*** The coverage of virtual proxies is 58.62% (17/29) ***INFO*** The coverage of virtual accessors is 68.97% (20/29) ***INFO*** There are no declared interface proxies. if /bin/sh ./libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -O2 -Wall -fno- strict-aliasing -std=c9x -MT pango_la-pango.lo -MD -MP -MF ".deps /pango_la-pango.Tpo" -c -o pango_la-pango.lo `test -f 'pango.c' || echo './'`pango.c; \ then mv -f ".deps/pango_la-pango.Tpo" ".deps/pango_la-pango.Plo"; else rm -f ".deps/pango_la-pango.Tpo"; exit 1; fi /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -O2 -Wall -fno- strict-aliasing -std=c9x -MT pango_la-pango.lo -MD -MP -MF .deps/pango_la- pango.Tpo -c pango.c -fno-common -DPIC -o .libs/pango_la-pango.o /bin/sh ./libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -O2 -Wall -fno- strict-aliasing -std=c9x -L/opt/local/lib -o pango.la -rpath /opt/local/lib/python2.5/site-packages/gtk-2.0 -module -avoid-version pango_la-pangomodule.lo pango_la-pango.lo -L/opt/local/lib -lpango-1.0 -lm -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl -liconv /usr/bin/gcc-4.0 ${wl}-flat_namespace ${wl}-undefined ${wl}suppress -o .libs/pango.so -bundle .libs/pango_la-pangomodule.o .libs/pango_la- pango.o -L/opt/local/lib /opt/local/lib/libpango-1.0.dylib -lm /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib creating pango.la (cd .libs && rm -f pango.la && ln -s ../pango.la pango.la) Making all in gtk if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" -c -o gtkunixprint_la- gtkunixprintmodule.lo `test -f 'gtkunixprintmodule.c' || echo './'`gtkunixprintmodule.c; \ then mv -f ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" ".deps /gtkunixprint_la-gtkunixprintmodule.Plo"; else rm -f ".deps /gtkunixprint_la-gtkunixprintmodule.Tpo"; exit 1; fi mkdir .libs /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF .deps/gtkunixprint_la-gtkunixprintmodule.Tpo -c gtkunixprintmodule.c -fno-common -DPIC -o .libs/gtkunixprint_la-gtkunixprintmodule.o gtkunixprintmodule.c:35:22: error: pycairo.h: No such file or directory gtkunixprintmodule.c:36: error: syntax error before '*' token gtkunixprintmodule.c:36: warning: type defaults to 'int' in declaration of 'Pycairo_CAPI' gtkunixprintmodule.c:36: warning: data definition has no type or storage class gtkunixprintmodule.c: In function 'initgtkunixprint': gtkunixprintmodule.c:51: error: 'Pycairo_IMPORT' undeclared (first use in this function) gtkunixprintmodule.c:51: error: (Each undeclared identifier is reported only once gtkunixprintmodule.c:51: error: for each function it appears in.) make[2]: *** [gtkunixprint_la-gtkunixprintmodule.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: The following dependencies failed to build: gnome-session gnome- control-center gnome-desktop py25-gnome py25-gtk py25-orbit startup- notification gnome-menus gnome-panel libgweather libwnck gnome-settings- daemon gst-plugins-good aalib flac id3lib libogg gst-plugins-base cdparanoia gstreamer bison m4 flex gzip liboil libtheora libvorbis libcaca libcdio libcddb libdv libshout2 speex taglib wavpack libgnomekbd libxklavier metacity nautilus eel libexif libgnomeprintui libgnomeprint libgnomecups libgtkhtml ruby Error: Status 1 encountered during processing. soconnells-Computer-17:bin soconnell$ sudo port installed py-gobject The following ports are currently installed: py-gobject @2.14.1_0+darwin_9 (active) soconnells-Computer-17:bin soconnell$ sudo port install rb-gnome ---> Building py25-gtk with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-gtk/work/pygtk-2.12.1" && make all " returned error 2 Command output: make all-recursive Making all in codegen make[2]: Nothing to be done for `all'. Making all in . make[2]: Nothing to be done for `all-am'. Making all in gtk if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" -c -o gtkunixprint_la- gtkunixprintmodule.lo `test -f 'gtkunixprintmodule.c' || echo './'`gtkunixprintmodule.c; \ then mv -f ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" ".deps /gtkunixprint_la-gtkunixprintmodule.Plo"; else rm -f ".deps /gtkunixprint_la-gtkunixprintmodule.Tpo"; exit 1; fi /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF .deps/gtkunixprint_la-gtkunixprintmodule.Tpo -c gtkunixprintmodule.c -fno-common -DPIC -o .libs/gtkunixprint_la-gtkunixprintmodule.o gtkunixprintmodule.c:35:22: error: pycairo.h: No such file or directory gtkunixprintmodule.c:36: error: syntax error before '*' token gtkunixprintmodule.c:36: warning: type defaults to 'int' in declaration of 'Pycairo_CAPI' gtkunixprintmodule.c:36: warning: data definition has no type or storage class gtkunixprintmodule.c: In function 'initgtkunixprint': gtkunixprintmodule.c:51: error: 'Pycairo_IMPORT' undeclared (first use in this function) gtkunixprintmodule.c:51: error: (Each undeclared identifier is reported only once gtkunixprintmodule.c:51: error: for each function it appears in.) make[2]: *** [gtkunixprint_la-gtkunixprintmodule.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: The following dependencies failed to build: gnome-session gnome- control-center gnome-desktop py25-gnome py25-gtk py25-orbit startup- notification gnome-menus gnome-panel libgweather libwnck gnome-settings- daemon gst-plugins-good aalib flac id3lib libogg gst-plugins-base cdparanoia gstreamer bison m4 flex gzip liboil libtheora libvorbis libcaca libcdio libcddb libdv libshout2 speex taglib wavpack libgnomekbd libxklavier metacity nautilus eel libexif libgnomeprintui libgnomeprint libgnomecups libgtkhtml ruby Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by blb@macports.org): Watch your python versions, some things are py- (which is python24) and some py25- (python25); py25-gtk should need py25-gobject, but it is listed as a dependency of py25-gtk. Is py25-gtk your eventual desire for a port, or something which requires it? -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by rsopublic@magmatic.com): Ok, then how about this. At this point how can I reset since it seems that the rb-gnome install has loaded lib that may not be correct. I will update all again but.... here is the latest error after with py25-gtk sudo port install py25-gtk ---> Building py25-gtk with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-gtk/work/pygtk-2.12.1" && make all " returned error 2 Command output: make all-recursive Making all in codegen make[2]: Nothing to be done for `all'. Making all in . if /bin/sh ./libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -I/opt/local/include/atk-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -O2 -Wall -fno- strict-aliasing -std=c9x -MT atk_la-atkmodule.lo -MD -MP -MF ".deps /atk_la-atkmodule.Tpo" -c -o atk_la-atkmodule.lo `test -f 'atkmodule.c' || echo './'`atkmodule.c; \ then mv -f ".deps/atk_la-atkmodule.Tpo" ".deps/atk_la- atkmodule.Plo"; else rm -f ".deps/atk_la-atkmodule.Tpo"; exit 1; fi /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -D_REENTRANT -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -I/opt/local/include/atk-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -O2 -Wall -fno- strict-aliasing -std=c9x -MT atk_la-atkmodule.lo -MD -MP -MF .deps/atk_la- atkmodule.Tpo -c atkmodule.c -fno-common -DPIC -o .libs/atk_la- atkmodule.o /bin/sh ./libtool --tag=CC --mode=link /usr/bin/gcc-4.0 -O2 -Wall -fno- strict-aliasing -std=c9x -L/opt/local/lib -o atk.la -rpath /opt/local/lib/python2.5/site-packages/gtk-2.0 -module -avoid-version atk_la-atkmodule.lo atk_la-atk.lo -L/opt/local/lib -latk-1.0 -lgobject-2.0 -lgmodule-2.0 -lglib-2.0 -lintl -liconv rm -fr .libs/atk.la .libs/atk.lai .libs/atk.so /usr/bin/gcc-4.0 ${wl}-flat_namespace ${wl}-undefined ${wl}suppress -o .libs/atk.so -bundle .libs/atk_la-atkmodule.o .libs/atk_la-atk.o -L/opt/local/lib /opt/local/lib/libatk-1.0.dylib /opt/local/lib/libgobject-2.0.dylib /opt/local/lib/libgmodule-2.0.dylib /opt/local/lib/libglib-2.0.dylib /opt/local/lib/libintl.dylib /opt/local/lib/libiconv.dylib creating atk.la (cd .libs && rm -f atk.la && ln -s ../atk.la atk.la) Making all in gtk if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" -c -o gtkunixprint_la- gtkunixprintmodule.lo `test -f 'gtkunixprintmodule.c' || echo './'`gtkunixprintmodule.c; \ then mv -f ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" ".deps /gtkunixprint_la-gtkunixprintmodule.Plo"; else rm -f ".deps /gtkunixprint_la-gtkunixprintmodule.Tpo"; exit 1; fi /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF .deps/gtkunixprint_la-gtkunixprintmodule.Tpo -c gtkunixprintmodule.c -fno-common -DPIC -o .libs/gtkunixprint_la-gtkunixprintmodule.o gtkunixprintmodule.c:35:22: error: pycairo.h: No such file or directory gtkunixprintmodule.c:36: error: syntax error before '*' token gtkunixprintmodule.c:36: warning: type defaults to 'int' in declaration of 'Pycairo_CAPI' gtkunixprintmodule.c:36: warning: data definition has no type or storage class gtkunixprintmodule.c: In function 'initgtkunixprint': gtkunixprintmodule.c:51: error: 'Pycairo_IMPORT' undeclared (first use in this function) gtkunixprintmodule.c:51: error: (Each undeclared identifier is reported only once gtkunixprintmodule.c:51: error: for each function it appears in.) make[2]: *** [gtkunixprint_la-gtkunixprintmodule.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by rsopublic@magmatic.com): During the upgrade ---> Configuring py-numpy ---> Building py-numpy with target build Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_python_py-numpy/work/numpy-1.1.1" && /opt/local/bin/python2.4 setup.py build " returned error 1 Command output: Running from numpy source directory. non-existing path in 'numpy/distutils': 'site.cfg' F2PY Version 2_5585 blas_opt_info: FOUND: extra_link_args = ['-Wl,-framework', '-Wl,Accelerate'] define_macros = [('NO_ATLAS_INFO', 3)] extra_compile_args = ['-msse3', '-I/System/Library/Frameworks/vecLib.framework/Headers'] lapack_opt_info: FOUND: extra_link_args = ['-Wl,-framework', '-Wl,Accelerate'] define_macros = [('NO_ATLAS_INFO', 3)] extra_compile_args = ['-msse3'] running build running scons customize UnixCCompiler Could not locate executable -fno-strict-aliasing error: Could not find compiler executable info for scons Error: Unable to upgrade port: 1 -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by rsopublic@magmatic.com): py-numpy upgraded... -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by rsopublic@magmatic.com): py25 i have The following ports are currently installed: py25-cairo @1.4.12_2+darwin_9 (active) py25-gobject @2.14.2_0+darwin_9 (active) py25-hashlib @2.5.2_0 (active) py25-libxml2 @2.6.21_1 (active) py25-nose @0.10.3_1 (active) py25-numeric @24.2_1+macosx (active) py25-numpy @1.2.0_0 (active) py25-setuptools @0.6c8_2 (active) py25-zlib @2.5.2_0 (active) -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by blb@macports.org): The error {{{ Could not locate executable -fno-strict-aliasing }}} is caused by the Tcl env bug, ticket #13930, so a clean of the failing port then building again should get you past that. The error for py25-gtk, though, is interesting: {{{ /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF .deps/gtkunixprint_la-gtkunixprintmodule.Tpo -c gtkunixprintmodule.c -fno- common -DPIC -o .libs/gtkunixprint_la-gtkunixprintmodule.o gtkunixprintmodule.c:35:22: error: pycairo.h: No such file or directory }}} pycairo.h should be provided by py25-cairo, which you show as installed & active; to make sure, does /opt/local/include/pycairo/pycairo.h exist? If so, then it sounds like py25-gtk is not picking up the information needed to see it, since the gcc line doesn't show that directory in any of the {{{-I}}} flags. -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by rsopublic@magmatic.com): touch any update?? I deactivated and then reinstalled, removed older versions sudo port install py25-gtk ---> Building py25-gtk with target all Error: Target org.macports.build returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_python_py25-gtk/work/pygtk-2.12.1" && make all " returned error 2 Command output: make all-recursive Making all in codegen make[2]: Nothing to be done for `all'. Making all in . make[2]: Nothing to be done for `all-am'. Making all in gtk if /bin/sh ../libtool --tag=CC --mode=compile /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" -c -o gtkunixprint_la- gtkunixprintmodule.lo `test -f 'gtkunixprintmodule.c' || echo './'`gtkunixprintmodule.c; \ then mv -f ".deps/gtkunixprint_la-gtkunixprintmodule.Tpo" ".deps /gtkunixprint_la-gtkunixprintmodule.Plo"; else rm -f ".deps /gtkunixprint_la-gtkunixprintmodule.Tpo"; exit 1; fi /usr/bin/gcc-4.0 -DHAVE_CONFIG_H -I. -I. -I.. -I/opt/local/Library/Frameworks/Python.framework/Versions/2.5/include/python2.5 -I/opt/local/include/pygtk-2.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I./gtk -I/opt/local/include -DXTHREADS -I/opt/local/include/gtk-unix-print-2.0 -I/opt/local/include/gtk-2.0 -I/opt/local/include/atk-1.0 -I/opt/local/include/cairo -I/opt/local/lib/gtk-2.0/include -I/opt/local/include/pango-1.0 -I/opt/local/include/glib-2.0 -I/opt/local/lib/glib-2.0/include -I/opt/local/include -I/opt/local/include/pixman-1 -I/opt/local/include/freetype2 -I/opt/local/include/libpng12 -I/usr/X11/include -O2 -Wall -fno-strict- aliasing -std=c9x -MT gtkunixprint_la-gtkunixprintmodule.lo -MD -MP -MF .deps/gtkunixprint_la-gtkunixprintmodule.Tpo -c gtkunixprintmodule.c -fno-common -DPIC -o .libs/gtkunixprint_la-gtkunixprintmodule.o gtkunixprintmodule.c:35:22: error: pycairo.h: No such file or directory gtkunixprintmodule.c:36: error: syntax error before '*' token gtkunixprintmodule.c:36: warning: type defaults to 'int' in declaration of 'Pycairo_CAPI' gtkunixprintmodule.c:36: warning: data definition has no type or storage class gtkunixprintmodule.c: In function 'initgtkunixprint': gtkunixprintmodule.c:51: error: 'Pycairo_IMPORT' undeclared (first use in this function) gtkunixprintmodule.c:51: error: (Each undeclared identifier is reported only once gtkunixprintmodule.c:51: error: for each function it appears in.) make[2]: *** [gtkunixprint_la-gtkunixprintmodule.lo] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:8> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@magmatic.com | Owner: macports-tickets@lists.macosforge.org Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.6.0 Resolution: | Keywords: Port: | -------------------------------------+-------------------------------------- Comment(by rsopublic@magmatic.com): Any update, seems like all of the ruby-gnome want py-**** not py25-**** thanks -- Ticket URL: <http://trac.macports.org/ticket/16872#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: ------------------------------------+--------------------------------------- Reporter: rsopublic@… | Owner: kimuraw@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Keywords: | Port: rb-gnome ------------------------------------+--------------------------------------- Changes (by jmr@…): * owner: macports-tickets@… => kimuraw@… * port: => rb-gnome Comment: Reading through this bug report, I find it hard to tell what the specific problem being reported is or even which port the ticket is against. Assigning to the maintainer of the first port mentioned. Please feel free to close as invalid, or request separate tickets to be opened for each separate problem. -- Ticket URL: <https://trac.macports.org/ticket/16872#comment:11> MacPorts <http://www.macports.org/> Ports system for Mac OS
#16872: configure: error: Package requirements (pygobject-2.0 >= 2.14.0) were not met: -------------------------------------+-------------------------------------- Reporter: rsopublic@… | Owner: kimuraw@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.6.0 Resolution: worksforme | Keywords: Port: rb-gnome | -------------------------------------+-------------------------------------- Changes (by kimuraw@…): * status: new => closed * resolution: => worksforme Comment: the latest version of port:rb-gnome does not have this problem. -- Ticket URL: <https://trac.macports.org/ticket/16872#comment:12> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts