[MacPorts] #17823: faad2 2.6.1/ffmpeg - configure error - autoreconf fails complaining about c++
#17823: faad2 2.6.1/ffmpeg - configure error - autoreconf fails complaining about c++ -------------------------------------+-------------------------------------- Reporter: nathan.sutton@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: -------------------------------------+-------------------------------------- Latest XCode from apple on osx installed last week. $ sudo port install ffmpeg +mmx +gpl +postproc +lame +extvorbis +theora +faac +faad +xvid +x264 +a52 +avfilter ---> Fetching faad2 ---> Attempting to fetch faad2-2.6.1.tar.gz from http://downloads.sourceforge.net/faac ---> Verifying checksum(s) for faad2 ---> Extracting faad2 ---> Applying patches to faad2 ---> Configuring faad2 Error: Target org.macports.configure returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2 && LIBTOOLIZE=/opt/local/bin/glibtoolize autoreconf -vif" returned error 1 Command output: autoreconf: Entering directory `.' autoreconf: configure.in: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.in: tracing autoreconf: running: /opt/local/bin/glibtoolize --copy --force glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. glibtoolize: copying file `./ltmain.sh' glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in- tree. glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /opt/local/bin/autoconf --force autoreconf: running: /opt/local/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.in:14: installing `./config.guess' configure.in:14: installing `./config.sub' configure.in:12: installing `./install-sh' configure.in:12: installing `./missing' common/mp4ff/Makefile.am: installing `./depcomp' /opt/local/share/automake-1.10/am/depend2.am: am__fastdepCXX does not appear in AM_CONDITIONAL /opt/local/share/automake-1.10/am/depend2.am: The usual way to define `am__fastdepCXX' is to add `AC_PROG_CXX' /opt/local/share/automake-1.10/am/depend2.am: to `configure.in' and run `aclocal' and `autoconf' again. plugins/mpeg4ip/Makefile.am: C++ source seen but `CXX' is undefined plugins/mpeg4ip/Makefile.am: The usual way to define `CXX' is to add `AC_PROG_CXX' plugins/mpeg4ip/Makefile.am: to `configure.in' and run `autoconf' again. Makefile.am: installing `./INSTALL' autoreconf: automake failed with exit status: 1 Error: The following dependencies failed to build: faad2 gmake lame libogg libsdl libtheora libvorbis x264 yasm Error: Status 1 encountered during processing. -- Ticket URL: <http://trac.macports.org/ticket/17823> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17823: faad2 2.6.1/ffmpeg - configure error - autoreconf fails complaining about c++ -------------------------------------+-------------------------------------- Reporter: nathan.sutton@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: -------------------------------------+-------------------------------------- Comment(by nathan.sutton@…): heh, wiki formatting: {{{ $ sudo port install ffmpeg +mmx +gpl +postproc +lame +extvorbis +theora +faac +faad +xvid +x264 +a52 +avfilter ---> Fetching faad2 ---> Attempting to fetch faad2-2.6.1.tar.gz from http://downloads.sourceforge.net/faac ---> Verifying checksum(s) for faad2 ---> Extracting faad2 ---> Applying patches to faad2 ---> Configuring faad2 Error: Target org.macports.configure returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2 && LIBTOOLIZE=/opt/local/bin/glibtoolize autoreconf -vif" returned error 1 Command output: autoreconf: Entering directory `.' autoreconf: configure.in: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.in: tracing autoreconf: running: /opt/local/bin/glibtoolize --copy --force glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. glibtoolize: copying file `./ltmain.sh' glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in- tree. glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /opt/local/bin/autoconf --force autoreconf: running: /opt/local/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.in:14: installing `./config.guess' configure.in:14: installing `./config.sub' configure.in:12: installing `./install-sh' configure.in:12: installing `./missing' common/mp4ff/Makefile.am: installing `./depcomp' /opt/local/share/automake-1.10/am/depend2.am: am__fastdepCXX does not appear in AM_CONDITIONAL /opt/local/share/automake-1.10/am/depend2.am: The usual way to define `am__fastdepCXX' is to add `AC_PROG_CXX' /opt/local/share/automake-1.10/am/depend2.am: to `configure.in' and run `aclocal' and `autoconf' again. plugins/mpeg4ip/Makefile.am: C++ source seen but `CXX' is undefined plugins/mpeg4ip/Makefile.am: The usual way to define `CXX' is to add `AC_PROG_CXX' plugins/mpeg4ip/Makefile.am: to `configure.in' and run `autoconf' again. Makefile.am: installing `./INSTALL' autoreconf: automake failed with exit status: 1 Error: The following dependencies failed to build: faad2 gmake lame libogg libsdl libtheora libvorbis x264 yasm Error: Status 1 encountered during processing. }}} -- Ticket URL: <http://trac.macports.org/ticket/17823#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17823: faad2 2.6.1/ffmpeg - configure error - autoreconf fails complaining about c++ -------------------------------------+-------------------------------------- Reporter: nathan.sutton@… | Owner: pguyot@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: faad2 -------------------------------------+-------------------------------------- Changes (by macsforever2000@…): * owner: macports-tickets@… => pguyot@… * port: => faad2 Old description:
Latest XCode from apple on osx installed last week.
$ sudo port install ffmpeg +mmx +gpl +postproc +lame +extvorbis +theora +faac +faad +xvid +x264 +a52 +avfilter ---> Fetching faad2 ---> Attempting to fetch faad2-2.6.1.tar.gz from http://downloads.sourceforge.net/faac ---> Verifying checksum(s) for faad2 ---> Extracting faad2 ---> Applying patches to faad2 ---> Configuring faad2 Error: Target org.macports.configure returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2 && LIBTOOLIZE=/opt/local/bin/glibtoolize autoreconf -vif" returned error 1 Command output: autoreconf: Entering directory `.' autoreconf: configure.in: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.in: tracing autoreconf: running: /opt/local/bin/glibtoolize --copy --force glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. glibtoolize: copying file `./ltmain.sh' glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in-tree. glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /opt/local/bin/autoconf --force autoreconf: running: /opt/local/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.in:14: installing `./config.guess' configure.in:14: installing `./config.sub' configure.in:12: installing `./install-sh' configure.in:12: installing `./missing' common/mp4ff/Makefile.am: installing `./depcomp' /opt/local/share/automake-1.10/am/depend2.am: am__fastdepCXX does not appear in AM_CONDITIONAL /opt/local/share/automake-1.10/am/depend2.am: The usual way to define `am__fastdepCXX' is to add `AC_PROG_CXX' /opt/local/share/automake-1.10/am/depend2.am: to `configure.in' and run `aclocal' and `autoconf' again. plugins/mpeg4ip/Makefile.am: C++ source seen but `CXX' is undefined plugins/mpeg4ip/Makefile.am: The usual way to define `CXX' is to add `AC_PROG_CXX' plugins/mpeg4ip/Makefile.am: to `configure.in' and run `autoconf' again. Makefile.am: installing `./INSTALL' autoreconf: automake failed with exit status: 1
Error: The following dependencies failed to build: faad2 gmake lame libogg libsdl libtheora libvorbis x264 yasm Error: Status 1 encountered during processing.
New description: Latest XCode from apple on osx installed last week. {{{ $ sudo port install ffmpeg +mmx +gpl +postproc +lame +extvorbis +theora +faac +faad +xvid +x264 +a52 +avfilter ---> Fetching faad2 ---> Attempting to fetch faad2-2.6.1.tar.gz from http://downloads.sourceforge.net/faac ---> Verifying checksum(s) for faad2 ---> Extracting faad2 ---> Applying patches to faad2 ---> Configuring faad2 Error: Target org.macports.configure returned: shell command "cd /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_audio_faad2/work/faad2 && LIBTOOLIZE=/opt/local/bin/glibtoolize autoreconf -vif" returned error 1 Command output: autoreconf: Entering directory `.' autoreconf: configure.in: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.in: tracing autoreconf: running: /opt/local/bin/glibtoolize --copy --force glibtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, `.'. glibtoolize: copying file `./ltmain.sh' glibtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and glibtoolize: rerunning glibtoolize, to keep the correct libtool macros in- tree. glibtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /opt/local/bin/autoconf --force autoreconf: running: /opt/local/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.in:14: installing `./config.guess' configure.in:14: installing `./config.sub' configure.in:12: installing `./install-sh' configure.in:12: installing `./missing' common/mp4ff/Makefile.am: installing `./depcomp' /opt/local/share/automake-1.10/am/depend2.am: am__fastdepCXX does not appear in AM_CONDITIONAL /opt/local/share/automake-1.10/am/depend2.am: The usual way to define `am__fastdepCXX' is to add `AC_PROG_CXX' /opt/local/share/automake-1.10/am/depend2.am: to `configure.in' and run `aclocal' and `autoconf' again. plugins/mpeg4ip/Makefile.am: C++ source seen but `CXX' is undefined plugins/mpeg4ip/Makefile.am: The usual way to define `CXX' is to add `AC_PROG_CXX' plugins/mpeg4ip/Makefile.am: to `configure.in' and run `autoconf' again. Makefile.am: installing `./INSTALL' autoreconf: automake failed with exit status: 1 Error: The following dependencies failed to build: faad2 gmake lame libogg libsdl libtheora libvorbis x264 yasm Error: Status 1 encountered during processing. }}} -- Comment: Assigning to maintainer. In general, please state the actual version number of software you have. Saying the "latest" doesn't actually tell us anything - not to mention in a few months when that may have changed. For instance, are you running Leopard or Tiger? The current latest version of Xcode is 3.1.2 for Leopard, but 2.5 for Tiger. -- Ticket URL: <http://trac.macports.org/ticket/17823#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17823: faad2 2.6.1/ffmpeg - configure error - autoreconf fails complaining about c++ -------------------------------------+-------------------------------------- Reporter: nathan.sutton@… | Owner: pguyot@… Type: defect | Status: new Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Keywords: | Port: faad2 -------------------------------------+-------------------------------------- Comment(by nathan.sutton@…): My mistake. I'm on OSX Leopard 10.5.6, Xcode 3.1.2. -- Ticket URL: <http://trac.macports.org/ticket/17823#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#17823: faad2 2.6.1/ffmpeg - configure error - autoreconf fails complaining about c++ --------------------------------------+------------------------------------- Reporter: nathan.sutton@… | Owner: pguyot@… Type: defect | Status: closed Priority: Normal | Milestone: Port Bugs Component: ports | Version: 1.7.0 Resolution: fixed | Keywords: Port: faad2 | --------------------------------------+------------------------------------- Changes (by jmr@…): * cc: jmr@… (added) * status: new => closed * resolution: => fixed Comment: Fixed in r44544. -- Ticket URL: <http://trac.macports.org/ticket/17823#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts