#26276: curl-ca-bundle: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory --------------------------------------+------------------------------------- Reporter: rdclark@… | Owner: ryandesign@… Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: curl-ca-bundle --------------------------------------+------------------------------------- Changes (by ryandesign@…): * status: new => assigned * owner: macports-tickets@… => ryandesign@… * cc: ryandesign@… (removed) * port: => curl-ca-bundle Old description:

Upgrading from curl-ca-bundle@7.21.1, I encountered the cannot stat certdata problem. Tried the remedy from previous ticket 25739 (clean --all and reinstall) to no avail.

Here's the log, which shows the checksum for the file passes, but then the file isn't found.

Any thoughts on working around this?

version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.8.9_0 exists in the ports tree :debug:main perl5 5.8.9_0 is the latest installed :debug:main perl5 5.8.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.8 5.8.9_3 exists in the ports tree :debug:main perl5.8 5.8.9_3 is the latest installed :debug:main perl5.8 5.8.9_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 :msg:main ---> Computing dependencies for curl-ca-bundle:info:main .:debug:main Searching for dependency: perl5 :debug:main Found Dependency: receipt exists for perl5 :msg:main :debug:main Executing org.macports.main (curl-ca-bundle) :debug:main Skipping completed org.macports.fetch (curl-ca-bundle) :debug:main Skipping completed org.macports.checksum (curl-ca-bundle) :debug:main setting option extract.cmd to /usr/bin/bzip2 :msg:main ---> Extracting curl-ca-bundle :debug:extract extract phase started at Sun Aug 29 11:45:48 PDT 2010 :debug:extract Executing org.macports.extract (curl-ca-bundle) :info:extract ---> Extracting curl-7.21.1.tar.bz2 :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf - curl-7.21.1/Makefile curl-7.21.1/lib/mk-ca-bundle.pl' :debug:extract Executing proc-post-org.macports.extract-extract-0 :error:extract Target org.macports.extract returned: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory :debug:extract Backtrace: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory while executing "$post $targetname" :info:extract Warning: the following items did not execute (for curl-ca- bundle): org.macports.activate org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:extract Log for curl-ca-bundle is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/main.log

New description: Upgrading from curl-ca-bundle@7.21.1, I encountered the cannot stat certdata problem. Tried the remedy from [ticket:25739 previous ticket 25739] (`clean --all` and reinstall) to no avail. Here's the log, which shows the checksum for the file passes, but then the file isn't found. Any thoughts on working around this? {{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5 5.8.9_0 exists in the ports tree :debug:main perl5 5.8.9_0 is the latest installed :debug:main perl5 5.8.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main perl5.8 5.8.9_3 exists in the ports tree :debug:main perl5.8 5.8.9_3 is the latest installed :debug:main perl5.8 5.8.9_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 :debug:main OS darwin/10.4.0 (Mac OS X 10.6) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 :msg:main ---> Computing dependencies for curl-ca-bundle:info:main .:debug:main Searching for dependency: perl5 :debug:main Found Dependency: receipt exists for perl5 :msg:main :debug:main Executing org.macports.main (curl-ca-bundle) :debug:main Skipping completed org.macports.fetch (curl-ca-bundle) :debug:main Skipping completed org.macports.checksum (curl-ca-bundle) :debug:main setting option extract.cmd to /usr/bin/bzip2 :msg:main ---> Extracting curl-ca-bundle :debug:extract extract phase started at Sun Aug 29 11:45:48 PDT 2010 :debug:extract Executing org.macports.extract (curl-ca-bundle) :info:extract ---> Extracting curl-7.21.1.tar.bz2 :debug:extract setting option extract.args to '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' :debug:extract Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.6' :debug:extract Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/work" && /usr/bin/bzip2 -dc '/opt/local/var/macports/distfiles/curl/curl-7.21.1.tar.bz2' | /usr/bin/gnutar --no-same-owner -xf - curl-7.21.1/Makefile curl-7.21.1/lib /mk-ca-bundle.pl' :debug:extract Executing proc-post-org.macports.extract-extract-0 :error:extract Target org.macports.extract returned: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory :debug:extract Backtrace: xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory while executing "$post $targetname" :info:extract Warning: the following items did not execute (for curl-ca- bundle): org.macports.activate org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install :notice:extract Log for curl-ca-bundle is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports .org_release_ports_net_curl-ca-bundle/main.log }}} -- Comment: Remember to fill in the Port field and to use WikiFormatting. Please clean and try again and if it fails again attach the log immediately after doing so; the log you pasted here says "Skipping completed org.macports.fetch" and "Skipping completed org.macports.checksum" indicating it was not taken from a clean run. The log says "xinstall: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory". Does that file exist? If not, watch what the port does during the fetch phase. Does it fetch that file? -- Ticket URL: <http://trac.macports.org/ticket/26276#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS

#26276: curl-ca-bundle: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory --------------------------------------+------------------------------------- Reporter: rdclark@… | Owner: ryandesign@… Type: defect | Status: assigned Priority: Normal | Milestone: Component: ports | Version: 1.9.1 Keywords: | Port: curl-ca-bundle --------------------------------------+------------------------------------- Comment(by ryandesign@…): I see it fetched curl-7.21.1.tar.bz2 but not certdata-1.65.txt. The only reason it wouldn't have fetched certdata-1.65.txt should be if it already has the file. And it is able to verify its checksum, which means it must have the file, and it must be the correct file. How can it then be that in the extract step, it doesn't have the file? I do not understand. One distant possibility: could it be that you ran some commands without "sudo"? Try cleaning both with and without sudo to reset things to the way they should be, then try installing again: {{{ port clean --all curl-ca-bundle sudo port clean --all curl-ca-bundle sudo port install curl-ca-bundle }}} If that works, then I think this is a problem that has already been fixed in MacPorts base. If that doesn't work, can you manually download certdata-1.65.txt from [http://distfiles.macports.org/curl/ here] and place it in /opt/local/var/macports/distfiles/curl? Does that work? -- Ticket URL: <http://trac.macports.org/ticket/26276#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS

#26276: curl-ca-bundle: Cannot stat: /opt/local/var/macports/distfiles/curl/certdata-1.65.txt, No such file or directory ---------------------------------------+------------------------------------ Reporter: rdclark@… | Owner: ryandesign@… Type: defect | Status: closed Priority: Normal | Milestone: MacPorts 1.9.2 Component: base | Version: 1.9.1 Resolution: duplicate | Keywords: Port: | ---------------------------------------+------------------------------------ Changes (by ryandesign@…): * status: assigned => closed * resolution: => duplicate * component: ports => base * port: curl-ca-bundle => * milestone: => MacPorts 1.9.2 Comment: Duplicate of #25418 and/or #25937. -- Ticket URL: <https://trac.macports.org/ticket/26276#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS