[MacPorts] #36567: libgeier @0.13 Processing of port libgeier failed
#36567: libgeier @0.13 Processing of port libgeier failed ------------------------+-------------------------------- Reporter: o1542217@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Keywords: | Port: libgeier @0.13 ------------------------+-------------------------------- Installation of the taxbird @0.18 port fails because of libgeier installation. Cleaning all ports and removing disabled ports didn't solve the problem. My Config: OSX 10.8.2 with Xcode 4.5.1 and most recent CommandLineTools. Attached is the libgeier @0.13 Installation log file: {{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.27.1_1 exists in the ports tree :debug:main pkgconfig 0.27.1_1 is the latest installed :debug:main pkgconfig 0.27.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.8.0_0 exists in the ports tree :debug:main libxml2 2.8.0_0 is the latest installed :debug:main libxml2 2.8.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.7_0 exists in the ports tree :debug:main zlib 1.2.7_0 is the latest installed :debug:main zlib 1.2.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xz 5.0.4_0 exists in the ports tree :debug:main xz 5.0.4_0 is the latest installed :debug:main xz 5.0.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxslt 1.1.26_0 exists in the ports tree :debug:main libxslt 1.1.26_0 is the latest installed :debug:main libxslt 1.1.26_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xmlsec 1.2.18_0 exists in the ports tree :debug:main xmlsec 1.2.18_0 is the latest installed :debug:main xmlsec 1.2.18_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security/xmlsec :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! xmlsec 1.2.18_0 >= xmlsec 1.2.18_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libtool 2.4.2_3 exists in the ports tree :debug:main libtool 2.4.2_3 is the latest installed :debug:main libtool 2.4.2_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libtool 2.4.2_3 >= libtool 2.4.2_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main libgcrypt 1.5.0_0 exists in the ports tree :debug:main libgcrypt 1.5.0_0 is the latest installed :debug:main libgcrypt 1.5.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libgpg-error 1.10_0 exists in the ports tree :debug:main libgpg-error 1.10_0 is the latest installed :debug:main libgpg-error 1.10_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel /libgpg-error :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gnutls 2.12.19_0 exists in the ports tree :debug:main gnutls 2.12.19_0 is the latest installed :debug:main gnutls 2.12.19_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gnutls :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gnutls 2.12.19_0 >= gnutls 2.12.19_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libtasn1 2.11_0 exists in the ports tree :debug:main libtasn1 2.11_0 is the latest installed :debug:main libtasn1 2.11_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libtasn1 2.11_0 >= libtasn1 2.11_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main lzo2 2.05_1 exists in the ports tree :debug:main lzo2 2.05_1 is the latest installed :debug:main lzo2 2.05_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main readline 6.2.000_0 exists in the ports tree :debug:main readline 6.2.000_0 is the latest installed :debug:main readline 6.2.000_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main nss 3.13.3_1 exists in the ports tree :debug:main nss 3.13.3_1 is the latest installed :debug:main nss 3.13.3_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/nss :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! nss 3.13.3_1 >= nss 3.13.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main nspr 4.8.9_0 exists in the ports tree :debug:main nspr 4.8.9_0 is the latest installed :debug:main nspr 4.8.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/nspr :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! nspr 4.8.9_0 >= nspr 4.8.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.14_1 exists in the ports tree :debug:main sqlite3 3.7.14_1 is the latest installed :debug:main sqlite3 3.7.14_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.14_1 >= sqlite3 3.7.14_1 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20120601-3.0_0 exists in the ports tree :debug:main libedit 20120601-3.0_0 is the latest installed :debug:main libedit 20120601-3.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.1c_0 exists in the ports tree :debug:main openssl 1.0.1c_0 is the latest installed :debug:main openssl 1.0.1c_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main argp-standalone 1.3_1 exists in the ports tree :debug:main argp-standalone 1.3_1 is the latest installed :debug:main argp-standalone 1.3_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel /argp-standalone :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! argp-standalone 1.3_1 >= argp-standalone 1.3_1 :msg:main ---> Computing dependencies for libgeier:info:main .:debug:main libgeier has no conflicts :debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: libxml2 :debug:main Found Dependency: receipt exists for libxml2 :debug:main Searching for dependency: libxslt :debug:main Found Dependency: receipt exists for libxslt :debug:main Searching for dependency: xmlsec :debug:main Found Dependency: receipt exists for xmlsec :debug:main Searching for dependency: nss :debug:main Found Dependency: receipt exists for nss :debug:main Searching for dependency: nspr :debug:main Found Dependency: receipt exists for nspr :debug:main Searching for dependency: argp-standalone :debug:main Found Dependency: receipt exists for argp-standalone :msg:main :debug:main Executing org.macports.main (libgeier) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 501 :debug:main Skipping completed org.macports.archivefetch (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Thu Oct 11 21:39:52 CEST 2012 :notice:build ---> Building libgeier :debug:build Executing org.macports.build (libgeier) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13' :info:build Making all in src :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build /usr/bin/make all-recursive :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build Making all in openssl :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src/openssl' :info:build make[3]: Nothing to be done for `all'. :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src/openssl' :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I../include -I../include -I../src/openssl -DDEFAULT_XMLSEC_TEMPLATE=\"/opt/local/share/libgeier/xmlsec.tmpl\" -DDEFAULT_CERT_FILE=\"/opt/local/share/libgeier/Elster2Cry.b64.cer\" -DDEFAULT_SCHEMA_DIR_URL=\"file:///opt/local/share/libgeier/schemas\" -DDEFAULT_STYLESHEET_DIR_URL=\"file:///opt/local/share/libgeier/stylesheets\" -DDEFAULT_CLEARING_TIMEOUT=30000 -I/opt/local/include -pipe -O2 -I/opt/local/include/nss -I/opt/local/include/nspr -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -I/opt/local/include/xmlsec1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/nss -I/opt/local/include/nspr -DXMLSEC_CRYPTO_NSS=1 -DXMLSEC_CRYPTO=\"nss\" -arch x86_64 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/libxml2 -DXMLSEC_CRYPTO=\"openssl\" -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -DXMLSEC_OPENSSL_098=1 -DXMLSEC_CRYPTO_OPENSSL=1 -I/opt/local/include/xmlsec1 -I/opt/local/include -I/opt/local/include/libxml2 -MT geier.o -MD -MP -MF .deps/geier.Tpo -c -o geier.o geier.c :info:build In file included from <built-in>:147: :info:build <command line>:14:9: warning: 'XMLSEC_CRYPTO' macro redefined :info:build #define XMLSEC_CRYPTO "openssl" :info:build ^ :info:build <command line>:13:9: note: previous definition is here :info:build #define XMLSEC_CRYPTO "nss" :info:build ^ :info:build geier.c:140:6: error: redefinition of 'pincode' with a different type :info:build char pincode[24]; /* pincode */ :info:build ^ :info:build geier.c:137:7: note: previous definition is here :info:build char *pincode = NULL; /* pincode */ :info:build ^ :info:build 1 warning and 1 error generated. :info:build make[3]: *** [geier.o] Error 1 :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build make[2]: *** [all-recursive] Error 1 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build make[1]: *** [all] Error 2 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build make: *** [all-recursive] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all :info:build Exit code: 2 :error:build org.macports.build for port libgeier returned: command execution failed :debug:build Error code: CHILDSTATUS 49555 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for libgeier: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port libgeier for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/main.log }}} -- Ticket URL: <https://trac.macports.org/ticket/36567> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36567: libgeier @0.13 Processing of port libgeier failed -------------------------+---------------------- Reporter: o1542217@… | Owner: tommyd@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: libgeier | -------------------------+---------------------- Changes (by macsforever2000@…): * owner: macports-tickets@… => tommyd@… * port: libgeier @0.13 => libgeier Comment: In the future, please Cc the port maintainer(s) and attach the main.log instead of pasting it into the description. -- Ticket URL: <https://trac.macports.org/ticket/36567#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36567: libgeier @0.13 Processing of port libgeier failed -------------------------+---------------------- Reporter: o1542217@… | Owner: tommyd@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: libgeier | -------------------------+---------------------- Old description:
Installation of the taxbird @0.18 port fails because of libgeier installation. Cleaning all ports and removing disabled ports didn't solve the problem.
My Config: OSX 10.8.2 with Xcode 4.5.1 and most recent CommandLineTools.
Attached is the libgeier @0.13 Installation log file:
{{{ version:1 :debug:main epoch: in tree: 0 installed: 0 :debug:main pkgconfig 0.27.1_1 exists in the ports tree :debug:main pkgconfig 0.27.1_1 is the latest installed :debug:main pkgconfig 0.27.1_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! pkgconfig 0.27.1_1 >= pkgconfig 0.27.1_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main libiconv 1.14_0 exists in the ports tree :debug:main libiconv 1.14_0 is the latest installed :debug:main libiconv 1.14_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxml2 2.8.0_0 exists in the ports tree :debug:main libxml2 2.8.0_0 is the latest installed :debug:main libxml2 2.8.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxml2 2.8.0_0 >= libxml2 2.8.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main zlib 1.2.7_0 exists in the ports tree :debug:main zlib 1.2.7_0 is the latest installed :debug:main zlib 1.2.7_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! zlib 1.2.7_0 >= zlib 1.2.7_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xz 5.0.4_0 exists in the ports tree :debug:main xz 5.0.4_0 is the latest installed :debug:main xz 5.0.4_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/xz :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! xz 5.0.4_0 >= xz 5.0.4_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gettext 0.18.1.1_2 exists in the ports tree :debug:main gettext 0.18.1.1_2 is the latest installed :debug:main gettext 0.18.1.1_2 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 :debug:main epoch: in tree: 0 installed: 0 :debug:main ncurses 5.9_1 exists in the ports tree :debug:main ncurses 5.9_1 is the latest installed :debug:main ncurses 5.9_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main expat 2.1.0_0 exists in the ports tree :debug:main expat 2.1.0_0 is the latest installed :debug:main expat 2.1.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libxslt 1.1.26_0 exists in the ports tree :debug:main libxslt 1.1.26_0 is the latest installed :debug:main libxslt 1.1.26_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxslt :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libxslt 1.1.26_0 >= libxslt 1.1.26_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main xmlsec 1.2.18_0 exists in the ports tree :debug:main xmlsec 1.2.18_0 is the latest installed :debug:main xmlsec 1.2.18_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/security/xmlsec :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! xmlsec 1.2.18_0 >= xmlsec 1.2.18_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libtool 2.4.2_3 exists in the ports tree :debug:main libtool 2.4.2_3 is the latest installed :debug:main libtool 2.4.2_3 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtool :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libtool 2.4.2_3 >= libtool 2.4.2_3 :debug:main epoch: in tree: 0 installed: 0 :debug:main libgcrypt 1.5.0_0 exists in the ports tree :debug:main libgcrypt 1.5.0_0 is the latest installed :debug:main libgcrypt 1.5.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libgcrypt :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libgcrypt 1.5.0_0 >= libgcrypt 1.5.0_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libgpg-error 1.10_0 exists in the ports tree :debug:main libgpg-error 1.10_0 is the latest installed :debug:main libgpg-error 1.10_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel /libgpg-error :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libgpg-error 1.10_0 >= libgpg-error 1.10_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main gnutls 2.12.19_0 exists in the ports tree :debug:main gnutls 2.12.19_0 is the latest installed :debug:main gnutls 2.12.19_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gnutls :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! gnutls 2.12.19_0 >= gnutls 2.12.19_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main libtasn1 2.11_0 exists in the ports tree :debug:main libtasn1 2.11_0 is the latest installed :debug:main libtasn1 2.11_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libtasn1 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! libtasn1 2.11_0 >= libtasn1 2.11_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main lzo2 2.05_1 exists in the ports tree :debug:main lzo2 2.05_1 is the latest installed :debug:main lzo2 2.05_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/lzo2 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! lzo2 2.05_1 >= lzo2 2.05_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main readline 6.2.000_0 exists in the ports tree :debug:main readline 6.2.000_0 is the latest installed :debug:main readline 6.2.000_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main nss 3.13.3_1 exists in the ports tree :debug:main nss 3.13.3_1 is the latest installed :debug:main nss 3.13.3_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/net/nss :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main universal_variant is false, so not adding the default universal variant :debug:main No need to upgrade! nss 3.13.3_1 >= nss 3.13.3_1 :debug:main epoch: in tree: 0 installed: 0 :debug:main nspr 4.8.9_0 exists in the ports tree :debug:main nspr 4.8.9_0 is the latest installed :debug:main nspr 4.8.9_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/nspr :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! nspr 4.8.9_0 >= nspr 4.8.9_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main sqlite3 3.7.14_1 exists in the ports tree :debug:main sqlite3 3.7.14_1 is the latest installed :debug:main sqlite3 3.7.14_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! sqlite3 3.7.14_1 >= sqlite3 3.7.14_1 :debug:main epoch: in tree: 20090923 installed: 20090923 :debug:main libedit 20120601-3.0_0 exists in the ports tree :debug:main libedit 20120601-3.0_0 is the latest installed :debug:main libedit 20120601-3.0_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! libedit 20120601-3.0_0 >= libedit 20120601-3.0_0 :debug:main epoch: in tree: 1 installed: 1 :debug:main openssl 1.0.1c_0 exists in the ports tree :debug:main openssl 1.0.1c_0 is the latest installed :debug:main openssl 1.0.1c_0 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main universal variant already exists, so not adding the default one :debug:main No need to upgrade! openssl 1.0.1c_0 >= openssl 1.0.1c_0 :debug:main epoch: in tree: 0 installed: 0 :debug:main argp-standalone 1.3_1 exists in the ports tree :debug:main argp-standalone 1.3_1 is the latest installed :debug:main argp-standalone 1.3_1 is active :debug:main Merging existing variants '' into variants :debug:main new fully merged portvariants: :debug:main Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel /argp-standalone :debug:main OS darwin/12.2.0 (Mac OS X 10.8) arch i386 :debug:main org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided :debug:main org.macports.unload registered provides 'unload', a pre- existing procedure. Target override will not be provided :debug:main org.macports.distfiles registered provides 'distfiles', a pre-existing procedure. Target override will not be provided :debug:main adding the default universal variant :debug:main Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf :debug:main No need to upgrade! argp-standalone 1.3_1 >= argp-standalone 1.3_1 :msg:main ---> Computing dependencies for libgeier:info:main .:debug:main libgeier has no conflicts :debug:main Searching for dependency: pkgconfig :debug:main Found Dependency: receipt exists for pkgconfig :debug:main Searching for dependency: libxml2 :debug:main Found Dependency: receipt exists for libxml2 :debug:main Searching for dependency: libxslt :debug:main Found Dependency: receipt exists for libxslt :debug:main Searching for dependency: xmlsec :debug:main Found Dependency: receipt exists for xmlsec :debug:main Searching for dependency: nss :debug:main Found Dependency: receipt exists for nss :debug:main Searching for dependency: nspr :debug:main Found Dependency: receipt exists for nspr :debug:main Searching for dependency: argp-standalone :debug:main Found Dependency: receipt exists for argp-standalone :msg:main :debug:main Executing org.macports.main (libgeier) :debug:main changing euid/egid - current euid: 0 - current egid: 0 :debug:main egid changed to: 501 :debug:main euid changed to: 501 :debug:main Skipping completed org.macports.archivefetch (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.fetch (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.checksum (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.extract (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.patch (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:main Skipping completed org.macports.configure (libgeier) :debug:main Privilege de-escalation not attempted as not running as root. :debug:build build phase started at Thu Oct 11 21:39:52 CEST 2012 :notice:build ---> Building libgeier :debug:build Executing org.macports.build (libgeier) :debug:build Environment: CPATH='/opt/local/include' CC_PRINT_OPTIONS_FILE='/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/.CC_PRINT_OPTIONS' LIBRARY_PATH='/opt/local/lib' CC_PRINT_OPTIONS='YES' MACOSX_DEPLOYMENT_TARGET='10.8' :debug:build Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all' :debug:build Executing command line: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all :info:build make: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13' :info:build Making all in src :info:build make[1]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build /usr/bin/make all-recursive :info:build make[2]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build Making all in openssl :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src/openssl' :info:build make[3]: Nothing to be done for `all'. :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src/openssl' :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I../include -I../include -I../src/openssl -DDEFAULT_XMLSEC_TEMPLATE=\"/opt/local/share/libgeier/xmlsec.tmpl\" -DDEFAULT_CERT_FILE=\"/opt/local/share/libgeier/Elster2Cry.b64.cer\" -DDEFAULT_SCHEMA_DIR_URL=\"file:///opt/local/share/libgeier/schemas\" -DDEFAULT_STYLESHEET_DIR_URL=\"file:///opt/local/share/libgeier/stylesheets\" -DDEFAULT_CLEARING_TIMEOUT=30000 -I/opt/local/include -pipe -O2 -I/opt/local/include/nss -I/opt/local/include/nspr -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -I/opt/local/include/xmlsec1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/nss -I/opt/local/include/nspr -DXMLSEC_CRYPTO_NSS=1 -DXMLSEC_CRYPTO=\"nss\" -arch x86_64 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/libxml2 -DXMLSEC_CRYPTO=\"openssl\" -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -DXMLSEC_OPENSSL_098=1 -DXMLSEC_CRYPTO_OPENSSL=1 -I/opt/local/include/xmlsec1 -I/opt/local/include -I/opt/local/include/libxml2 -MT geier.o -MD -MP -MF .deps/geier.Tpo -c -o geier.o geier.c :info:build In file included from <built-in>:147: :info:build <command line>:14:9: warning: 'XMLSEC_CRYPTO' macro redefined :info:build #define XMLSEC_CRYPTO "openssl" :info:build ^ :info:build <command line>:13:9: note: previous definition is here :info:build #define XMLSEC_CRYPTO "nss" :info:build ^ :info:build geier.c:140:6: error: redefinition of 'pincode' with a different type :info:build char pincode[24]; /* pincode */ :info:build ^ :info:build geier.c:137:7: note: previous definition is here :info:build char *pincode = NULL; /* pincode */ :info:build ^ :info:build 1 warning and 1 error generated. :info:build make[3]: *** [geier.o] Error 1 :info:build make[3]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build make[2]: *** [all-recursive] Error 1 :info:build make[2]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build make[1]: *** [all] Error 2 :info:build make[1]: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build make: *** [all-recursive] Error 1 :info:build make: Leaving directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13' :info:build Command failed: cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13" && /usr/bin/make -j8 -w all :info:build Exit code: 2 :error:build org.macports.build for port libgeier returned: command execution failed :debug:build Error code: CHILDSTATUS 49555 2 :debug:build Backtrace: command execution failed while executing "system -nice 0 $fullcmdstring" ("eval" body line 1) invoked from within "eval system $notty $nice \$fullcmdstring" invoked from within "command_exec build" (procedure "portbuild::build_main" line 8) invoked from within "$procedure $targetname" :info:build Warning: targets not executed for libgeier: org.macports.activate org.macports.build org.macports.destroot org.macports.install :notice:build Please see the log file for port libgeier for details: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/main.log }}}
New description: Installation of the taxbird @0.18 port fails because of libgeier installation. Cleaning all ports and removing disabled ports didn't solve the problem. My Config: OSX 10.8.2 with Xcode 4.5.1 and most recent CommandLineTools. Attached is the libgeier @0.13 Installation log file: -- Comment (by macsforever2000@…): Moved main.log to attachment. -- Ticket URL: <https://trac.macports.org/ticket/36567#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36567: libgeier @0.13 Processing of port libgeier failed -------------------------+---------------------- Reporter: o1542217@… | Owner: tommyd@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: libgeier | -------------------------+---------------------- Comment (by macsforever2000@…): Actual error is: {{{ :info:build make[3]: Entering directory `/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_finance_libgeier/libgeier/work/libgeier-0.13/src' :info:build /usr/bin/clang -DHAVE_CONFIG_H -I. -I../include -I../include -I../src/openssl -DDEFAULT_XMLSEC_TEMPLATE=\"/opt/local/share/libgeier/xmlsec.tmpl\" -DDEFAULT_CERT_FILE=\"/opt/local/share/libgeier/Elster2Cry.b64.cer\" -DDEFAULT_SCHEMA_DIR_URL=\"file:///opt/local/share/libgeier/schemas\" -DDEFAULT_STYLESHEET_DIR_URL=\"file:///opt/local/share/libgeier/stylesheets\" -DDEFAULT_CLEARING_TIMEOUT=30000 -I/opt/local/include -pipe -O2 -I/opt/local/include/nss -I/opt/local/include/nspr -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -I/opt/local/include/xmlsec1 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/nss -I/opt/local/include/nspr -DXMLSEC_CRYPTO_NSS=1 -DXMLSEC_CRYPTO=\"nss\" -arch x86_64 -I/opt/local/include/libxml2 -I/opt/local/include -I/opt/local/include/libxml2 -DXMLSEC_CRYPTO=\"openssl\" -D__XMLSEC_FUNCTION__=__FUNCTION__ -DXMLSEC_NO_SIZE_T -DXMLSEC_NO_GOST=1 -DXMLSEC_NO_XKMS=1 -DXMLSEC_DL_LIBLTDL=1, -DXMLSEC_OPENSSL_098=1 -DXMLSEC_CRYPTO_OPENSSL=1 -I/opt/local/include/xmlsec1 -I/opt/local/include -I/opt/local/include/libxml2 -MT geier.o -MD -MP -MF .deps/geier.Tpo -c -o geier.o geier.c :info:build In file included from <built-in>:147: :info:build <command line>:14:9: warning: 'XMLSEC_CRYPTO' macro redefined :info:build #define XMLSEC_CRYPTO "openssl" :info:build ^ :info:build <command line>:13:9: note: previous definition is here :info:build #define XMLSEC_CRYPTO "nss" :info:build ^ :info:build geier.c:140:6: error: redefinition of 'pincode' with a different type :info:build char pincode[24]; /* pincode */ :info:build ^ :info:build geier.c:137:7: note: previous definition is here :info:build char *pincode = NULL; /* pincode */ :info:build ^ :info:build 1 warning and 1 error generated. :info:build make[3]: *** [geier.o] Error 1 }}} -- Ticket URL: <https://trac.macports.org/ticket/36567#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36567: libgeier @0.13 Processing of port libgeier failed -------------------------+---------------------- Reporter: o1542217@… | Owner: tommyd@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: libgeier | -------------------------+---------------------- Comment (by me@…): It seems as if taxbird and libgeier (which is used by taxbird) are no longer developed further (see the announcement on http://www.taxbird.de). Since I cannot support this port without being backed by the original author, I'd rather like to remove it from the port's database again. What is the appropriate way to do this? -- Ticket URL: <https://trac.macports.org/ticket/36567#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#36567: libgeier @0.13 Processing of port libgeier failed -------------------------+-------------------------------- Reporter: o1542217@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.1.2 Resolution: | Keywords: Port: libgeier | -------------------------+-------------------------------- Changes (by macsforever2000@…): * owner: tommyd@… => macports-tickets@… Comment: tommyd has retired based on email communication 8/28/2013. -- Ticket URL: <https://trac.macports.org/ticket/36567#comment:5> MacPorts <http://www.macports.org/> Ports system for OS X
participants (1)
-
MacPorts