#34019: vtk5 @5.6.1_0+data+python27+qt4_mac+tcltk Unable to verify file checksums -------------------------------------+-------------------------------------- Reporter: bobby.mendoza@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 2.0.4 Keywords: | Port: -------------------------------------+-------------------------------------- I have been getting checksum errors whenever I upgrade vtkdata-5.8.0: {{{ Error: Checksum (md5) mismatch for vtkdata-5.8.0.tar.gz Error: Checksum (sha1) mismatch for vtkdata-5.8.0.tar.gz Error: Checksum (rmd160) mismatch for vtkdata-5.8.0.tar.gz Error: Target org.macports.checksum returned: Unable to verify file checksums }}} I have attached the log output. If it helps, here is the result of the debug upgrade {{{ DEBUG: epoch: in tree: 0 installed: 0 DEBUG: vtk5 5.8.0_0 exists in the ports tree DEBUG: vtk5 5.6.1_0 +data+python27+qt4_mac+tcltk is the latest installed DEBUG: vtk5 5.6.1_0 +data+python27+qt4_mac+tcltk is active DEBUG: Merging existing variants '+data+python27+qt4_mac+tcltk' into variants DEBUG: new fully merged portvariants: qt4_mac + tcltk + data + python27 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/vtk5 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/cmake-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl DEBUG: adding the default universal variant DEBUG: Executing variant tcltk provides tcltk DEBUG: Executing variant python27 provides python27 DEBUG: Executing variant qt4_mac provides qt4_mac DEBUG: Executing variant data provides data DEBUG: epoch: in tree: 0 installed: 0 DEBUG: cmake 2.8.7_0 exists in the ports tree DEBUG: cmake 2.8.7_0 +gui is the latest installed DEBUG: cmake 2.8.7_0 +gui is active DEBUG: Merging existing variants '+gui' into variants DEBUG: new fully merged portvariants: gui + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/cmake DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Executing variant gui provides gui DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl DEBUG: No need to upgrade! cmake 2.8.7_0 >= cmake 2.8.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libidn 1.22_0 exists in the ports tree DEBUG: libidn 1.22_0 is the latest installed DEBUG: libidn 1.22_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/mail/libidn DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! libidn 1.22_0 >= libidn 1.22_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.14_0 exists in the ports tree DEBUG: libiconv 1.14_0 is the latest installed DEBUG: libiconv 1.14_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libiconv DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libiconv 1.14_0 >= libiconv 1.14_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.18.1.1_2 exists in the ports tree DEBUG: gettext 0.18.1.1_2 is the latest installed DEBUG: gettext 0.18.1.1_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/gettext DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! gettext 0.18.1.1_2 >= gettext 0.18.1.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.9_1 exists in the ports tree DEBUG: ncurses 5.9_1 is the latest installed DEBUG: ncurses 5.9_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/ncurses DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! ncurses 5.9_1 >= ncurses 5.9_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.1.0_0 exists in the ports tree DEBUG: expat 2.1.0_0 is the latest installed DEBUG: expat 2.1.0_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/expat DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! expat 2.1.0_0 >= expat 2.1.0_0 DEBUG: epoch: in tree: 1 installed: 1 DEBUG: openssl 1.0.1_2 exists in the ports tree DEBUG: openssl 1.0.1_2 is the latest installed DEBUG: openssl 1.0.1_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/openssl DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! openssl 1.0.1_2 >= openssl 1.0.1_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: zlib 1.2.6_0 exists in the ports tree DEBUG: zlib 1.2.6_0 is the latest installed DEBUG: zlib 1.2.6_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/zlib DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! zlib 1.2.6_0 >= zlib 1.2.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: qt4-mac 4.7.4_1 exists in the ports tree DEBUG: qt4-mac 4.7.4_1 +mysql+quartz is the latest installed DEBUG: qt4-mac 4.7.4_1 +mysql+quartz is active DEBUG: Merging existing variants '+mysql+quartz' into variants DEBUG: new fully merged portvariants: mysql + quartz + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/aqua/qt4-mac DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/qt4-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant mysql provides mysql DEBUG: Executing variant quartz provides quartz DEBUG: No need to upgrade! qt4-mac 4.7.4_1 >= qt4-mac 4.7.4_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: dbus 1.4.18_0 exists in the ports tree DEBUG: dbus 1.4.18_0 is the latest installed DEBUG: dbus 1.4.18_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/dbus DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! dbus 1.4.18_0 >= dbus 1.4.18_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: sqlite3 3.7.11_0 exists in the ports tree DEBUG: sqlite3 3.7.11_0 is the latest installed DEBUG: sqlite3 3.7.11_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/sqlite3 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! sqlite3 3.7.11_0 >= sqlite3 3.7.11_0 DEBUG: epoch: in tree: 20090923 installed: 20090923 DEBUG: libedit 20110802-3.0_0 exists in the ports tree DEBUG: libedit 20110802-3.0_0 is the latest installed DEBUG: libedit 20110802-3.0_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libedit DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libedit 20110802-3.0_0 >= libedit 20110802-3.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tiff 3.9.5_0 exists in the ports tree DEBUG: tiff 3.9.5_0 is the latest installed DEBUG: tiff 3.9.5_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/tiff DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/xcodeversion-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! tiff 3.9.5_0 >= tiff 3.9.5_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: jpeg 8d_0 exists in the ports tree DEBUG: jpeg 8d_0 is the latest installed DEBUG: jpeg 8d_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/jpeg DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! jpeg 8d_0 >= jpeg 8d_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libpng 1.4.11_0 exists in the ports tree DEBUG: libpng 1.4.11_0 is the latest installed DEBUG: libpng 1.4.11_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libpng DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! libpng 1.4.11_0 >= libpng 1.4.11_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libmng 1.0.10_2 exists in the ports tree DEBUG: libmng 1.0.10_2 is the latest installed DEBUG: libmng 1.0.10_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/libmng DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! libmng 1.0.10_2 >= libmng 1.0.10_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: lcms 1.19_2 exists in the ports tree DEBUG: lcms 1.19_2 is the latest installed DEBUG: lcms 1.19_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/lcms DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! lcms 1.19_2 >= lcms 1.19_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: mysql5 5.1.61_0 exists in the ports tree DEBUG: mysql5 5.1.61_0 is the latest installed DEBUG: mysql5 5.1.61_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/mysql5 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! mysql5 5.1.61_0 >= mysql5 5.1.61_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: readline 6.2.000_0 exists in the ports tree DEBUG: readline 6.2.000_0 is the latest installed DEBUG: readline 6.2.000_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/readline DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! readline 6.2.000_0 >= readline 6.2.000_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: pkgconfig 0.26_1 exists in the ports tree DEBUG: pkgconfig 0.26_1 is the latest installed DEBUG: pkgconfig 0.26_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/pkgconfig DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! pkgconfig 0.26_1 >= pkgconfig 0.26_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: glib2 2.32.0_1 exists in the ports tree DEBUG: glib2 2.32.0_1 is the latest installed DEBUG: glib2 2.32.0_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/glib2 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! glib2 2.32.0_1 >= glib2 2.32.0_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libffi 3.0.10_2 exists in the ports tree DEBUG: libffi 3.0.10_2 is the latest installed DEBUG: libffi 3.0.10_2 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/devel/libffi DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! libffi 3.0.10_2 >= libffi 3.0.10_2 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.12.3_1 exists in the ports tree DEBUG: perl5 5.12.3_1 +perl5_12 is the latest installed DEBUG: perl5 5.12.3_1 +perl5_12 is active DEBUG: Merging existing variants '+perl5_12' into variants DEBUG: new fully merged portvariants: perl5_12 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: Executing variant perl5_12 provides perl5_12 DEBUG: No need to upgrade! perl5 5.12.3_1 >= perl5 5.12.3_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.12 5.12.4_0 exists in the ports tree DEBUG: perl5.12 5.12.4_0 is the latest installed DEBUG: perl5.12 5.12.4_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/perl5.12 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! perl5.12 5.12.4_0 >= perl5.12 5.12.4_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gdbm 1.10_1 exists in the ports tree DEBUG: gdbm 1.10_1 is the latest installed DEBUG: gdbm 1.10_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/gdbm DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! gdbm 1.10_1 >= gdbm 1.10_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tcl 8.5.11_0 exists in the ports tree DEBUG: tcl 8.5.11_0 is the latest installed DEBUG: tcl 8.5.11_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/tcl DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! tcl 8.5.11_0 >= tcl 8.5.11_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: tk 8.5.11_0 exists in the ports tree DEBUG: tk 8.5.11_0 is the latest installed DEBUG: tk 8.5.11_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/tk DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: adding the default universal variant DEBUG: No need to upgrade! tk 8.5.11_0 >= tk 8.5.11_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: Xft2 2.3.0_0 exists in the ports tree DEBUG: Xft2 2.3.0_0 is the latest installed DEBUG: Xft2 2.3.0_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/Xft2 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! Xft2 2.3.0_0 >= Xft2 2.3.0_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xrender 0.9.7_0 exists in the ports tree DEBUG: xrender 0.9.7_0 is the latest installed DEBUG: xrender 0.9.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11/xrender DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xrender 0.9.7_0 >= xrender 0.9.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libX11 1.4.99.901_0 exists in the ports tree DEBUG: xorg-libX11 1.4.99.901_0 is the latest installed DEBUG: xorg-libX11 1.4.99.901_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-libX11 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libX11 1.4.99.901_0 >= xorg-libX11 1.4.99.901_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXdmcp 1.1.1_0 exists in the ports tree DEBUG: xorg-libXdmcp 1.1.1_0 is the latest installed DEBUG: xorg-libXdmcp 1.1.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-libXdmcp DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXdmcp 1.1.1_0 >= xorg-libXdmcp 1.1.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXau 1.0.7_0 exists in the ports tree DEBUG: xorg-libXau 1.0.7_0 is the latest installed DEBUG: xorg-libXau 1.0.7_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-libXau DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXau 1.0.7_0 >= xorg-libXau 1.0.7_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xproto 7.0.23_0 exists in the ports tree DEBUG: xorg-xproto 7.0.23_0 is the latest installed DEBUG: xorg-xproto 7.0.23_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-xproto DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-xproto 7.0.23_0 >= xorg-xproto 7.0.23_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libxcb 1.8.1_1 exists in the ports tree DEBUG: xorg-libxcb 1.8.1_1 +python27 is the latest installed DEBUG: xorg-libxcb 1.8.1_1 +python27 is active DEBUG: Merging existing variants '+python27' into variants DEBUG: new fully merged portvariants: python27 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-libxcb DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Executing variant python27 provides python27 DEBUG: No need to upgrade! xorg-libxcb 1.8.1_1 >= xorg-libxcb 1.8.1_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xcb-proto 1.7.1_0 exists in the ports tree DEBUG: xorg-xcb-proto 1.7.1_0 +python27 is the latest installed DEBUG: xorg-xcb-proto 1.7.1_0 +python27 is active DEBUG: Merging existing variants '+python27' into variants DEBUG: new fully merged portvariants: python27 + DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-xcb-proto DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: Executing variant python27 provides python27 DEBUG: No need to upgrade! xorg-xcb-proto 1.7.1_0 >= xorg-xcb-proto 1.7.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libxml2 2.7.8_0 exists in the ports tree DEBUG: libxml2 2.7.8_0 is the latest installed DEBUG: libxml2 2.7.8_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/textproc/libxml2 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! libxml2 2.7.8_0 >= libxml2 2.7.8_0 DEBUG: epoch: in tree: 2 installed: 2 DEBUG: python27 2.7.2_4 exists in the ports tree DEBUG: python27 2.7.2_4 is the latest installed DEBUG: python27 2.7.2_4 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/lang/python27 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! python27 2.7.2_4 >= python27 2.7.2_4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: db46 4.6.21_6 exists in the ports tree DEBUG: db46 4.6.21_6 is the latest installed DEBUG: db46 4.6.21_6 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/databases/db46 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! db46 4.6.21_6 >= db46 4.6.21_6 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: bzip2 1.0.6_0 exists in the ports tree DEBUG: bzip2 1.0.6_0 is the latest installed DEBUG: bzip2 1.0.6_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/archivers/bzip2 DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! bzip2 1.0.6_0 >= bzip2 1.0.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: python_select 0.3_1 exists in the ports tree DEBUG: python_select 0.3_1 is the latest installed DEBUG: python_select 0.3_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/sysutils/python_select DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/select-1.0.tcl DEBUG: universal_variant is false, so not adding the default universal variant DEBUG: No need to upgrade! python_select 0.3_1 >= python_select 0.3_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libpthread-stubs 0.3_0 exists in the ports tree DEBUG: xorg-libpthread-stubs 0.3_0 is the latest installed DEBUG: xorg-libpthread-stubs 0.3_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-libpthread-stubs DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-libpthread-stubs 0.3_0 >= xorg-libpthread- stubs 0.3_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-kbproto 1.0.6_0 exists in the ports tree DEBUG: xorg-kbproto 1.0.6_0 is the latest installed DEBUG: xorg-kbproto 1.0.6_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-kbproto DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-kbproto 1.0.6_0 >= xorg-kbproto 1.0.6_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-renderproto 0.11.1_0 exists in the ports tree DEBUG: xorg-renderproto 0.11.1_0 is the latest installed DEBUG: xorg-renderproto 0.11.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-renderproto DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-renderproto 0.11.1_0 >= xorg-renderproto 0.11.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: freetype 2.4.9_1 exists in the ports tree DEBUG: freetype 2.4.9_1 is the latest installed DEBUG: freetype 2.4.9_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/print/freetype DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! freetype 2.4.9_1 >= freetype 2.4.9_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: fontconfig 2.9.0_1 exists in the ports tree DEBUG: fontconfig 2.9.0_1 is the latest installed DEBUG: fontconfig 2.9.0_1 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/fontconfig DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: No need to upgrade! fontconfig 2.9.0_1 >= fontconfig 2.9.0_1 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXScrnSaver 1.2.2_0 exists in the ports tree DEBUG: xorg-libXScrnSaver 1.2.2_0 is the latest installed DEBUG: xorg-libXScrnSaver 1.2.2_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-libXScrnSaver DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXScrnSaver 1.2.2_0 >= xorg- libXScrnSaver 1.2.2_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-libXext 1.3.1_0 exists in the ports tree DEBUG: xorg-libXext 1.3.1_0 is the latest installed DEBUG: xorg-libXext 1.3.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-libXext DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/_resources/port1.0/variant_descriptions.conf DEBUG: No need to upgrade! xorg-libXext 1.3.1_0 >= xorg-libXext 1.3.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-xextproto 7.2.1_0 exists in the ports tree DEBUG: xorg-xextproto 7.2.1_0 is the latest installed DEBUG: xorg-xextproto 7.2.1_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-xextproto DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-xextproto 7.2.1_0 >= xorg-xextproto 7.2.1_0 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: xorg-scrnsaverproto 1.2.2_0 exists in the ports tree DEBUG: xorg-scrnsaverproto 1.2.2_0 is the latest installed DEBUG: xorg-scrnsaverproto 1.2.2_0 is active DEBUG: Merging existing variants '' into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/x11 /xorg-scrnsaverproto DEBUG: OS darwin/11.3.0 (Mac OS X 10.7) arch i386 DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: only one arch supported, so not adding the default universal variant DEBUG: No need to upgrade! xorg-scrnsaverproto 1.2.2_0 >= xorg- scrnsaverproto 1.2.2_0 DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_vtk5/vtk5/work /opt/local/var/macports/sources/rsync.macports.org/release/tarballs/ports/graphics/vtk5/work DEBUG: changing euid/egid - current euid: 0 - current egid: 0 DEBUG: egid changed to: 501 DEBUG: euid changed to: 502 DEBUG: Starting logging for vtk5 ---> Computing dependencies for vtk5 DEBUG: Searching for dependency: cmake DEBUG: Found Dependency: receipt exists for cmake DEBUG: Searching for dependency: readline DEBUG: Found Dependency: receipt exists for readline DEBUG: Searching for dependency: pkgconfig DEBUG: Found Dependency: receipt exists for pkgconfig DEBUG: Searching for dependency: qt4-mac DEBUG: Found Dependency: receipt exists for qt4-mac DEBUG: Searching for dependency: tcl DEBUG: Found Dependency: receipt exists for tcl DEBUG: Searching for dependency: tk DEBUG: Found Dependency: receipt exists for tk DEBUG: Executing org.macports.main (vtk5) DEBUG: changing euid/egid - current euid: 0 - current egid: 0 DEBUG: egid changed to: 501 DEBUG: euid changed to: 502 DEBUG: archivefetch phase started at Thu Apr 12 16:15:52 PDT 2012 ---> Fetching archive for vtk5 DEBUG: Executing org.macports.archivefetch (vtk5) DEBUG: euid/egid changed to: 0/0 DEBUG: chowned /opt/local/var/macports/software/vtk5 to macports DEBUG: euid/egid changed to: 502/501 DEBUG: euid/egid changed to: 0/0 DEBUG: chowned /opt/local/var/macports/incoming to macports DEBUG: euid/egid changed to: 502/501 ---> vtk5-5.8.0_0+data+python27+qt4_mac+tcltk.darwin_11.x86_64.tbz2 doesn't seem to exist in /opt/local/var/macports/software/vtk5 ---> Attempting to fetch vtk5-5.8.0_0+data+python27+qt4_mac+tcltk.darwin_11.x86_64.tbz2 from http://packages.macports.org/vtk5 % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 DEBUG: Fetching archive failed:: The requested URL returned error: 404 DEBUG: Privilege de-escalation not attempted as not running as root. DEBUG: fetch phase started at Thu Apr 12 16:15:52 PDT 2012 ---> Fetching vtk5 DEBUG: euid/egid changed to: 0/0 DEBUG: chowned /opt/local/var/macports/distfiles/vtk5 to macports DEBUG: euid/egid changed to: 502/501 DEBUG: Executing org.macports.fetch (vtk5) DEBUG: Privilege de-escalation not attempted as not running as root. DEBUG: checksum phase started at Thu Apr 12 16:15:52 PDT 2012 ---> Verifying checksum(s) for vtk5 DEBUG: Executing org.macports.checksum (vtk5) ---> Checksumming vtk-5.8.0.tar.gz DEBUG: Correct (md5) checksum for vtk-5.8.0.tar.gz DEBUG: Correct (sha1) checksum for vtk-5.8.0.tar.gz DEBUG: Correct (rmd160) checksum for vtk-5.8.0.tar.gz ---> Checksumming vtkdata-5.8.0.tar.gz Error: Checksum (md5) mismatch for vtkdata-5.8.0.tar.gz Portfile checksum: vtkdata-5.8.0.tar.gz md5 67263bd972f923d39a60f01104368779 Distfile checksum: vtkdata-5.8.0.tar.gz md5 a05295b81930e894fc0e31866f399151 Error: Checksum (sha1) mismatch for vtkdata-5.8.0.tar.gz Portfile checksum: vtkdata-5.8.0.tar.gz sha1 7350863d6351a961c4813ad6e73f74428307cd35 Distfile checksum: vtkdata-5.8.0.tar.gz sha1 3bdb4414beaca5a338d1a504f8f261b7915cf39a Error: Checksum (rmd160) mismatch for vtkdata-5.8.0.tar.gz Portfile checksum: vtkdata-5.8.0.tar.gz rmd160 b77b5f6919beae406712b93cd333dd4fad5ff3d1 Distfile checksum: vtkdata-5.8.0.tar.gz rmd160 12541bf51f64871a35176558016cf97ccf881291 The correct checksum line may be: checksums vtk-5.8.0.tar.gz \ md5 37b7297d02d647cc6ca95b38174cb41f \ sha1 ece52f4fa92811fe927581e60ecb39a8a5f68cd9 \ rmd160 f100af93c4a4fc6a601aef563d3dd846d7aee914 \ vtkdata-5.8.0.tar.gz \ md5 a05295b81930e894fc0e31866f399151 \ sha1 3bdb4414beaca5a338d1a504f8f261b7915cf39a \ rmd160 12541bf51f64871a35176558016cf97ccf881291 Error: Target org.macports.checksum returned: Unable to verify file checksums DEBUG: Backtrace: Unable to verify file checksums while executing "$procedure $targetname" Warning: the following items did not execute (for vtk5): org.macports.install org.macports.checksum org.macports.extract org.macports.patch org.macports.configure org.macports.build org.macports.destroot Log for vtk5 is at: /opt/local/var/macports/logs/_opt_local_var_macports_sources_rsync.macports.org_release_tarballs_ports_graphics_vtk5/vtk5/main.log DEBUG: couldn't open "/System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex": no such file or directory while executing "open [file join $dir tclIndex]" Error: Unable to upgrade port: 1 To report a bug, see <http://guide.macports.org/#project.tickets> }}} As reported in the log, I do not have: {{{ /System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/tclIndex }}} But I do have: {{{ /System/Library/Frameworks/Tcl.framework/Versions/8.5/Resources/Scripts/tclIndex }}} What am I doing wrong? Thanks. -- Ticket URL: <https://trac.macports.org/ticket/34019> MacPorts <http://www.macports.org/> Ports system for Mac OS