[MacPorts] #23061: exempi build fails on patch (Snow Leopard 64-bit)
#23061: exempi build fails on patch (Snow Leopard 64-bit) ---------------------------------------------------------+------------------ Reporter: motya@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: snow leopard exempi 64-bit amd64 x86_64 XMP | Port: exempi ---------------------------------------------------------+------------------ I apologize for Reopening ticket. Despite changes in ticket 62080 I can not build exempi even after a complete uninstall ports. Here's a log of action after a new installation of ports for the snow leopard: {{{ MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port -v selfupdate Password: ---> Updating the ports tree Synchronizing local ports tree from rsync://rsync.macports.org/release/ports/ receiving file list ... done sent 36 bytes received 424733 bytes 77230.73 bytes/sec total size is 27687253 speedup is 65.18 ---> Updating MacPorts base sources using rsync receiving file list ... done sent 36 bytes received 6873 bytes 1974.00 bytes/sec total size is 4021380 speedup is 582.05 MacPorts base version 1.8.1 installed, MacPorts base version 1.8.1 downloaded. ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port install -f ncursesw > /dev/null && sudo port install exempi ---> Computing dependencies for exempi ---> Fetching expat ---> Attempting to fetch expat-2.0.1.tar.gz from http://mesh.dl.sourceforge.net/expat ---> Verifying checksum(s) for expat ---> Extracting expat ---> Configuring expat ---> Building expat ---> Staging expat into destroot ---> Installing expat @2.0.1_0 ---> Activating expat @2.0.1_0 ---> Cleaning expat ---> Fetching gperf ---> Attempting to fetch gperf-3.0.4.tar.gz from ftp://ftp.chg.ru/pub/gnu/gperf ---> Verifying checksum(s) for gperf ---> Extracting gperf ---> Configuring gperf ---> Building gperf ---> Staging gperf into destroot ---> Installing gperf @3.0.4_0 ---> Activating gperf @3.0.4_0 ---> Cleaning gperf ---> Fetching libiconv ---> Attempting to fetch libiconv-1.13.tar.gz from ftp://ftp.chg.ru/pub/gnu/libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ---> Building libiconv ---> Staging libiconv into destroot ---> Installing libiconv @1.13_0 ---> Activating libiconv @1.13_0 ---> Cleaning libiconv ---> Fetching ncurses ---> Verifying checksum(s) for ncurses ---> Extracting ncurses ---> Configuring ncurses ---> Building ncurses ---> Staging ncurses into destroot ---> Installing ncurses @5.7_0+darwin_10 ---> Activating ncurses @5.7_0+darwin_10 ---> Cleaning ncurses ---> Fetching gettext ---> Attempting to fetch gettext-0.17.tar.gz from ftp://ftp.chg.ru/pub/gnu/gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext ---> Staging gettext into destroot ---> Installing gettext @0.17_4 ---> Activating gettext @0.17_4 ---> Cleaning gettext ---> Fetching perl5.8 ---> Attempting to fetch perl-5.8.9.tar.bz2 from http://arn.se.distfiles.macports.org/perl5.8 ---> Attempting to fetch perl-5.8.9.tar.bz2 from http://www.cpan.org/src/ ---> Verifying checksum(s) for perl5.8 ---> Extracting perl5.8 ---> Applying patches to perl5.8 ---> Configuring perl5.8 ---> Building perl5.8 ---> Staging perl5.8 into destroot ---> Installing perl5.8 @5.8.9_3 ---> Activating perl5.8 @5.8.9_3 ---> Cleaning perl5.8 ---> Fetching perl5 ---> Verifying checksum(s) for perl5 ---> Extracting perl5 ---> Configuring perl5 ---> Building perl5 ---> Staging perl5 into destroot ---> Installing perl5 @5.8.9_0 ---> Activating perl5 @5.8.9_0 ---> Cleaning perl5 ---> Fetching p5-locale-gettext ---> Attempting to fetch gettext-1.05.tar.gz from ftp://ftp.chg.ru/pub/lang/perl/CPAN/modules/by-module/Locale ---> Verifying checksum(s) for p5-locale-gettext ---> Extracting p5-locale-gettext ---> Applying patches to p5-locale-gettext ---> Configuring p5-locale-gettext ---> Building p5-locale-gettext ---> Staging p5-locale-gettext into destroot ---> Installing p5-locale-gettext @1.05_0 ---> Activating p5-locale-gettext @1.05_0 ---> Cleaning p5-locale-gettext ---> Fetching help2man ---> Attempting to fetch help2man-1.37.1.tar.gz from ftp://ftp.chg.ru/pub/gnu/help2man ---> Verifying checksum(s) for help2man ---> Extracting help2man ---> Configuring help2man ---> Building help2man ---> Staging help2man into destroot ---> Installing help2man @1.37.1_1 ---> Activating help2man @1.37.1_1 ---> Cleaning help2man ---> Fetching m4 ---> Attempting to fetch m4-1.4.13.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/m4 ---> Verifying checksum(s) for m4 ---> Extracting m4 ---> Applying patches to m4 ---> Configuring m4 ---> Building m4 ---> Staging m4 into destroot ---> Installing m4 @1.4.13_0 ---> Activating m4 @1.4.13_0 ---> Cleaning m4 ---> Fetching autoconf ---> Attempting to fetch autoconf-2.65.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/autoconf ---> Verifying checksum(s) for autoconf ---> Extracting autoconf ---> Configuring autoconf ---> Building autoconf ---> Staging autoconf into destroot ---> Installing autoconf @2.65_0 ---> Activating autoconf @2.65_0 ---> Cleaning autoconf ---> Fetching automake ---> Attempting to fetch automake-1.11.1.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/automake ---> Verifying checksum(s) for automake ---> Extracting automake ---> Configuring automake ---> Building automake ---> Staging automake into destroot ---> Installing automake @1.11.1_0 ---> Activating automake @1.11.1_0 ---> Cleaning automake ---> Fetching libtool ---> Attempting to fetch libtool-2.2.6b.tar.gz from ftp://ftp.chg.ru/pub/gnu/libtool ---> Verifying checksum(s) for libtool ---> Extracting libtool ---> Configuring libtool ---> Building libtool ---> Staging libtool into destroot ---> Installing libtool @2.2.6b_0 ---> Activating libtool @2.2.6b_0 ---> Cleaning libtool ---> Fetching exempi ---> Attempting to fetch exempi-2.1.1.tar.gz from http://arn.se.distfiles.macports.org/exempi ---> Attempting to fetch exempi-2.1.1.tar.gz from http://libopenraw.freedesktop.org/download/ ---> Verifying checksum(s) for exempi ---> Extracting exempi ---> Applying patches to exempi Error: Target org.macports.patch returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files /patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1 Command output: can't find file to patch at input line 3 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig 2009-03-12 00:59:21.000000000 +0000 |+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02 21:58:49.000000000 +0100 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored Error: Status 1 encountered during processing. }}} Thank you for your help. -- Ticket URL: <http://trac.macports.org/ticket/23061> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch (Snow Leopard 64-bit) ---------------------------------------------------------+------------------ Reporter: motya@… | Owner: macports-tickets@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: snow leopard exempi 64-bit amd64 x86_64 XMP | Port: exempi ---------------------------------------------------------+------------------ Comment(by motya@…): Also: the opt directory purged before installing _dmg package_ of MacPorts for the Snow Leopard. -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:1> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch (Snow Leopard 64-bit) ---------------------------+------------------------------------------------ Reporter: motya@… | Owner: devans@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: exempi ---------------------------+------------------------------------------------ Changes (by macsforever2000@…): * cc: motya@… (removed) * keywords: snow leopard exempi 64-bit amd64 x86_64 XMP => * owner: macports-tickets@… => devans@… Old description:
I apologize for Reopening ticket. Despite changes in ticket 62080 I can not build exempi even after a complete uninstall ports.
Here's a log of action after a new installation of ports for the snow leopard:
{{{ MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port -v selfupdate Password: ---> Updating the ports tree Synchronizing local ports tree from rsync://rsync.macports.org/release/ports/ receiving file list ... done
sent 36 bytes received 424733 bytes 77230.73 bytes/sec total size is 27687253 speedup is 65.18 ---> Updating MacPorts base sources using rsync receiving file list ... done
sent 36 bytes received 6873 bytes 1974.00 bytes/sec total size is 4021380 speedup is 582.05 MacPorts base version 1.8.1 installed, MacPorts base version 1.8.1 downloaded. ---> MacPorts base is already the latest version
The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port install -f ncursesw > /dev/null && sudo port install exempi ---> Computing dependencies for exempi ---> Fetching expat ---> Attempting to fetch expat-2.0.1.tar.gz from http://mesh.dl.sourceforge.net/expat ---> Verifying checksum(s) for expat ---> Extracting expat ---> Configuring expat ---> Building expat ---> Staging expat into destroot ---> Installing expat @2.0.1_0 ---> Activating expat @2.0.1_0 ---> Cleaning expat ---> Fetching gperf ---> Attempting to fetch gperf-3.0.4.tar.gz from ftp://ftp.chg.ru/pub/gnu/gperf ---> Verifying checksum(s) for gperf ---> Extracting gperf ---> Configuring gperf ---> Building gperf ---> Staging gperf into destroot ---> Installing gperf @3.0.4_0 ---> Activating gperf @3.0.4_0 ---> Cleaning gperf ---> Fetching libiconv ---> Attempting to fetch libiconv-1.13.tar.gz from ftp://ftp.chg.ru/pub/gnu/libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ---> Building libiconv ---> Staging libiconv into destroot ---> Installing libiconv @1.13_0 ---> Activating libiconv @1.13_0 ---> Cleaning libiconv ---> Fetching ncurses ---> Verifying checksum(s) for ncurses ---> Extracting ncurses ---> Configuring ncurses ---> Building ncurses ---> Staging ncurses into destroot ---> Installing ncurses @5.7_0+darwin_10 ---> Activating ncurses @5.7_0+darwin_10 ---> Cleaning ncurses ---> Fetching gettext ---> Attempting to fetch gettext-0.17.tar.gz from ftp://ftp.chg.ru/pub/gnu/gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext ---> Staging gettext into destroot ---> Installing gettext @0.17_4 ---> Activating gettext @0.17_4 ---> Cleaning gettext ---> Fetching perl5.8 ---> Attempting to fetch perl-5.8.9.tar.bz2 from http://arn.se.distfiles.macports.org/perl5.8 ---> Attempting to fetch perl-5.8.9.tar.bz2 from http://www.cpan.org/src/ ---> Verifying checksum(s) for perl5.8 ---> Extracting perl5.8 ---> Applying patches to perl5.8 ---> Configuring perl5.8 ---> Building perl5.8 ---> Staging perl5.8 into destroot ---> Installing perl5.8 @5.8.9_3 ---> Activating perl5.8 @5.8.9_3 ---> Cleaning perl5.8 ---> Fetching perl5 ---> Verifying checksum(s) for perl5 ---> Extracting perl5 ---> Configuring perl5 ---> Building perl5 ---> Staging perl5 into destroot ---> Installing perl5 @5.8.9_0 ---> Activating perl5 @5.8.9_0 ---> Cleaning perl5 ---> Fetching p5-locale-gettext ---> Attempting to fetch gettext-1.05.tar.gz from ftp://ftp.chg.ru/pub/lang/perl/CPAN/modules/by-module/Locale ---> Verifying checksum(s) for p5-locale-gettext ---> Extracting p5-locale-gettext ---> Applying patches to p5-locale-gettext ---> Configuring p5-locale-gettext ---> Building p5-locale-gettext ---> Staging p5-locale-gettext into destroot ---> Installing p5-locale-gettext @1.05_0 ---> Activating p5-locale-gettext @1.05_0 ---> Cleaning p5-locale-gettext ---> Fetching help2man ---> Attempting to fetch help2man-1.37.1.tar.gz from ftp://ftp.chg.ru/pub/gnu/help2man ---> Verifying checksum(s) for help2man ---> Extracting help2man ---> Configuring help2man ---> Building help2man ---> Staging help2man into destroot ---> Installing help2man @1.37.1_1 ---> Activating help2man @1.37.1_1 ---> Cleaning help2man ---> Fetching m4 ---> Attempting to fetch m4-1.4.13.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/m4 ---> Verifying checksum(s) for m4 ---> Extracting m4 ---> Applying patches to m4 ---> Configuring m4 ---> Building m4 ---> Staging m4 into destroot ---> Installing m4 @1.4.13_0 ---> Activating m4 @1.4.13_0 ---> Cleaning m4 ---> Fetching autoconf ---> Attempting to fetch autoconf-2.65.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/autoconf ---> Verifying checksum(s) for autoconf ---> Extracting autoconf ---> Configuring autoconf ---> Building autoconf ---> Staging autoconf into destroot ---> Installing autoconf @2.65_0 ---> Activating autoconf @2.65_0 ---> Cleaning autoconf ---> Fetching automake ---> Attempting to fetch automake-1.11.1.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/automake ---> Verifying checksum(s) for automake ---> Extracting automake ---> Configuring automake ---> Building automake ---> Staging automake into destroot ---> Installing automake @1.11.1_0 ---> Activating automake @1.11.1_0 ---> Cleaning automake ---> Fetching libtool ---> Attempting to fetch libtool-2.2.6b.tar.gz from ftp://ftp.chg.ru/pub/gnu/libtool ---> Verifying checksum(s) for libtool ---> Extracting libtool ---> Configuring libtool ---> Building libtool ---> Staging libtool into destroot ---> Installing libtool @2.2.6b_0 ---> Activating libtool @2.2.6b_0 ---> Cleaning libtool ---> Fetching exempi ---> Attempting to fetch exempi-2.1.1.tar.gz from http://arn.se.distfiles.macports.org/exempi ---> Attempting to fetch exempi-2.1.1.tar.gz from http://libopenraw.freedesktop.org/download/ ---> Verifying checksum(s) for exempi ---> Extracting exempi ---> Applying patches to exempi Error: Target org.macports.patch returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files /patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1 Command output: can't find file to patch at input line 3 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig 2009-03-12 00:59:21.000000000 +0000 |+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02 21:58:49.000000000 +0100 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored
Error: Status 1 encountered during processing. }}}
Thank you for your help.
New description: I apologize for Reopening ticket. Despite changes in r62080 I can not build exempi even after a complete uninstall ports. Here's a log of action after a new installation of ports for the snow leopard: {{{ MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port -v selfupdate Password: ---> Updating the ports tree Synchronizing local ports tree from rsync://rsync.macports.org/release/ports/ receiving file list ... done sent 36 bytes received 424733 bytes 77230.73 bytes/sec total size is 27687253 speedup is 65.18 ---> Updating MacPorts base sources using rsync receiving file list ... done sent 36 bytes received 6873 bytes 1974.00 bytes/sec total size is 4021380 speedup is 582.05 MacPorts base version 1.8.1 installed, MacPorts base version 1.8.1 downloaded. ---> MacPorts base is already the latest version The ports tree has been updated. To upgrade your installed ports, you should run port upgrade outdated MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port install -f ncursesw > /dev/null && sudo port install exempi ---> Computing dependencies for exempi ---> Fetching expat ---> Attempting to fetch expat-2.0.1.tar.gz from http://mesh.dl.sourceforge.net/expat ---> Verifying checksum(s) for expat ---> Extracting expat ---> Configuring expat ---> Building expat ---> Staging expat into destroot ---> Installing expat @2.0.1_0 ---> Activating expat @2.0.1_0 ---> Cleaning expat ---> Fetching gperf ---> Attempting to fetch gperf-3.0.4.tar.gz from ftp://ftp.chg.ru/pub/gnu/gperf ---> Verifying checksum(s) for gperf ---> Extracting gperf ---> Configuring gperf ---> Building gperf ---> Staging gperf into destroot ---> Installing gperf @3.0.4_0 ---> Activating gperf @3.0.4_0 ---> Cleaning gperf ---> Fetching libiconv ---> Attempting to fetch libiconv-1.13.tar.gz from ftp://ftp.chg.ru/pub/gnu/libiconv ---> Verifying checksum(s) for libiconv ---> Extracting libiconv ---> Applying patches to libiconv ---> Configuring libiconv ---> Building libiconv ---> Staging libiconv into destroot ---> Installing libiconv @1.13_0 ---> Activating libiconv @1.13_0 ---> Cleaning libiconv ---> Fetching ncurses ---> Verifying checksum(s) for ncurses ---> Extracting ncurses ---> Configuring ncurses ---> Building ncurses ---> Staging ncurses into destroot ---> Installing ncurses @5.7_0+darwin_10 ---> Activating ncurses @5.7_0+darwin_10 ---> Cleaning ncurses ---> Fetching gettext ---> Attempting to fetch gettext-0.17.tar.gz from ftp://ftp.chg.ru/pub/gnu/gettext ---> Verifying checksum(s) for gettext ---> Extracting gettext ---> Applying patches to gettext ---> Configuring gettext ---> Building gettext ---> Staging gettext into destroot ---> Installing gettext @0.17_4 ---> Activating gettext @0.17_4 ---> Cleaning gettext ---> Fetching perl5.8 ---> Attempting to fetch perl-5.8.9.tar.bz2 from http://arn.se.distfiles.macports.org/perl5.8 ---> Attempting to fetch perl-5.8.9.tar.bz2 from http://www.cpan.org/src/ ---> Verifying checksum(s) for perl5.8 ---> Extracting perl5.8 ---> Applying patches to perl5.8 ---> Configuring perl5.8 ---> Building perl5.8 ---> Staging perl5.8 into destroot ---> Installing perl5.8 @5.8.9_3 ---> Activating perl5.8 @5.8.9_3 ---> Cleaning perl5.8 ---> Fetching perl5 ---> Verifying checksum(s) for perl5 ---> Extracting perl5 ---> Configuring perl5 ---> Building perl5 ---> Staging perl5 into destroot ---> Installing perl5 @5.8.9_0 ---> Activating perl5 @5.8.9_0 ---> Cleaning perl5 ---> Fetching p5-locale-gettext ---> Attempting to fetch gettext-1.05.tar.gz from ftp://ftp.chg.ru/pub/lang/perl/CPAN/modules/by-module/Locale ---> Verifying checksum(s) for p5-locale-gettext ---> Extracting p5-locale-gettext ---> Applying patches to p5-locale-gettext ---> Configuring p5-locale-gettext ---> Building p5-locale-gettext ---> Staging p5-locale-gettext into destroot ---> Installing p5-locale-gettext @1.05_0 ---> Activating p5-locale-gettext @1.05_0 ---> Cleaning p5-locale-gettext ---> Fetching help2man ---> Attempting to fetch help2man-1.37.1.tar.gz from ftp://ftp.chg.ru/pub/gnu/help2man ---> Verifying checksum(s) for help2man ---> Extracting help2man ---> Configuring help2man ---> Building help2man ---> Staging help2man into destroot ---> Installing help2man @1.37.1_1 ---> Activating help2man @1.37.1_1 ---> Cleaning help2man ---> Fetching m4 ---> Attempting to fetch m4-1.4.13.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/m4 ---> Verifying checksum(s) for m4 ---> Extracting m4 ---> Applying patches to m4 ---> Configuring m4 ---> Building m4 ---> Staging m4 into destroot ---> Installing m4 @1.4.13_0 ---> Activating m4 @1.4.13_0 ---> Cleaning m4 ---> Fetching autoconf ---> Attempting to fetch autoconf-2.65.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/autoconf ---> Verifying checksum(s) for autoconf ---> Extracting autoconf ---> Configuring autoconf ---> Building autoconf ---> Staging autoconf into destroot ---> Installing autoconf @2.65_0 ---> Activating autoconf @2.65_0 ---> Cleaning autoconf ---> Fetching automake ---> Attempting to fetch automake-1.11.1.tar.bz2 from ftp://ftp.chg.ru/pub/gnu/automake ---> Verifying checksum(s) for automake ---> Extracting automake ---> Configuring automake ---> Building automake ---> Staging automake into destroot ---> Installing automake @1.11.1_0 ---> Activating automake @1.11.1_0 ---> Cleaning automake ---> Fetching libtool ---> Attempting to fetch libtool-2.2.6b.tar.gz from ftp://ftp.chg.ru/pub/gnu/libtool ---> Verifying checksum(s) for libtool ---> Extracting libtool ---> Configuring libtool ---> Building libtool ---> Staging libtool into destroot ---> Installing libtool @2.2.6b_0 ---> Activating libtool @2.2.6b_0 ---> Cleaning libtool ---> Fetching exempi ---> Attempting to fetch exempi-2.1.1.tar.gz from http://arn.se.distfiles.macports.org/exempi ---> Attempting to fetch exempi-2.1.1.tar.gz from http://libopenraw.freedesktop.org/download/ ---> Verifying checksum(s) for exempi ---> Extracting exempi ---> Applying patches to exempi Error: Target org.macports.patch returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files /patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1 Command output: can't find file to patch at input line 3 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig 2009-03-12 00:59:21.000000000 +0000 |+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02 21:58:49.000000000 +0100 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored Error: Status 1 encountered during processing. }}} Thank you for your help. -- -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:2> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch (Snow Leopard 64-bit) ---------------------------+------------------------------------------------ Reporter: motya@… | Owner: devans@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: exempi ---------------------------+------------------------------------------------ Comment(by jmr@…): Still unable to reproduce on 10.6/trunk or 10.5/1.8.1. BTW, `port install -f ncursesw` makes no sense, -f is not going to fix anything and it's not even in the right place. Much more useful would be the output of {{{ sudo port clean exempi && sudo port -d install exempi }}} -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:3> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch (Snow Leopard 64-bit) ---------------------------+------------------------------------------------ Reporter: motya@… | Owner: devans@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: exempi ---------------------------+------------------------------------------------ Comment(by motya@…): Thanks for attention. Here is the log of ''sudo port clean exempi && sudo port -d install exempi": {{{ MacBook-Pro-Olexandr-Matasov:~ motya$ sudo port clean exempi && sudo port -d install exempi Password: ---> Cleaning exempi DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port exempi. DEBUG: Requested variant i386 is not provided by port exempi. DEBUG: Requested variant macosx is not provided by port exempi. DEBUG: Attempting ln -sf /opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/work DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: autoconf 2.65_0 exists in the ports tree DEBUG: autoconf 2.65_0 is the latest installed DEBUG: autoconf 2.65_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/autoconf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port autoconf. DEBUG: Requested variant i386 is not provided by port autoconf. DEBUG: Requested variant macosx is not provided by port autoconf. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5 5.8.9_0 exists in the ports tree DEBUG: perl5 5.8.9_0 is the latest installed DEBUG: perl5 5.8.9_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5. DEBUG: Requested variant i386 is not provided by port perl5. DEBUG: Requested variant macosx is not provided by port perl5. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: perl5.8 5.8.9_3 exists in the ports tree DEBUG: perl5.8 5.8.9_3 is the latest installed DEBUG: perl5.8 5.8.9_3 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/lang/perl5.8 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port perl5.8. DEBUG: Requested variant i386 is not provided by port perl5.8. DEBUG: Requested variant macosx is not provided by port perl5.8. DEBUG: No need to upgrade! perl5.8 5.8.9_3 >= perl5.8 5.8.9_3 DEBUG: No need to upgrade! perl5 5.8.9_0 >= perl5 5.8.9_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: epoch: in tree: 0 installed: 0 DEBUG: m4 1.4.13_0 exists in the ports tree DEBUG: m4 1.4.13_0 is the latest installed DEBUG: m4 1.4.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/m4 DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port m4. DEBUG: Requested variant i386 is not provided by port m4. DEBUG: Requested variant macosx is not provided by port m4. DEBUG: No need to upgrade! m4 1.4.13_0 >= m4 1.4.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: epoch: in tree: 0 installed: 0 DEBUG: help2man 1.37.1_1 exists in the ports tree DEBUG: help2man 1.37.1_1 is the latest installed DEBUG: help2man 1.37.1_1 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/help2man DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port help2man. DEBUG: Requested variant i386 is not provided by port help2man. DEBUG: Requested variant macosx is not provided by port help2man. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -locale-gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: p5-locale-gettext 1.05_0 exists in the ports tree DEBUG: p5-locale-gettext 1.05_0 is the latest installed DEBUG: p5-locale-gettext 1.05_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/perl/p5 -locale-gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/perl5-1.0.tcl DEBUG: 'universal_variant no' specified, so not adding the default universal variant DEBUG: Requested variant darwin is not provided by port p5-locale-gettext. DEBUG: Requested variant i386 is not provided by port p5-locale-gettext. DEBUG: Requested variant macosx is not provided by port p5-locale-gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gettext 0.17_4 exists in the ports tree DEBUG: gettext 0.17_4 is the latest installed DEBUG: gettext 0.17_4 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gettext DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/archcheck-1.0.tcl DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gettext. DEBUG: Requested variant i386 is not provided by port gettext. DEBUG: Requested variant macosx is not provided by port gettext. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libiconv 1.13_0 exists in the ports tree DEBUG: libiconv 1.13_0 is the latest installed DEBUG: libiconv 1.13_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/libiconv DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port libiconv. DEBUG: Requested variant i386 is not provided by port libiconv. DEBUG: Requested variant macosx is not provided by port libiconv. DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: epoch: in tree: 0 installed: 0 DEBUG: gperf 3.0.4_0 exists in the ports tree DEBUG: gperf 3.0.4_0 is the latest installed DEBUG: gperf 3.0.4_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/gperf DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port gperf. DEBUG: Requested variant i386 is not provided by port gperf. DEBUG: Requested variant macosx is not provided by port gperf. DEBUG: No need to upgrade! gperf 3.0.4_0 >= gperf 3.0.4_0 DEBUG: No need to upgrade! libiconv 1.13_0 >= libiconv 1.13_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncurses 5.7_0 exists in the ports tree DEBUG: ncurses 5.7_0 +darwin_10 is the latest installed DEBUG: ncurses 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncurses DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncurses. DEBUG: Requested variant i386 is not provided by port ncurses. DEBUG: Requested variant macosx is not provided by port ncurses. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: epoch: in tree: 0 installed: 0 DEBUG: ncursesw 5.7_0 exists in the ports tree DEBUG: ncursesw 5.7_0 +darwin_10 is the latest installed DEBUG: ncursesw 5.7_0 +darwin_10 is active DEBUG: Merging existing variants darwin_10 into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/ncursesw DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: Using group file /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/group/muniversal-1.0.tcl DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: universal variant already exists, so not adding the default one DEBUG: Requested variant darwin is not provided by port ncursesw. DEBUG: Requested variant i386 is not provided by port ncursesw. DEBUG: Requested variant macosx is not provided by port ncursesw. DEBUG: Executing variant darwin_10 provides darwin_10 DEBUG: No need to upgrade! ncursesw 5.7_0 >= ncursesw 5.7_0 DEBUG: No need to upgrade! ncurses 5.7_0 >= ncurses 5.7_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: epoch: in tree: 0 installed: 0 DEBUG: expat 2.0.1_0 exists in the ports tree DEBUG: expat 2.0.1_0 is the latest installed DEBUG: expat 2.0.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/textproc/expat DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port expat. DEBUG: Requested variant i386 is not provided by port expat. DEBUG: Requested variant macosx is not provided by port expat. DEBUG: No need to upgrade! expat 2.0.1_0 >= expat 2.0.1_0 DEBUG: No need to upgrade! gettext 0.17_4 >= gettext 0.17_4 DEBUG: No need to upgrade! p5-locale-gettext 1.05_0 >= p5-locale-gettext 1.05_0 DEBUG: No need to upgrade! help2man 1.37.1_1 >= help2man 1.37.1_1 DEBUG: No need to upgrade! autoconf 2.65_0 >= autoconf 2.65_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: epoch: in tree: 0 installed: 0 DEBUG: automake 1.11.1_0 exists in the ports tree DEBUG: automake 1.11.1_0 is the latest installed DEBUG: automake 1.11.1_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/automake DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port automake. DEBUG: Requested variant i386 is not provided by port automake. DEBUG: Requested variant macosx is not provided by port automake. DEBUG: No need to upgrade! automake 1.11.1_0 >= automake 1.11.1_0 DEBUG: Found port in file:///opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: epoch: in tree: 0 installed: 0 DEBUG: libtool 2.2.6b_0 exists in the ports tree DEBUG: libtool 2.2.6b_0 is the latest installed DEBUG: libtool 2.2.6b_0 is active DEBUG: Merging existing variants into variants DEBUG: new fully merged portvariants: DEBUG: Changing to port directory: /opt/local/var/macports/sources/rsync.macports.org/release/ports/devel/libtool DEBUG: OS Platform: darwin DEBUG: OS Version: 10.2.0 DEBUG: Mac OS X Version: 10.6 DEBUG: System Arch: i386 DEBUG: setting option os.universal_supported to yes DEBUG: org.macports.load registered provides 'load', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.unload registered provides 'unload', a pre-existing procedure. Target override will not be provided DEBUG: org.macports.distfiles registered provides 'distfiles', a pre- existing procedure. Target override will not be provided DEBUG: adding the default universal variant DEBUG: Reading variant descriptions from /opt/local/var/macports/sources/rsync.macports.org/release/ports/_resources/port1.0/variant_descriptions.conf DEBUG: Requested variant darwin is not provided by port libtool. DEBUG: Requested variant i386 is not provided by port libtool. DEBUG: Requested variant macosx is not provided by port libtool. DEBUG: No need to upgrade! libtool 2.2.6b_0 >= libtool 2.2.6b_0 ---> Computing dependencies for exempi DEBUG: Searching for dependency: autoconf DEBUG: Found Dependency: receipt exists for autoconf DEBUG: Searching for dependency: automake DEBUG: Found Dependency: receipt exists for automake DEBUG: Searching for dependency: libtool DEBUG: Found Dependency: receipt exists for libtool DEBUG: Executing org.macports.main (exempi) ---> Fetching exempi DEBUG: Executing org.macports.fetch (exempi) ---> Verifying checksum(s) for exempi DEBUG: Executing org.macports.checksum (exempi) ---> Checksumming exempi-2.1.1.tar.gz DEBUG: Correct (md5) checksum for exempi-2.1.1.tar.gz DEBUG: Correct (sha1) checksum for exempi-2.1.1.tar.gz DEBUG: Correct (rmd160) checksum for exempi-2.1.1.tar.gz ---> Extracting exempi DEBUG: Executing org.macports.extract (exempi) ---> Extracting exempi-2.1.1.tar.gz DEBUG: setting option extract.args to /opt/local/var/macports/distfiles/exempi/exempi-2.1.1.tar.gz DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work" && /usr/bin/gzip -dc /opt/local/var/macports/distfiles/exempi/exempi-2.1.1.tar.gz | /usr/bin/gnutar --no-same-owner -xf -' DEBUG: Executing org.macports.patch (exempi) ---> Applying patches to exempi ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files /patch-source__common__LargeFileAccess.cpp DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1' patching file source/common/LargeFileAccess.cpp ---> Applying /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files /patch-source__XMPFiles__FileHandlers__Makefile.am DEBUG: Environment: MACOSX_DEPLOYMENT_TARGET='10.6' DEBUG: Assembled command: 'cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1' can't find file to patch at input line 3 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig 2009-03-12 00:59:21.000000000 +0000 |+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02 21:58:49.000000000 +0100 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored Error: Target org.macports.patch returned: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files /patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1 Command output: can't find file to patch at input line 3 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig 2009-03-12 00:59:21.000000000 +0000 |+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02 21:58:49.000000000 +0100 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored DEBUG: Backtrace: shell command " cd "/opt/local/var/macports/build/_opt_local_var_macports_sources_rsync.macports.org_release_ports_graphics_exempi/work/exempi-2.1.1" && /usr/bin/patch -p1 < '/opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files /patch-source__XMPFiles__FileHandlers__Makefile.am'" returned error 1 Command output: can't find file to patch at input line 3 Perhaps you used the wrong -p or --strip option? The text leading up to this was: -------------------------- |--- bogus/source/XMPFiles/FileHandlers/MakeFile.am.orig 2009-03-12 00:59:21.000000000 +0000 |+++ bogus/source/XMPFiles/FileHandlers/MakeFile.am 2009-10-02 21:58:49.000000000 +0100 -------------------------- File to patch: Skip this patch? [y] Skipping patch. 1 out of 1 hunk ignored while executing "command_exec patch "" "< '$patch'"" (procedure "portpatch::patch_main" line 33) invoked from within "$procedure $targetname" Warning: the following items did not execute (for exempi): org.macports.activate org.macports.patch org.macports.configure org.macports.build org.macports.destroot org.macports.install Error: Status 1 encountered during processing. }}} BTW. Please, can you advice me how to properly install ncursesw. -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:4> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch (Snow Leopard 64-bit) ---------------------------+------------------------------------------------ Reporter: motya@… | Owner: devans@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: exempi ---------------------------+------------------------------------------------ Comment(by motya@…): BTW I have all patch-files in port directory: 'ls /opt/local/var/macports/sources/rsync.macports.org/release/ports/graphics/exempi/files/' prints : {{{ patch-source__XMPFiles__FileHandlers__Makefile.am patch-source__XMPFiles__FormatSupport__Makefile.am patch-source__XMPFiles__FormatSupport__Reconcile_Impl.cpp patch-source__common__LargeFileAccess.cpp }}} -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:5> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch (Snow Leopard 64-bit) ---------------------------+------------------------------------------------ Reporter: motya@… | Owner: devans@… Type: defect | Status: new Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Keywords: | Port: exempi ---------------------------+------------------------------------------------ Comment(by motya@…): Also, $ file /opt/local/bin/* | grep 386 prints: /opt/local/bin/daemondo (for architecture i386): Mach-O executable i386 $ file /opt/local/lib/* | grep 386 prints nothing Thank you for your help! -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:6> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch (Snow Leopard 64-bit) ----------------------------+----------------------------------------------- Reporter: motya@… | Owner: devans@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Resolution: fixed | Keywords: Port: exempi | ----------------------------+----------------------------------------------- Changes (by jmr@…): * status: new => closed * resolution: => fixed Comment: You probably should have mentioned that you are using a case-sensitive filesystem (that's an uncommon configuration). r62168 -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:7> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch on case-sensitive filesystem ----------------------------+----------------------------------------------- Reporter: motya@… | Owner: devans@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Resolution: fixed | Keywords: Port: exempi | ----------------------------+----------------------------------------------- -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:8> MacPorts <http://www.macports.org/> Ports system for Mac OS
#23061: exempi build fails on patch on case-sensitive filesystem ----------------------------+----------------------------------------------- Reporter: motya@… | Owner: devans@… Type: defect | Status: closed Priority: Normal | Milestone: Component: ports | Version: 1.8.1 Resolution: fixed | Keywords: Port: exempi | ----------------------------+----------------------------------------------- Comment(by motya@…): Yay! Thanks. :) -- Ticket URL: <http://trac.macports.org/ticket/23061#comment:9> MacPorts <http://www.macports.org/> Ports system for Mac OS
participants (1)
-
MacPorts